2AAHYWB800DU1E43D7LED TV

LED COLOR TV Please read these instructions before operating your set and retain them for future reference. Model: Operating Instruction PRECAUTION Note If the manual is inconsistent with the product,please refer to the actual product. WARNING Using cabinets or stands recommended by the manufacturer of the television set. Only using furniture that can safely support the television set. Ensuring the television set is not overhanging the edge of the supporting furniture. Not placing the television set on tall furniture (for example, cupboards or bookcases)without anchoring both the furniture and the television set to a suitable support. Not placing the televisions set on cloth or other materials that may be located between the television set and supporting furniture. Educating children about the dangers of climbing on furniture to reach the Television set or its controls. Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries,particularly to children, can be avoided by taking simple precautions such as: If your existing television set is being retained and relocated,the same considerations as above should be applied. IMPORTANT INFORMATION Using cabinets or stands recommended by the manufacturer of the television. Only using furniture that can safely support the television. Ensuring the television is not overhanging the edge of the supporting furniture. Not placing the television on tall furniture (for example, cupboards or Bookcases)without anchoring both the furniture and the television to a Suitable Support. Not standing the televisions on cloth or other materials placed between the television and supporting furniture. Educating children about the dangers of climbing on furniture to reach the television or its controls. If a television is not positioned in a sufficiently stable location,it can be potentially hazardous due to falling.Many injuries,particularly to children, can be avoided by taking simple precautions such as: CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Used batteries should not be thrown into the garbage can, please leave them at an appropriate depot. CAUTION Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. CAUTION These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Attention: Motionless picture might cause permanent destruction to the display. Be sure not to display motionless picture on the LED TV for more than 2 hours, because it would cause picture remnants to appear, which is called "screen burns". To avoid such picture remnants, please decrease the "contrast" and "brightness" of the display when displaying motionless picture. While watching TV program in 4:3 size mode for a long time, there would . be traces on the edge of the screen's left, right and center parts because of different transmition of the light on the screen.Similar impact on the screen will occur when playing DVD or connecting games control. Products destroyed by these reasons can't be guaranteed for maintenance. It might cause picture remnants to display electronic games and motionless . picture of PC more than a period of time.To avoid such effect, please decrease the "contrast" and "brightness" when displaying motionless picture. Place the TV on a firm and flat surface,leaving a space of at lease 10cm around the set and 30cm from the top of the set to the wall or cabinet.Ensure the TV is positioned close to the wall to avoid it falling when pushed. 10cm30cm10cm10cm When you turning the TV set,do not hold the top side of the TV set ,you should hold the bottom side . When you lifting the TV set,do not use one hand to handle it,you should lift the TV set by two hands. 1 5. .................................................................................................... TV 3. Launcher ................................................................................................................. CONTENTS 1 LED COLOR TV 1. Connection and Preparation of TV........................................................................... 1.1 Accessories ....................................................................................................... 1.2 Installation of Stand............................................................................................ 1.3 Keys and Interfaces............................................................................................ 1.4 Remote Control................................................................................................... 1.5 Installation of Batteries....................................................................................... 2. Basic Operation........................................................................................................ 2.1 Power ON/Off(optional)...................................................................................... 2.2 Setting of Standby Mode ................................................................................... 2 2 2 3 4 5 5 5 5 Main Menu on TV 6 4. Input source Menu ................................................................................................... 6 6 6. Technical Specification ............................................................................................ 7. Supported Signal Modes.......................................................................................... 8. Simple Troubleshooting ........................................................................................... 13 14 12 1.Connection and Preparation of TV 1.1 Accessor…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER Date:2025-11-26 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Company Name: United Consulting Technology Services Co., Ltd. Grantee Code: 2AAHY FRN 0033495714 Contact Name: CHANG BIN Huang Contact Name: David Wu Address: Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District, Zhuhai,Guangdong,China Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States Telephone: 0756-6827399 Telephone: (626) 217-4022 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AAHYWB800DU1E43D7 ATTN: Director of Certification: We, Jinpin Electrical Company Ltd.ZhuHai.S.E.Z and United Consulting Technology Services Co., Ltd. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Jinpin Electrical Company Ltd.ZhuHai.S.E.Z and United Consulting Technology Services Co., Ltd. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): CHANG BIN Huang Name (Printed): David Wu Title: egineer Signature: 2025.11.26 21:06:44 +08'00' Title: General Manager Signature:

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Address Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District, Zhuhai,Guangdong,China FRN 0022777783 Grantee Code 2AAHY FCC ID: 2AAHYWB800DU1E43D7 Authorized Contact Name CHANG BIN Huang Contact Phone 0756-6827399 Contact Email [email protected] Jinpin Electrical Company Ltd.ZhuHai.S.E.Z (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is / is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date:2025-11-26 Print Name: CHANG BIN Huang Title: engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Address Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District, Zhuhai,Guangdong,China FRN 0022777783 Grantee Code 2AAHY FCC ID: 2AAHYWB800DU1E43D7 Authorized Contact Name CHANG BIN Huang Contact Phone 0756-6827399 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date:2025-11-26 Print Name: CHANG BIN Huang Title: engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Date: 2025-11-26 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: 2AAHYWB800DU1E43D7 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own.. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Jinpin Electrical Company Ltd.ZhuHai.S.E.Z. This authorization is valid until further written notice from the applicant. Print Name: CHANG BIN Huang Title: engineer Signature: On behalf of Company: Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Telephone: 0756-6827399 E-mail: [email protected]

Jinpin Electrical Company Ltd.ZhuHai.S.E.Z TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID:2AAHYWB800DU1E43D7 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’srules, the applicant herebyrequest confidential treatment of the documents listed below, associatedwith the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, theapplicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCBper FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: CHANGBIN.Huang Title:engineer Signature: On behalf of Company: Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Telephone:0756-6827399 E-mail: [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 1 of 3 Appendix External Photos for SZCR2511005164AT FCC ID: 2AAHYWB800DU1E43D7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 2 of 3 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 3 of 3 - End of the Appendix -

MODEL NO.: E43D72B LED TV CAUTION:TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE SCREWS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PRECAUCIÓN: PARA EVITAR DESCARGAS ELÉCTRICAS, NO RETIRE LOS TORNILLOS. NO HAY PIEZAS REPARABLES POR EL USUARIO. CONSULTE EL SERVICIO AL PERSONAL DE SERVICIO CALIFICADO. ATTENTION: POUR ÉVITER LES DÉCHARGES ÉLECTRIQUES, N'ENLEVEZ PAS LES VIS. AUCUNE PIÈCE RÉPARABLE PAR L'UTILISATEUR À L'INTÉRIEUR NE CONSULTEZ UN PERSONNEL D'ENTRETIEN QUALIFIÉ. SERIAL NO.: Rated value AC100-240V , 50/60Hz Power Consumption: 75W FCC ID:2AAHYWB800DU1E43D7

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 1 of 4 Appendix Internal Photos for SZCR2511005164AT FCC ID: 2AAHYWB800DU1E43D7 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251100516404 Page: 1 of 12 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2511005164AT Applicant: Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Address of Applicant: Building 4,No.55,Jinchuan Road,Hongqi Town, Jinwan District, Zhuhai, China Manufacturer: Jinpin Electrical Company Ltd. Zhuhai S.E.Z. Address of Manufacturer: Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District,Zhuhai, Guangdong,China Factory: Jinpin Electrical Company Ltd. Zhuhai S.E.Z. Address of Factory: Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District,Zhuhai, Guangdong,China Equipment Under Test (EUT): EUT Name: LED TV Model No.: E43xxy#/Q43xxy#/H43xxy#("x”=A-Z or 0-9,"y"= 0-9 or blank ,“#”=A-Z or 0-9), VI-43T232, HYT43A1A01   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: JPE, VIOS, HY FCC ID: 2AAHYWB800DU1E43D7 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2025-11-24 Date of Evaluation: 2025-11-24 to 2025-11-28 Date of Issue: 2025-11-28 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251100516404 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2025-11-28 Original Authorized for issue by: Bill Chen/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251100516404 Page: 3 of 12 2 Contents Page 1 Cover Page ......................................................................................................................................... 1 2 Contents ............................................................................................................................................. 3 3 General Information............................................................................................................................ 4 3.1 General Description of E.U.T. ....................................................................................................... 4 3.2 Details of E.U.T. ........................................................................................................................... 4 3.3 Separation Distance ..................................................................................................................... 5 3.4 Test Location ............................................................................................................................... 6 3.5 Test Facility .................................................................................................................................. 6 3.6 Deviation from Standards ............................................................................................................. 6 3.7 Abnormalities from Standard Conditions ....................................................................................... 6 4 FCC Radiofrequency radiation exposure limits ................................................................................ 7 4.1 Blanket 1 mW Blanket Exemption ................................................................................................. 7 4.2 MPE-based Exemption ................................................................................................................. 7 4.3 SAR-based Exemption ................................................................................................................. 8 5 Measurement and Calculation ..........................................................................................................10 5.1 Maximum transmit power ............................................................................................................10 5.2 RF Exposure Calculation .............................................................................................................11 6 EUT Constructional Details (EUT Photos) ........................................................................................12 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251100516404 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power Supply: AC 100-240V, 50/60Hz 3.0V DC (1.5V x 2 "AAA" Size Batteries) for remote controller For BT: Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: FPC Antenna Antenna Gain: 2.71dBi For BLE: Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Rate data: 1Mbps and 2Mbps Antenna Type: FPC Antenna Antenna Gain: 2.71dBi For 2.4G WIFI: Operation Frequency: 802.11b/g/n(HT20)/ax(HEW20): 2412MHz to 2462MHz;802.11n(HT40)/ax(HEW40): 2422MHz to 2452MHz Modulation Type: 802.11b: DSSS (DBPSK, DQPSK, CCK); 802.11g/n: OFDM (BPSK, QPSK, 16QAM, 64QAM); 802.11ax: OFDMA (BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024-QAM) Number of Channels: 802.11b/g/n(HT20)/ax(HEW20):11;802.11n(HT40)/ax(HEW40):7 Channel Spacing: 5MHz Antenna Type: FPC Antenna Antenna Gain: 2.71dBi Remark:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251100516404 Page: 5 of 12 Declaration of EUT Family Grouping: Model No.: E43xxy#/Q43xxy#/H43xxy#("x”=A-Z or 0-9,"y"= 0-9 or blank ,“#”=A-Z or 0-9), VI-43T232, HYT43…

Text truncated - open the document above for the full version.

AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page1of8 AntennaSpecifications CUSTOMER Goidproduct CSP/N R36-13Z465-000 MATERIALCODE IPEX/2.4G/L=400mm -WiFi JSP/N166-006-1A Checkedby(RF)Checkedby(ME)Checkedby(QA)Approvalledby CustomerApproval AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page2of8 1.GeneralDescription Thisdocumentprovidestheantennaspecificationsonelectric,mechanicandreliability. Thetestingconditionsandrelatedpicturesarealsoincluded. 1.1PrintAcceptance SamplesandAntennaSpecificationsaretobesenttocustomer.Whentheyareapproved, theapprovalformshouldbecompleted,signed,andsentbacktoJINGSONGbeforefurther massproductionbatchescanbedelivered. 1.2CoordinateSystem Thecoordinatesystemforthephoneisdefinedasfollows: Originincenterofgravity.  PositiveXaxisisperpendicularto,anddirectedfrom,frontplane. PositiveYaxisisperpendicularto,anddirectedfrom,rightsideplane(asseen fromfront).  PositiveZaxisisperpendicularto,anddirectedfrom,topplane. a)E0-planeb)E90-planec)Az-plane Figure1-1Thecoordinatesystemforthephone y x  y z x x y zz AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page3of8 2.Specifications Thisreportmainlyprovidesthetestingconditionsofvariouselectricandstructural performanceparametersforcellantenna----2.4G-WiFi.Figure2-1showsthe antennadesignedbyJS&Thefixturingof2.4G-WiFi 2-1： Specification SamplePhoto A.ElectricalCharacteristics Frequency 2400-2480MHz V.S.W.R. ≦1.5@2400-2480MHz PeakCain 2400~2480MHz；1.5dBi ± 0. 5dBi Polarization Linear lmpedance 50Ohm B.Material&MechanicalCharacteristics MaterialofRadiatorCarbonSteel MaterialofPlastic ABS CableType RF1.13 ConnectorType IPEXMale ConnectorPullTest ＞-3Kgf C.Environmental OperationTemperature -30°C~+85°C StorageTemperature -30°C~+85°C AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page4of8 3.WiFiantennatestdata Wifi:2.4Gefficiency/gain 3.12.4GApplechart AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page5of8 4.1SWR 5.1AntennaAssemblyDrawing AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page6of8 6.SpecificationsDrawings AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page7of8 7.EnvironmentalCharacteristic TestItemTestdescription 1.LowTemperature Temp.:-20°C Time:24hours 2.HighTemperature Temp.:80°C Time:24hours 3.SaltFog5±0.1%Nadsaltfog PHValue:6.5-7.2 Temp:35±1°C Time:24hours 8.CharacteristicsandReliabilityTest AntennaSpecifications ShenzhenJINGSONGTechnologyCo.,LTD ShenzhenJingsongTechnologyCo.,Ltd. •Address:AreaB,3rdFloor,Building1,WeijieScienceandTechnologyPark,No.118 HuaningRoad,DalangStreet,LonghuaDistrict,ShenzhenCity(neartheelevator) Tel：23744434Fax：23744434 page8of8 TestItems測 試項目 TestConditionandProcedure測試方法 Requirements要求 Result 結果 C1 V.S.W.R. 電壓駐波比 SetDUTonNetworkAnalyzer;makeindividual calibrationtotest設置網路分析儀參數進行測 試 DirectiveDUT specification符合待測 物規範 PASS C3 Antenna Gain天線 增益 SetDUTonAntennaChamber;makeindividual calibrationtotest設置天線暗室參數進行測試 DirectiveDUT specification符合待測 物規範 PASS M1 Vibration 震動 GB/T2423.48-2008Amplitude:0.03inch (1.5mm);Freq:20to80to20Hz3directions;2 hoursforeachdirection振幅1.5mm；頻率 20~80~20Hz；3個方向各2H 1.NoVisualDamage2. FrequencyTol.≤5%無明 顯外觀不良;頻率偏移≤ 5% PASS M4 PullTest 拉力 Holdingwithindividualspecification;force appliedtoaxisofConnector.單獨定義產品端子 拉力 1.DirectiveDUT specification2. FrequencyTol.≤5%符合 待測物規範;頻率偏移≤ 5% PASS M5 Magnetic force磁 力 Theseparatedefinitionofretentionproduct magneticsurfacemagnetsandadsorptionon theiron單獨定義產品磁鐵表面磁力及吸附鐵 板上保持力 1.DirectiveDUT specification2. FrequencyTol.≤5%符 合待測物規範;頻率偏 移≤5% PASS M6 Swaytest 搖擺測試 Holdingwithindividualspecification;theswing jointandwire,wireandplasticbodytest.單獨定 義接頭與線材、線材與塑膠本體的搖擺測試. 1.DirectiveDUT specification2. FrequencyTol.≤5%符 合待測物規範;頻率偏 移≤5% PASS M7 Dimensio n尺寸 Inspectionofdimension,color,material, package,surfaceprocess.检查尺寸,颜色,材料, 包装,表面處理 DirectiveDUT specification符合待測 物規範 PASS E2 SaltSpray 鹽霧 GB/T2423.17-2008Temp:35°C;RH:≥95%; NaClsolution:≥5%;Time:24H溫度35°C； 濕度≥95%;鹽水濃度≥5%；測試24H 1.NoVisualDamage2. FrequencyTol.≤5%無明 顯外觀不良;頻率偏移≤ 5% PASS E3 Temperat ureand Humidity Chamber 恒溫恒濕 GB/T2423.3-2006Temp:80°C/12H;-40°C/ 12HRH:≥90%;Time:24H溫度80°C測試 12H轉-40°C測試12H；濕度≥90%；時間24H After2HoursRecovery 1.NoVisualDamage2. FrequencyTol.≤5%恢復 2H后，無明顯外觀不良; 頻率偏移≤5% PASS E4 Thermal Shock 冷熱衝 擊 GB/T2423.22-2008-40°C(30minutes)to+80° C(30minutes)；Cycles:24 After2HoursRecovery 1.NoVisualDamage2. FrequencyTol.≤5% PASS

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR251100516402 Page: 1 of 64 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2511005164AT Applicant: Jinpin Electrical Company Ltd.ZhuHai.S.E.Z Address of Applicant: Building 4,No.55,Jinchuan Road,Hongqi Town, Jinwan District, Zhuhai, China Manufacturer: Jinpin Electrical Company Ltd. Zhuhai S.E.Z. Address of Manufacturer: Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District,Zhuhai, Guangdong,China Factory: Jinpin Electrical Company Ltd. Zhuhai S.E.Z. Address of Factory: Building 4,No.55,Jinchuan Road,Hongqi Town,Jinwan District,Zhuhai, Guangdong,China Equipment Under Test (EUT): EUT Name: LED TV Model No.: E43xxy#/Q43xxy#/H43xxy#("x”=A-Z or 0-9,"y"= 0-9 or blank ,“#”=A-Z or 0-9), VI-43T232, HYT43A1A01   Please refer to section 2 of this report which indicates wh…

Text truncated - open the document above for the full version.