2AA7B-PPACKRPS-600 Powerpack

Manual for RPS-600 Manufacturer: Ink Machines Sweden AB BOX 8025 350 08 VÄXJ Ö, Sweden Content Ink Machines RPS-600 Draft 0.10/2014‐01‐27 1 (26) Content Content .................................................................................................................................... 1 Document history ....................................................................................................................... 2 Introduction ............................................................................................................................ 3 Intended use ............................................................................................................................... 3 Document information ............................................................................................................... 3 Description .............................................................................................................................. 4 Main unit / charger .................................................................................................................... 5 User interface – Control panel and Display ................................................................................ 5 Powerpack .................................................................................................................................. 5 Foot switch ................................................................................................................................. 5 Power adapter ............................................................................................................................ 5 USB cable .................................................................................................................................... 5 Approvals ................................................................................................................................ 6 Identification labels .................................................................................................................... 6 Safety ....................................................................................................................................... 7 Regulations ................................................................................................................................. 7 Product ....................................................................................................................................... 7 Customer .................................................................................................................................... 7 Electromagnetic compatibility ................................................................................................... 8 Instruction ............................................................................................................................... 9 Delivery ....................................................................................................................................... 9 Unpacking ................................................................................................................................... 9 Getting started ......................................................................................................................... 10 Connection ............................................................................................................................ 13 Wires ........................................................................................................................................ 13 User interface ....................................................................................................................... 14 Settings ..................................................................................................................................... 15 Pairing ....................................................................................................................................... 16 Active Powerpack ..................................................................................................................... 16 Sleep mode ............................................................................................................................... 16 Kick Start ................................................................................................................................... 16 Boost mode .............................................................................................................................. 17 Speed(CPS) ............................................................................................................................... 17 Duty cycle ................................................................................................................................. 17 Technical specification ........................................................................................................ 18 Main unit, RPS-600 © ............................................................................................................... 18 Powerpack © ............................................................................................................................ 18 Foot switch WFS © ................................................................................................................... 19 Power adapter, ATS065‐A240 .................................................................................................. 19 Warranty ................................................................................................................................ 20 Cleaning ................................................................................................................................ 21 Preparation ................................................................…

Text truncated - open the document above for the full version.

PCB Powerpack

SP Technical Research Institute of Sweden Postal address Office location Phone / Fax / E-mail Laboratories are accredited by the Swedish Board for Accreditation and Conformity Assessment (SWEDAC) under the terms of Swedish legislation. This report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory. SP Box 857 SE-501 15 Borås SWEDEN Västeråsen Brinellgatan 4 SE-504 62 Borås SWEDEN +46 10 516 50 00 +46 33 13 55 02 [email protected] REPORT issued by an FCC listed Laboratory Reg. no. 93866. The test site complies with RSS-Gen, file no: IC 3482A-2 Date Reference Page 2013-10-15 3P07356-F15C 1 (2) Contact person Fredrik Isaksson Electronics +46 10 516 55 80 [email protected] Specialmekaniska i Växjö AB Christian Johansson Bävervägen 9 352 45 VÄXJÖ Equipment Authorization measurements on 2440 MHz Transceiver Unit (10 appendices) Test objects Ink machine RPS-600, consisting of three different transmitters. EUT 1: Base unit Product name: RPS-600 Serial number: 01-0114 The EUT was powered by an AC/DC-adapter during the test, Nordic Power, Model: ATS065, out 24 VDC/2.7 A The AC/DC-adapter was powered by 120 V AC/60 Hz. EUT 2: Power pack attached on an ink machine Dragonfly tattoo machine Serial number: 03-0114 EUT 3: Foot pedal Product name: WFS Serial number: 02-0114 Summary See Appendix 1 for general information and Appendix 10 for photos. Emission measurements as specified below have been performed. Standard Compliant Appendix Remarks FCC 47 CFR Part 15 C 15.249 Operation within the band 2400-2483.5 MHz Yes IC RSS-210 Issue 8, December 2010 Yes Duty cycle measurements N/A 2 15.249 (a) / RSS-210 A2.9(a) Field strength of fundamental Yes 3 15.249 (d) (e) / RSS-210 A2.9(b) Radiated emission Yes 4 15.215 (c) 20 dB bandwidth Yes 5 15.207 / RSS-Gen 7.2.4 Conducted emission limits Yes 6 2.1049 / RSS-Gen 4.6.1 Occupied bandwidth Yes 7 2.1049 / RSS-210 A2.9(b) Band Edge Yes 8 RF Safety / RSS-102 2.5.1 SAR Evaluation Yes 9 Note: Above RSS items are given as cross-reference only. Measurements were performed according to ANSI procedures referenced by FCC and covered by SP’s accreditation. 1002 ISO/IEC 17025 Date Reference Page REPORT 2013-10-15 3P07356-F15C 1 (3) Appendix 1 SP Technical Research Institute of Sweden Performance test and requirements The tests were performed to verify that RPS-600 meets the electromagnetic compatibility requirements of FCC 47 CFR part 15 C. Test facility The used anechoic chamber is compliant with the requirements of section 2.948 of the FCC rules and listed, registration number 96866, as a facility accepted for certification under parts 15 and 18. The site complies with RSS Gen, Issue 2 and is accepted by Industry Canada for the performance of radiated measurements, IC-file number 3482A-2. Test objects Transceiver 1: Base unit Transceiver 2: Power pack Transceiver 3: Foot pedal Antenna: Integral, PCB Antenna gain, average, typical: 0.6 dBi Antenna gain, peak, typical: 1.3 dBi Frequency: 2440 MHz Frequency used during test: 2440 MHz Modulation: O-QPSK Data rate: 250 kbit/s Supply voltage, Transceiver 1: 24 V DC via external AC/DC-adapter Supply voltage, Transceiver 2: 7.4 V DC, internal batteries 2xLihium Polymer, 3.7 VDC/820 mAh Supply voltage, Transceiver 3: 3.0 V DC, internal battery Coin cell CR2450, Lithium Manganese Dioxide Measurement equipment Measurement equipment Calibration Due SP number Test site Edison 2013-12 504 114 EMI test receiver R&S ESI 26 2014-07 503 292 EMI test receiver R&S ESU 26 2014-08 902 210 LISN Schwarzbeck NNLA 8120 2015-02 504 129 Antenna Schaffner CBL 6143 2016-09 504 079 Horn antenna EMCO 3115 2016-03 902 212 Standard gain horn Flann 16240-25 - 503 939 Standard gain horn Flann 18240-25 - 503 900 Standard gain horn Flann 20240-20 - 503 674 Low Noise Amplifier Miteq 2014-09 503 285 Low Noise Amplifier Miteq 2014-10 504 160 High pass filter Wainwright WHKY 2014-07 504 200 AC Power Source HP 6813B 2013-10 503 091 Multimeter Fluke 83 2014-08 501 522 Temperature and humidity meter Testo 625 2014-06 504 117 Date Reference Page REPORT 2013-10-15 3P07356-F15C 2 (3) Appendix 1 SP Technical Research Institute of Sweden Operational test mode Justification measurements for the Ink machine were performed with rotation of the EUT through three orthogonal axis to determine in which orientation the radio module had the highest emission levels, see photos in Appendix 11. The test was performed with continuous transmission (100% duty cycle), if not otherwise stated, and with normal modulation. For normal duty cycle measurements see appendix 2. EUT 1: In normal mode the duty cycle was varied between 0.07-0.4 % EUT 2: In normal mode the duty cycle was varied between 0.3-2.4 % EUT 3: No continuous duty cycle, the transmitter was activated by the foot pedal, one transmission, Tx on=1.06 ms Cabling during emission test: Base unit RPS-600: EUT port Cable type Termination / use DC port 2 wire unshielded 1.5 m, bundled to 1.0 m Connected to the AC/DC-adapter (Cable length of the AC cable of the adapter was 1.75 m) 2x phono 2 wire shielded 2.0 m, (bundled to 0.5 m) Unterminated USB No cable connected. Not used during normal operation, just for service. N/A Uncertainties Measurement and test instrument uncertainties are described in the quality assurance documentation ”SP QD 10885”. The measurement uncertainties can be found in the table below. The uncertainties are calculated with a coverage factor k=2 (95% level of confidence). The measurement uncertainties can be found in the table below: Method Uncertainty Radiated emission, 30 – 1000 MHz 4.8/5.6 dB (V/H-pol) Radiated emission, 1 – 40 GHz 2.6 dB Conducted emission 3.5 dB Compliancy evaluation is based on a shared risk principle with respect to the measurement uncertainty. Date Reference Page REPORT 2013-10-15 3P07356-F15C 3 (3) Appendix 1 SP Technical Research Institute of Sweden Reservation The test results in this report apply only to the particular test object a…

Text truncated - open the document above for the full version.

Date Reference Page REPORT 2013-10-15 3P07356-F15C 1 (14) Appendix 10 SP Technical Research Institute of Sweden Photos The test set-up during all the radiated tests can be seen in the pictures below. EUT 1, 30-1000 MHz: Date Reference Page REPORT 2013-10-15 3P07356-F15C 2 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 2, 30-1000 MHz, X-axis: X-axis: Date Reference Page REPORT 2013-10-15 3P07356-F15C 3 (14) Appendix 10 SP Technical Research Institute of Sweden Y-axis: Z-axis: Date Reference Page REPORT 2013-10-15 3P07356-F15C 4 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 3, 30-1000 MHz: Date Reference Page REPORT 2013-10-15 3P07356-F15C 5 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 1, 1-8 GHz: Date Reference Page REPORT 2013-10-15 3P07356-F15C 6 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 2, 1-12 GHz, X-axis: Date Reference Page REPORT 2013-10-15 3P07356-F15C 7 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 3, 1-12 GHz: EUT 1, 8-12 GHz: Date Reference Page REPORT 2013-10-15 3P07356-F15C 8 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 1+2+3, 12-18 GHz: Date Reference Page REPORT 2013-10-15 3P07356-F15C 9 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 1+2+3, 18-25 GHz: Date Reference Page REPORT 2013-10-15 3P07356-F15C 10 (14) Appendix 10 SP Technical Research Institute of Sweden EUT 1 test set-up during the conducted AC emissions tests can be seen in the pictures below: