2A9RT-DX19732Remote Control Rechargeable Butt Plug

PMN:Remote Control Rechargeable Butt Plug Item No.: DX-1973-2 1. Use as a Remote Control Massaging Butt Plug with 12 vibrating and 3 Thrusting modes 2.Power Supply: both the remote part and the receiver part are rechargeable Remote Part Receiver part 3.Press the button on the remote for two seconds to make it as “ON”.Press the button to change 12 different vibrating modes and Press the to change 3 thrusting modes. 4.Press the button on the receiver for two seconds to make it as “ON” 5.Use the button on the remote to enjoy 12 different vibrating modes and Press the to change 3 thrusting modes. 6. Press the button on the remote for two seconds to make it as “OFF” 7. Press the button on the receiver for two seconds to make it as “OFF” When not in use,pls storage them in good conditions. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  -Reorient or relocate the receiving antenna.  -Increase the separation between the equipment and receiver.  -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ISED Statement English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Sincerely, Name/Title： Romeo Jiang/CEO Company: Bestgreen Novelties Company Limited Address: 22 Ke Kan Road, Dakan Cun, XiLi, Nan Shan District, Shenzhen, Guangdong, China 518055 Phone: +86 0755 26554359 Fax: N/A E-Mail: [email protected]

FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Receiving unit FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Photo 5 Appearance of EUT

FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Appendix IFCC ID&IC Label FCC ID: 2A9RT-DX19732 IC:29794-DX19732 HVIN/Mode: DX-1973-2 FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Appendix II ID&IC Label Location ID&IC LOCATION

FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 6 Internal of EUT Photo 7 Internal of EUT FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Photo 8 Internal of PCB&Battery Photo 9 Internal of PCB&Battery Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0299-10 Page: 1 of 5 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong,China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 1. Client Information Applicant : Bestgreen Novelties Company Limited Address : 22 Ke Kan Road, Dakan Cun, XiLi, Nan Shan District, Shenzhen, Guangdong, China 518055 Manufacturer : Bestgreen Novelties Company Limited Address : 22 Ke Kan Road, Dakan Cun, XiLi, Nan Shan District, Shenzhen, Guangdong, China 518055 2. General Description of EUT EUT Name : Remote Control Rechargeable Butt Plug HVIN/Model No. : DX-1973-2 Model Difference : ---- Product Description : Operation Frequency: 433.9 MHz RF Output Power: 62.57 dBuV/m (PK Max.) 53.30 dBuV/m (AV Max.) Antenna Gain: Wire Antenna(-10.18 dBi) Modulation Type: OOK Power Rating : Input: DC 5V DC 3.7V by 50mAh Li-ion battery Software Version : v1.0 Hardware Version : v1.0 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202211-0299-10 Page: 2 of 5 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR Report No.: TBR-C-202211-0299-10 Page: 3 of 5 TB-RF-074-1.0 2. Calculation: Frequency (MHz) Max. Output Power (dBuV/m) Max. Output Power (dBm) Tolerance ± (dB) Output power (Max. Turn-up Procedure) (mW) Calculation Value Threshold Value 433.9MHz 62.57 -37.39 -37±1 0.0003 0 3.0 Note: For conducted measurements below 1000 MHz, the field strength shall be computed as specified in item d), and then an additional 4.7 dB shall be added as an upper bound on the field strength that would be observed on a test range with a ground plane for frequencies between 30 MHz and 1000 MHz, or an additional 6 dB shall be added for frequencies below 30 MHz. So: EIRP=E+20log3-104.8-(4.7 or 6) Note: At separation distance of ≤5 mm Report No.: TBR-C-202211-0299-10 Page: 4 of 5 TB-RF-074-1.0 The RF Exposure Evaluation for IC: SAR Test Exclusion Calculations 3. IC: According to RSS-102 — Radio Frequency (RF) Exposure Compliance of Radio Communication Apparatus (All Frequency Bands) Issue 5: March 19, 2015 Clause 2.5.1: Exemption limits for Routine Evaluation – SAR Evaluation SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in Table 1. Table 1: SAR evaluation — Exemption limits for routine evaluation based on frequency and separation distance Frequency (MHz) Exemption Limits (mW) At separation distance of ≤5 mm At separation distance of 10 mm At separation distance of 15 mm At separation distance of 20 mm At separation distance of 25 mm ≤300 71 mW 101 mW 132 mW 162 mW 193 mW 450 52 mW 70 mW 88 mW 106 mW 123 mW 835 17 mW 30 mW 42 mW 55 mW 67 mW 1900 7 mW 10 mW 18 mW 34 mW 60 mW 2450 4 mW 7 mW 15 mW 30 mW 52 mW 3500 2 mW 6 mW 16 mW 32 mW 55 mW 5800 1 mW 6 mW 15 mW 27 mW 41 mW Table 1: SAR evaluation — Exemption limits for routine evaluation based on frequency and separation distance Frequency (MHz) Exemption Limits (mW) At separation distance of 30 mm At separation distance of 35 mm At separation distance of 40 mm At separation distance of 45 mm At separation distance of ≥50 mm ≤300 223 mW 254 mW 284 mW 315 mW 345 mW 450 141 mW 159 mW 177 mW 195 mW 213 mW 835 80 mW 92 mW 105 mW 117 mW 130 mW 1900 99 mW 153 mW 225 mW 316 mW 431 mW 2450 83 mW 123 mW 173 mW 235 mW 309 mW 3500 86 mW 124 mW 170 mW 225 mW 290 mW 5800 56 mW 71 mW 85 mW 97 mW 106 mW Report No.: TBR-C-202211-0299-10 Page: 5 of 5 TB-RF-074-1.0 4. Calculation: Frequency (MHz) Max. Output Power (dBuV/m) Max. Output Power (dBm) Tolerance ± (dB) Antenna Gain (dBi) Output power (Max. Turn-up Procedure) (mW) Limit (mW) 433.9 62.57 -37.39 -37±1 -10.18 0.0003 52 Note: For conducted measurements below 1000 MHz, the field strength shall be computed as specified in item d), and then an additional 4.7 dB shall be added as an upper bound on the field strength that would be observed on a test range with a ground plane for frequencies between 30 MHz and 1000 MHz, or an additional 6 dB shall be added for frequencies below 30 MHz. So: EIRP=E+20log3-104.8-(4.7 or 6) Note: At separation distance of ≤5 mm 5. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 and the RSS-102§4 Table 4 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06, No SAR is required. -----END OF REPORT-----

ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page1of9 TestingReport CustomerName:BestgreenNoveltiesCompanyLimited ProductName:433module SampleModel:DX-433RF ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-2021 IssueDate:2023.01.10 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page2of9 Version VersionNo.DateDescriptionFormulateApproval A02023.01.10Forthefirsttime,formulateJacksonEason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4EUTsetupphotooffreespaceOTAtesting.........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................7 3.3.1Typicalfreespaceefficiencyandgain......................................................................7 3.3.2Typicalfreespaceradiationpattern...........................................................................8 （Thefollowingisblank）................................................................................................................9 ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page3of9 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment AlltheequipmentusedinthereportisfixedinZoneB,WestSideof1/F,Building1, TingweiIndustrialPark,No.6LiufangRoad,Bao'anDistrict,Shenzhen 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page4of9 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date OTATest System RayZone-5000 RFI-LAB-RF -D00 GTS2021.3.152023.3.14 Network Analyzer E5071C RFI-LAB-RF -D01 KEYSIGHT2022.5.132023.5.12 1.4Testenvironment Temperature 23.8°C Humidity 57%RH Pressure 100.15kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page5of9 2.SampleInformation 2.1Clientinformation Name BestgreenNoveltiesCompanyLimited Address 22KeKanRoad,DakanCun,XiLi,NanShanDistrict,Shenzhen, Guangdong,China518055 Contacts / Tel / E-mail / Manufacturer / 2.2DescriptionofEUT(S) ProductName 433module SampleModel DX-433RF AntennaSize / SerialNo. / AntennaType ExternalAntenna TestItem Antennagain;Efficiency;Radiationpattern FrequencyRange 428-438MHz ReceivedDate 2023.01.10 TestDate 2023.01.10 Remark ThelengthoftheRFcableis45mm ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page6of9 2.3EUTappearance 2.4EUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page7of9 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-2021 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty Antennagain±0.72dB Radiationefficiency±0.72dB 3.3Testdata 3.3.1Typicalfreespaceefficiencyandgain Frequency/MHz 428429430431432433434435436437438 PeakGain/dBi -10.87-10.84-10.73-10.72-10.65-10.55-10.51-10.49-10.36-10.29-10.18 Efficiency/% 2.973.003.043.063.083.143.173.203.243.323.37 ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page8of9 3.3.2Typicalfreespaceradiationpattern (1)X-ZPlane(unit:dBi): (2)Y-ZPlane(unit:dBi): ReportNo.:RFI-LAB-RF-202301-AA08 QP030-E41 Page9of9 (3)X-YPlane(unit:dBi): (4)TypicalFreeSpace3DRadiationPatternat433MHz(unit:dBi): -------------------------------------------------End------------------------------------------------ （Thefollowingisblank）

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0299-25 Page: 1 of 33 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 Report No. : TBR-C-202211-0299-25 Applicant : Bestgreen Novelties Company Limited Equipment Under Test (EUT) EUT Name : Remote Control Rechargeable Butt Plug Model No. : DX-1973-2 Series Model No. : ---- Brand Name : ---- Sample ID : 202211-0299-8-1#& 202211-0299-8-2# Receipt Date : 2022-12-06 Test Date : 2022-12-06 to 2022-12-27 Issue Date : 2023-01-17 Standards : FCC Part 15, Subpart C (15.231(a)) RSS-210 Issue 10 December 2019 RSS-Gen Issue 5 March 2019 Test Method : ANSI C63.10:2013 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC requirements Test/Witness Engineer : Seven Wu Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202211-0299-25 Page: 2 of 33 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 6 1.5 Description of Test Mode .................................................................................................... 6 1.6 Description of Test Software Setting .............................................................................. 7 1.7 Measurement Uncertainty ................................................................................................ 7 1.8 Test Facility ........................................................................................................................ 8 2. TEST SUMMARY ....................................................................................................................... 9 3. TEST SOFTWARE ..................................................................................................................... 9 4. TEST EQUIPMENT .................................................................................................................. 10 5. CONDUCTED EMISSION TEST ........................................................................................... 12 5.1 Test Standard and Limit .................................................................................................... 12 5.2 Test Setup ........................................................................................................................... 12 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 13 5.5 Test Data ............................................................................................................................. 13 6. RADIATED EMISSION TEST ................................................................................................ 14 6.1 Test Standard and Limit .................................................................................................... 14 6.2 Test Setup ........................................................................................................................... 15 6.3 Test Procedure ................................................................................................................... 17 6.4 Deviation From Test Standard ......................................................................................... 17 6.5 EUT Operating Condition ................................................................................................. 17 6.6 Test Data ............................................................................................................................. 17 7. BANDWIDTH ............................................................................................................................ 18 7.1 Test Standard and Limit .................................................................................................... 18 7.2 Test Setup ........................................................................................................................... 18 7.3 Test Procedure ................................................................................................................... 18 7.4 Deviation From Test Standard ......................................................................................... 18 7.5 EUT Operating Condition ................................................................................................. 18 Report No.: TBR-C-202211-0299-25 Page: 3 of 33 TB-RF-074-1.0 7.6 Test Data ............................................................................................................................. 18 8. RELEASE TIME MEASUREMENT ....................................................................................... 19 8.1 Test Standard and Limit ......…

Text truncated - open the document above for the full version.

FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2A9RT-DX19732 & IC:29794-DX19732 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Below 1 GHz)