2AA23-QIMP0BQimini Pocket

User Manual. Wireless Charging Station for Qi-enabled devices. Safety Instructions We do not assume liability for resulting damages to property or personal injury if the product has been abused in any way or damaged by improper use or failure to observe these operating instructions. The warranty/guarantee will then expire. • The product is not a toy and should be kept out of reach of children. • Using an USB port on a notebook or other device might result in a less satisfying user experience. • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive materials. • Do not tamper with the unit’s internal compo- nents. This invalidates the warranty. • If there is reason to believe that safe operation is no longer possible, the device is to be put out of operation and secured against unintended operation. Safe operation is no longer possible if the device: - no longer works - shows visible damages - was stored under unfavourable conditions for a long period of time - was subject to considerable transport stress • When disposing of this product, ensure it is collected separately for special treatment and not as normal household waste. • Repair works must only be carried out by a specialist / workshop. • Images shown in this manual may differ from the actual display. • The contents of this manual may not be reproduced without the permission of the manufacturer. EN Content This pack contains one Qimini™ Pocket. 1. Plug the male USB of the Qimini™ into a 5V AC/DC adaptor or into any computer’s USB port. For optimal performance, we recommend to use a 5V USB port able to provide up to 2A. 2. Place any Qi-enabled device on the Qimini™. You are ready to charge your device. Instructions Trademark Qimini™ is a trademark of Tektos Ltd registered in Hong Kong and other countries. Disposal Disposal of waste electrical and electronic equipment. In order to preserve, protect and improve the quality of the environment, protect human health and utilise natural resources prudently and rationally, the user should return unserviceable product to relevant facilities in accordance with statutory regulations. The crossed-out wheeled bin indicates the product needs to be disposed separately and not as municipal waste. EU Declaration of Conformity FCC Compliance Statement Hereby, Tektos Limited, declares that the provided Wireless Charger Station (Model: QIMP0B is in conformity with the requirements of Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request. Changes or modifications not expressly appro- ved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfe- rence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equip- ment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harm- ful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmit- ter must not be co-located or operating in conjunction with any other antenna or transmitter. Warning Maintenance To reduce the risk of interference with other electrical equipment: - Consult your doctor or device manufacturer if you have a pacemaker or other implanted electrical device. - Do not place your phone on the charger and plug it into the USB port simultaneously. When a product interferes with Qimini Pocket, please disconnect the USB plug. No software update needed. myqimini.com

W TEKTOS Block Diagrams Extemal Photos Intemal Photos Operational Description/Theory of Operation Tune-Up Procedure Schematics Test Setr,rp Photos User's Manual FREDERIC VAUTARD (Print name) Request for Confidentialifv Date: 1s11112013 Subject: Confidentiality Request for: FCC ID:2AA23-QIMPOB Pursuant to FCC 47 CRF 0.451(d) and 0.459 and IC RSP-I00, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit I Short Term E Short term I Short Term ! Short term I Short Term f, Short Term I Short term I Short Term ffi Permanent f Permanent*r [] Permanent I Permanent fi Permanent I Permanent* *Note: (lnsert Explanation as Necessary) TEKTOS LIMITED has spent substantial effort in developing this product and it is one of the first of its ki4d ,, ,rdrttryJlr"tng the subject iniormation easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as perrnanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the publio. Short-Term Confidentiality: The applicant requests the exhibits selected above as sho( term confidential be withheld from public view for a period of (specify ,umber qf days nqtJo.e;ce-ei"t;0-)2' "-';; f;"m the date of the Grant of Equipment } Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketin or release of the product to the public. Applicant is also aware that they are responsible to notify PHOENIX in the event information regarding the product or the product is made available to the public. PHOENIX will then releas the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-i 705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term anci Pemanent Confidentiality, either type of marked exhibit above will simply be n-rarked Confidential when submitted to IC. Sincerely, By: (Signature/Title www.tektosworld.com

Date: 15/1112013 To Whom It May Concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Hellen Wang in SGS-CSTC Standards Technical Services Cc LtdJSGSI Shenzhen Branch to act on our behalf in all matters relating to all processes @alandanycommunicationneededwiththenationalauthorityt,shall have the same legal authority as acts on our own behalf. We certify that we are not subject to denial of federal Section 5301 of the Anti-Drug Abuse Act of 1988, 21 CFR 1 .2002 (b), to the application is subject to denial Thank you, Agency Agreement Expiration Date: 12 months By: Title: (Signature) R&D Manager On behalf of: TEKTOS LIMITED (Company Name) Teleohone: +8523421 022 ,r.-N }TEKTO Authority to Act as Agent benefits, that includes FCC benefits, pursuant U.S.C. 862. Further, no PafrY, as defined in 4 of federal benefits, that includes FCC benefits. FREDERIC VAUTARD (Print name)

1.1 EUT Constructional Details Test Model No.: QIMP0B This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

Center SS_QIMP0A_FCC_V1 Dennis Wang 2013-10-07

1.1 EUT Constructional Details Test Model No.: QIMP0B This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle Section, Science & Technology Park, District Shenzhen, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM130900523002 Page: 1 of 14 Authorized Signature: Starry Li EMC Laboratory Project Engineer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Human Exposure Report Application No.: SZEM1309005230RF Applicant/Manufacturer: Tektos Limited Address of Applicant/ Manufacturer: Room F, 20/F, Kwong Ga factory Building, 64 Victoria Road, Kennedy Town, Hong Kong Factory: 1, Shenzhen Allcomm Electronic Company Limited 2, Shenzhen Dapter Electronic Science Co., Ltd Address of Factory: 1, Tang Xia Yong Village, Song Gang Town, Baoan District, Shenzhen, Guang Dong, P.R.C. 2, 4th Floor, Building C, LongDa Industrial Area, LiaoKeng village, Shiyan Town, Baoan District, Shenzhen, China Equipment Under Test (EUT): EUT Name: Qimini pocket Model No.: QIMP0B Standards: 47 CFR PART 1, Subpart I, Section 1.1310 Date of Receipt: 2013-09-17 Date of Test: 2013-10-16 to 2013-12-04 Date of Issue: 2013-12-05 Test Result : PASS* * This report is just a test result base on the test method and limit requirement shown in the form on the second page. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government.. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130900523002 Page: 2 of 14 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 2 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 CONTENTS ......................................................................................................................................... 2 3 GENERAL INFORMATION .................................................................................................................. 3 3.1 DETAILS OF E.U.T. ............................................................................................................................. 3 3.2 DESCRIPTION OF SUPPORT UNITS ........................................................................................................ 3 3.3 TEST LOCATION ................................................................................................................................. 3 3.4 TEST FACILITY.................................................................................................................................... 4 3.5 DEVIATION FROM STANDARDS .............................................................................................................. 4 3.6 ABNORMALITIES FROM STANDARD CONDITIONS...................................................................................... 4 4 EQUIPMENTS USED DURING TEST .................................................................................................. 4 5 TEST RESULTS .................................................................................................................................. 5 5.1 RF EXPOSURE TEST ........................................................................................................................... 5 5.1.1 E.U.T. Operation ...................................................................................................................... 5 Operating Environment: ........................................................................................................................ 5 EUT Operation: ...…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle Section, Science & Technology Park, Nanshan District Shenzhen, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM130900523001 Page: 1 of 15 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only FCC Test Report Application No.: SZEM1309005230RF Applicant/Manufacturer: Tektos Limited Factory: 1, Shenzhen Allcomm Electronic Company Limited 2, Shenzhen Dapter Electronic Science Co., Ltd Equipment Under Test (EUT): EUT Name: Qimini pocket Model No.: QIMP0B FCC ID: 2AA23-QIMP0B Standards: 47 CFR PART 18: 2012 Date of Receipt: 2013-09-17 Date of Test: 2013-10-16 to 2013-12-04 Date of Issue: 2013-12-05 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130900523001 Page: 2 of 15 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 2 Test Summary Test Test Requirement Test Method Class / Severity Result Conducted Emission (150 kHz to 30 MHz) 47 CFR PART 18: 2012 FCC OST/ MP-5:1986 18.307(a) PASS Radiated Emission (9 kHz to 1GHz) 47 CFR PART 18: 2012 FCC OST/ MP-5:1986 18.305(b) Pass SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM130900523001 Page: 3 of 15 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 TEST SUMMARY ........…

Text truncated - open the document above for the full version.

1 Photographs Test Model No.: QIMP0B 1.1 Conducted Emission Test Setup 1.2 Radiated Emission Test Setup