2AAMWWP2268WIRELESS RED POINT PRESENTER

Shenzhen Vetac Technologies CO., Limited WIRELESS RED POINT PRESENTER User manual WP2268 It is a great tool for PowerPoint presentations. it contains two parts：a transmitter and a USB receiver. Features: 1. Easy carry, the transmitter and receiver are integrated into one unit for easy carry. 2. Advanced radio frequency (RF) technology that works through walls and the controlling distance is up to 10 meters /30 feet away, so you never have to stand at beside of your computer. 3. Easy to use, it is USB plug-and-play. No driver required. Just plug the receiver into the USB port on a PC and it works within seconds. 4. Multi-functional presenter It combines the function of a laser pointer, page up and page down for PowerPoint presentation. If you need flash memory, the receiver supports to be added built-in flash memory. Get start it: Battery installation: Push the battery cover switch on the side of presenter to forward, open the battery cover, and insert batter into the battery holder. USB receiver installation: Using: 1. Connect the USB to your PC. The flashing of LED indicates your connection is right.. 2. Press the button of page up or page down on the transmitter 1-2 seconds. The flashing of receiver’s LED indicates it is synchronization with transmitter. 3. There is a red laser shoot out when you press the laser button on transmitter. Technical parameters Components 1. Transmitter 2. Receiver 3. User manual Product details Warning To avoid possible eye damage, never point the presenter at people especially their faces, or look directly into the presenter’s laser beam. Avoid pointing the presenter’s laser beam at a mirror or other highly reflective surface. Keep the presenter away from children. Never view the presenter’s laser beam using telescopic devices, such as a microscope or binoculars. Any attempt to disassemble, adjust or repair the presenter may result in exposure to laser light or other safety hazards. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Test Lab Attestation Letter This attestation is to confirm that the below listed device was tested and report at our Test Facilities located at: Test Lab Name: NTEK Testing Technology Co., Ltd. Test Lab Address: 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’ an District, Shenzhen P.R. China Test Lab Registration Number: 238937 Date of Test: 1 Jul. 2013 ~5 Jul. 2013 Test Report Number: GTI‐2013DG0703115F Applicant Name: Shenzhen Vetac Technologies CO., Limited Product name: WIRELESS RED POINT PRESENTER Name of Engineer(s) Performing Test: Eric Wang TEST LABORATORY: Signature of Authorized Representative of the Test Laboratory: Full Contact Name:Bovey yang E‐[email protected] Position/Title:Manger

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Shenzhen Vetac Technologies CO., Limited 2013-7-3 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, _____ Shenzhen Vetac Technologies CO., Limited __ ___hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): Product description: WIRELESS RED POINT PRESENTER model name: WP2268 We affirm that between SIEMIC and ___ Shenzhen Vetac Technologies CO., Limited_ __, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Client’s name / title : Salina chen / mangaer Contact information / address : 4th Floor,22nd Block, Baotian 3rd Road,Xixiang,Baoan, Shenzhen, China

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Shenzhen Vetac Technologies CO., Limited 2013-7-3 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AAMWWP2268 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title : Salina chen / mangaer Contact information / address : 4th Floor,22nd Block, Baotian 3rd Road,Xixiang,Baoan, Shenzhen, China

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

WIRELESS RED POINT PRESENTER FCC ID: 2AAMWWP2268 Model Name：WP2268

Photo 7 Photo 8 Photo 9 Photo 10 Photo 11

FCC RADIO TEST REPORT FCC ID: 2AAMWWP2268 Product： WIRELESS RED POINT PRESENTER Trade Name： N/A Model Name： WP2268 Serial Model： N/A Report No.： GTI-2013DG0703115F Prepared for Shenzhen Vetac Technologies CO., Limited 4th Floor,22nd Block, Baotian 3rd Road,Xixiang,Baoan, Shenzhen, China Prepared by Shenzhen GTI Testing Technology Co., Ltd. 1/F, Building F, Fenda Science Park, Sanwei Community,Xixiang Street Bao’an District, Shenzhen P.R. China Page 2 of 27 Report No.: GTI-2013DG0703115F ` TEST RESULT CERTIFICATION Applicant’s name................. : Shenzhen Vetac Technologies CO., Limited Address ................................. : 4th Floor,22nd Block, Baotian 3rd Road,Xixiang,Baoan, Shenzhen, China Manufacture's Name............ : Shenzhen Vetac Technologies CO., Limited Address ................................. : 4th Floor,22nd Block, Baotian 3rd Road,Xixiang,Baoan, Shenzhen, China Product description Product name ........................... : WIRELESS RED POINT PRESENTER Model and/or type reference : WP2268 Serial Model： N/A Standards............................. : FCC Part15.231:2012 Test procedure .............................. ANSI C63.4-2003 This device described above has been tested by GTI, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of GTI, this document may be altered or revised by GTI, personal only, and shall be noted in the revision of the document. Date of Test............................................: Date (s) of performance of tests .............: 1 Jul. 2013 ~5 Jul. 2013 Date of Issue...........................................: 5 Jul. 2013 Test Result...............................................: Pass Testing Engineer : (Eric Wang) Technical Manager : (Jerry You) Authorized Signatory : (Jack yu) Page 3 of 27 Report No.: GTI-2013DG0703115F ` Table of Contents Page 1 . SUMMARY OF TEST RESULTS 4 1.1 TEST FACILITY 5 1.2 MEASUREMENT UNCERTAINTY 5 2 . GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 DESCRIPTION OF TEST MODES 7 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3 . ANTENNA REQUIREMENT 11 3.1 STANDARD REQUIREMENT 11 3.2 EUT ANTENNA 11 3.3 CONDUCTED EMISSION MEASUREMENT 12 3.3.1 POWER LINE CONDUCTED EMISSION LIMITS 12 3.3.2 TEST PROCEDURE 13 3.3.3 DEVIATION FROM TEST STANDARD 13 3.3.4 TEST SETUP 13 3.2.5 TEST RESULT 14 3.4 RADIATED EMISSION MEASUREMENT 15 3.4.1 RADIATED EMISSION LIMITS 15 3.4.2 TEST PROCEDURE 16 3.4.3 DEVIATION FROM TEST STANDARD 16 3.4.4 TEST SETUP 17 3.4.5 TEST RESULTS (BELOW 30MHZ) 19 3.4.6 TEST RESULTS (BETWEEN 30 – 1000 MHZ) 20 4 . BANDWIDTH TEST 24 4.1 TEST PROCEDURE 24 4.2 DEVIATION FROM STANDARD 24 4.3 TEST SETUP 24 4.4 TEST RESULTS 25 5 . TRANSMITTER TIMEOUT 26 5.1 REQUIREMENTS 26 6 . EUT TEST PHOTO 27 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 4 of 27 Report No.: GTI-2013DG0703115F ` 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.231) Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A Note(1) 15.203 Antenna Requirement Pass 15.231 Radiated Spurious Emission Pass 15.231 Occupied Bandwidth Pass 15.231 Transmitter Timeout Pass NOTE: (1) ” N/A” denotes test is not applicable in this Test Report. Page 5 of 27 Report No.: GTI-2013DG0703115F ` 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add. : 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.:238937; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 6 of 27 Report No.: GTI-2013DG0703115F ` 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment WIRELESS RED POINT PRESENTER Trade Name N/A Model Name WP2268 Serial Model N/A Model Difference N/A Product Description The EUT is a WIRELESS RED POINT PRESENTER Product Type Remote Control Operation Frequency: 315MHz Modulation Type: ASK Number Of Channel 1CH. Antenna Designation: Printed antenna Antenna Gain(Peak) 0 dBi Output Power: 69.3 dBuV/m (AV Max.) Channel List N/A Adapter N/A Battery DC 12V Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Table for Filed Antenna Ant . Brand Model Name Antenna Type Connector Gain (dBi) NOTE 1 N/A N/A PCB Antenna NA 0 Antenna Page 7 of 27 Report No.: GTI-2013DG0703115F ` 2.2 DESCRIPTION OF TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively. Pretest Mode Description Mode 1 TX For Conducted Emission Final Test Mode Description Mode 1 N/A For Radiated Emission Final Test Mode Description Mode 1 TX Page 8 of 27 Report No.: GTI-2013DG0703115F ` 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED Radiated Spurious Emission Test E-1 EUT Page 9 of 27 Report No.: GTI-2013DG0703115F ` 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) The EUT has been tested as an independent unit together with other necessary accessories or support units. …

Text truncated - open the document above for the full version.

Page 26 of 26 Report No.: GTI-2013DG0703115F ` 6. EUT TEST PHOTO Radiated Measurement Photos