2AAED-R9861017ClickShare

Clic kShare R5900019WW/00 24/06 /2014 Safety manual Sicherheitshandbuch Manual de seguridad Manuel de sécurité Manuale per la sicur ezza Veiligheidshandleiding Manual de segurança Manual de segurança Инструкция по технике безопасности Barco nv Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.883.86 Support: www.barco.com/esupport Visit us at the web: www.barco.com Printed in China 1. Safety 1. SAFETY About this chapter Read this chapter attentively, it contains important information to prevent personal injury while using ClickShare. It also includes several cautions to prevent damage to the ClickShare product. Ensure that you understand and follow all safety guidelines, safety instructions and warnings in this chapter before using your ClickShare. Covered ClickShare products Regional versionContainsAccessories included R9861017xx 1 • R9861017 • 2x R9861006D01 • DC adapter with AC clips type A, C, G, I • USB stick with user documentation • Printed safety manual • Wall mount bracket • 2 antennas Contact your local sales representative for the correct regional variant necessary in your environment. About this guide Part numberDescriptionLevel R5900019 Safety Guide Any person that comes in contact with the ClickShare product Always check for the latest version of the manual onwww.barco.com/clickshareClick on Visit the ClickShare product page and go to tab Downloads.. List of available ClickShare documents The ClickShare documentation consists of the following manuals: GuideArticle number User GuideR5900013 Installation GuideR5900014 Safety Guide (this manual)R5900019 Service GuideR5900016 (Only available to Customer Service partners) Button GuideR5900007 Recycling ManualR5900009 (Available upon request) A printed copy of the Safety Guide is included in the ClickShare box at purchase. Please check online for the other documents. 1.1 General safety Safety warnings The installation of the device must comply with the guidelines in the ClickShare Installation Guide (R5900014). 1. xx=EU, CN, NA, WW R5900019 CLICKSHARE 24/06/20141 1. Safety • Only use the DC power adapter supplied with the ClickShare device. • To prevent injuries and physical damage, always read this manual and all labels on the system before connecting to the wall outlet. • The ClickShare product is intended to be used in office and indoor environments only. • Only use the power cord supplied with your device. While appearing to be similar, other power cords have not been safety tested at the factory and may not be used to power the device. For a replacement power cord, contact your dealer. • This product should be operated from an AC power source. Power input is auto-ranging from 100 V to 240 V @ 50 to 60 Hz. • Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. To disconnect the cord, pull it out by the plug. Never pull the cord itself. • If an extension cord is used with this product, make sure that the total of the Ampere ratings on the products plugged into the extension cord does not exceed the extension cord Ampere rating. • Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the se t and have it checked by qualified service personnel before resuming operations. • Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the device due to lightning and AC power-line surges. • Only use attachments/accessories specified by the manufacturer. WARNING:Ensure you understand and follow all safety guidelines, safety instructions, warnings and cau- tions mentioned in the product documentation. WARNING:The mains power plug connected to the wall outlet must be easily accessible at all times for all installation modes. Environment Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it. 1.2 Service Risk of electric shock Do not open. To reduce the risk of electric shock, do not remove the cover. No user- serviceable parts inside. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power cord or plug is damaged or frayed. • If liquid has been spilled into the equipment. • If the product has been exposed to rain or water. • If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of the other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. • If the product has been dropped or the cabinet has been damaged. • If the product exhibits a distinct change in performance, indicating a need for service. • Replacement parts: When replacement parts are required, be surethe service technician has used original BARCO replace- ment parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized substitutions may result in degraded performance and reliabilit y,fire, electric shock or other hazards. Unauthorized substitu- tions may void warranty. • Safety check: Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 1.3 Heat andfire hazard Heat and Fire Hazard Warning – risk offire: do not placeflammable or combustible materials near the device! Barco products are designed and manufactured to meet the most stringent safety regulations. This device radiates heat on its external surfaces during normal operation, which is both normal and safe. Exposingflammable or combustible materials into close proximity…

Text truncated - open the document above for the full version.

Product Number: AN2450-4828RS Product Name: Antenna COR/F-G-15b Specification For Approval Date: 2012 / 11 / 28 File No.: 121128003 Version: 1.0 Customer： 奇揚網科股份有限公司 Customer P/N： / INVAX P/N： AN2450-4828RS Description : Antenna Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-An Town, Dong-Guan City, Guangdong Province, China TEL:886-2-2788-5218 FAX:886-2-2783-1658 TEL:86-769-85388261 FAX:86-769-85317869 htt p://www.invaxsystem.com http://www.cortec.com.cn 300D03000001 Product Number: AN2450-4828RS Product Name: Antenna Page 1 Version: 1.0 Issue Date: 2012-08-28 Index: 1. Specification / Page 2 2. Characteristics and Reliability Test / Page 3 3. Antenna - S Parameter Test Data / Page 4 4. Antenna - Radiation Pattern Test Data / Page 5 5. Mechanical and Packing Drawing / Page 6 ~ 7 6. Material Description and RoHS Test Report / Page 8 ~ end Product Number: AN2450-4828RS Product Name: Antenna Page 2 Version: 1.0 Issue Date: 2012-08-28 1. Specification Sample Photo A. Electrical Characteristics Frequency 2400 ~ 2500 MHz 5150 ~ 5850 MHz S.W.R. <= 2.0 @ 2400 ~ 2500 MHz <= 2.5 @ 5150 ~ 5850 MHz Antenna Gain 2.0 dBi @ 2400 ~ 2500 MHz 2.0 dBi @ 5150 ~ 5850 MHz Efficiency(%) 70~80% @ 2400~2500 MHz 60~70% @ 5150~5850 MHz Radiation Pattern Omni-Directional Max Input Power >= 2 W Polarization Linear Impedance 50 Ohm B. Material & Mechanical Characteristics Material of Radiator CU Material of Plastic Body: TPEE Hinge: ABS Holder: ABS Cable Type RG-178U Connector Type SMA Male Reverse Connector Pull Test >= 3 Kg C. Environmental Operation Temperature - 40 °C ~ + 65 °C Storage Temperature - 40 °C ~ + 80 °C Antenna Color Storage life < 2 year Product Number: AN2450-4828RS Product Name: Antenna Page 3 Version: 1.0 Issue Date: 2012-08-28 2. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual calibration to test Directive DUT specification C2 Ant enna Gain Set DUT on Antenna Chamber; make individual calibration to test Directive DUT specification M1 Vibration GB / T2423 . 48-1997 Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction 1. No Visual Damage 2. Frequency Tol.<= 5% M2 Rand om Drop GB / T2423.8-1995 Height: 1.0 Meter; 3 directions; 1 time for each direction 1. No parts separated 2. Frequency Tol.<= 5% M3 Solderability GB 2423 . 28- 82 Solder iron: 260±5°C; Duration: 5 seconds 1. Mounted on PCB 2. No Visual Damage M4 T erminal- Pull Test Holding with individual specification; force applied to axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M5 T erminal- Torque Test Holding with individual specification; applied clockwise and counterclockwise to the axis of terminal 1. Directive DUT specification 2. Frequency Tol.<= 5% M6 Dimension Inspection of dimension, color, material, package, surface process Directive DUT specification E1 Salt Spray GB / T 2423 . 17- 93 Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E2 Humidity GB / T 2423 . 4 - 93 Temp: 80°C / 12 H; -40°C / 12H RH: >= 90%; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E3 Thermal Shock GB / T 2423 . 22 - 87 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% E4 Life (High Temp.) GB /T 2423 . 2 - 89 Temp: 80°C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2002/95/EC R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC Product Number: AN2450-4828RS Product Name: Antenna Page 4 Version: 1.0 Issue Date: 2012-08-28 3. Antenna - S Parameter Test Data Product Number: AN2450-4828RS Product Name: Antenna Page 5 Version: 1.0 Issue Date: 2012-08-28 4. Antenna - Radiation Pattern Test Data 5. Mechanical Drawing See attached files 6. Material Description and RoHS Test Report See attached files 填表： 時麗 部門： 研發部 職務： 文員 Cd Pb Hg Cr(VI) PBBs PBDEs 1 AN48A-01B Body1 TPEE N.D. N.D. N.D. N.D. N.D. N.D. RLSZD001081200002C 2012.10.10 TPEE CTI 2 AN4803-02B-1 AN57-12B-1 Body2Body3 ABS N.D. N.D. N.D. N.D. N.D. N.D. KA/2012/C1575 2013.01.02 ACRYLONITRILE SGS 3 AN01-1215-P-1 Hinge Pin POM N.D. N.D. N.D. N.D. N.D. N.D. CANEC1302200003 2013.03.01 POM SGS FEP N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120002C 2012.08.21 电线电缆料 CTI PTFE N.D. N.D. N.D. N.D. N.D. N.D. RLSHE001125120001C 2012.08.21 电线电缆料 CTI 鍍銀銅 N.D. N.D. N.D. Negative N.D. N.D. RLSHE001125120003C 2012.08.21 电线电缆料 CTI 5 SMA804-CBR5A56 SMA Male Reverse 銅 19 33794 N.D. Negative CANEC1207370802 2012.06.13 C3604黃銅棒 SGS 6 TUBE-452215TUBE-452310 Tube 銅 19 33794 N.D. Negative CANEC1207370802 2012.06.13 C3604黃銅棒 SGS 7 R-AN225010P Stopper PTFE N.D. N.D. N.D. N.D. N.D. N.D. CANEC1303565401 2013.04.01 PTFE Rod SGS 序號 各構成物料的材質 Cable (RG178) R-RG-178U 4 測試日期 物料型號 物料各構成名稱 測試機構 名稱 歐盟ROHS指令豁免條款2009/95/BC、钢中合金元素中的铅含量达0.35%、铝含量达0.4%、铜合金中的铅含量达4% COR/F-G-47a 康捷電子有限公司 物料中 HSF 對象物質含量調查表 物料名稱： AN2400-4828RS 測試名稱 測試報告裡 RoHS 對應物質測試結果 檢測報告編號 根據測試報告如實填寫鉛、鎘、汞、六價鉻、 PBBs 和 PBDEs 六項禁用物質的含量 包裝材料中鉛、鎘、汞、六價鉻總含量不超過 100ppm ，鎘的允許濃度為 5ppm

Oct. 03,2014 Federal Communications Commission Authorization and Evaluation Division Dear Regulatory Authority, We, the undersigned, hereby declare that Declaration of Conformity procedures will be -- -- applied to the digital device portion ofthe following product: Type: ClickShare Model: R98él017 Test report: E1I20I4/80050 SOS Taiwan Ltd.: TWI076 ( Product Identification) It is herewith confirmed and found to comply with the requirements set up by ANSI C63.4 & FCC PART 15 regulations for the evaluation of electromagnetic compatibility. This Device complies with Part 15 of the FCC rules, operation is subject to the following two conditions. This device may not cause harmful interference and, This device must accept any interference received, including interference that may cause undesired operation. TEST LABORATORY SOS Taiwan Ltd. Electronics & Communication Laboratory No. 134, Wu Kung Rd., Wuku Industrial Zone, New Taipei City, Taiwan. FCC Registration Number: 94644. TAF Accreditation No.: L0513-090505, BSMI MRA Test Lab. Sinc~elL Mr. Chris Desimpel/NPI Project Manager/Barco NV BARCO NV President Kennedypark 35 8500 Kortrijk BELGIUM www barco com

RF _160, Issue 02 Declaration of Authorization We Name: Address: City: Country: Barco NV President Kennedypark 35 8500 Kortrijk Belgium Kortrijk Belgium Declare that: City: Country Willis Chen (1) SGS Taiwan Ltd. No. 134, Wu Kung Rd., New Taipei Industrial Park, Wu Ku District, New Taipei City, Taiwan 24803 New Taipei City Taiwan Name Representative of agent: Agent Company name: Address: is authorized to apply for Certification of the following product(s): Product description: ClickShare Type designation: R9861017 Trademark: Barco on our behalf. Date: Oct. 03, 2014 City: Kortrijk Name: Mr. Chris Desimpel (2) Function: NPI Project Manager Signature: BARCO NV ..... "'P~~~i'dent Kennedypark 35 8500 Kortrijk BELGIUM Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code "owner" or the authorized agent.

FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 EXTERNAL PHOTOGRAPHS OF EUT FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group All View of EUT Front View of EUT FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT – 1 FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 2 Side View of EUT – 3 FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this te…

Text truncated - open the document above for the full version.

Label Location (Back Side)

FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group APPENDIX 2 INTERNAL PHOTOGRAPHS OF EUT FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Open View of EUT-1 Open View of EUT-2 FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Internal View of EUT-1 Internal View of EUT-2 FCC ID: 2AAED-R9861017 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Internal View of EUT-3 Internal View of EUT-4 FCC ID: 2AAED-R9861017 Unless otherwise stated the results …

Text truncated - open the document above for the full version.

Report No.: E2/2014/80049 FCC ID: 2AAED-R9861017 Issue Date: Oct. 09, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group 14 MAXIMUM PERMISSIBLE EXPOSURE (MPE) 14.1 Standard Applicable According to 1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Com- mission’s guideline. This is a Mobile device, the MPE is required. According to 1.1310 and 2.1093 RF exposure is calculated. Limits for Maximum Permissive Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minute) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f 2 ) 30 30-300 27.5 0.073 0.2 30 300-1500 / / F/1500 30 1500-15000 / / 1.0 30 F = frequency in MHz * = Plane-wave equipment power density Report No.: E2/2014/80049 FCC ID: 2AAED-R9861017 Issue Date: Oct. 09, 2014 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group 14.2 Maximum Permissible Exposure (MPE) Evaluation 802.11a Power Table Frequency (MHz) Output Power (dBm) Output Power (W) Limit (W) 5180 9.68 0.00929 1 5220 9.18 0.00828 1 5240 8.85 0.00767 1 5745 9.08 0.00809 1 5785 8.58 0.00721 1 5825 7.83 0.00607 1 MPE Prediction (802.11a) Prediction of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4R 2 Where: S = Power density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotropic radiator R = Distance to the center of radiation of the antenna Maximum peak output power at antenna input terminal: 9.68 (dBm) Maximum peak output power a…

Text truncated - open the document above for the full version.