2AAHFBCS2-TExmobaby sensor

User Manual www.exmovere.com Please read this manual thoroughly before using the product. Exmobaby For Your Safety Exmobaby has been created to give parents the piece of mind and increased security knowing they can confidently check on their baby and monitor it in real time even when they are away and not in the same room as their child. Read these simple SAFETY guidelines. They are meant to give you and your baby the best user experience for both you. Please note that not following these Instructions could damage your Exmobaby system, or interfere with its use and its protective applications. Misuse could interfere with or violate your warranty and end your user license. In the worse case scenario, misuse could even make the unit potentially harmful. INTERFERENCE All wireless devices like cellular telephones are susceptible to interference. Interference can affect performance. For example, you should not use the Exmobaby while flying in an airplane as it could interfere with the use of the airplane or the Exmobaby signal. SWITCH OFF NEAR LARGE, UNUSUAL STRONG VIBRATIONS Follow any restrictions given to you by health and safety authorities at all times. Exmpbaby is a sensor device that must be carefully handled. For example, turn off Exmobaby when explosives or blasting are in progress. QUALIFIED SERVICE Only qualified and trained personnel may install or repair this product. ACCESSORIES AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products to Exmobaby. WATER-RESISTANCE The pajama garment itself should be regularly cleaned and washed in water. When washing, make sure the sensors and electronics are not exposed to water. Exmobaby sensors and electronics are not water- proof. Only the pajama garment should be washed or submersed in water. Like any cell phone device make sure the electronics and sensors are not exposed to moisture. For Your Safety Contents • About your device...........................................................................Page 1 • Network service..............................................................................Page 2 • Items in packaging.................................................................Page 3 • Keys and parts................................................................................Page 4 • Getting started................................................................................Page 7 • How to use the product...................................................................Page 10 • Something you need to know..........................................................Page 15 • Battery information..........................................................................Page 17 • Care and maintenance....................................................................Page 18 • Certification information...................................................................Page 21 • Technical Specifications...................................................................Page 22 About Exmobaby Exmobaby has been created to give parents the piece of mind and increased security of knowing they can confidently check on their baby and monitor it in real time even when not in the same room. The Exmobaby brand and products are part of Exmovere Wireless, LLC, a company based in Alexandria, Virginia ( www.exmovere.com ). The Exmobaby apparel and sensor kit for infants are the first-ever baby garments developed for remote monitoring of heart rate, emotional state and behavior in babies. While you are away from your baby you can receive important messages and data about your baby. Every unit included in each Exmobaby kit consists of fully washable baby clothing that connect to a Velcro conductive fiber strap, a heart shaped detachable transceiver that communicates the real time information about your baby to your smart phone; and provides software to process data thereby providing a record of your child's physical states to online care providers. The software means that parents can record physical states of your child such as hunger or tiredness. This allows care providers to predict likely causes of future events like when your child needs a nap or needs to be fed. With parent and caregiver input, the technology can learn over time and help predict baby’s future emotional, physical and behavior states and needs. 1 www.exmovere.com Network Service  Your Exmobaby system has provided to you unlocked. That means you will need to get your own SIM card. The right SIM card will operate on GSM/EDGE 850, 900, 1800 and 1900 MHz networks.  To use Exmobaby, your SIM card must come with service from a wireless provider. Many of the features require special network features. Some networks may require that you make specific arrangements with your service provider before you can use the network services. Your service provider can give you instructions and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. www.exmovere.com 2 After opening the package, Please check the following components, if found which is incomplete or damaged, please contact your Exmobaby dealer or retailer.  4 garments in 4 different sizes  Heart rate belt  Power adapter  USB cable  Heart-shaped sensor  GSM transmission base  Antenna  Display controller unit  Warranty card  User manual 3 www.exmovere.com Items Inside The Box 1. Exmobaby Pajama Snap-fastener Belt Velcro flap Groove (for the temperature sensor hole） www.exmovere.com The temperature sensor hole The heart rate sensor holes 4 System Parts Power indicator Communication status indicator Charging indicator Sensor USB Antenna SIM card slot Power button SOS button Menu Settings Baby's status USB Back to menu ON/OFF button Control button 2. Transmission Base & Controller 5 www.exmovere.com Description of the product Reset button …

Text truncated - open the document above for the full version.

Test Lab Attestation Letter This attestation is to confirm that the below listed device was tested and report at our Test Facilities located at: Test Lab Name: NTEK Testing Technology Co., Ltd. Test Lab Address: 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’ an District, Shenzhen P.R. China Test Lab Registration Number: 238937 Date of Test: 10 June 2013 ~19 June 2013 Test Report Number: F-D201306002 Applicant Name: Exmovere Wireless, LLC FCC ID: 2AAHFBCS2-T Name of Engineer(s) Performing Test: Apple Huang TEST LABORATORY: Signature of Authorized Representative of the Test Laboratory: Full Contact Name: Bovey yang E-mail [email protected] Position/Title: Manger

Exmovere Wireless, LLC SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 Exmovere Wireless, LLC SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 2013/09/13 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _____ Exmovere Wireless, LLC _____hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product： Exmobaby sensor Trade Name： N/A Model Name： BCS2 Serial Model： N/A FCC ID 2AAHFBCS2-T We affirm that between SIEMIC and ___ Exmovere Wireless, LLC ___, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title : Ginn Yin / Manger Contact information / address : Suite 200,2121 Eisenhower Ave, Alexandria, Virginia 22314, United States

Exmovere Wireless, LLC SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 Exmovere Wireless, LLC SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 2013/09/13 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AAHFBCS2-T We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Ginn Yin / Manger Contact information / address : Suite 200,2121 Eisenhower Ave, Alexandria, Virginia 22314, United States

Page 1 of 4 PHOTOGRAPHS OF EUT Photo1 Photo2 Page 2 of 4 Photo3 Photo4

Label FCC ID: 2AAHFBCS2-T This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Page 3 of 4 Photo5 Photo6 Page 4 of 4 Photo7 Photo8

FCC ID: 2AAHFBCS2-T RF EXPOSURE TEST SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation17  The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID: 2AAHFBCS2-T The max.output power E.I.R.P is 1.474dBm=1.40411mW, Frequency is 0.433GHz So (1.40411/5)* √0.433=0.18≤ 3.0 Conclusion: No SAR is required.

RADIO TEST REPORT FCC ID: 2AAHFBCS2-T IC: 11224A-BCS2T Product： Exmobaby sensor Trade Name： N/A Model Name： BCS2 Serial Model： N/A Report No.： F-D201306002 Prepared for Exmovere Wireless, LLC Suite 200,2121 Eisenhower Ave, Alexandria, Virginia 22314, United States Prepared by DTT Services Co., Ltd 1F,2 Block,Jiaquan Building,Guanlan High-tech Park,Baoan District, Shenzhen,Guandong,China Tel.: +86-755-27521059 Fax.: +86-755-27521011 Website: www.dtt-service.com Page 2 of 29 Report No.: F-D201306002 ` TEST RESULT CERTIFICATION Applicant’s name ................. : Exmovere Wireless, LLC Address ................................. : Suite 200,2121 Eisenhower Ave, Alexandria, Virginia 22314, United States Manufacture's Name ............ : Shenzhen Growwin Technology Co., Ltd Address ................................. : 3rd Floor, Unit2, Building 2, Guanghui science park, Min Qing Lu, Bao An Qu, Shenzhen, Guangdong, China Product description Product name............................ : Exmobaby sensor Model and/or type reference : BCS2 Serial Model： N/A Rating(s) ................................ : DC 3.7V Standards ............................. : FCC Part15.231, RSS-210 Issue 8 Annex 1 Test procedure ............................... : ANSI C63.4-2003, RSS-Gen Issue 3 This device described above has been tested by NTEK, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of NTEK, this document may be altered or revised by NTEK, personal only, and shall be noted in the revision of the document. Date of Test ........................................... : Date (s) of performance of tests ............. : 10 June 2013 ~19 June 2013 Date of Issue .......................................... : 20 June 2013 Test Result.............................................. : Pass Testing Engineer : (Apple Huang) Technical Manager : (Tom Zhang) Authorized Signatory : (Bovey Yang) Page 3 of 29 Report No.: F-D201306002 ` Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 8 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 10 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 11 3 . ANTENNA REQUIREMENT 12 3.1 STANDARD REQUIREMENT 12 3.2 EUT ANTENNA 12 3.3 CONDUCTED EMISSION MEASUREMENT 13 3.3.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.3.2 TEST PROCEDURE 14 3.3.3 DEVIATION FROM TEST STANDARD 14 3.3.4 TEST SETUP 14 3.2.5 TEST RESULT 15 3.4 RADIATED EMISSION MEASUREMENT 16 3.4.1 RADIATED EMISSION LIMITS 16 3.4.2 TEST PROCEDURE 17 3.4.3 DEVIATION FROM TEST STANDARD 17 3.4.4 TEST SETUP 18 3.4.5 TEST RESULTS (BELOW 30MHZ) 20 3.4.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 21 4 . BANDWIDTH TEST 23 4.1 TEST PROCEDURE 23 4.2 DEVIATION FROM STANDARD 23 4.3 TEST SETUP 23 4.4 TEST RESULTS 24 5 . PEAK OUTPUT POWER TEST 25 5.1 TEST PROCEDURE 25 5.2 DEVIATION FROM STANDARD 25 5.3 TEST SETUP 25 5.4 EUT OPERATION CONDITIONS 25 5.5 TEST RESULTS 25 Page 4 of 29 Report No.: F-D201306002 ` Table of Contents Page 6 . TRANSMITTER TIMEOUT 26 6.1 LIMIT 26 6.2 TEST PROCEDURE 26 6.3 TEST SETUP 26 6.4 TEST RESULTS 27 7 . EUT TEST PHOTO 29 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 29 Report No.: F-D201306002 ` 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.231) and RSS-210 Issue 8 Annex 1 Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A Note(1) 15.203 Antenna Requirement Pass 15.231 Radiated Spurious Emission Pass 15.231 Occupied Bandwidth Pass 15.231 Deactivation Time Pass NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. Page 6 of 29 Report No.: F-D201306002 ` 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.:238937; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 29 Report No.: F-D201306002 ` 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Exmobaby sensor Trade Name N/A Model Name BCS2 Serial Model N/A Model Difference N/A Product Description The EUT is a Exmobaby sensor Product Type Low Power Communication Device Transmitter Operation Frequency: 433.92MHz Modulation Type: ASK Number Of Channel 1CH. Antenna Designation: Wire Spiral antenna Antenna Gain(Peak) 0.16 dBi Output Power: 69.86 dBuV/m (AV Max.) More details of EUT technical specification, please refer to the User's Manual. Channel List N/A Adapter N/A Battery DC 3.7V Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Table for Filed Antenna Ant . Brand Model Name Antenna Type Connector Gain (dBi) NOTE 1 N/A N/A Spiral Antenna N/A 0.16 Antenna Page 8 of 29 Report No.: F-D201306002 ` 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Descri…

Text truncated - open the document above for the full version.

Page 28 of 28 Report No.: F-D201306002 ` 6. EUT TEST PHOTO Radiated Measurement Photos(worst case position)