2AANU-HTL3110SOUNDBAR SPEAKER

www.philips.com/welcome User manual Always there to help you Register your product and get support at Question? Contact Philips 1EN Contents 1 Important 2 Help and support 2 Important safety instructions 2 Care for your product 4 Care of the environment 4 2 Your SoundBar 5 Main unit 5 Remote control 5 Connectors 6 Wireless subwoofer 6 3 Connect and set up 8 Pair up with the subwoofer 8 Placement 8 Connect to TV 8 Connect audio from TV and other devices 9 4 Use your SoundBar 11 Adjust the volume 11 Choose your sound 11 Play audio through Bluetooth 11 Play music via NFC 12 USB storage devices 13 Auto standby 13 Set display brightness 13 Apply factory settings 13 5 Update software 14 Check software version 14 Update software via USB 14 6 Wall mount 15 7 Product specifications 16 8 Troubleshooting 17 9 Notice 19 Notice of compliance 19 23ENEN • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Remove batteries when the unit is not used for a long time. • The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. • Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. • The product/remote control may contain a coin/button type battery, which can be swallowed. Keep the battery out of reach of children at all times! If swallowed, the battery can cause serious injury or death. Severe internal burns can occur within two hours of ingestion. • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. • When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. • If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. •Apparatus shall not be exposed to dripping or splashing. •Do not place any sources of danger on the apparatus (for example. liquid filled objects, lighted candles). •This apparatus may contain lead and mercury. Dispose according to local, State or Federal laws. For disposal or recycling information, please contact your local authorities. For additional assistance on recycling options, please contact www. mygreenelectronics.com or www.eiae.org or www.recycle.philips.com. •Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. •Do not place this apparatus on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling apparatus can cause serious injury or even death. • This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 7.8 inches (20cm) or more around this apparatus. Class II equipment symbol This symbol indicates that the unit has a double insulation system. This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. 1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips. com/support to: • download the user manual and the quick start guide • watch video tutorials (available only for selected models) • find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product. Important safety instructions •Read these instructions. •Keep these instructions. •Heed all warnings. •Follow all instructions. •Do not use this apparatus near water. •Clean only with dry cloth. •Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. •Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. •Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. •Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. •Only use attachments/accessories specified by the manufacturer. •Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. •Unplug this apparatus during lightning storm or when unused for long periods of time. •Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such …

Text truncated - open the document above for the full version.

RF_160, I ssue 02 Declaration of Authorization We Name: WOOX Innovations Limited Address: 5/F Philips Electronics Building, 5 Science Park East Ave, HK Science Park City: Shatin, NT Country: Hong Kong Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s), including the signing of the related documents such as 731 forms: Product description: SOUNDBAR SPEAKER Model: HTL3110B/F7；HTL31X0X/F7(the “X” can be blank or can be”0” to “9”or ”A” to “Z” for market use only Trademark: PHILIPS on our behalf. Date: 2014-1-27 City: Shatin, NT Name: Benson Lai Function: Lead Engineer, Safety and Compliance Signature: ...............................

FCC, Request for non-disclosure Date: 10-AUG-09 RF_501, Issue 5 Page 1 of 1 Company Name: WOOX Innovations Limited Address: 5/F Philips Electronics Building,5 Science Park East Ave, HK Science Park City: Shatin, NT Country: Hong Kong To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: 2AANU-HTL3110 Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of thi s company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2014-1-2 7 Name and signature of applicant: Benson Lai Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Neutron Engineering Inc. Project No.: 1312C260 Page 2 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 3 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 4 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 5 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 6 of 19

Rating label Model : HTL2153B/F7 Serial No.: PT1A1349000001 December,2013 Model : HTL2153B/F7 D C 21.0V 3.09A CAN ICES(B)/NMB-3(B) Rating label IC : 11260A-HTL2163 FCC ID: 2AANU-HTL2163 December,2013 Model : HTL2163B/F7 Model : HTL2163B/F7 Serial No.: PT1A1349000001 CAN ICES(B)/NMB-3(B) D C 21.0V 3.09A IC : 11260A-HTL2163 FCC ID: 2AANU-HTL2163 December,2013 Model : HTL2163B/F7 Model : HTL2163B/F7 Serial No.: PT1A1349000001 CAN ICES(B)/NMB-3(B) D C 21.0V 3.09A Model : HTL3110B/F7 January,2014 Model : HTL3110B/F7 Serial No.: PT1A1349000001 CAN ICES(B)/NMB-3(B) D C 21.0V 3.09A IC : 11260A-HTL3110 FCC ID: 2AANU-HTL3110 PT1A1349000001 Model No. : HTL3140B/12 WOOX Innovations NL5616LZ-400-SFH4 D C 21.0V 3.09A HTL3140B/12 Model : HTL3110B/F7 January,2014 Model : HTL3110B/F7 Serial No.: PT1A1349000001 CAN ICES(B)/NMB-3(B) D C 21.0V 3.09A IC : 11260A-HTL3110 FCC ID: 2AANU-HTL3110 PT1A1349000001 Model No. : HTL3140B/12 WOOX Innovations NL5616LZ-400-SFH4 D C 21.0V 3.09A HTL3140B/12 ODEHOORFDWLRQ

Neutron Engineering Inc. Project No.: 1312C260 Page 7 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 8 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 9 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 10 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 11 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 12 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 13 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 14 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 15 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 16 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 17 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 18 of 19 Neutron Engineering Inc. Project No.: 1312C260 Page 19 of 19

Neutron Engineering Inc. Report No.: NEI-FICP-2-1312C260 Page 1 of 50 FCC&IC Radio Test Report FCC ID: 2AANU-HTL3110 IC: 11260A-HTL3110 This report concerns (check one): Original Grant Class II Change Issued Date : Jan. 17, 2014 Project No. : 1312C260 Equipment : SOUNDBAR SPEAKER Model Name For FCC : HTL3110B/F7; HTL31X0X/F7(the “X” can be blank or can be”0” to “9”or ”A” to “Z” for market use only) Model Name For IC : HTL3110B/F7 Applicant : WOOX Innovations Limited Address : 5/F Philips Electronics Building,5 Science Park East Ave, HK Science Park Shatin, NT Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Jan. 08, 2014 Date of Test: Jan. 08, 2014~ Jan. 16, 2014 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory: (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-2-1312C260 Page 2 of 50 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-2-1312C260 Page 3 of 50 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 TEST PROCEDURE 13 4.1.3 DEVIATION FROM TEST STANDARD 13 4.1.4 TEST SETUP 14 4.1.5 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 14 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 TEST PROCEDURE 18 4.2.3 DEVIATION FROM TEST STANDARD 18 4.2.4 TEST SETUP 19 4.2.5 EUT OPERATING CONDITIONS 20 4.2.6 EUT TEST CONDITIONS 20 4.2.7 TEST RESULTS (BELOW 30MHz) 21 4.2.8 TEST RESULTS (BETWEEN 30 – 1000 MHz) 22 4.2.9 TEST RESULTS (ABOVE 1000 MHz) 29 5 . BANDWIDTH TEST 37 5.1 TEST PROCEDURE 37 5.2 DEVIATION FROM STANDARD 37 5.3 TEST SETUP 37 5.4 EUT OPERATION CONDITIONS 37 5.5 EUT TEST CONDITIONS 37 5.6 TEST RESULTS 38 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 40 6.1 APPLIED PROCEDURES / LIMIT 40 6.1.1 TEST PROCEDURE 40 Neutron Engineering Inc. Report No.: NEI-FICP-2-1312C260 Page 4 of 50 Table of Contents Page 6.1.2 DEVIATION FROM STANDARD 40 6.1.3 TEST SETUP 40 6.1.4 EUT OPERATION CONDITIONS 41 6.1.5 EUT TEST CONDITIONS 41 6.1.6 TEST RESULTS 42 7 . MEASUREMENT INSTRUMENTS LIST AND SETTING 46 8 . EUT TEST PHOTO 47 Neutron Engineering Inc. Report No.: NEI-FICP-2-1312C260 Page 5 of 50 1. CERTIFICATION Equipment : SOUNDBAR SPEAKER Brand Name : PHILIPS Model Name For FCC : HTL3110B/F7; HTL31X0X/F7(the “X” can be blank or can be”0” to “9”or ”A” to “Z” for market use only) Model Name For IC : HTL3110B/F7 Applicant : WOOX Innovations Limited Manufacturer : WOOX Innovations Limited Address : 5/F Philips Electronics Building,5 Science Park East Ave, HK Science Park Shatin, NT Hong Kong Factory : 1) Eastech Electronics ( Hui Yang ) Co. Ltd. 2) Dixon Technologies (India) Pvt. Ltd. 3) Philips do Brasil Ltda 4) Fabrica Austral de Productos Electricos Socledad Anonima 5) Jasz - Plasztik Ltd 6) SKH plastic. spol. s.r.o 7) Woox Innovations Address : 1)Dong Feng District Xinxu, Hui Yang, Hui Zhou,Guangdong,P.R.China 2) Khasara no. 992 / 2 , Central Hope Town , Industrial Area , Selaqui , Dehardun , Uttaranchal, India. 3) Avenue Torquato Tapajos 2236,Flores Cep 67048-0660 Manaus-Amazonas,BRAZIL 4) Islas Malvinas 1180,CP 9240.Rio Grande,Tierra del Fuego ,ARGENTINA . 5) H-5100 Jászberény, Necs telep 1. Jászberény, Hungary 6) Matúškovo 1586, Galanta, Slovakia 7) Avenida Torquato Tapajós, 7503 Tarumã - CEP 69041-025, Manaus - Amazonas Date of Test : Jan. 08, 2014~ Jan. 16, 2014 Test Sample : Engineering Sample Standard(s) : FCC Part15, Subpart C(15.249)/ ANSI C63.4-2009 Canada RSS-210:2010 RSS-GEN Issue 3, Dec 2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-2-1312C260) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-2-1312C260 Page 6 of 50 2. SUMMARY OF TEST RESULTS…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1312C260 Page 91 of 94 12. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1312C260 Page 92 of 94 Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1312C260 Page 93 of 94 Radiated Measurement Photos 30~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1312C260 Page 94 of 94 Radiated Measurement Photos Above 1000MHz