2AANZTWWLCharging Lamp

Radiation Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Jan. 26, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2AANZTWWL DGL Group LTD. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Amy Chao Title: N/A Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Tel.: 001-732-692-5180 Email: [email protected]

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Jan. 26, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2AANZTWWL Product Name: Charging Lamp This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Amy Chao Title: N/A Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Tel.: 001-732-692-5180 Email: [email protected] DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States FCC ID: 2AANZTWWL 2.911(d)(7) USA Designated Agent for Service of Process We, [DGL Group LTD.] (“the applicant”) designate [DGL Group LTD.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: DGL Group LTD. USA Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey 08817, United States FRN Number: 0024048670 Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: [email protected] Applicant Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Grantee FRN Number: 0024048670 FCC Grantee Code: 2AANZ Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: [email protected] DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States 2.911 (d)(7)USA Agent v1.5 Signature: Title: Signature: Title: Date: 2026-1-11 Date: 2026-1-11 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Date: 2026/1/26 Dear Sir/Madam, We, DGL Group LTD., Hereby declares the following statement, the color of the appearance of the model is different, and the internal circuitry is completely consistent for these model: Product name: Charging Lamp FCC ID: 2AANZTWWL Model no.: SUN-TWWL-BLK, SUN-TWWL, SUN-TWWL-XXX Sincerely, Name/Title： Amy Chao / N/A Company: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Phone: 001-732-692-5180 Fax: 001-732-692-5000 E-Mail: [email protected]

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States January 26, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AANZTWWL Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, Title: N/A Address: 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Tel.: 001-732-692-5180 Email: [email protected]

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States January 26, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AANZTWWL I, the undersigned, hereby authorize Shenzhen Tongzhou Testing Co.,Ltd. to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by Shenzhen Tongzhou Testing Co.,Ltd. shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with DGL Group LTD.. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Amy Chao N/A Tel: 001-732-692-5180 Fax: 001-732-692-5000 Email: [email protected]

Report No.: TZ0035250941PH02 Page 1 of 4 External Photographs of EUT External Photo 1 External Photo 2 Report No.: TZ0035250941PH02 Page 2 of 4 External Photo 3 External Photo 4 Report No.: TZ0035250941PH02 Page 3 of 4 External Photo 5 External Photo 6 Report No.: TZ0035250941PH02 Page 4 of 4 External Photo 7

The size of the label is 30mm*25mm with White forecolor. The size of the logo is 5mm*5mm. Label Location FCC ID: 2AANZTWWL

Report No.: TZ0035250941PH03 Page 1 of 7 Internal Photographs of EUT Internal Photo 1 Internal Photo 2 Report No.: TZ0035250941PH03 Page 2 of 7 Internal Photo 3 Internal Photo 4 Report No.: TZ0035250941PH03 Page 3 of 7 Internal Photo 5 Internal Photo 6 Report No.: TZ0035250941PH03 Page 4 of 7 Internal Photo 7 Internal Photo 8 Report No.: TZ0035250941PH03 Page 5 of 7 Internal Photo 9 Internal Photo 10 Report No.: TZ0035250941PH03 Page 6 of 7 Internal Photo 11 Internal Photo 12 Report No.: TZ0035250941PH03 Page 7 of 7 Internal Photo 13

Report No.: TZ0035250941FRF15 Page 1 of 14 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. RF Exposure Report Report Number : TZ0035250941FRF15 Product Name : Charging Lamp Model/Type reference : SUN-TWWL-BLK, SUN-TWWL, SUN-TWWL-XXX FCC ID : 2AANZTWWL Prepared for : DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : 680106 D01 Wireless Power Transfer v04 Date of Test : 2025-09-28 ~ 2025-10-29 Date of Issue : 2025-10-30 Prepared by : Lena Wen Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0035250941FRF15 Page 2 of 14 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2025-10-30 Valid Initial release Report No.: TZ0035250941FRF15 Page 3 of 14 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ....................................................... 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 4 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 6 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 2. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 7 2.1. EUT Configuration .................................................................................................................. 7 2.2. EUT Exercise ........................................................................................................................... 7 2.3. Test Sample ............................................................................................................................. 7 2.4. Special Accessories ............................................................................................................... 7 2.5. Test Instruments ..................................................................................................................... 7 2.6. Equipment Modifications ....................................................................................................... 7 2.7. Configuration of Tested System ............................................................................................ 7 3. T E S T R E S U L T ...................................................................... 8 3.1. Limit of Maximum Permissible Exposure ............................................................................. 8 3.2. Measurement Setup ................................................................................................................ 8 3.3. Measurement Procedure ........................................................................................................ 9 3.4. Result of Maximum Permissible Exposure ........................................................................ 10 4. T E S T S E T U P P H O T O G R A P H S O F E U T ..................................... 11 5. E X T E R I O R P H O T O G R A P H S O F E U T ........................................ 14 6. I N T E R I O R P H O T O G R A P H S O F E U T ........................................ 14 Report No.: TZ0035250941FRF15 Page 4 of 14 1. G E N E R A L I N F O R M A T I O N 1.1. Client Information Applicant : DGL Group LTD. Address : 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Manufacturer : DGL Group LTD. Address : 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States 1.2. Description of Device (EUT) Product Name : Charging Lamp Trade Mark : FOREVER SUNDAYS Model Number : SUN-TWWL-BLK, SUN-TWWL, SUN-TWWL-XXX Model Declaration : The color of the appearance of the model is different, and the internal circuitry is completely consistent Test Model : SUN-TWWL-BLK Power Supply : Input: DC 5V/9V by adapter Hardware version : V1.0 Software version : V1.0 1.3. Wireless Function Tested in this Report WPT Operation Frequency : 110.5 – 205 kHz Test Frequency : 129.7kHz Modulation Technology : ASK Antenna Type and Gain : Coil Antenna with 0dBi Gain Maximum Wireless Charging Power : 15W Note 1: Antenna position refer to EUT Photos. Note 2: the above information was supplied by the applicant. Report No.: TZ0035250941FRF15 Page 5 of 14 1.4. EUT configuration ○supplied by the manufacturer ●supplied by the lab ● Adapter Model: MDY-10-EH Input: Input AC 100-240V 50/60Hz 0.7A Output: Output DC 5V-3A, 9V-3A, 12V-2.25A, 20V-1.35A 1.5. Description of Test Facility FCC Designation Number: CN1275 Test Firm Registration …

Text truncated - open the document above for the full version.

承 认 书 客户名称（CUSTOMER): 品名（DESCRIPTION) : DATE:2024/12/2 规格（SPECIFICATION) ：G45+0.15*15丝包线 40长 部门 品质 工程 部门 开发工 程 采购 品质 ADD：深圳市龙华新区观澜环观中路48号1栋2楼 TEL：15112254520 FAX：+86-0755-28015170 page:1/2 备注： 深 圳 市 鸿 日 昇 威 科 技 有 限 公 司 HRSW ELECTRONICS CO.,LTD 备注： 轩 宏 达 科 技 承 认 签 核、盖章 确认/日期审核/日期批准/日期 (盖公司公 章) 董晚红吕惠韦函满 何伟华韦立红韦立红 SPECIFICATION FOR APPROVAL 轩 宏 达 科 技 有 限 公 司 客户料号（CUSTOMER P/N）: 鸿日昇威科技承认签核、盖章 确认/日期审核/日期批准/日期 (盖公司公 章) 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABC D2EHI 45±0.0520.5±0.3 0.8±0.1510±24±22.5MAX5.3±0.2 3.WINDING： ST EP TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 6 7 page:2/2 何伟华韦立红韦立红 TES T CON HRSW ELECTRONICS CO.,LTD PART NO TITLE G45开槽+胶 40长 DRAWN BYCHECKED BY APPROVED BY 背胶 ⌀43*0.1 CUDAK CO.,LTD 胶水 黄胶9999 LIANCHENG CO.,LTD 高温胶纸 8mm宽高温胶纸 CUDAK CO.,LTD 无铅锡条无铅锡条 QIAODO 磁片 ⌀G50*0.8锰锌硬磁片开L槽 TAIYI CO.,LTD ITEMMATERIAL SPECIFICATIONMANUFACTURER 丝包线0.15*15股 丝包线0.15*23股 NANJINGJINNINGCO,LTD 100KHz,0.25V AT 25°C常温下 6.5uH±10% 75mΩ Max 80度Max HI-POT 线圈加磁片 S-F S-F 丝包线线⌀0.15*15 2UEW 10TS (Ref) LDCR温度范围 SPECIFICATION FOR APPROVAL START-FINISHWIRE TYPETURNS

Report No.: TZ0035250941FRF14 Page 1 of 23 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0035250941FRF14 Product Name : Charging Lamp Model/Type reference : SUN-TWWL-BLK, SUN-TWWL, SUN-TWWL-XXX FCC ID : 2AANZTWWL Prepared for : DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15C, ANSI C63.10-2020 Date of Test : 2025-09-28 ~ 2025-10-29 Date of Issue : 2025-10-30 Prepared by : Lena Wen Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0035250941FRF14 Page 2 of 23 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2025-10-30 Valid Initial release Report No.: TZ0035250941FRF14 Page 3 of 23 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ....................................................... 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. Wireless Function Tested in this Report .............................................................................. 4 1.4. EUT configuration ................................................................................................................... 5 1.5. Description of Test Facility .................................................................................................... 5 1.6. Statement of the Measurement Uncertainty ......................................................................... 6 1.7. Measurement Uncertainty ...................................................................................................... 6 1.8. Description of Test Modes ..................................................................................................... 6 2. T E S T M E T H O D O L O G Y ............................................................ 7 2.1. EUT Configuration .................................................................................................................. 7 2.2. EUT Exercise ........................................................................................................................... 7 2.3. Test Sample ............................................................................................................................. 7 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 8 3.1. Justification ............................................................................................................................. 8 3.2. Special Accessories ............................................................................................................... 8 3.3. Block Diagram/Schematics .................................................................................................... 8 3.4. Equipment Modifications ....................................................................................................... 8 3.5. Configuration of Tested System ............................................................................................ 8 4. S U M M A R Y O F T E S T R E S U L T S ................................................. 9 5. T E S T R E S U L T .................................................................... 10 5.1. Bandwidth Measurement ..................................................................................................... 10 5.2. Radiated Emissions Measurement ...................................................................................... 12 5.3. AC Power line conducted emissions .................................................................................. 18 5.4. Antenna Requirements ......................................................................................................... 21 6. L I S T O F M E A S U R I N G E Q U I P M E N T S ....................................... 22 7. T E S T S E T U P P H O T O G R A P H S O F E U T ..................................... 23 8. E X T E R I O R P H O T O G R A P H S O F E U T ........................................ 23 9. I N T E R I O R P H O T O G R A P H S O F E U T ........................................ 23 Report No.: TZ0035250941FRF14 Page 4 of 23 1. G E N E R A L I N F O R M A T I O N 1.1. Client Information Applicant : DGL Group LTD. Address : 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States Manufacturer : DGL Group LTD. Address : 2045 Lincoln Highway, 3rd Floor, Edison, New Jersey United States 1.2. Description of Device (EUT) Product Name : Charging Lamp Trade Mark : FOREVER SUNDAYS Model Number : SUN-TWWL-BLK, SUN-TWWL, SUN-TWWL-XXX Model Declaration : The color of the appearance of the model is different, and the internal circuitry is completely consistent Test Model : SUN-TWWL-BLK Power Supply : Input: DC 5V/9V by adapter Hardware version : V1.0 Software version : V1.0 1.3. Wireless Function Tested in this Report WPT Operation Frequency : 110.5 – 205 kHz Test Frequency : 129.7kHz Modulation Technology : ASK Antenna Type and Gain : Coil Antenna with 0dBi Gain Maximum Wireless Charging Power : 15W Note …

Text truncated - open the document above for the full version.

Report No.: TZ0035250941PH01 Page 1 of 2 Test Setup Photos of the EUT Conducted Emission Radiated Emission Below 30MHz Report No.: TZ0035250941PH01 Page 2 of 2 Radiated Emission Below 1GHz