2A9RC-SFT722051Helius Lite Smart Brushless Motor Treadpad Treadmill

Hybrid Connected Folding Treadmill SF-T722051 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: [email protected] or 1-877-90SUNNY (877-907-8669). 1 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic precautions should always be followed, including the following: Read all instructions before using this treadmill. DANGER – To reduce the risk of electric shock: 1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning. WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons: 1. The treadmill should never be left unattended when plugged in. Unplug from outlet when not in use and before putting on or taking off parts. 2. Use this treadmill only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 3. Never operate this treadmill if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this treadmill to a service center for examination and repair. 4. Keep the cord away from heated surfaces. 5. Never operate the treadmill with the air openings blocked. Keep the air openings free of lint, hair, and alike items. 6. Never drop or insert any object into any opening. 7. Do not use outdoors. 8. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 9. To disconnect, turn the treadmill off, then remove the plug from the outlet. 10. Connect this treadmill to a properly grounded outlet only. See grounding instructions. 11. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Keep children under the age of 8 away from this machine. 12. Household use only. 13. REMOVE CONTROL BOX (OR KEY, OR SAFETY PIN, AS APPLICABLE) WHEN NOT IN USE, AND STORE OUT OF REACH OF CHILDREN. 14. Do not carry this appliance by supply cord or use cord as a handle. 15. The total mass and the total surface area (e.g. foot print) of equipment is 43.5KG/1450*680*1030MM. 16. Cleaning and user maintenance shall not be made by children without supervision. 17. WARNING! Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or death. If you feel faint stop exercising immediately. 18. Always attach the safety pull pin rope to your clothing when using the treadmill. If the treadmill should suddenly increase in speed due to an electronics failure or the speed being inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged from the console. 19. In case of any Abnormality during the use process, grasping the handlebar and jumping onto the two edgings, then turn off the treadmill. 20. Maximum allowed running surface lateral is 1200*420MM. 21. When you want to emergency stop the machine, you can pull out the safety key.and before running, please check if the safety key can use normal . 22. Warning: Electric shock hazard, where the appliance is used without the earth connection. CAUTION: To avoid injury, use extreme caution when stepping onto or off of a moving belt. Read instruction manual 2 before using. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1. Before starting any exercise program, you should consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level. 2. Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult your physician before continuing with your exercise program. 3. Keep children and pets away from the equipment. The equipment is designed for adult use only. 4. Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 8 feet (240CM) of free space behind it and 2 feet (60CM) on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill. 5. Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear. 6. Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue use of the equipment immediately and do not use until the problem has been rectified. 7. Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment. 8. Do not place fingers or objects into the moving parts of the equipment. 9. The maximum weight capacity of this unit is 120 KG. 10. This equipment is not s…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix External Photos for GZCR2211001471HS Test Model No.: TWD242A SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4

Label and location:

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 2 Appendix Internal Photos for GZCR2211001471HS Test Model No.: TWD242A SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 2 EUT Constructional Details (EUT Photos)

Page 1 of 4 Xiamen Mydo Sports Equipment Co., Ltd No. 30, Bannan Road, Dongfu Street, Haicang District, Xiamen, Fujian, China Antenna Specification No. Contents Number of Page Page Code 1 Antenna describe 2 2 2 External view drawing 2 2 3 Return loss 3 3 4 2D Antenna Pattern 3 4 Page 2 of 4 Xiamen Mydo Sports Equipment Co., Ltd No. 30, Bannan Road, Dongfu Street, Haicang District, Xiamen, Fujian, China 1.Antenna describe. Antenna type PCB Antenna Antenna plate Monoploe Make name/model name 2.4G_1_PIA Antenna gain 0dBi Frequency range 2400Mhz-2483.5Mhz Antenna impedance 50Ω V.S.W.R <= 2.0 Max Return Loss -9.7dB Connector type Direct 2.External view drawing. Company：mm Page 3 of 4 Xiamen Mydo Sports Equipment Co., Ltd No. 30, Bannan Road, Dongfu Street, Haicang District, Xiamen, Fujian, China 3.Return loss. 4.2D Antenna Pattern. Page 4 of 4 Xiamen Mydo Sports Equipment Co., Ltd No. 30, Bannan Road, Dongfu Street, Haicang District, Xiamen, Fujian, China

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221100147103 Page: 1 of 11 FCC ID: 2A9RC-SFT722051 Ricky Liu Manager RF EXPOSURE EVALUATION REPORT Application No.: GZCR2211001471HS Applicant:Sunny Health & Fitness Address of Applicant:218 Turnbull Canyon Road, City of Industry, CA 91745, United States of America. Manufacturer:Amoy YG Sports Technology Co., Ltd. Address of Manufacturer:Room 505, North of Chengye Building, Pioneer Park, Torch High-tech Zone, Xiamen, China. Factory:Xiamen Mydo Sports Equipment Co., Ltd Address of Factory:No. 30, Bannan Road, Dongfu Street, Haicang District, Xiamen, Fujian, China Equipment Under Test (EUT): EUT Name:Interactive Slim Treadmill with Bluetooth Model No.: TWD242A, SF-T722051, SF-T722851, TWD242, B0B8F4SKJ8   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: Standard(s) : 47 CFR Part 2.1093 Date of Receipt: 2022-11-16 Date of Evaluation: 2023-05-06 to 2023-05-06 Date of Issue: 2023-05-06 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221100147103 Page: 2 of 11 Revision Record VersionReport No.DateRemark 01GZCR2211001471032023-05-06Original Authorized for issue by: Jim Li/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221100147103 Page: 3 of 11 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure 47 CFR Part 2.1093 47 CFR Part 2.109347 CFR Part 2.1093Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: TWD242A, SF-T722051, SF-T722851, TWD242, B0B8F4SKJ8, TM30 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on appearance decoration, color and model number. Therefore, only one model TWD242A was evaluated in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221100147103 Page: 4 of 11 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5Technical Requirements Specification..................................................................................................7 5.1RF Exposure Evaluation....................................................................................................................7 5.1.1Limit & Test Method......................................................................................................................7 5.1.2Conclusion..................................................................................................................................10 6EUT Constructional Details (EUT Photos)...........................................................................................11 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221100147103 Page: 5 of 11 4General Information 4.1Details of E.U.T. Power supply:AC 110V, 50-60Hz for main unit (receiver only). DC 3V = Size "AAA" battery 1.5V x 2pcs for remote control (transmitter) Cable(s):AC mains, 3 wires, 2.1m, unshielded. Operation Frequency:2450MHz Modulation Type:GFSK Number of Channels:1 Antenna Type:PCB Antenna Antenna Gain:0 dBi Remark:There is only a receiver in main unit which evaluated in test report GZCR221100147101. 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555Fax: +86 20 82075059 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 1.1 Report No.: GZCR221100147103 Page: 6 of 11 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221100147102 Page: 1 of 30 FCC ID: 2A9RC-SFT722051 Ricky Liu Manager TEST REPORT Application No.: GZCR2211001471HS Applicant:Sunny Health & Fitness Address of Applicant:218 Turnbull Canyon Road, City of Industry, CA 91745, United States of America. Manufacturer:Amoy YG Sports Technology Co., Ltd. Address of Manufacturer:Room 505, North of Chengye Building, Pioneer Park, Torch High-tech Zone, Xiamen, China. Factory:Xiamen Mydo Sports Equipment Co., Ltd Address of Factory:No. 30, Bannan Road, Dongfu Street, Haicang District, Xiamen, Fujian, China Equipment Under Test (EUT): EUT Name:Helius Lite Smart Brushless Motor Treadpad Treadmill Model No.: TWD242A, SF-T722051, SF-T722851, TWD242, B0B8F4SKJ8, TM30   Please refer to section 2 of this report which indicates which item was actually tested and which were electrically identical. Trade Mark: Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2022-11-16 Date of Test: 2022-12-23 to 2023-01-07 Date of Issue: 2023-05-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221100147102 Page: 2 of 30 Revision Record VersionReport No.DateRemark 01GZCR2211001471022023-05-06Original Authorized for issue by: Jim Li/Project Engineer Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221100147102 Page: 3 of 30 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult 20dB Bandwidth ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions Below 1GHz ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Radiated Emissions Above 1GHz 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section.  Declaration of EUT Family Grouping: Model No.: TWD242A, SF-T722051, SF-T722851, TWD242, B0B8F4SKJ8, TM30 According to the declaration from the applicant, the electrical circuit design, layout, components used and internal wiring were identical for all models, with only difference on appearance decoration, color and model number. Therefore, only one model TWD242A was tested in this report. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 1.1 Report No.: GZCR221100147102 Page: 4 of 30 3Contents Page 1Cover Page...............................................................................................................................................1 2Test Summary..........................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................6 4.1Details of E.U.T.................................................................................................................................6 4.2Description of Support Units..............................................................................................................6 4.3Measurement Uncertainty.................................................................................................................6 4.4Test Location.....................................................................................................................................6 4.5Test Facility.......................................................................................................................................7 4.6Deviation from Standards..................................................................................................................7 4.7Abnormalities from Standard Conditions...........................................................................................7 5Equipment List.........................................................................................................................................8 6Radio Spectrum Technical Requirement.............................................................................................10 6.1Antenna Requirement......................................................................................................................10 6.1.1Test Requirement:.......................................................................................................................10 6.1.2Conclusion..................................................................................................................................10 7Radio Spectrum Matter Test Results...................................................................................................11 7.120dB Bandwidth..............................................................................................................................11 7.1.1E.U.T. Operation.........................................................................................................................11 7.1.2Test Mode Description..........…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 2 Appendix Test Setup Photo for GZCR221100147102 Test Model No.: TWD242A SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 2 Test Setup Photo Field Strength of the Fundamental Signal (15.249(a)) & Restricted Band Around Fundamental Frequency & Radiated Emissions Above 1GHz Radiated Emissions Below 1GHz