2AA9IBTHBluetooth Speaker

Model differences We: ANYSONIC ELECTRONICS CO., LIMITED Statement that All the names（Booster BTH, AR5409B, AR5509B） are the same circuit and RF module, except the model names and colors. City and Country: Date: Name: (this must be a person) Function : Signature: (or official company stamp) Dongguuan 2014.8.31 Jim ho Manager

ANYSONIC ELECTRONICS CO., LIMITED FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name ANYSONIC ELECTRONICS CO., LIMITED Addresss No.72,xin’an Rd,Ludong Dist,Humen Town City Dongguuan City,Guangdong Country China declare that the following representative (agent): Name (person) Jim.he Company name Shenzhen STONE Testing Technology Co.,Ltd. Addresss F/6, Bldg.12, Zhongxing Industrial City, Chuangye Rd., Nanshan District City Shenzhen Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description BLUETOOTH SPEAKER Type or Model(s) Booster BTH, AR5409B, AR5509B Tradename or Brand(s) N/A We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process this application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Dongguuan 2014.8.31 Jim ho Manager

ANYSONIC ELECTRONICS CO., LIMITED FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name ANYSONIC ELECTRONICS CO., LIMITED Addresss No.72,xin’an Rd,Ludong Dist,Humen Town City Dongguuan City,Guangdong Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: 2AA9I - BTH of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) x Operational Description x Block Diagrams x Schematics Diagrams Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Dongguuan 2014.8.31 Jim ho Manager

APPENDIX-PHOTOGRAPHSOF EUT CONSTRUCTIONALDETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.

Photo 9 Photo10 Photo11 Photo12 Photo13 Photo14 Photo15 Photo16 Photo17 Photo18 Photo19 Photo20 Photo21 Photo22

FCC ID: 2AA9IBTH RF EXPOSURE EVALUATION METHOD SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Maximum measured transmitter power BT4.0 Frequency (MHZ) Max Antenna Gain (dBm) EIRP (dBm) EIRP (mW) 2402 0 -1.34 0.73 2441 0 -1.36 0.73 2480 0 -1.38 0.73 Refer to 447498 25 D01 General RF Exposure Guidance v05 Appendix A, you see that for Maximum Conducted AV Output Power 0.73 mW(<10mW), so no SAR is required.

FCC RADIO TEST REPORT FCC ID: 2AA9IBTH Product： BLUETOOTH SPEAKER Trade Name： N/A Model Name： Booster BTH Serial Model： AR5409B, AR5509B Prepared for ANYSONIC ELECTRONICS CO．，LIMITED No.72,xin’an Rd,Ludong Dist,Humen Town,Dongguuan City,Guangdong,China Prepared by Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: (86)- 0755-23590251 Fax: (86)-0755- 23590255 Http: www.att-lab.net Page 2 of 45 Report No.: ATT-20140821037F TEST RESULT CERTIFICATION Applicant’s name................. ANYSONIC ELECTRONICS CO．，LIMITED Address ................................ No.72,xin’an Rd,Ludong Dist,Humen Town,Dongguuan City,Guangdong,China Manufacture's Name............ ANYSONIC ELECTRONICS CO．，LIMITED Address................................ No.72,xin’an Rd,Ludong Dist,Humen Town,Dongguuan City,Guangdong,China Product description Product name ...........................BLUETOOTH SPEAKER Model and/or type reference ............................. Booster BTH Serial Model............................. AR5409B, AR5509B Standards............................. FCC Part15.247, RSS-210 Annex 8 Test procedure............................. ANSI C63.4-2003, RSS-Gen Issue 3 This device described above has been tested by ATT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ATT, this document may be altered or revised by ATT, personal only, and shall be noted in the revision of the document. Date of Test................................ ......... Date (s) of performance of tests ............ 20 Aug. 2014 ~31 Aug. 2014 Date of Issue........................................ 31 Aug. 2014 Test Result............................................Pass Testing Engineer : (Jack Yu) Technical Manager : (Jerry You) Authorized Signatory : (Can Liu) Page 3 of 45 Report No.: ATT-20140821037F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 18 3.2.3 DEVIATION FROM TEST STANDARD 18 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 23 4 . POWER SPECTRAL DENSITY TEST 30 4.1 APPLIED PROCEDURES / LIMIT 30 4.1.1 TEST PROCEDURE 30 4.1.2 DEVIATION FROM STANDARD 30 4.1.3 TEST SETUP 30 4.1.4 EUT OPERATION CONDITIONS 30 4.1.5 TEST RESULTS 31 5 . BANDWIDTH TEST 34 5.1 APPLIED PROCEDURES / LIMIT 34 5.1.1 TEST PROCEDURE 34 Page 4 of 45 Report No.: ATT-20140821037F Table of Contents Page 5.1.2 EUT OPERATION CONDITIONS 34 5.1.3 TEST RESULTS 35 6 . PEAK OUTPUT POWER TEST 38 6.1 APPLIED PROCEDURES / LIMIT 38 6.1.1 TEST PROCEDURE 38 6.1.2 DEVIATION FROM STANDARD 38 6.1.3 TEST SETUP 38 6.1.4 EUT OPERATION CONDITIONS 38 6.1.5 TEST RESULTS 39 7 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 40 7.1 DEVIATION FROM STANDARD 40 7.2 TEST SETUP 40 7.3 EUT OPERATION CONDITIONS 40 7.4 TEST RESULTS 41 8 . ANTENNA REQUIREMENT 43 8.1 STANDARD REQUIREMENT 43 8.2 EUT ANTENNA 43 9 . EUT TEST PHOTO 44 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 45 Report No.: ATT-20140821037F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C & RSS-210 Annex 8 Standard Section Test Item Judgment Remark 15.207&7.2.4 Conducted Emission PASS 15.247 (a)(2)& A8.1 6dB Bandwidth PASS 15.247 (b)& A8.4 Peak Output Power PASS 15.247 (c) & A8.5 Radiated Spurious Emission PASS 15.247 (d) & A8.2 Power Spectral Density PASS 15.205& A8.5 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Page 6 of 45 Report No.: ATT-20140821037F 1.1 TEST FACILITY Shenzhen STONE Testing Technology Co.,Ltd. Add.: F/6, Bldg.12, Zhongxing Industrial City, Chuangye Rd., Nanshan District Shenzhen P.R. China FCC Registration No.: 323508; IC Registration No.: 11043A 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 45 Report No.: ATT-20140821037F 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment BLUETOOTH SPEAKER Trade Name N/A Model Name Booster BTH Serial Model AR5409B, AR5509B Model Difference All the models are the same circuit and RF module, except model name. Product Description The EUT is a BLUETOOTH SPEAKER Operation Frequency: 2402~2480MHz Modulation Type: GFSK Bluetooth version： 4.0 Bit Rate of Transmitter 1 Mbps Number Of Channel 40CH Antenna Designation: Please see Note 3. Output Power(Conducted): -1.34dBm Antenna Gain (dBi) 0dbi Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Channel List Please refer to the Note 2. Ratings AC …

Text truncated - open the document above for the full version.

Page 44 of 45 Report No.: ATT-20140901037F 9. EUT TEST PHOTO Radiated Measurement Photos Page 45 of 45 Report No.: ATT-20140901037F Conducted Measurement Photos