2AAHXBM-870Bluetooth headphone

BOOM PODS TM www.boompods.com wireless air pods 34 765 General guidelines:Keep away from high temperature or prolonged exposure to direct sunlight.Avoid contact with liquids.Do not insert any conductive objects into the sound box.Do not disassemble.Do not drop the product.Keep out of reach of children.Warranty:Your BOOM PODS product is guaranteed against any defects in material or workmanship for one full year from the date of original purchase providing it has not been disassembled and it has not suffered accidental damage such as a knock or immersion in water, etc.The device must be used in accordance with the user manual. The warranty is subject to presentation of the original invoice or receipt from the retailer and does not apply to normal wear and tear or to any device that has been misused or tampered with. It should be returned to the local service centre, the service centre will not bear any shipping cost of the returned item.Please check www.boompods.com for your local service centre. TM Introduction:Before using your wireless Airpods for the first time, please take a few moments to read through the user manual. BOOMPODS designed in the UK by DT Design Ltd. All rights reserved ©2014. This product uses BOOMPODS technology and is covered by international patents, wireless air pods - IP: 201430125253.2 TM TM mobile, tablet & MP3 folding design mic User Manual 10hr play L E D M I C 1- On/Off/Pair mode 2- Press & hold - Volume down/Quickly press - previous song 3- Play/Pause 4- Press & hold - Volume up/Quickly press - next song 5- LED 6- Microphone 7- Micro USB charging & audio port Bluetooth operation:1. Activate your phone’s Bluetooth function and enter its searching mode.2. Press & hold the on/off button (1) on your Airpods until the LED (5) flashes red & blue – this will activate the pairing mode. Please note the pairing will take approx. 10 seconds 21 back front 3. Your mobile phone will automatically find a new Bluetooth device called “airpods”. Connect to this device and wait until the LED (5) has turned to a slow flashing blue. This indicates that your Airpods are now successfully connected. 4. Please adjust the sound to a moderate volume and enjoy your music.5. To switch off your Airpods, press and hold the on/off button (1) until the LED (5) turns red then release the button. Receiving incoming calls:When receiving an incoming call, your music track will pause & you will be able to hear your regular mobile ringtone. To accept the call, press the on/off button (1) once. To reject the call press twice. Once the call is finished, your track will start again automatically. Wired operation:You can use your Airpods as a wired headphone to increase battery life. Simply switch off your Airpods and then connect the 3.5mm line-in cable to your audio source and the Micro USB end to your Airpods (7). Charging:To charge, simply connect the USB cable end directly to a PC, laptop or mains USB & the Micro USB end to your Airpods (7). The LED light on your headpods will turn red whilst charging and turn off when fully charged. Please note whilst charging, you will not be able to use your Airpods in play mode. Package contents:1x wireless airpods stereo headset 1x Micro USB/USB cable 1x 3.5mm audio/ Micro USB cable 1x Travel bag1x User manual Technical details:    20MW      250mAh 3.7V          2-3 hours     10m ! "#     $%!' BOOM PODS TM music . any where . every where Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  ƽReorient or relocate the receiving antenna. ƽIncrease the separation between the equipment and receiver. ƽConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. ƽConsult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by iLike Electronics Co.,Ltd. may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

iLike Electronics Co.,Ltd. Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China TEL: +86-755-28055855 FAX: +86-755-29807111 DATE 09-25-2014 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAHXBM-870 Product Name: Bluetooth headphone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 09-25-2014 By: Mandy Zhao Signature Printed Title: General Manager On behalf of : iLike Electronics Co.,Ltd. Telephone: +86-755-28055855

iLike Electronics Co.,Ltd. Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China TEL: +86- 755-28055855 FAX: +86- 755-29807111 USB Port Statement FCC ID: 2AAHXBM-870 Date: Sept.23, 2014 To whom it may concern: We, the undersigned, state that the device's (Model: BM-870) USB port only used for charge, no any data transfer to PC. Sincerely, Mandy Zhao/General Manager

FCC ID Label Information 1. Label location: 2. FCC ID Label: iLike Electronics Co.,Ltd. Bluetooth headphone Model: BM-870 FCC ID: 2AAHXBM-870

RF Exposure evaluation According to KDB 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unitless), E = electric field strength in V/m, --- 10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m)---3m So pt = (EXd) 2 /30 x gt Ant gain 0dBi, so Ant numeric gain=1 Field strength = 73.35 dBuV/m @3m So EIRP={ [10 ( 73.35 /20) /10 6 x3] 2 /30 }x1000 mW =0.006 mW So (0.006mW/5mm)x √2.480 GHz =0.002 <3 Then SAR evaluation is not required

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 FCC PART 15 SUBPART C TEST REPORT FCC Part 15.249 Report Reference No......................: CTL1409012201-WF01 Compiled by ( position+printed name+signature)..: File administrators Jacky Chen Name of the organization performing the tests ( position+printed name+signature)..: Test Engineer Tracy Qi Approved by ( position+printed name+signature)..: Manager Tracy Qi Date of issue.....................................: Sept. 23, 2014 Test Firm..........................................: Shenzhen CTL Testing Technology Co., Ltd. Address.............................................: Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China. Applicant’s name............................: iLike Electronics Co.,Ltd. Address.............................................: Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China Test specification: Standard ...........................................: FCC Part 15.249: Operation within the bands 920-928 MHz, 2400- 2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. TRF Originator ..................................: Shenzhen CTL Testing Technology Co., Ltd. Master TRF.......................................: Dated 2011-01 Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Bluetooth headphone Trade Mark .......................................: N/A Models/Type reference.....................: BM-870 Modulation .......................................: FHSS Work Frequency...........................: 2402 MHz~2480 MHz Antenna Type..............................: internal FCC ID .............................................: 2AAHXBM-870 Result................................................: Positive V1.0 Page 2 of 33 Report No.: CTL1409012201-WF01 T E S T R E P O R T Test Report No. :CTL1409012201-WF01 Sept. 23, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : Bluetooth headphone Model /Type : BM-870 Applicant : iLike Electronics Co.,Ltd. Address : Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China Manufacturer iLike Electronics Co.,Ltd. Address Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 33 Report No.: CTL1409012201-WF01 Contents 1.TEST STANDARDS .................................................................. 4 2.SUMMARY............................................................................. 5 2.1.General Remarks 5 2.2.Equipment Under Test 5 2.3.Short description of the Equipment under Test (EUT) 5 2.4.EUT operation mode 6 2.5.EUT configuration 6 2.6.Related Submittal(s) / Grant (s) 6 2.7.Modifications 6 3. TEST ENVIRONMENT............................................................... 7 3.1.Address of the test laboratory 7 3.2.Test Facility 7 3.3.Environmental conditions 7 3.4.Configuration of Tested System 7 3.5.Statement of the measurement uncertainty 8 3.6.Equipments Used during the Test 9 4. TEST CONDITIONS AND RESULTS ............................................ 10 4.1.Conducted Emissions Test 10 4.2.Radiated Emission Test 14 4.3.Band Edge Measurement 19 4.4.Occupied Bandwidth Measurement 23 5. ANTENNA REQUIREMENT ....................................................... 25 6.TEST SETUP PHOTOS OF THE EUT .......................................... 26 7.EXTERNAL AND INTERNAL PHOTOS OF THE EUT ....................... 29 V1.0 Page 4 of 33 Report No.: CTL1409012201-WF01 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. ANSI C63.4-2009 V1.0 Page 5 of 33 Report No.: CTL1409012201-WF01 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : Sept. 10, 2014 Testing commenced on : Sept. 10, 2014 Testing concluded on : Sept. 24, 2014 2.2.Equipment Under Test Power supply system utilised Power supply voltage : o 120V / 60 Hz o 115V / 60Hz o 12 V DC o 24 V DC ƽ Other (specified in blank below) DC 3.7V from battery 2.3. Short description of the Equipment under Test (EUT) The EUT is a Bluetooth Speaker work at 2402~2480 MHz support Bluetooth 3.0. Channel List: Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 00 2402 27 2429 54 2456 01 2403 28 2430 55 2457 02 2404 29 2431 56 2458 03 2405 30 2432 57 2459 04 2406 31 2433 58 2460 05 2407 32 2434 59 2461 06 2408 33 2435 60 2462 07 2409 34 2436 61 2463 08 2410 35 2437 62 2464 09 2411 36 2438 63 2465 10 2412 37 2439 64 2466 11 2413 38 2440 65 2467 12 2414 39 2441 66 2468 13 2415 40 2442 67 2469 14 2416 41 2443 68 2470 15 2417 42 2444 69 2471 16 2418 43 2445 70 2472 17 2419 44 2446 71 2473 18 2420 45 2447 72 2474 19 2421 46 2448 73 2475 20 2422 47 2449 74 2476 21 2423 48 2450 75 2477 22 2424 49 2451 76 2478 23 2425 50 2452 77 2479 24 2426 51 2453 78 2480 25 2427 52 2454 26 2428 53 2455 Modulation: 1Mbps(GFSK), 2Mbps(Pi/4 DQPSK), 3Mbps(8DPSK) For more details, refer to the user’s manual of the EUT. Serial number: Prototype V1.0 Page 6 of 33 Report No.: CTL1409012201-WF01 …

Text truncated - open the document above for the full version.

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 FCC PART 15 SUBPART C TEST REPORT FCC Part 15.249 Report Reference No......................: CTL1409012201-WF02 Compiled by ( position+printed name+signature)..: File administrators Jacky Chen Name of the organization performing the tests ( position+printed name+signature)..: Test Engineer Tracy Qi Approved by ( position+printed name+signature)..: Manager Tracy Qi Date of issue.....................................: Sept. 23, 2014 Test Firm..........................................: Shenzhen CTL Testing Technology Co., Ltd. Address.............................................: Floor 1-A, Baisha Technology Park, No. 3011, Shahexi Road, Nanshan, Shenzhen 518055 China. Applicant’s name............................: iLike Electronics Co.,Ltd. Address.............................................: Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China Test specification: Standard ...........................................: FCC Part 15.249: Operation within the bands 920-928 MHz, 2400- 2483.5 MHz, 5725-5850 MHz and 24.0 - 24.25 GHz. TRF Originator ..................................: Shenzhen CTL Testing Technology Co., Ltd. Master TRF.......................................: Dated 2011-01 Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .................... : Bluetooth headphone Trade Mark .......................................: N/A Models/Type reference.....................: BM-870 Modulation .......................................: GFSK Work Frequency...........................: 2402 MHz~2480 MHz Antenna Type..............................: internal FCC ID .............................................: 2AAHXBM-870 Result................................................: Positive V1.0 Page 2 of 33 Report No.: CTL1409012201-WF02 T E S T R E P O R T Test Report No. :CTL1409012201-WF02 Sept. 23, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : Bluetooth headphone Model /Type : BM-870 Applicant : iLike Electronics Co.,Ltd. Address : Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China Manufacturer iLike Electronics Co.,Ltd. Address Industrial Areas of Ai Li Ji,Ju Ling old village, Dashuikeng, Guanlan, Longhua New District, Shenzhen, China Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 33 Report No.: CTL1409012201-WF02 Contents 1.TEST STANDARDS .................................................................. 4 2.SUMMARY............................................................................. 5 2.1.General Remarks 5 2.2.Equipment Under Test 5 2.3.Short description of the Equipment under Test (EUT) 5 2.4.EUT operation mode 5 2.5.EUT configuration 6 2.6.Related Submittal(s) / Grant (s) 6 2.7.Modifications 6 3. TEST ENVIRONMENT............................................................... 7 3.1.Address of the test laboratory 7 3.2.Test Facility 7 3.3.Environmental conditions 7 3.4.Configuration of Tested System 7 3.5.Statement of the measurement uncertainty 8 3.6.Equipments Used during the Test 9 4. TEST CONDITIONS AND RESULTS ............................................ 10 4.1.Conducted Emissions Test 10 4.2.Radiated Emission Test 14 4.3.Band Edge Measurement 19 4.4.Occupied Bandwidth Measurement 23 5. ANTENNA REQUIREMENT ....................................................... 25 6.TEST SETUP PHOTOS OF THE EUT .......................................... 26 7.EXTERNAL AND INTERNAL PHOTOS OF THE EUT ....................... 29 V1.0 Page 4 of 33 Report No.: CTL1409012201-WF02 1. TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.249: Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz, 5725 - 5875 MHz, and 24.0 - 24.25 GHz. ANSI C63.4-2009 V1.0 Page 5 of 33 Report No.: CTL1409012201-WF02 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : Sept. 10, 2014 Testing commenced on : Sept. 10, 2014 Testing concluded on : Sept. 24, 2014 2.2.Equipment Under Test Power supply system utilised Power supply voltage : o 120V / 60 Hz o 115V / 60Hz o 12 V DC o 24 V DC ƽ Other (specified in blank below) DC 3.7V from battery 2.3. Short description of the Equipment under Test (EUT) The EUT is a Bluetooth Speaker work at 2402~2480 MHz support Bluetooth 4.0 BLE. Channel List: Channel Frequency (MHz) Channel Frequency (MHz) 00 2402 20 2442 01 2404 21 2444 02 2406 22 2446 03 2408 23 2448 04 2410 24 2450 05 2412 25 2452 06 2414 26 2454 07 2416 27 2456 08 2418 28 2458 09 2420 29 2460 10 2422 30 2462 11 2424 31 2464 12 2426 32 2466 13 2428 33 2468 14 2430 34 2470 15 2432 35 2472 16 2434 36 2474 17 2436 37 2476 18 2438 38 2478 19 2440 39 2480 Modulation: GFSK For more details, refer to the user’s manual of the EUT. Serial number: Prototype 2.4. EUT operation mode Test Mode(TM) Description Remark TM1 Bottom Channel Transmitting / TM2 Middle Channel Transmitting / TM3 Top Channel Transmitting / TM4 Charging and keeping tx USB power by PC V1.0 Page 6 of 33 Report No.: CTL1409012201-WF02 The field strength of radiation emission was measured in the following position: EUT stand-up position (Y axis), lie-down position (X, Z axis). The following data show only…

Text truncated - open the document above for the full version.