2AA69001Neuron 2

Copyright ©2013 Capsule Technologie. DC-NU2-IM-DOC 0.8 October 30, 2013 Capsule Neuron 2 Hardware Installation and Maintenance Guide DRAFT what it takes to connect. Contents 2 English Legal Notice Copyright © 2013 Capsule Technologie. All rights reserved. This product and related documentation are protected by copyright and distributed under licensing restricting their use, copying, distribution, and decompilation. No part of this product or related documentation may be reproduced in any form or by any means without prior written authorization of Capsule Technologie. While every precaution has been taken in the preparation of this documentation, the document is provided "as is" and Capsule Technologie assumes no responsibility for any typographical, technical, or other inaccuracies in this document. Capsule Technologie reserves the right to change, modify, transfer, or otherwise revise this publication without notice. Trademarks The DataCaptor and Capsule Neuron families of related marks, images, and symbols are the exclusive properties of Capsule Technologie. Corepoint Integration Engine TM is a trademark of Corepoint Health. DISPATCH® is a registered trademark of Caltech Industries, Inc. Clorox® is a registered trademark and Clorox Healthcare™ is a trademark of the Clorox Company. Sani-Cloth® is a registered trademark of PDI, Inc. 3 English Contents Chapter 1: Introducing the Capsule Neuron 25 Overview5 Intended Use5 About this document6 Product6 Purpose6 Audience6 Notes, cautions, warnings6 Related documents7 Manufacturer’s information7 Getting additional information8 Table of abbreviations8 Chapter 2: Setting up the Capsule Neuron9 What’s in this chapter9 Unpacking and inspecting the package contents9 Contents of a product shipment9 Unpacking the cartons10 Hardware installation prerequisites10 Installing the batteries in the Capsule Neuron11 Installing the main battery in the Capsule Neuron11 Installing the optional extended battery in the Capsule Neuron11 Deploying the Capsule Neuron13 Precautions for all deployments13 Considerations for wall-mounted deployments13 Mounting the Capsule Neuron on the wall13 Mounting the Capsule Neuron on a roll stand14 Connecting the Capsule Neuron to the power supply14 Power requirements14 Connecting the Capsule Neuron to the power supply15 Before you use the Capsule Neuron for the first time15 Chapter 3: Operating the Capsule Neuron16 Components on the Capsule Neuron16 Connectivity18 Serial Ports 19 USB Ports 19 Ethernet Port19 Powering on the Capsule Neuron19 Power on the Capsule Neuron19 Power Off the Capsule Neuron20 Working with the Capsule Neuron touch screen20 Reading the status LED20 Working with the batteries21 Battery Lifetime Terminology21 Battery Summary21 4 English Charging the batteries22 Removing a battery22 Swapping a battery22 Connecting the Capsule Neuron to the network23 Connecting a vital signs monitor to the Capsule Neuron23 Before you connect23 Connecting the cables24 Connecting the devices24 For more on using the Capsule Neuron with the vital signs monitor24 Chapter 4: Maintaining the Capsule Neuron25 Periodic cleaning and disinfection25 Cleaning Precautions 25 Periodic maintenance of the Capsule Neuron26 Authorized Access26 Inspections26 Storing the Capsule Neuron26 Maintenance of the Capsule Neuron batteries26 Cleaning26 Short-term maintenance26 Long-term storage and maintenance27 Chapter 5: Technical Information29 Guidance and manufacturer’s declaration29 Capsule Neuron technical specifications33 Device Identification Module (DIM) technical specifications34 Regulatory Information35 Explanation of Device and Packaging Symbols35 Safety and Regulatory Compliance37 EN/IEC37 Federal Communications Commission37 Declaration CE38 RoHS and WEEE Compliance38 Recycling and the Environment38 Installation and Maintenance Guide [Chapter 1] 1 5 English Introducing the Capsule Neuron 2 Overview The Capsule Neuron 2 is Capsule's point-of-care hardware platform for device connectivity. It is a flexible and scalable platform that you can configure to operate in various care areas of the hospital. In high acuity environments, such as the ICU, the Capsule Neuron 2 typically runs Capsule’s Status Application to enable continuous collection of vital signs for one patient from multiple devices. In low acuity, non-critical care settings (such as med-surg), the Capsule Neuron 2 typically runs Capsule's Mobile Vitals Plus Application to enable the automatic collection, validation, and transmission of vital signs from multiple patients to the EMR directly from the point of care. Note:Do not operate the Capsule Neuron 2 until after you read and understand these instructions. Pay particular attention to all warnings and cautions. Note:For information about the administration of DataCaptor software, IT personnel should refer to the DataCaptor System Administrator’s Guide. Note:To operate the Capsule Neuron 2, clinicians require training in the procedures described in the Capsule Neuron Status Application Clinical User’s Guide and the Capsule Neuron Mobile Vitals Plus Application Clinical User’s Guide. Note:To operate any medical device that connects to the Capsule Neuron, clinicians must be separately trained in the use of that device. Intended Use The intended use of the DataCaptor™ system is for data collection and clinical information management, either directly or through networks with independent bedside devices. Capsule's hardware and software are not intended for monitoring purposes, nor is the software intended to control any of the clinical devices (independent bedside devices/information systems) to which it is connected. There is no other known contraindication for the use of the Capsule Neuron 2 system. Caution:Do not modify the Capsule Neuron 2, cables, or any part of the DataCaptor Connectivity software, or mount the device in any way other than instructed in Capsule documents. Any modification to the hardware or software can prevent proper …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

FCC LABEL LOCATION FCC ID:2AA69001 FCC LABEL FCC Statement

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30

FCC ID: 2AA69001 Report No.: RF130923D14/-1/-2/-3 Operational Description This device is an IPC with built-in a WLAN IEEE802.11a/b/g/n module and RFID module. For WLAN IEEE802.11a/b/g/n card: The device is including a WLAN module. The WLAN module is power by host equipment (IPC). The type of the antenna is PCB antenna. Under normal use condition, the user has to keep at least 20cm separation distance between radiator and the body of the user. The WLAN card is operates in both of the 5GHz (OFDM technique) and 2.4GHz (DSSS and OFDM technique) bands. The EUT operates in the 2.4GHz frequency spectrum with throughput of up to 300Mbps. The EUT incorporates a MIMO function. Physically, the card provides two completed transmitters and two receivers. For the 802.11n, the EUT is 2 * 2 spatial MIMO (2Tx & 2Rx) without beam forming function. When the EUT operating in 802.11b, 802.11g, 802.11a, the software operation, which is defined by manufacturer, only set single Tx. The EUT complies with draft 802.11n standards and backwards compatible with 802.11b, 802.11g, 802.11a products. FCC 15.407(c) states: The device shall automatically discontinue transmission in case of either absence of information to transmit or operational failure. These provisions are not intended to preclude the transmission of control or signaling information or the use of repetitive codes used by certain digital technologies to complete frame or burst intervals. Applicants shall include in their application for equipment authorization a description of hoe this requirement is met. Data transmission is always initiated by software, which is then pass down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets (ACKs, CTS, PSPoll, etc...) are initiated by the MAC. There are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets are being transmitted. FCC ID: 2AA69001 Report No.: RF130923D14/-1/-2/-3 For RFID Module: The transmitter of the EUT (IPC) is powered by 3.3Vdc from host equipment. The type of antenna is PCB antenna. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference.

Report No.: SA130923D14 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA130923D14 MODEL NO.: DC-NU2-UMPC FCC ID: 2AA69001 RECEIVED: Sep. 23, 2013 TESTED: Sep. 24 ~ Oct. 24, 2013 ISSUED: Oct. 25, 2013 APPLICANT: Capsule Technologie SAS ADDRESS: 9 villa Pierre Ginier 75018 Paris, France ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA130923D14 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION ........................................................................................... 4 2. RF EXPOSURE LIMIT .................................................................................. 5 3. MPE CALCULATION FORMULA .................................................................. 5 4. CLASSIFICATION ......................................................................................... 5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ............... 6 Report No.: SA130923D14 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA130923D14 Original release Oct. 25, 2013 Report No.: SA130923D14 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Neuron 2 BRAND NAME: Capsule MODEL NO.: DC-NU2-UMPC APPLICANT: Capsule Technologie SAS TESTED: Sep. 24 ~ Oct. 24, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Oct. 25, 2013 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Oct. 25, 2013 ( Rex Lai / Assistant Manager ) Report No.: SA130923D14 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA130923D14 6 of 6 Report Format Version 5.0.0 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412 ~ 2462 21.47 2 20 0.0442 1.00 5180 ~ 5240 15.86 2 20 0.0122 1.00 2460 ~ 5320 15.78 2 20 0.0119 1.00 5500 ~ 5700 15.53 2 20 0.0113 1.00 5745 ~ 5825 21.01 2 20 0.0398 1.00 --- END ---

Report No.: RF130923D14-3 1 of 23 Report Format Version 5.0.0 DFS TEST REPORT REPORT NO.: RF130923D14-3 MODEL NO.: DC-NU2-UMPC FCC ID: 2AA69001 RECEIVED: Sep. 23, 2013 TESTED: Oct. 22, 2013 ISSUED: Oct. 25, 2013 APPLICANT: Capsule Technologie SAS ADDRESS: 9 villa Pierre Ginier 75018 Paris, France ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF130923D14-3 2 of 23 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................ 3 1 CERTIFICATION ...................................................................................... 4 2 EUT INFORMATION ................................................................................ 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ..................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ....................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT .................... 5 2.4 EUT MAXIMUM AND MINIMUM CONDUCTED POWER ........................ 6 2.5 EUT MAXIMUM AND MINIMUM E.I.R.P. POWER ................................... 7 2.6 TRANSMIT POWER CONTROL (TPC) ................................................... 8 2.7 STATEMENT OF MAUNFACTURER ....................................................... 8 3 U-NII DFS RULE REQUIREMENTS ........................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ............................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ............................ 10 4 TEST & SUPPORT EQUIPMENT LIST ................................................. 12 4.1 TEST INSTRUMENTS ........................................................................... 12 4.2 DESCRIPTION OF SUPPORT UNITS .................................................. 12 5 TEST PROCEDURE .............................................................................. 13 5.1 ADT DFS MEASUREMENT SYSTEM: .................................................. 13 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL: ............... 14 5.3 DEVIATION FROM TEST STANDARD .................................................. 14 5.4 RADIATED TEST SETUP CONFIGURATION ....................................... 15 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE .................................. 15 6 TEST RESULTS .................................................................................... 16 6.1 SUMMARY OF TEST RESULTS ........................................................... 16 6.2 TEST RESULTS .................................................................................... 17 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE. .............................................................................. 17 6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME . 18 6.2.3 NON- OCCUPANCY PERIOD ............................................................... 20 6.2.4 NON-ASSOCIATED TEST ..................................................................... 22 6.2.5 NON- CO-CHANNEL TEST ................................................................... 22 7 INFORMATION ON THE TESTING LABORATORIES ........................... 23 Report No.: RF130923D14-3 3 of 23 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF130923D14-3 Original release Oct. 25, 2013 Report No.: RF130923D14-3 4 of 23 Report Format Version 5.0.0 1 CERTIFICATION PRODUCT: Neuron 2 MODEL: DC-NU2-UMPC BRAND: Capsule APPLICANT: Capsule Technologie SAS TEST SAMPLE: ENGINEERING SAMPLE TESTED: Oct. 22, 2013 STANDARDS: FCC Part 15, Subpart E (Section 15.407) FCC 06-96 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE:Oct. 25, 2013 ( Annie Chang / Supervisor ) APPROVED BY : , DATE:Oct. 25, 2013 ( Rex Lai / Assistant Manager ) Report No.: RF130923D14-3 5 of 23 Report Format Version 5.0.0 2 EUT INFORMATION 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT TABLE 1: OPERATING FREQUENCY BANDS AND MODE OF EUT OPERATIONAL MODE…

Text truncated - open the document above for the full version.

Report No.: RF130923D14 1 of 79 Report Format Version 5.2.0 FCC TEST REPORT (WLAN 15.247) REPORT NO.: RF130923D14 MODEL NO.: DC-NU2-UMPC FCC ID: 2AA69001 RECEIVED: Sep. 23, 2013 TESTED: Sep. 24 ~ Oct. 24, 2013 ISSUED: Oct. 25, 2013 APPLICANT: Capsule Technologie SAS ADDRESS: 9 villa Pierre Ginier 75018 Paris, France ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF130923D14 2 of 79 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................. 4 1. CERTIFICATION .......................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ............................................................................... 6 3. GENERAL INFORMATION .......................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................ 7 3.2 DESCRIPTION OF TEST MODES .............................................................................. 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................ 10 3.3 DUTY CYCLE OF TEST SIGNAL .............................................................................. 13 3.4 DESCRIPTION OF SUPPORT UNITS ...................................................................... 15 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ....................................................... 15 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................... 16 4. TEST TYPES AND RESULTS ................................................................................... 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................... 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 17 4.1.2 TEST INSTRUMENTS ............................................................................................... 18 4.1.3 TEST PROCEDURES ............................................................................................... 19 4.1.4 DEVIATION FROM TEST STANDARD...................................................................... 19 4.1.5 TEST SETUP ............................................................................................................. 20 4.1.6 EUT OPERATING CONDITIONS .............................................................................. 20 4.1.7 TEST RESULTS ........................................................................................................ 21 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................ 43 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT .......................................... 43 4.2.2 TEST INSTRUMENTS ............................................................................................... 43 4.2.3 TEST PROCEDURES ............................................................................................... 44 4.2.4 DEVIATION FROM TEST STANDARD...................................................................... 44 4.2.5 TEST SETUP ............................................................................................................. 44 4.2.6 EUT OPERATING CONDITIONS .............................................................................. 44 4.2.7 TEST RESULTS ........................................................................................................ 45 4.3 6dB BANDWIDTH MEASUREMENT ......................................................................... 49 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ...................................................... 49 4.3.2 TEST SETUP ............................................................................................................. 49 4.3.3 TEST INSTRUMENTS ............................................................................................... 49 4.3.4 TEST PROCEDURE .................................................................................................. 49 4.3.5 DEVIATION FROM TEST STANDARD...................................................................... 49 Report No.: RF130923D14 3 of 79 Report Format Version 5.2.0 4.3.6 EUT OPERATING CONDITIONS ............................…

Text truncated - open the document above for the full version.

Report No.: RF130923D14-1 1 of 70 Report Format Version 5.2.0 FCC TEST REPORT (WLAN 15.407) REPORT NO.: RF130923D14-1 MODEL NO.: DC-NU2-UMPC FCC ID: 2AA69001 RECEIVED: Sep. 23, 2013 TESTED: Sep. 24 ~ Oct. 24, 2013 ISSUED: Oct. 25, 2013 APPLICANT: Capsule Technologie SAS ADDRESS: 9 villa Pierre Ginier 75018 Paris, France ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF130923D14-1 2 of 70 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................. 4 1. CERTIFICATION ............................................................................................... 5 2. SUMMARY OF TEST RESULTS ....................................................................... 6 2.1 MEASUREMENT UNCERTAINTY .................................................................... 6 3. GENERAL INFORMATION ............................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................. 10 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................... 12 3.4 DESCRIPTION OF SUPPORT UNITS ............................................................ 15 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 15 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 15 4. TEST TYPES AND RESULTS ......................................................................... 17 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 17 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....... 17 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ... 17 4.1.3 TEST INSTRUMENTS .................................................................................... 18 4.1.4 TEST PROCEDURES ..................................................................................... 19 4.1.5 DEVIATION FROM TEST STANDARD ........................................................... 19 4.1.6 TEST SETUP .................................................................................................. 20 4.1.7 EUT OPERATING CONDITION ...................................................................... 20 4.1.8 TEST RESULTS .............................................................................................. 21 4.2 CONDUCTED EMISSION MEASUREMENT .................................................. 49 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................... 49 4.2.2 TEST INSTRUMENTS .................................................................................... 49 4.2.3 TEST PROCEDURES ..................................................................................... 50 4.2.4 DEVIATION FROM TEST STANDARD ..........................................…

Text truncated - open the document above for the full version.