2AANUSB365Wireless portable sperker

www.philips.com/welcomeAlways there to help you Register your product and get support at Question? Contact Philips Question? Contact Philips SB365 EN Short User Manual ES Manual de usuario corto FR Bref mode d’emploi 2014 © WOOX Innovations Limited. All rights reserved.This product was brought to the market by WOOX                             manufacturer of the product. P&F is the warrantor in relation to the product with which this booklet was packaged. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.SB365_37_Short User Manual_V1.0 P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248 Phone 1 866 309 0845 Meet Philips at the Internet http://www.philips.com/welcome Register online at www.philips.com/welcome today to get the very most from your purchase. For Customer Use Enter below the Serial No. which is locat-ed on the rear of the cabinet. Retain thisinformation for future reference.Model No.__________________________Serial No. ________________________ This “bolt of lightning” indicates unin- sulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls atten- tion to features for which you should read the enclosed literature closely to pre- vent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.ATTENTION : Pour éviter les choc élec- triques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond. Congratulations on your purchase,and welcome to the “family!” Dear PHILIPS product owner: P.S. To get the most from your PHILIPS purchase, be sure to register online at: www.philips.com/welcome Register online at www.philips.com/welcome to ensure: *Avis sur la sécurité des prod En enregistrant votre produit, vous serez avisé - directement par le fabriquant. rez de tous les privilèges auxquels vous avez droit y compris des offres-rabais spéciales. Nous vous félicitons de votre achat et vous souhaitons la bienvenue dans la « famille »! Cher propriétaire d’un produit PHILIPS : de fabrication et de garantie supérieures parmi les meilleurs disponibles sur le marché. Et nous ferons tout en notre pouvoir pour que vous soyez pleinement satisfait de votre achat pour des années à venir.En tant que membre de la « famille » PHILIPS, vous avez droit à une protection inégalée par l’une des garanties les plus complètes de l’industrie.De plus, votre achat garantit que vous recevrez toutes les informations et offres spéciales auxquelles vous avez droit, ainsi qu’un accès facile à toute une gamme d’accessoires disponibles via notre réseau de téléachat.Mais ce qui est encore plus important, vous pouvez compter sur notre engagement total quand il s’agit de votre entière satisfaction. C’est notre façon de vous souhaiter la bienvenue et de vous remercier de votre investissement dans un produit PHILIPS. PHILIPS, assurez-vous de vous enregistrez en ligne à www.philips.com/welcome À l’usage du client Entrez ci-dessous le numéro de série qui se trou- ve à l’arrière du boîtier du dispositif. Conservez ces informations pour référence ultérieure. No. de modèle : ________________________No. de série : __________________________ Ce symbole « d’éclair » s’applique auxmatériaux non isolés présents dans votre appareil et pouvant causer un choc électrique.Pour assurer la sécurité des membres de votrefamille, veuillez ne pas enlever le couvercle devotre produit. Les « points d’exclamation » ont pourbut d’attirer votre attention sur des carac- téristiques à propos desquelles vous devez liresoigneusement la documentation accompagnantl’appareil afin d’éviter tout problème d’exploita-tion ou d’entretien.AVERTISSEMENT : Afin de réduire les risques d’incendie ou de choc électrique, ne pas exposercet appareil à la pluie ou à l’humidité et les objets remplis de liquide, comme les vases, ne doiventpas être placés sur le dessus de l’appareil.CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.ATTENTION : Pour éviter les chocs élec- triques, introduire la lame la plus large de la fichedans la borne correspondante de la prise etpousser à fond. AVIS P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248 EN 1 ImportantSafety Warning  Never remove the casing of this speaker.  Never lubricate any part of this speaker.  Never place this speaker on other electrical equipment.                  Important safety instructionsa Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h                                    ! i "   #    $  #%                    #    '    ! j     (     $   ! k Unplug this apparatus during lightning storms or when unused for long periods of time. l )      *      ! +    *  #     $       #   *  $     $8            $  '                $   ! FR m Utilisation des piles ATTENTION – Pour éviter les fuites de piles pouvant endommager l’appareil ou entraîner des blessures corporelles ou d…

Text truncated - open the document above for the full version.

TO WHOM IT MAY CONCERN DECLARATION OF IDENTITY Model Number: SB365/zz (zz = 07, 17 or 37) Brand Name: PHILIPS Product Name: Wireless Portable Speaker Declare the Circuit, PCB Layout, Electrical Parts and Outlook of the following product(s) are identical to all models: New / Additional Model Number(s): SB365/zz consist of three stroke version 07, 17 and 37 to represent the country code. All the models are identical except the model no. Signature with Company Chop : Printed Name : Benson Lai DATE: 17/Jan/2014 Page 1 of 1

Request for Confidentiality Date: 2014-01-16 Subject: Confidentiality Request for: __FCC ID: 2AANUSB365_____ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ WOOX Innovations Limited ______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: __________________________ ___Benson Lai/ Lead Engineer____ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-B ut-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 – 6

Authority to Act as Agent Date: 2014-01-16 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: __SGS-CSTC Standards Technical Services Co., Ltd.__ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: 16-April-2014 By: __________________________ ___ Benson Lai ______ (Signature 1 ) (Print name) Tit le: ________Lead Engineer________ On behalf of: __ WOOX Innovations Limited ___ (Company Name) Telephone: ____852-3468 3267___ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 022311 – 6

External Photos:

SB365/37 Label Location

Internal Photos:

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM130300092101 Page: 1 of 79 IC: 3784A-CPLA40A Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1303000921RF Applicant: Corning Mobile Access Inc. IC: 3784A-CPLA40A Product Name: GX High Power DAS Remote Unit Model No.: GX-C85P19L70A17-40,GX-C85P19L70A17-40-DC ♣ ♣ Please refer to section 7.3 of this report for details Trade Mark: GX Standards: RSS-131 Issue 3: July 2003; RSS-Gen Issue 3: December 2010 Date of Receipt: 2013-03-13 and 2014-02-20 Date of Test: 2013-03-13 to 2014-02-14 Date of Issue: 2014-02-17 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further details. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM130300092101 Page: 2 of 79 IC: 3784A-CPLA40A This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-02-17 Original Authorized for issue by: Tested By 2013-03-13 to 2014-02-14 (Daniel Hew) /Project Engineer Date Prepared By 2014-02-17 (Daniel Hew) /Clerk Date Checked By 2014-02-17 (Jeffrey Chen) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM130300092101 Page: 3 of 79 IC: 3784A-CPLA40A This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Item Test Requirement Test Method Result Amplifier Gain and Bandwidth RSS-131 clause 6.1 RSS-131 clause 4.2 PASS Output Power RSS-131 clause 6.2 RSS-131 clause 4.3.1 PASS Non-Linearity RSS-131 clause 6.3.1 RSS-131 clause 4.3.1 PASS Conducted…

Text truncated - open the document above for the full version.

Test Setup Photos: Radiated Spurious Emission Test Setup Below 1G: Adapter 1#: Adapter 2#: Test Setup Photos: Radiated Spurious Emission Test Setup Above 1 GHz: Adapter 1#: Adapter 2#: Conducted Emission Test Setup Adapter 1#: Adapter 2#: