2A9TE-IDEA16Remote control

® IDEA16/IDEA36 EN Instruction Manual DISCLAIMER Preface Important Statement The battery is made of the lithium-polymer battery Flight Environment Store Properly Thank you for purchasing the LE-IDEA series drone.Please read this manual carefully before operating it, and please keep this manual properly for future adjustment and maintenance. The drone is a high-risk good, it must be away from the crowd when flying. Artificial assembly or damage, electronic control, or improper operation which not allowed, all of them are likely to cause damage to the aircraft, personal injury, or other unpredictable accidents. Pilots must be careful and need to understand the responsibility for accidents due to their own negligence. Lithium batteries are different from the general battery, which consists of a thin layer of thin paper wrapped with its chemical endoplasm. Which reduces its weight, but makes it more vulnerable in the face of rough or inappropriate operations. The inappropriate operation of this battery will cause an explosion. (1)Away from obstacles and crowds The flying drone has an uncertain flight speed and state, there is a potential risk. Fly away from the crowds, high-rise buildings, high-voltage wires, etc., meanwhile, avoiding flying in windy, rainy, thunderstorms, and other bad weather to ensure the safety of pilots, the surrounding population, and the property. (2)Away from the damp environment The interior of the drone is made up of many sophisticated electronic components and mechanical parts,so it is necessary to prevent the aircrat from being damp or water infiltration to avoid accidents of mechanical and electronic parts. (3)Safe operation Please operate the drone according to your own status and fight sill. Fatigue, poor spirit, or improper operation will increase the risk of an accident. (4)Keep away from high-speed rotating parts When the propellers are in high-speed spinning, please keep the drone away from the pilot, the surrounding, crowd, and objects to avoid danger and damage. (5) Keep away from heat The drone is composed of metal, fiber, plastic, electronic components, and other materials, so you should keep it away from heat sources and avoid sun exposure and high temperature to avoid the deformation of the drone. This product is not a toy, it integrates expertise in mechanics, electronics, aerodynamics, high-frequency launching, etc. This drone integrates precise equipment, which requires proper assembly and commissioning to avoid accidents. The drone holder must operate the drone in a safe way, improper handling will cause serious personal injury or property damage. It may also be lost due to incorrect operation. This product is suitable for people who have experience in operating drones and are over 14 years old. If there is a problem during use, operation or maintenance, please contact your local sales agent or retailer, or keep in touch with the person in charge of our company. Please use only original parts and accessories. Please keep the packaging and this user manual for future reference. Any questions we would like to hear from you! Please include your order number when you contact us at email (Customer service email address: [email protected], 24 Hr/7 Day). 1. 2. 3. 4. 5. 6. ● Avoid flying over or near obstacles, crowds, high voltage power lines, trees, airports, or bodies of water. ● DO NOT fly near strong electromagnetic sources such as power lines and base stations as it may affect the onboard compass. ● DO NOT use the drone in adverse weather conditions such as rain, snow, fog, and strong wind. SAFETY PRECAUTIONS 1. If the device is not going to be used for an extended period of time, remove batteries to prevent potential dama: battery leakage. 2. Please do not leave batteries exposed to direct sunlight. 3. Do not immerse the batteries in water or allow them to get wet. 4. Please keep the battery out of reach of children or pets. -1- Short press to take a photo Press and hold for 3 seconds to record Fine-tuning key (Press and hold) One key take-off/landing Headless mode Speed regulation Switch Lens up Roll Lens down Right joystick Left joystick AA 1.5V AA 1.5V AA 1.5V BATTERY CHARGING METHOD: Use carefully When charging the rechargeable battery, do not use it for children alone, it must be carried out under the supervision of an adult, and it must be kept away from flammable materials when charging. Please do not short circuit or squeeze the battery to avoid explosion. The power terminals should not be taken out of the model, and the terminals should not be short-circuited; do not short-circuit, disassemble, or throw the battery into fire; do not place the battery in a high-temperature, heated place (such as in a fire or near an electric heating device). The model can only use the recommended charger. Please regularly check whether the wires, plugs, shells and other parts of the charger are damaged. If any damage is found, stop using it until the repair is complete. The charger is not a toy; the charger should only be used indoors. The battery after flight needs to be charged and then stored. If it is not used for a long time, it is recommended to charge the battery at least once every 3 months to avoid over-discharge of the battery which would cause permanent damage to the battery. 1. First, connect your USB cable to the drone battery, then connect it to your favorite charging source. 2. The red light is on when the battery is charging, and the green light is always on when the battery is fully charged. Battery charging time is approximately 120 minutes. ● ● ● ● ● ● USB charging cable Drone’s battery Adapter (sold separately) ● Remove and put the battery in the correct way ● Non-rechargeable batteries cannot be charged ● The rechargeable battery can only be charged under the supervision of an adult ● Different types of batteries or old/new batteries cannot be mixed ● Only batteries of the same model or equivalent to the recommended model can be used …

Text truncated - open the document above for the full version.

ShenzhenChuangjianTechnologyCo.,Ltd. DeclarationonModelDifferences We, GuangzhouLewuInformationTechnologyCo.,Ltd. 4F,No.15,NorthofXinxing1stRoad,XinningCommittee,FengxiangStreet,Chenghai District,Shantou,China Declarethatthefollowingproduct(s): FCCID:2A9TE-IDEA16 ProductName:Remotecontrol ModelNo.:Idea16,idea1,idea2,idea3,idea4,idea5,idea6,idea7,idea8,idea9,idea10, idea11,idea12,idea13,idea15,idea17,idea18,idea19,idea20,idea21,idea23, idea24,idea25,idea26,idea27,idea28,idea29,idea30,idea31,idea32,idea33, idea34,idea35, Utilizetheidenticalcircuitdesign,PCBlayout,shieldingandinterfacewith(Idea16),onlythe modelnumberandappearanceshapedifferent.Thereforethisapplicationcanberegarded asidenticalinperformancetothesubmittedtestsample. Themanufacturerwouldtakealltheresponsibilitiesfortheaboveproduct(s). Forandonbehalfof Authorizedperson Name:MingRuiWang Position:Manager Dateofissue:2023-01-11 *IherebydeclarethatIamentitledtosignonbehalfoftheapplicantandthattheinformationsuppliediscorrectandcomplete.

GuangzhouLewuInformationTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2023-01-06 Subject;RequestforConfidentiality FCCID:2A9TE-IDEA16 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram OperationalDescription SWSECURITYDESCRIPTION PartsList Tuneup Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:MingRuiWang Title:Manager

GuangzhouLewuInformationTechnologyCo.,Ltd. LetterofAuthorization Company:GuangzhouLewuInformationTechnologyCo.,Ltd. Address:4F,No.15,NorthofXinxing1stRoad,XinningCommittee,Fengxiang Street,ChenghaiDistrict,Shantou,China ProductName:Remotecontrol ModelNumber(s):Idea16,idea1,idea2,idea3,idea4,idea5,idea6,idea7,idea8, idea9,idea10,idea11,idea12,idea13,idea15,idea17,idea18,idea19,idea20,idea21, idea23,idea24,idea25,idea26,idea27,idea28,idea29,idea30,idea31,idea32, idea33,idea34,idea35, ProductDescription:Remotecontrol WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2023-01-06 Name:MingRuiWang Title:Manager Company:GuangzhouLewuInformationTechnologyCo.,Ltd.

Code:AB-RF-05-b ExternalPhotograph Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

LabelLocationOnEUT Label

Code:AB-RF-05-b InternalPhotograph Code:AB-RF-05-b ANT

RFEXPOSUREEVALUATION FCCID:2A9TE-IDEA16 AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 2420-4.83-4.83 ±1 -3.83050.1293 GFSK2440-5.04-5.04±1 -4.040 5 0.1233 2460-5.32-5.32±1 -4.320 5 0.1163 Result:NoStandaloneSARtestisrequired.

ReportNo.:18220WC20280001FCCID:2A9TE-IDEA16Page1of28 Code:AB-RF-05-b FCCTestReport ClientName: GuangzhouLewuInformationTechnology Co.,Ltd. ClientAddress: 4F,No.15,NorthofXinxing1stRoad,Xinning Committee,FengxiangStreet,Chenghai District,Shantou,China ProductName:Remotecontrol ReportDate:Jan.06,2023 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC20280001FCCID:2A9TE-IDEA16Page2of28 Code:AB-RF-05-b Contents 1.GeneralInformation............................................................................................................................................6 1.1.ClientInformation.....................................................................................................................................6 1.2.DescriptionofDevice(EUT)..................................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest.................................................................................................7 1.4.DescriptionofTestConfiguration..........................................................................................................7 1.5.DescriptionOfTestSetup.......................................................................................................................8 1.6.TestEquipmentList.................................................................................................................................9 1.7.MeasurementUncertainty....................................................................................................................10 1.8.DescriptionofTestFacility....................................................................................................................10 2.SummaryofTestResults.................................................................................................................................11 3.ConductedEmissionTest................................................................................................................................12 3.1.TestStandardandLimit........................................................................................................................12 3.2.TestSetup...............................................................................................................................................12 3.3.TestProcedure.......................................................................................................................................12 3.4.TestData.................................................................................................................................................12 4.RadiationSpuriousEmissionandBandEdge.............................................................................................13 4.1.TestStandardandLimit........................................................................................................................13 4.2.TestSetup...............................................................................................................................................13 4.3.TestProcedure.......................................................................................................................................14 4.4.TestData.................................................................................................................................................15 5.MaximumPeakOutputPowerTest................................................................................................................23 5.1.TestStandardandLimit........................................................................................................................23 5.2.TestSetup...............................................................................................................................................23 5.3.TestProcedure.......................................................................................................................................23 5.4.TestData.................................................................................................................................................23 6.6DBOccupyBandwidthTest...........................................................................................................................24 6.1.TestStandardandLimit........................................................................................................................24 6.2.TestSetup...............................................................................................................................................24 6.3.TestProcedure.......................................................................................................................................24 6.4.TestData.................................................................................................................................................24 7.PowerSpectralDensityTest...........................................................................................................................25 7.1.TestStandardandLimit........................................................................................................................25 7.2.TestSetup...............................................................................................................................................25 7.3.TestProcedure.......................................................................................................................................25 7.4.TestData.................................................................................................................................................25 8.100kHzBandwidthofFrequencyBandEdgeRequirement......................................................................26 8.1.TestStandardandLimit................................................................................................................…

Text truncated - open the document above for the full version.

Page1of23 AppendixTestData ReportNo.:18220WC20280001TestSampleNo.:1-2-2 StartTestDate:2022.12.8FinishTestDate:2022.12.22 TestEngineer:Auditor: Temperature:22.3 °C RelativeHumidity:40% Pressure:1012hPa AppendixA:DTSBandwidth TestResult TestModeAntennaFrequency[MHz] DTSBW [MHz] FL[MHz]FH[MHz]Limit[MHz]Verdict 2.4gAnt1 24200.5322419.8322420.3640.5PASS 24400.7522439.6202440.3720.5PASS 24600.8162459.6162460.4320.5PASS Page2of23 TestGraphs 2.4g_Ant1_2420 2.4g_Ant1_2440 2.4g_Ant1_2460 Page3of23 Page4of23 AppendixB:OccupiedChannelBandwidth TestResult TestModeAntennaFrequency[MHz] OCB[MHz] FL[MHz]FH[MHz] 2.4gAnt1 24201.81882418.79752420.6163 24401.96952438.84992440.8194 24601.33072459.34272460.6734 Page5of23 TestGraphs 2.4g_Ant1_2420 2.4g_Ant1_2440 2.4g_Ant1_2460 Page6of23 Page7of23 AppendixC:Maximumconductedoutputpower TestResultPeak TestModeAntennaFrequency[MHz] ConductedPeak Power[dBm] Conducted Limit[dBm] Verdict 2.4gAnt1 2420-4.83≤30PASS 2440-5.04≤30PASS 2460-5.32≤30PASS Page8of23 TestGraphsPeak 2.4g_Ant1_2420 2.4g_Ant1_2440 2.4g_Ant1_2460 Page9of23 Page10of23 AppendixD:Maximumpowerspectraldensity TestResult TestModeAntennaFrequency[MHz]Result[dBm/3kHz]Limit[dBm/3kHz]Verdict 2.4gAnt1 2420-7.52≤8.00PASS 2440-8.4≤8.00PASS 2460-8.15≤8.00PASS Page11of23 TestGraphs 2.4g_Ant1_2420 2.4g_Ant1_2440 2.4g_Ant1_2460 Page12of23 Page13of23 AppendixE:Bandedgemeasurements TestResult TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t 2.4gAnt1 Low2420-5.06-29.28≤-25.06PASS High2460-5.28-29.6≤-25.28PASS Page14of23 TestGraphs 2.4g_Ant1_Low_2420 2.4g_Ant1_High_2460 Page15of23 AppendixF:ConductedSpuriousEmission TestResult TestMod e Antenn a Frequency[MHz ] FreqRange [MHz] RefLeve l [dBm] Result[dBm ] Limit[dBm ] Verdic t 2.4gAnt1 2420 Reference-5.13-5.13---PASS 30~1000-5.13-68.82≤-25.13PASS 1000~2650 0 -5.13-27.06≤-25.13PASS 2440 Reference-9.29-9.29---PASS 30~1000-9.29-69.21≤-29.29PASS 1000~2650 0 -9.29-38.61≤-29.29PASS 2460 Reference-5.40-5.40---PASS 30~1000-5.40-68.26≤-25.4PASS 1000~2650 0 -5.40-26.87≤-25.4PASS Page16of23 TestGraphs 2.4g_Ant1_2420_0~Reference 2.4g_Ant1_2420_30~1000 2.4g_Ant1_2420_1000~26500 Page17of23 2.4g_Ant1_2440_0~Reference 2.4g_Ant1_2440_30~1000 Page18of23 2.4g_Ant1_2440_1000~26500 2.4g_Ant1_2460_0~Reference Page19of23 2.4g_Ant1_2460_30~1000 2.4g_Ant1_2460_1000~26500 Page20of23 Page21of23 AppendixG:DutyCycle TestResult TestModeAntennaFrequency[MHz] ONTime [ms] Period [ms] DutyCycle [%] DutyCycle Factor[dB] 2.4gAnt1 24200.527.986.5211.86 24400.527.966.5311.85 24600.547.986.7711.69 Page22of23 TestGraphs 2.4g_Ant1_2420 2.4g_Ant1_2440 2.4g_Ant1_2460 Page23of23 ---End---

Code:AB-RF-05-b TestSetupPhotograph PhotoofRadiationEmissionTest