2AANUBT50Wireless Portable Speaker

www.philips.com/support User manual Always there to help you Register your product and get support at Question? Contact Philips 1EN Contents 1 Important 2 Important safety instructions 2 2 Your portable speaker 3 Introduction 3 What's in the box 3 Overview of the speaker 3 3 Get started 4 Charge the built-in battery 4 Turn on/off 4 4 Play from Bluetooth devices 5 Connect a device 5 Disconnect a device 5 Reconnect a device 6 5 Play from external devices 7 6 Product information 8  Speaker 8 Bluetooth 8 General information 8 7 Troubleshooting 9 General 9 About Bluetooth device 9 8 Notice 10 Care of the environment 10 Trademark notice 11 2EN 1 Important Warning Never remove the casing of this speaker. Never lubricate any part of this speaker. Never place this speaker on other electrical equipment. Keep this speaker away from direct sunlight, naked    Important safety instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or          produce heat. i Only use attachments/accessories     j         personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. k Battery shall not be exposed to excessive        l Apparatus shall not be exposed to dripping or splashing. m Do not place any sources of danger on           Note The type plate is located on the bottom of the apparatus. 3EN 2 Your portable speaker Congratulations on your purchase, and          support that Philips offers, register your product at www.philips.com/welcome. Introduction With this speaker, you can enjoy audio from Bluetooth-enabled devices or other external devices. What's in the box Check and identify the contents of your package: Speaker USB cable for charging Short user manual Overview of the speaker a LED indicator abcde Indicate battery or Bluetooth connection status. b Source selector (OFF/AUDIO IN/  Select Bluetooth or AUDIO IN source. Turn the speaker off. c PAIRING Enter Bluetooth pairing mode. Disconnect Bluetooth connection. d DC IN Recharge the built-in battery. e AUDIO IN Connect an external audio device. 4EN 3 Get started Always follow the instructions in this chapter in sequence. Charge the built-in battery The speaker is powered by a built-in rechargeable battery. Note Before use, fully charge the built-in battery. The micro USB socket is for charging only. It takes you approximately two hours to fully charge the battery. Rechargeable battery has a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. Connect the USB cable between the DC IN socket on the speaker, and a USB socket on a computer. The LED indicator indicates the battery status. Under chargingFully charged " OFF " mode Flashing whiteOff " AUDIO IN " mode Flashing whiteSolid white " Bluetooth " mode Flashing blue or solid blue (depending on Bluetooth connection status) Flashing blue or solid blue (depending on Bluetooth connection status) Turn on/off To turn the speaker on, slide the source selector to AUDIO IN or . To turn the speaker off, slide the source selector to OFF. Switch to standby mode The speaker switches to standby mode automatically in the following situations: In Bluetooth mode, the connection with Bluetooth device is invalid for 15 minutes; or In AUDIO IN mode, no audio input cable is connected for 15 minutes. 5EN 4 Play from Bluetooth devices With this speaker, you can listen to audio from Bluetooth-enabled devices. Note The speaker can memorize a maximum of four paired             Any obstacle between this speaker and a Bluetooth device can reduce the operational range. Keep away from any other electronic device that may cause interference. The operational range between this speaker and a Bluetooth device is approximately 10 meters (30 feet). Make sure that no audio input cable is connected to the AUDIO IN socket. Connect a device 1 Slide the source selector to . » !#$    2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). 3 Select [Philips BT50] displayed on your device for pairing and connection. If necessary, input “0000” as the pairing password. » After successful pairing and connection, the speaker beeps twice, and the LED indicator turns solid blue. %    [Philips BT50] on your device, press and hold PAIRING for more than three seconds until you hear triple beeps. 4 Play audio on the Bluetooth device. Tip You can use your Bluetooth device to control play. !"#     IndicatorBluetooth connection status Fast & (2Hz) Pairing Slow & (1Hz) Connecting Solid blueConnected Disconnect a device Press and hold PAIRING for more than three seconds; »The speaker beeps for three times. Disable Bluetooth on your device; or Move the device beyond the communication range. »The speaker beeps twice, and the LED    6EN Note Before connecting another Bluetooth device, disconnect       Reconnect a device When you turn on the speaker, it will reconnect the last connected device automatically; If not, select [Philips BT50] on your Bluetooth device to start connection. 7EN 5 Play from external devices With this speaker, you can also listen to an external audio device s…

Text truncated - open the document above for the full version.

FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCC Rules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.This equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe instructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnot occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbe determinedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe followingmeasures: —Reorientorrelocatethereceivingantenna. —Increasetheseparationbetweentheequipmentandreceiver. —Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. —Consultthedealeroranexperiencedradio/TVtechnicianforhelp. IC Statement This device complies with Industry Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3(B)/NMB-3(B) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doitétre prêtà accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fomctionnement du dispositif. CAN ICES-3(B)/NMB-3(B)The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformitéà l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cetémetteur ne doit pasêtre Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur. Cetéquipement devraitêtre installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et votre corps.

WOOX Innovations Limited Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Gentlemen: This letter is to comply with Sections 0.457 and 0.459 pertaining to confidential material.WOOX Innovations Limited would like the following documents regarding this submission for FCC ID: 2AANUBT50 to be kept confidential. 1.Schematics. 2.Block diagram, 3.Operation description The above material contains trade secrets or technical data, which would customarily be guarded from competitors. We do not want these documents to be accessible to the general public. Sincerely, Date: 2015-02-09

WOOX Innovations Limited DATE: 2015-02-09 To whom it may concern: We the undersigned, hereby authorize EMCCert DR. RAŠEK GmbH and BTL Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by EMCCert DR. RAŠEK GmbH and BTL Inc. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from WOOX Innovations Limited. Sincerely, (Name and Title) Benson Lai , Manager

Model Declaration Letter We, the undersigning company Company Name: WOOX Innovations Limited Address: 5/F Philips Electronics Building,5 Science Park East Ave, HK Science Park, Shatin, NT, Hong Kong Hereby confirm that the following products: Product description: Wireless Portable Speaker Type designation: BT50B/37; BT50A/37; BT50G/37; BT50L/37; BT50W/37 Trademark: PHILIPS That All versions of the Model BT50B/37,BT50A/37,BT50G/37,BT50L/37 and BT50W/37 are electrically equal and only differs in model name.

Project No.: 1412C038A Page 2 of 14 Project No.: 1412C038A Page 3 of 14

Project No.: 1412C038A Page 4 of 14 Project No.: 1412C038A Page 5 of 14 Project No.: 1412C038A Page 6 of 14 Project No.: 1412C038A Page 7 of 14 Project No.: 1412C038A Page 8 of 14 Project No.: 1412C038A Page 9 of 14 Project No.: 1412C038A Page 10 of 14 Project No.: 1412C038A Page 11 of 14 Project No.: 1412C038A Page 12 of 14 Project No.: 1412C038A Page 13 of 14 Project No.: 1412C038A Page 14 of 14

FCC RF EXPOSURE REPORT FCC ID: 2AANUBT50 Project No. : 1412C038A Equipment : Wireless Portable Speaker Model : BT50B/37; BT50A/37; BT50G/37; BT50L/37; BT50W/37 Applicant : WOOX Innovations Ltd. Address : 5/F-6/F, Philips Electronics Building, 5 Science Park East Avenue,Hong Kong Science Park, Shatin, New Territories,HongKong According: : FCC Guidelines for Human Exposure IEEE C95.1 BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector Gain(dBi) 1 N/A N/A Printed N/A 0 TEST RESULTS EUT： Wireless Portable Speaker Model Name : BT50B/37 Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX Mode _1Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 0 1.0000 -1.04 0.7870 0.000156661 Complies 0 1.0000 -2.1 0.6166 0.000122731 Complies 0 1.0000 -3.14 0.4853 0.000096591 Complies EUT： Wireless Portable Speaker Model Name : BT50B/37 Temperature： 25 °C Relative Humidity: 55 % Test Voltage : AC 120V/60Hz Test Mode ： TX Mode _3Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 0 1.0000 -1.04 0.7870 0.000156661 Complies 0 1.0000 -2.1 0.6166 0.000122731 Complies 0 1.0000 -3.14 0.4853 0.000096591 Complies Note: the calculated distance is 20 cm.

Report No.: BTL-FICP-1-1412C038A Page 1 of 109 FCC&IC Radio Test Report FCC ID: 2AANUBT50 IC: 11260A-BT50 This report concerns (check one): Original Grant Class II Change Project No. : 1412C038A Equipment : Wireless Portable Speaker Model Name : BT50B/37; BT50A/37; BT50G/37; BT50L/37; BT50W/37 Applicant : WOOX Innovations Ltd. Address : 5/F-6/F, Philips Electronics Building, 5 Science Park East Avenue,Hong Kong Science Park, Shatin, New Territories,HongKong Date of Receipt : Jan. 28, 2015 Date of Test : Jan. 28, 2015~ Feb. 05, 2015 Issued Date : Feb. 06, 2015 Tested by : BTL Inc. Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) BTL INC. No.3, Jinshagang 1st Road, Shixia, Dalang Town, Dongguan, Guangdong, China. TEL: +86-769-8318-3000 FAX: +86-769-8319-6000 Report No.: BTL-FICP-1-1412C038A Page 2 of 109 Declaration BTL represents to the client that testing is done i n accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s ) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FICP-1-1412C038A Page 3 of 109 Table of Contents Page 1 . CERTIFICATION 7 2 . SUMMARY OF TEST RESULTS 8 2.1 TEST FACILITY 9 2.2 MEASUREMENT UNCERTAINTY 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 TEST PROCEDURE 14 4.1.3 DEVIATION FROM TEST STANDARD 14 4.1.4 TEST SETUP 15 4.1.5 EUT OPERATING CONDITIONS 15 4.1.6 EUT TEST CONDITIONS 15 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 18 4.2.5 EUT OPERATING CONDITIONS 19 4.2.6 EUT TEST CONDITIONS 19 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 19 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 20 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 20 5 . NUMBER OF HOPPING CHANNEL 21 5.1 APPLIED PROCEDURES 21 5.1.1 TEST PROCEDURE 21 5.1.2 DEVIATION FROM STANDARD 21 5.1.3 TEST SETUP 21 5.1.4 EUT OPERATION CONDITIONS 21 5.1.5 EUT TEST CONDITIONS 21 5.1.6 TEST RESULTS 21 Report No.: BTL-FICP-1-1412C038A Page 4 of 109 Table of Contents Page 6 . AVERAGE TIME OF OCCUPANCY 22 6.1 APPLIED PROCEDURES / LIMIT 22 6.1.1 TEST PROCEDURE 22 6.1.2 DEVIATION FROM STANDARD 22 6.1.3 TEST SETUP 22 6.1.4 EUT OPERATION CONDITIONS 23 6.1.5 EUT TEST CONDITIONS 23 6.1.6 TEST RESULTS 23 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 24 7.1 APPLIED PROCEDURES / LIMIT 24 7.1.1 TEST PROCEDURE 24 7.1.2 DEVIATION FROM STANDARD 24 7.1.3 TEST SETUP 24 7.1.4 EUT TEST CONDITIONS 24 7.1.5 TEST RESULTS 24 8 . BANDWIDTH TEST 25 8.1 APPLIED PROCEDURES 25 8.1.1 TEST PROCEDURE 25 8.1.2 DEVIATION FROM STANDARD 25 8.1.3 TEST SETUP 25 8.1.4 EUT OPERATION CONDITIONS 25 8.1.5 EUT TEST CONDITIONS 25 8.1.6 TEST RESULTS 25 9 . PEAK OUTPUT POWER TEST 26 9.1 APPLIED PROCEDURES / LIMIT 26 9.1.1 TEST PROCEDURE 26 9.1.2 DEVIATION FROM STANDARD 26 9.1.3 TEST SETUP 26 9.1.4 EUT OPERATION CONDITIONS 26 9.1.5 EUT TEST CONDITIONS 26 9.1.6 TEST RESULTS 26 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 27 10.1 APPLIED PROCEDURES / LIMIT 27 10.1.1 TEST PROCEDURE 27 10.1.2 DEVIATION FROM STANDARD 27 10.1.3 TEST SETUP 27 10.1.4 EUT OPERATION CONDITIONS 27 10.1.5 EUT TEST CONDITIONS 27 10.1.6 TEST RESULTS 27 11 . MEASUREMENT INSTRUMENTS LIST 28 Report No.: BTL-FICP-1-1412C038A Page 5 of 109 Table of Contents Page 12 . EUT TEST PHOTO 30 ATTACHMENT A - CONDUCTED EMISSION 34 ATTACHMENT B - RADIATED EMISSION (9KHZ-30MHZ) 37 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 39 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 46 ATTACHMENT E - NUMBER OF HOPPING CHANNEL 71 ATTACHMENT F - AVERAGE TIME OF OCCUPANCY 73 ATTACHMENT G - HOPPING CHANNEL SEPARATION MEASUREMENT 86 ATTACHMENT H - BANDWIDTH 91 ATTACHMENT I - PEAK OUTPUT POWER 96 ATTACHMENT J - ANTENNA CONDUCTED SPURIOUS EMISSION 101 Report No.: BTL-FICP-1-1412C038A Page 6 of 109 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FICP-1-1412C038A Original Issue. Feb. 06, 2015 Report No.: BTL-FICP-1-1412C038A Page 7 of 109 1. CERTIFICATION Equipment : Wireless Portable Speaker Brand Name : PHILIPS Model Name : BT50B/37; BT50A/37; BT50G/37; BT50L/37; BT50W/37 Applicant WOOX Innovations Ltd. Manufacturer : WOOX Innovations Ltd. Address : 5/F-6/F, Philips Electronics Building, 5 Science Park East Avenue,Hong Kong Science Park, Shatin, New Territories,HongKong Factory : Zhejiang Luckyfaith Digital Technology Co., Ltd Address : No. 188, Zheduan Road, Pukou District, Economic …

Text truncated - open the document above for the full version.

Report No.: BTL-FICP-1-1412C038A Page 30 of 109 12. EUT TEST PHOTO Conducted Measurement Photos Report No.: BTL-FICP-1-1412C038A Page 31 of 109 Radiated Measurement Photos 9KHz to 30MHz Report No.: BTL-FICP-1-1412C038A Page 32 of 109 Radiated Measurement Photos 30MHz to 1000MHz Report No.: BTL-FICP-1-1412C038A Page 33 of 109 Radiated Measurement Photos Above 1000MHz