2A9UKPOESW811DINPoE Switch

Regulatory Information FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐ Reorient or relocate the receiving antenna. ‐‐ Increase the separation between the equipment and receiver. ‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. PoE-SW811G-DIN PoE Switch User Guide The specifications and the information of the products mentioned in the manual are for reference only, and may not represent the most recent revision; please check with your dealer for any changes. 1. Introduction 1.1 Package Contents  PoE Switch *1  User’s Manual *1  power adapter *1 If any of these are missing or damaged, please contact your dealer immediately. If possible, retain the packaging, including the original packing material and contents, and repack the product in case there is a need to return it for repair or refund. 1.2 Description Completely plug-and-play –with data and power over Ethernet through one cable, the PoE Switch reduces cabling requirements (and by association, installation time and costs), and eliminates the need for dedicated electrical outlets for a power source. Providing 8 PoE ports, the PoE Switch is ideal for small businesses and workgroups the PoE for compatible wireless access points, IP-based surveillance cameras, or IP phones, in any places easily, efficiently and cost-effectively. 1.3 Features * Up to 30W of PoE power per port * Up to 120W of total PoE power * Complies to IEEE 802.3 af/at PoE+ standard * Power Detection (PD): Only compatible PoE devices will receive power * Safe and Reliable Power to compatible WLAN Access Points * Automatic Detection and Protection of Non–Standard Ethernet Terminals * Supports 10/100/1000 Base-T applications * Compact Design Fits Easily in WLAN Access * Plug-and-Play – no configuration required 1.4 Specification Model PoE-SW811G-DIN 10/100Mbps Copper Ports Port1-8: 8×10/100Base-TX RJ-45 Auto-MDI/MDI-X port(POE) 1000Mbps Copper Ports port 9:1 X 10/100/1000Base-TX RJ- 45 Auto-MDI/MDI-X port SFP/mini-GBIC Slots port 10: 1XSFP port 1000Base-X, Ethernet uplink port LED Power(Orange) 10/100/1000LNK / ACT(Green) Dimension (W x D x H) 138 x 107 x 44 mm, 1U height Weight 0.514kg Power Supply 48-55VDC Power Consumption Idling: 1 W Full load: 120 W PoE Standard IEEE 802.3at, IEEE802.3af PoE Power Output 30W,one port Max PoE Power Supply Type 1/2(+), 3/6(-), Mode-A, End-Span Operaing Temperature –30 °C to +65 °C (-22 °F to +149 °F) Lightning Protection Port Contact discharge: 4 kV Regulation Compliance FCC Part 15 Class B, CE UKCA Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE802.3abGigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus

Shenzhen Rongpu Electronic Technology Co., Ltd Covered Equipment Certification Attestation Letter 6/20/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID:2A9UKPOESW811DIN Shenzhen Rongpu Electronic Technology Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List , the applicant should include an explanation on why the equipment is not “covered” equipment. Shenzhen Rongpu Electronic Technology Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Shenzhen Rongpu Electronic Technology Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Jundong lan Title: Manager Company Name: Shenzhen Rongpu Electronic Technology Co., Ltd Date: 6/20/2026

Shenzhen Rongpu Electronic Technology Co., Ltd DATE: June 20, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Shenzhen DL Testing Technology Co., Ltd. (101-201, Comprehensive Building,Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf acknowledge that all responsibility for complying with the term sand conditions for certification, still resides with Shenzhen Rongpu Electronic Technology Co., Ltd (402 Building 1 Factory Building 1 Baolu Industrial Zone Songbai Road Longteng Community Shiyan Street, Bao'an District Shenzhen City Guangdong, China) <Signature> Name: Jundong lan Title: Manager Applicant Company: Shenzhen Rongpu Electronic Technology Co., Ltd

Shenzhen Rongpu Electronic Technology Co., Ltd Date: June 20, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen DL Testing Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Jundong lan Title: Manager Applicant Company: Shenzhen Rongpu Electronic Technology Co., Ltd

DATE: June 20, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A9UKPOESW811DIN Product Name: PoE Switch Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...)  Schematics  Block diagram  Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name : Jundong lan Title: Manager Company Name: Shenzhen Rongpu Electronic Technology Co., Ltd

Shenzhen Rongpu Electronic Technology Co., Ltd Model Difference Declaration To Whom It May Concern, We, Shenzhen Rongpu Electronic Technology Co., Ltd (PoE Switch); Trade Mark: N/A; Model Number: PoE-SW811G-DIN, PoE-SW802-DIN, PoE-SW803G-DIN, PoE-XXXXXXX(X=A~Z, 0~9); All model's the function, software and electric circuit are the same, only with product model named different. Test sample model: PoE-SW811G-DIN. Please contact me if you have any question. Signature: Date: May 29, 2026 Name: Jundong lan Title: Manager

Page 1 of 3 Annex A External Photos Report No.: DLE-260610002R Test Model: PoE-SW811G-DIN Page 2 of 3 Page 3 of 3

FCC ID LABEL: Ca. 30mm x 40mm Label Location FCC ID: 2A9UKPOESW811DIN

Page 1 of 4 Annex B Internal Photos Report No.: DLE-260610002R Test Model: PoE-SW811G-DIN Page 2 of 4 Page 3 of 4 Page 4 of 4

C DL-Cert ert DL-Cert DL D L-Cert DL-Cert DL-Cer D L-Cert DL-Cert DL-Cert Cert D L-Cert DL-Cert DL-Cert DL-C DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL- DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-C DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Ce L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert D L-Cert DL-Ce DL-Cert DL-Cert DL-Cert D L-Cert DL Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert D L-C L-Cert DL-Cert rt DL-Cer DL Shen zhen DL Testing Technology Co., Ltd. Report No.: DLE-26061000 2R T est Report Tel: 400-688-3552 Web: www.dl-cert.com Email: service@dl -cert.com Page 1 of 23 FCC Part 15B Test Report FCC ID: 2A9UKPOESW81 1DIN Applicant: Shenzhen Rongpu Electronic Technology Co., Ltd Address: 402 Building 1 Factory Building 1 Baolu Industrial Zone Songbai Road Longteng Community Shiyan Street Bao'an District Shenzhen City Guangdong, China Manufacturer: Shenzhen Rongpu Electronic Technology Co., Ltd Address: 402 Building 1 Factory Building 1 Baolu Industrial Zone Songbai Road Longteng Community Shiyan Street Bao'an District Shenzhen City Guangdong, China Product Name: PoE Switch Trade Mark: N/A Model Number: PoE-SW811G-DIN, PoE-SW802-DIN, PoE-SW803G-DIN, PoE-XXXXXXX(X=A~Z, 0~9) Date of Receipt: May 19, 2026 Test Date: May 19, 2026 – June 10, 2026 Date of Report: June 10, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Comprehensive Building, Tongzhou Electronics Longgang Factory Area, No.1 Baolong Fifth Road, Baolong Community, Baolong Street, Longgang District, Shenzhen, China Applicable Standards: FCC Part 15 Subpart B ANSI C63.4-2014 Test Result: Pass Report Number: DLE-260610002R Prepared by(Engineer): Ken Tan Reviewer(Supervisor): Jack Bu Approved(Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. C DL-Cert ert DL-Cert DL D L-Cert DL-Cert DL-Cer D L-Cert DL-Cert DL-Cert Cert D L-Cert DL-Cert DL-Cert DL-C DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL- DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-C DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Ce L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert D L-Cert DL-Ce DL-Cert DL-Cert DL-Cert D L-Cert DL Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert D L-C L-Cert DL-Cert rt DL-Cer DL Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-260610002R Test Report Tel: 400-688-3552 Web: www.dl-cert.com Email: [email protected] Page 2 of 23 Table of Contents Page 1. Test Summary ............................................................................................................................ 4 1.1 Information of the Test Laboratory ......................................................................................... 5 1.2 Measurement Uncertainty ...................................................................................................... 5 2. General Information .................................................................................................................. 6 2.1 General Description of EUT ..................................................................................................... 6 2.2 Description of Test Modes ............................…

Text truncated - open the document above for the full version.

Test Model: PoE-SW811G-DIN Radiated Emission AC Conducted Emission