2A9VJ-FB01Furbulous Box

Furbulous Box The smart-cleaning and packing cat litter box Instruction Manual 23 Product Name: Furbulous Box, the Smart-Cleaning and Packing Cat Litter Box Product Model: FB001 Net Weight: 13.0kg | 28.7lbs Package Weight: 17.0kg | 37.5lbs Dimension (L*W*H): 702mm*450mm*595mm | 27.6"*17.7"*23.4" Voltage: 12VDC Power Rating: 48W Switch Power Adapter Model:HT38C-120400HD INPUT:100-240V~ 50/60Hz 1.0A Max OUTPUT:12.0V----4.0A 48.0W FCC CAUTION: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumérique de la classe B estconformeà la norme NMB-003 du Canada. Les communications effectuées au moyen de cetappareil ne sont pas nécessairement protégées des indiscrétions. The equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Déclarationd'exposition aux radiations: Cetéquipementestconforme aux limitesd'exposition aux rayonnements ISED Canada établies pour unenvironnement non contrôlé. Cetéquipementdoitêtreinstallé et utilisé avec un minimum de20cm de distance entre la source de rayonnement et votre corps. ISED WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Thank you for your purchase! *All images shown are for illustration purposes only. Actual products may vary due to product enhancement. For any discrepancies, please refer to the actual product. If you have any questions, please feel free to contact: [email protected]. 23 Warnings Follow all instructions when setting up and using Furbulous Box. • Cats must weigh 3 lbs. or more to safely use the Furbulous Box in auto-cleaning mode. • Always use clumping cat litter that clumps tight enough to be filtered by the screen. • Always close the Entrance Door before emptying the unwanted litter in the Globe. • Always proceed with auto-packing before emptying to avoid overflow. • Always add new litter to the MAX line and reset cat litter to ensure the accuracy of weight detection. • Do not place the Furbulous Box outdoors, or near a radiator, or excessive dirt or dust, water, heat sources, or in locations subject to shocks, vibrations, condensation, direct sunlight, or rapid changes in temperature or humidity. • Do not place objects weighing over 55 lbs. on the Upper Cover. • Avoid soft or uneven flooring, which may affect the scale sensors at the bottom to detect your cat. If using litter mats or rugs, place them in front of, or completely under, the unit. Do not place mats partially under the unit. Use only low pile (≤0.5 inches) rugs and mats. • Unplug the unit before assembling or disassembling it. • Only use the power supply that comes with this product. Use of any other power supply may result in damage to the product or electric hazards. • Only use Auto-Packing Trash Bag. • Never place the Furbulous Box against a wall or into a corner (should not be touching any walls). • Never wet or submerge the Bottom Base. • Never take out the trash box unless the trash is packed. • Every time you plug or turn on the unit, the Auto-Refill System will start detecting for 25s to make sure the trash bag is installed properly. • Always change the deodorant bar every 30 days to remove unpleasant smells efficiently. • Longer the wait time before auto-cleaning if your cat has diarrhea leaves enough time for litter to clump tightly. • Never a…

Text truncated - open the document above for the full version.

Furbulous Box Slimme Opruimings- en Verpakkingskattenbak Gebruiksaanwijzing Furbulous Box Gebruiksaanwijzing 2 Bedankt voor uw aankoop! *Alle getoonde afbeeldingen zijn alleen ter illustratie. Werkelijke producten kunnen variëren als gevolg van productupgrade. Voor eventuele discrepanties verwijzen we u naar het daadwerkelijke product. Als u nog vragen hebben, neem dan gerust contact op met: [email protected] 3 Waarschuwingen Volg alle instructies strikt bij het instellen en gebruiken van Furbulous Box. · U moet ervoor zorgen dat uw kat1,5kg. of meer moet wegen om de Furbulous Box veilig te gebruiken in de automatische opruimingsmodus. · Gebruik a.u.b. altijd klonterende kattenbakvulling om ervoor te zorgen dat het filterscherm de klonten effectief kan filteren. · Voordat u de kattenbakvulling giet, moet u ervoor zorgen dat u de Toegangsdeur sluit. · Voordat u de kattenbakvulling giet, moet u ervoor zorgen dat u een keer automatisch verpakt om overloop als gevolg van te veel afval in de vuilniszak voorkomen. · U moet ervoor zorgen dat u elke keer de nieuwe kattenbakvulling toevoegt aan de MAX-lijn en eenmaal het Kattenbakvulling Herstellen uitvoert om de nauwkeurigheid van weegfunctie te garanderen. · Plaats de Furbulous Box niet buiten of in de buurt van een radiator, overmatig vuil of stof, waterbronnen, warmtebronnen of op plaatsen die gevoelig zijn voor schokken, trillingen, condensatie, direct zonlicht en snelle veranderingen in temperatuur of vochtigheid. · Plaats geen voorwerpen met een gewicht van meer dan 25kg. op de bovenste dekking. · Plaats niet op zachte of ongelijke vloeren, omdat dit de functionaliteit van de weegschaalsensoren kan beïnvloeden. Als u kattenbakmat of tapijt gebruikt, plaatst deze dan voor of volledig onder het apparaat. Plaats de mat niet gedeeltelijk onder het apparaat. Gebruik alleen tapijt en mat met korte fleece (≤12mm inch). · U moet ervoor zorgen dat u de voeding loskoppelt vóór het monteren en demonteren. · U moet ervoor zorgen dat u alleen speciale vuilniszakkenmodule voor automatische verpakkking gebruikt. · Gebruik alleen de voedingsadapter die bij dit product wordt geleverd. Het gebruik van een andere adapter kan schade aan het product of elektrische schokken veroorzaken. · Houd de Furbulous Box nooit tegen een muur of in een hoek (Het apparaat mag geen enekel muur raken). · Maak de bodembasis nooit nat of dompel deze onder met water. · Trek de vuilniszak niet uit de prullenbak, tenzij het afval is verpakt. · U moet ervoor zorgen dat u de deodorantblok om de 30 dagen vervangt om een effectieve deodoranteffect te garanderen. · Als uw kat diarre heeft, kunt u de wachttijd verlengen vóór het automatisch opruimen op de APP om voldoende tijd te hebben voor het betere klonteren van kattenbakvullingen. · Elke keer dat u een voedingsbron aansluit of het apparaat inschakelt, begint het automatisch invulsysteem gedurende 25 seconden automatisch te detecteren om ervoor te zorgen dat de vuilniszak correct is geïnstalleerd. · Sta nooit toe dat kinderen en personen met verminderde fysieke, zintuiglijke of mentale vermogens of gebrek aan ervaring en kennis de Furbulous Box gebruiken, opruimen of onderhouden zonder toezicht, begeleiding bij veilig gebruik en begrip van de gevaren. Kinderen jonger dan 8 jaar mogen niet blootgesteld worden aan de Furbulous Box. · Laat kinderen nooit spelen met de Furbulous Box. · Probeer de Furbulous Box nooit zelf te demonteren, wijzigen of repareren, tenzij anders vermeld in deze gebruiksaanwijzing. Kinderen mogen niet opruiming en onderhoud uitvoeren zonder toezicht. ·Als het netsnoer beschadigd is, moet het worden vervangen door de fabrikant, zijn serviceagent of vergelijkbaar gekwalificeerde personen om gevaren te voorkomen. · Als u problemen ondervindt bij het gebruik van de Furbulous Box, neem dan onmiddellijk contact met ons op. * Lees de gebruiksaanwijzing zorgvuldig door voordat u het product gebruikt en bewaar deze op de juiste manier. 4 Inhoud Waarschuwing Samenstellen en Zijn Afmeteingen Inhoud van Verpakking Furbulous Box Instellen Introduceer Furbulous Box aan Uw Kat Bedieningspaneel Furbulous Box APP APP-Functies Beveiligingssysteem Opruiming en Onderhoud Veelgestelde Vragen Gratis Retourneren Klantenservice Ons Vinden Certificeringen 4 6 7 8 9 10-11 12 13 14 14 15-16 17 17 17 17 5 Samenstellen Afmetingen Geheel apparaat Trommel Ingang Prullenbak Filterscherm Kattenbakbed Kattenbakmat Lengte 702mm 508mm / / 375.5mm 410mm 422mm / / 660mm Breedte 450mm 450mm 210mm / 241mm 172mm 349mm / / 530mm Hoogte 595mm 450mm 240.5mm 240mm 172.5mm 30.8mm 34mm / 375mm 16.5mm Capaciteit / 60 L / / 6L / / 4.5L / / Bovenst Deksel Manico Bedieningspaneel Prullenbak Weegschaalsensor Nabijheidssensor Deodorantdoos Trommel 6 begane grond tot ingang Max. capaciteit voor kattenbakvulling Afstand van kattenbakvulling tot trommel, als volledig gevuld met kattenbakvulling Inhoud van Verpakking Furbulous Box*1 (incl. filterscherm*1, kattenbakbed*1) Voedingsadapter**1Gebruiksaanwijzing *1 Speciale vuilniszakkenmodule voor automatische verpakkking *1 Deodorantdoos*1 Deodorantblok*3 Kattenbakmat*1 voedingsadapter *4 7 Furbulous Box Instellen Als u de Furbulous Box ontvangt, is de kattenbak bijna volledig gemonteerd en klaar voor gebruik. U kunt op de volgende manieren beginnen met het instellen van uw Furbulous Box. 1.Tijdens de overgangsperiode van de kat, plaats de Furbulous Box op dezelfde plaats als de oude kattenbak. 2.Zorg ervoor dat het apparaat zich op een stevige en vlakke ondergrond bevindt. Vermijd zachte, ongelijke of onstabiele vloeren. Houd het apparaat binnen uit de buurt van direct zonlicht. 3.Plaats het apparaat in de buurt van een stopcontact. Zorg ervoor dat het apparaat niet tegen een muur of in een hoek wordt gehouden (mag geen enekel muur raken). 4.Plaats de kattenbakmat of het tapijt voor of volledig onder het apparaat. Plaats de mat niet gedeeltelijk onder het apparaat. Gebruik alleen tapijten en matten met korte fle…

Text truncated - open the document above for the full version.

Furbulous Network Technology (Shanghai) Co., Ltd. 02/13/2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for 2A9VJ-FB01 Furbulous Network Technology (Shanghai) Co., Ltd., certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) YONGHUI WANG Furbulous Network Technology (Shanghai) Co., Ltd. 02/13/2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for 2A9VJ-FB01 Furbulous Network Technology (Shanghai) Co., Ltd., certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) YONGHUI WANG

Attestation Statements 02/13/2023 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for 2A9VJ-FB01 Furbulous Network Technology (Shanghai) Co., Ltd., the undersigned, hereby authorize WDPASEA GROUP Inc. to act as our designated U.S. agent for service of process, Furbulous Network Technology (Shanghai) Co., Ltd., accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. WDPASEA GROUP Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information： Company name: Furbulous Network Technology (Shanghai) Co., Ltd. Contact Name: YONGHUI WANG Address: Room 1123, Xinye Building, 388 Tianlin Road, Xuhui District, Shanghai 200233, China Telephone No: +86 13817049942 Email: [email protected] U.S. Agent Information: Company Name: WDPASEA GROUP Inc. Address: 21001 72 nd Ave. So. Kent, WA 98032 Contact Name: Steven Zhao Telephone No: 626-329-5567 Email: [email protected] Applicant Signature: Agent Signature: (if the agent is different from the applicant) Applicant printed name: YONGHUI WANG Agent printed name: Steven Zhao

Agent Authorization Letter 02/13/2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Eurofins Electrical Testing Service (Shenzhen) Co. Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Printed: YONGHUI WANG Title: Manager Company name: Furbulous Network Technology (Shanghai) Co., Ltd.

Long Term Confidentiality Request Letter 02/13/2023 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product type：Furbulous Box Model name: FB001 FCC ID: 2A9VJ-FB01 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the -Block Diagram -Schematics -Circuit Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Printed: YONGHUI WANG Title: Manager Company name: Furbulous Network Technology (Shanghai) Co., Ltd.

Photo 1. Description: Front view Photo 2. Description: Rear view Photo 3. Description: Side view Photo 4. Description: Side view Photo 5. Description: Bottom view Photo 6. Description: Top view Photo 7. Description: Accessory view

Photo 1. Description: Power switch view Photo 2. Description: DC inlet and Program input port view Photo 3. Description: Detachable view 1 Photo 4. Description: Detachable view 2 Photo 5. Description: Detachable view 3 Photo 6. Description: Internal view of dustbin Photo 7. Description: Open view of plastic sealing module 1 Photo 8. Description: Open view of plastic sealing module 2 Photo 9. Description: Heating element Photo 10. Description: Drive motor of push rod Photo 11. Description: Internal view 1 Photo 12. Description: Weight sensing PCB Photo 13. Description: Weight sensing PCB Photo 14. Description: Environment sensing PCB Photo 15. Description: Environment sensing PCB Photo 16. Description: Hall sensing PCB Photo 17. Description: Hall sensing PCB Photo 18. Description: Power switch PCB Photo 19. Description: Power switch PCB Photo 20. Description: Main power PCB Photo 21. Description: Main power PCB Photo 22. Description: Internal view 2 of dustbin cover Photo 23. Description: Drive motor PCB of dustbin cover Photo 24. Description: Internal view 3 of drive motors Photo 25. Description: Internal view 4 of DC inlet Photo 26. Description: Internal view 5 of fan motor Description: Fan motor Photo 27. Description: Drive motor of toilet Photo 28. Description: Drive motor of dustbin cover

FCC ID: 2A9VJ-FB01 FCC RF Exposure Evaluation Calculated Data： Mode Frequency （MHz） Max. RF Output Power (dBm) Max. RF Output Power (mW) Antenna Gain (numeric) Evaluation Distance (cm) Power Density (mW/cm2) MPE Limit (mW/cm²) 2.4G Wi-Fi 2412-2462 16.76 47.424 1.58 20 0.015 1 Note: the maximum antenna gain is 2dBi. Result: Compliance, the device meets MPE requirement for Devices Used by the General Public (Uncontrolled Environment) at distance ≥20 cm.

Page 1 of 28 EUROFINS ELECTRICAL TESTING SERVICE (SHENZHEN) CO., LTD. RADIO TEST - REPORT FCC&IC Compliance Test Report for Product name: Furbulous Box Model name: FB001 FCC ID: 2A9VJ-FB01 IC: 29884-FB01 Test Report Number: EFGX23010146-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. Phone: +86-0755-829118671 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, Fax: +86-0755-82910749 No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China Page 2 of 28 Content 1 General Information 3 1.1 Notes 3 1.2 Testing laboratory 4 1.3 Details of applicant 4 1.4 Details of manufacturer 4 1.5 Application details 5 1.6 Test item 5 1.7 Test standards 6 2 Technical test 7 2.1 Summary of test results 7 2.2 Test environment 7 2.3 Measurement uncertainty 7 2.4 Test mode 8 2.5 Test equipment utilized 9 2.6 Auxiliary equipment used during test 10 2.7 Test software information 10 2.8 Test setup 11 2.9 Test results 13 3 Technical Requirement 14 3.1 Conducted emission AC power port 14 3.2 Duty cycle 15 3.3 6dB bandwidth 16 3.4 99% Occupied Bandwidth 17 3.5 DTS fundamental emission output power 18 3.6 Power spectral density 21 3.7 Conducted Band Edge & Conducted Spurious Emissions 24 3.8 Spurious emissions & Restricted Band 25 4 Test Setup Photos 28 5 External Photos 28 6 Internal Photos 28 7 Appendix 28 Test Report No.: EFGX23010146-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 3 of 28 1 General Information 1.1 Notes The results of this test report relate exclusively to the item tested as specified in chapter “Description of test item” and are not transferable to any other test items. Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. is not responsible for any generalisations and conclusions drawn from this report. Any modification of the test item can lead to invalidity of test results and this test report may therefore be not applicable to the modified test item. The test report may only be reproduced or published in full. Reproducing or publishing extracts of the report requires the prior written approval of the Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. This document is subject to the General Terms and Conditions and the Testing and Certification System of Eurofins Electrical Testing Service (Shenzhen) Co., Ltd., available on request or accessible at www.eurofins.com. perator 2023-02-14 Bruce Zheng / Project Engineer Date Eurofins-Lab. Name / Title Signature Technical responsibility for area of testing: 2023-02-14 Albert Xu / Lab Manager Date Eurofins-Lab. Name / Title Signature Test Report No.: EFGX23010146-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 4 of 28 1.2 Testing laboratory Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone : +86-755-82911867 Fax : +86-755-82910749 The Laboratory has passed the Accreditation by the American Association for Laboratory Accrediation (A2LA). The Accreditation number is 5376.01 The Laboratory has been listed by industry Canada to perform electromagnetic emission measurements, The CAB identifier is CN0088 1.3 Details of applicant Name : Furbulous Network Technology (Shanghai) Co., Ltd. Address : Room 1123, Xinye Building, 388 Tianlin Road, Xuhui Dis- trict, Shanghai 200233, China Telephone : ./. Fax : ./. 1.4 Details of manufacturer Name : Suzhou Cleanwell Appliance Co., Ltd. Address : No. 225 Huajin Road, Suzhou New District, Suzhou City, Jiangsu, China Telephone : ./. Fax : ./. Test Report No.: EFGX23010146-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 5 of 28 1.5 Application details Date of receipt of application : 2023-01-10 Date of receipt of test item : 2023-01-10 Date of test : 2023-01-10 to 2023-02-14 Date of issue : 2023-02-14 1.6 Test item Product type : Furbulous Box Model name : FB001 Brand : FURBULOUS Serial number : ./. Ratings : AC 100-240V, 50/60Hz (for adaptor) Test voltage : 120V~, 60Hz Hardware Version : V1.0 Software / Firmware Version : V1.0 FCC ID : 2A9VJ-FB01 IC : 29884-FB01 PMN : Furbulous Box HVIN : FB001 Additional information : The appliance covered by this test report is furbulous box for household and indoor use, which is powered by adaptor. Adaptor information: Model name: HT38C-1204000HD Input: 100-240V~, 50/60Hz 1.0A Max Output: 12V DC, 4.0A, 48W RadioTechnical data Radio Tech. : WLAN 2.4G Modulation : 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-QAM Antenna type : PCB Maximum antenna gain : 2 dBi The above sample(s) and sample information was/were submitted and identified on behalf of the applicant. Eurofins assures objectivity and impartiality of the test, and fulfills the obligation of confidentiality for applicant’s commercial infor- mation and technical documents. Test Report No.: EFGX23010146-IE-01-E02 Eurofins Electrical Testing Service (Shenzhen) Co., Ltd. 1st Floor, Building 2, Chungu, Meisheng Huigu Science and Technology Park, No. 83 Dabao Road, Bao'an District, Shenzhen. P.R.China. Telephone: +86-755-82911867, Fax : +86-755-82910749 Page 6 of 28 1.7 Test standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators RSS-247 RSS-247 — Digital Transmission Systems (DTSs), Frequency Hop- ping Systems…

Text truncated - open the document above for the full version.

Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 8.520 2407.520 2416.040 0.5 PASS 2437 9.000 2432.520 2441.520 0.5 PASS 2462 8.560 2458.000 2466.560 0.5 PASS 11G Ant1 2412 16.320 2403.880 2420.200 0.5 PASS 2437 16.360 2428.880 2445.240 0.5 PASS 2462 16.360 2453.880 2470.240 0.5 PASS 11N20SISO Ant1 2412 17.560 2403.280 2420.840 0.5 PASS 2437 17.560 2428.280 2445.840 0.5 PASS 2462 17.560 2453.280 2470.840 0.5 PASS Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 14.175 2404.9663 2419.1413 --- --- 2437 14.137 2429.9918 2444.1288 --- --- 2462 14.152 2454.9767 2469.1287 --- --- 11G Ant1 2412 17.273 2403.4473 2420.7203 --- --- 2437 17.128 2428.5090 2445.6370 --- --- 2462 17.285 2453.3709 2470.6559 --- --- 11N20SISO Ant1 2412 18.310 2402.9114 2421.2214 --- --- 2437 18.238 2428.0041 2446.2421 --- --- 2462 18.265 2452.8977 2471.1627 --- --- Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix C: Maximum conducted output power Test Result TestMode Antenna Frequen cy[MHz] Set Power Conducted Powert[dBm] Conducted Limit[dBm] EIRP [dBm] EIRP Limit[dBm] Verdict 11B Ant1 2412 --- 15.95 ≤30.00 17.95 ≤36.00 PASS 2437 --- 16.39 ≤30.00 18.39 ≤36.00 PASS 2462 --- 16.76 ≤30.00 18.76 ≤36.00 PASS 11G Ant1 2412 --- 15.79 ≤30.00 17.79 ≤36.00 PASS 2437 --- 16.28 ≤30.00 18.28 ≤36.00 PASS 2462 --- 16.45 ≤30.00 18.45 ≤36.00 PASS 11N20SIS O Ant1 2412 --- 15.17 ≤30.00 17.17 ≤36.00 PASS 2437 --- 15.66 ≤30.00 17.66 ≤36.00 PASS 2462 --- 16.07 ≤30.00 18.07 ≤36.00 PASS Appendix D: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -13.56 ≤8.00 PASS 2437 -12.52 ≤8.00 PASS 2462 -12.08 ≤8.00 PASS 11G Ant1 2412 -15.09 ≤8.00 PASS 2437 -14.18 ≤8.00 PASS 2462 -15.34 ≤8.00 PASS 11N20SISO Ant1 2412 -16.61 ≤8.00 PASS 2437 -15.07 ≤8.00 PASS 2462 -15.86 ≤8.00 PASS Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix E: Band edge measurements Test Result TestMode Antenn a ChNam e Frequency[MH z] RefLevel[dB m] Result[dB m] Limit[dBm ] Verdic t 11B Ant1 Low 2412 7.57 -41.74 ≤-22.43 PASS High 2462 8.47 -44.61 ≤-21.53 PASS 11G Ant1 Low 2412 4.08 -28.01 ≤-25.92 PASS High 2462 5.72 -38.79 ≤-24.28 PASS 11N20SIS O Ant1 Low 2412 3.88 -28.32 ≤-26.12 PASS High 2462 4.32 -39.31 ≤-25.68 PASS Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 11N20SISO_Ant1_High_2462 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference 7.70 7.70 --- PASS 30~1000 7.70 -57.24 ≤-22.3 PASS 1000~26500 7.70 -43.38 ≤-22.3 PASS 2437 Reference 8.05 8.05 --- PASS 30~1000 8.05 -57.37 ≤-21.95 PASS 1000~26500 8.05 -46.67 ≤-21.95 PASS 2462 Reference 8.25 8.25 --- PASS 30~1000 8.25 -57.25 ≤-21.75 PASS 1000~26500 8.25 -46.53 ≤-21.75 PASS 11G Ant1 2412 Reference 4.54 4.54 --- PASS 30~1000 4.54 -57.27 ≤-25.46 PASS 1000~26500 4.54 -48.69 ≤-25.46 PASS 2437 Reference 5.41 5.41 --- PASS 30~1000 5.41 -41.28 ≤-24.59 PASS 1000~26500 5.41 -49.34 ≤-24.59 PASS 2462 Reference 5.70 5.70 --- PASS 30~1000 5.70 -57.07 ≤-24.3 PASS 1000~26500 5.70 -47.55 ≤-24.3 PASS 11N20SISO Ant1 2412 Reference 4.19 4.19 --- PASS 30~1000 4.19 -35.74 ≤-25.81 PASS 1000~26500 4.19 -49.1 ≤-25.81 PASS 2437 Reference 4.96 4.96 --- PASS 30~1000 4.96 -57.26 ≤-25.04 PASS 1000~26500 4.96 -48.92 ≤-25.04 PASS 2462 Reference 5.23 5.23 --- PASS 30~1000 5.23 -57.18 ≤-24.77 PASS 1000~26500 5.23 -48.76 ≤-24.77 PASS Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000

11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference 11B_Ant1_2462_30~1000 11B_Ant1_2462_1000~26500 11G_Ant1_2412_0~Reference 11G_Ant1_2412_30~1000 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_30~1000 11N20SISO_Ant1_2412_1000~26500 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_30~1000 11N20SISO_Ant1_2437_1000~26500 11N20SISO_Ant1_2462_0~Reference 11N20SISO_Ant1_2462_30~1000 11N20SISO_Ant1_2462_1000~26500 Appendix G: Duty Cycle Test Result TestMode Antenna Frequency[MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] Factor 11B Ant1 2412 1.00 1.00 100.00 0.00 2437 12.42 12.54 99.04 0.04 2462 12.41 12.55 98.88 0.05 11G Ant1 2412 2.07 2.20 94.09 0.26 2437 2.07 2.20 94.09 0.26 2462 2.07 2.19 94.52 0.24 11N20SISO Ant1 2412 1.92 2.05 93.66 0.28 2437 1.92 2.05 93.66 0.28 2462 1.92 2.05 93.66 0.28 Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 Appendix H: Emissions in Restricted Bands Mode: 11B-2412 PK Final Data List NO. Freq. [MHz] Factor [dB/m] PK Value [dBμV/m] PK Limit [dBμV/m] PK Margin [dB] Height [cm] Angle [°] Polarity 1 2310 7.46 45.43 74.00 28.57 150 171 Horizontal 2 2332.50 25 7.45 48.77 74.00 25.23 150 216 Horizontal 3 2366.53 65 7.46 50.82 74.00 23.18 150 1 Horizontal 4 2374.14 41 7.45 49.70 74.00 24.30 150 210 Horizontal 5 2385.75 58 7.46…

Text truncated - open the document above for the full version.