2AAP6ZM1100B1Tablet PC

This device has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers tothe rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram averaged over 1 gram of tissue. When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its operation in the 5.15-5.25 GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High power radar is allocated as the primary user of the 5.25-5.35 GHz and 5.65-5.85 GHz bands. These radar stations can cause interference with and/or damage to this device. En cas d'utilisation d'un LAN sans fil IEEE 802.11a, ce produit ne peut être utilisé qu'à l'intérieur en raison de son fonctionnement dans une plage des fréquences allant de 5,15 à 5,25 GHz. Industrie Canada exige l'utilisation de ce produit à l'intérieur pour une plage des fréquences allant de 5,15 à 5,25 GHz afin de réduire les éventuelles interférences nuisibles avec les systèmes mobiles par satellite du même canal. Le radar de grande puissance est considéré comme l'utilisateur principal des bandes de 5,25 à 5,35 GHz et de 5,65 à 5,85 GHz. Ces stations radar peuvent provoquer des interférences avec ce périphérique et/ou l'endommager.

Page 1 of 2 Type Designation: NS-P11W6100 External Photos Report Number: 17052521 001 - 004 Page 2 of 2 Type Designation: NS-P11W6100 External Photos Report Number: 17052521 001 - 004

Page 1 of 3 Type Designation: NS-P11W6100 Internal Photos Report Number: 17052521 001 - 004 Page 2 of 3 Type Designation: NS-P11W6100 Internal Photos Report Number: 17052521 001 - 004 Page 3 of 3 Type Designation: NS-P11W6100 Internal Photos Report Number: 17052521 001 - 004

Shenzhen Zowee Technology Co., Ltd. Date: 29/9/2015 FCC ID: 2AAP6ZM1100B1 Software Security Description We, Shenzhen Zowee Technology Co., Ltd., hereby declare that requirements of Tablet PC have been met and shown on the following question. Software Security Description General Description 1. Describe how any software/firmware update will be obtained, downloaded, and installed. Software that is accessed through manufacturer’s website or device’s management system, must describe the different levels of security. Description: The software only can be downloaded from Broadcom’s website and installed by end user.and there is a detail doc for end users 2. Describe all the radio frequency parameters that are modified by any software/firmware without any hardware changes. Are these parameters in some way limited, such that, it will not exceed the authorized parameters? Description: The radio frequency can not be configured via UI:Channel and Channel Bandwidth. All above two parameters are limited as a pre-set list for user to select from UI. 3. Describe in detail the authentication protocols that are in place to ensure that the source of the software/firmware is legitimate. Describe in detail how the software is protected against modification. Description: The source is a read-only websit. 4. Describe in detail the verification protocols in place to ensure that installed software/firmware is legitimate. Description: Firmware itself has a private checksum value inside ,if verified and then it cannot be allowed to be updated. 5. Describe in detail any encryption methods used to support the use of legitimate software/firmware. Description: Ssl /aes /tkip 6. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation? Description: Our device has two radios ,2.4G and 5G band.when client mode is enabled ,the working band also must be selected.and the master mode working on that band will be disabled automatically. Third-Party Access Control 1. Explain if any third parties have the capability to operate a US sold device on any other regulatory domain, frequencies, or in any manner Shenzhen Zowee Technology Co., Ltd. that is in violation of the certification. Description: It is impossible.Because RF parameters,country and other parameters are permanent settings in the rom 2. What prevents third parties from loading non-US versions of the software/firmware on the device? Describe in detail how the device is protected from “flashing” and the installation of third-party firmware such as DD-WRT. Description: All parameters indicating different countries are permanent settings in the ROM.The software itselt doesn’t contain these parameters and so it will not be affected by version of software. 3. For Certified Transmitter modular devices, describe how the module grantee ensures that hosts manufactures fully comply with these software security requirements for U-NII devices. If the module is controlled through driver software loaded in the host, describe how the drivers are controlled and managed such that the modular transmitter parameters are not modified outside the grant of authorization. Description: The product is not a modular device. Software Security Description User Configuration Guide 1. To whom is the UI accessible? (Professional installer, end user, other.) Description: all of them a) What parameters are viewable to the professional installer/end- user? Description: Mode,Channel Bandwidth,Primary Channel. b) What parameters are accessible or modifiable by the professional installer? Description: Same as above. (1) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized? Description: All the parameters have pre-defined range according to the certification test result ,They are stored in the rom and shown in UI,which not allow user to adjust beyond the pre-set value (2) What controls exist that the user cannot operate the device outside its authorization in the U.S.? Description: All the parameters indicating different countries are permanent settinds in the rom .so if a device is a product for US,it cannot be changed for another region. c) What parameters are accessible or modifiable to by the end-user? Description: Mode ,Channel Bandwidth ,Primary Channel

Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 004 Seite 2 von 31 Page 2 of 31 STATEMENT OF COMPLIANCE TEST ITEM SPECIFICATION RESULT Specific Absorption Rate - Wi-Fi 802.11 b/g/n - 2.4GHz Band Exposure Rules 47 C.F.R 2.1093 Radiofrequency Radiation Exposure Evaluation: Portable Devices KDB 447498 D01 General RF Exposure Guidance v05r02 KDB 248227 D01 802.11 Wi-Fi SAR v02r01 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r03 KDB 865664 D02 RF Exposure Reporting v01r01 KDB 616217 D04 SAR for laptop and tablets v01r01 KDB 941225 D06 Hotspot Mode v02 PASS Specific Absorption Rate - Wi-Fi 802.11 a/n - 5.2GHz Band PASS Specific Absorption Rate - Wi-Fi 802.11 a/n - 5.8GHz Band PASS Specific Absorption Rate – Bluetooth BDR - 2.4GHz Band PASS This device complies with Specific Absorption Rate (SAR) for general population/uncontrolled exposure limits (1.6W/kg) specified in CFR Title 47 Part 2 Subpart J Section 2.1093 and ANSI/IEEE C95.1-1992. This device has been testd in accordance with the measurement methods and procedure specified in IEEE 1528-2003 and Published RF exposure KDB procedures Refer to the maximum results of Specific Absorption Rate (SAR) durning testing as below. FREQUENCY BAND EXPOSURE POSITION EQUIPMENT CLASS HIGHEST REPORTED SAR VALUE (W/KG) 802.11 b/g/n - 2.4GHz Band Body DTS 0.685 802.11 a/n - 5.2GHz Band Body NII 0.318 802.11 a/n - 5.8GHz Band Body 0.455 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 004 Seite 3 von 31 Page 3 of 31 Contents 1. GENERAL REMARKS ......................................................................................................... 5 1.1 COMPLEMENTARY MATERIALS .......................................................................................... 5 2. TEST SITES ...................................................................................................................... 5 2.1 TEST FACILITIES ............................................................................................................... 5 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................................... 6 3. GENERAL PRODUCT INFORMATION .................................................................................... 7 3.1 PRODUCT FUNCTION AND INTENDED USE ........................................................................... 7 3.2 RATINGS AND SYSTEM DETAILS ........................................................................................ 7 3.3 INDEPENDENT OPERATION MODES .................................................................................... 9 3.4 SUBMITTED DOCUMENTS .................................................................................................. 9 4. SAR MEASUREMENTS SYSTEM CONFIGURATION .............................................................. 10 4.1 SAR MEASUREMENTS SET-UP ........................................................................................ 10 4.2 DASY5 E-FILD PROBE SYSTEM ...................................................................................... 11 4.3 E-FILED PROBE CALIBRATION ......................................................................................... 12 4.4 OTHER TEST EQUIPMENT ................................................................................................ 12 4.4.1 Data Acquisition Electronics (DAE) ............................................................................................ 12 4.4.2 Robot .......................................................................................................................................... 13 4.4.3 Measurement Server .................................................................................................................. 14 4.4.4 Device Holder for Phantom ........................................................................................................ 14 4.4.5 Phantom ..................................................................................................................................... 15 4.5 SCANNING PROCEDURE .................................................................................................. 16 4.6 DATA STORAGE AND EVALUATION ................................................................................... 18 4.6.1 Data Storage .............................................................................................................................. 18 4.6.2 Data Evaluation by SEMCAD..................................................................................................... 18 5. TEST SET-UP AND OPERATION MODES ............................................................................ 20 5.1 PRINCIPLE OF CONFIGURATION SELECTION ...................................................................... 20 5.2 TISSUE SIMULATING LIQUID INGREDIENTS ........................................................................ 20 5.3 SPECIFIC ABSORPTION RATE (SAR) SYSTEM CHECK ....................................................... 21 5.4 EXPOSURE POSITIONS CONSIDERATION ........................................................................... 23 5.5 TEST OPERATION AND TEST SOFTWARE .......................................................................... 24 5.6 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ........................................................ 24 6. TEST RESULTS ............................................................................................................... 25 6.1 HUAMAN EXPOSURE TO RADIOFREQUENCY ELECTROMAGNETIC FIELDS ............................ 25 6.2 MEASUREMENT UNCERTAINTY......................................................................................... 29 6.2.1 Measurement uncertainty evaluation ......................................................................................... 29 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 004 Seite 4 von 31 Page 4 of 31 7. PHOTOGRAPHS OF THE TEST SET-UP ...........…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 2 von 138 Page 2 of 138 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Pass 5.1.2 PEAK OUTPUT POWER RESULT: Pass 5.1.3 20DB BANDWIDTH AND 99% BANDWIDTH RESULT: Pass 5.1.4 6DB BANDWIDTH AND 99% BANDWIDTH RESULT: Pass 5.1.5 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100KHZ BANDWIDTH RESULT: Pass 5.1.6 POWER SPECTRAL DENSITY RESULT: Pass 5.1.7 SPURIOUS EMISSION RESULT: Pass 5.1.8 FREQUENCY SEPARATION RESULT: Pass 5.1.9 NUMBER OF HOPPING FREQUENCY RESULT: Pass 5.1.10 TIME OF OCCUPANCY RESULT: Pass 5.1.11 CONDUCTED EMISSIONS RESULT: Pass Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 3 von 138 Page 3 of 138 Contents 1. GENERAL REMARKS ......................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS .......................................................................................... 4 2. TEST SITES ...................................................................................................................... 4 2.1 TEST FACILITIES ............................................................................................................... 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................................... 5 2.3 TRACEABILITY .................................................................................................................. 6 2.4 CALIBRATION ................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY........................................................................................... 6 2.6 LOCATION OF ORIGINAL DATA ........................................................................................... 6 2.7 STATUS OF FACILITY USED FOR TESTING ........................................................................... 7 3. GENERAL PRODUCT INFORMATION .................................................................................... 8 3.1 PRODUCT FUNCTION AND INTENDED USE ........................................................................... 8 3.2 RATINGS AND SYSTEM DETAILS ........................................................................................ 8 3.3 INDEPENDENT OPERATION MODES .................................................................................. 10 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ..................................................... 10 3.5 SUBMITTED DOCUMENTS ................................................................................................ 10 4. TEST SET-UP AND OPERATION MODES ............................................................................ 11 4.1 PRINCIPLE OF CONFIGURATION SELECTION ...................................................................... 11 4.2 TEST OPERATION AND TEST SOFTWARE .......................................................................... 11 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ........................................................ 11 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ....................................................... 11 4.5 TEST SETUP DIAGRAM .................................................................................................... 12 5. TEST RESULTS ............................................................................................................... 14 5.1 TRANSMITTER REQUIREMENT & TEST SUITES .................................................................. 14 5.1.1 Antenna Requirement ................................................................................................................ 14 5.1.2 Peak Output Power .................................................................................................................... 15 5.1.3 20dB Bandwidth and 99% Bandwidth ........................................................................................ 16 5.1.4 6dB Bandwidth and 99% Bandwidth .......................................................................................... 17 5.1.5 Conducted Spurious Emissions measured in 100kHz Bandwidth ............................................. 18 5.1.6 Power spectral density ............................................................................................................... 31 5.1.7 Spurious Emission ..................................................................................................................... 32 5.1.8 Frequency Separation .............................................................................................................. 126 5.1.9 Number of hopping frequency .................................................................................................. 127 5.1 .10 Time of Occupancy .............................................................................................................. 128 5.1.11 Conducted emissions .......................................................................................................... 129 6. PHOTOGRAPHS OF THE TEST SET-UP ............................................................................ 134 7. LIST OF TABLES ........................................................................................................... 138 8. LIST OF PHOTOGRAPHS ................................................................................................ 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 4 von 138 Page 4 of 138 1. General Remarks 1.1 Complementary Materials None. 2. Test Sites 2.1 Test Facilities Shenzhen EMTEK Co., Ltd. (FCC Registration No.: 709623) (Test site Industry Canada No.: 4480A-4) Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, P.R. China The tests at the test site have been conducted under the supervision of a TÜV engineer. Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 71 von 138 Page 71 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 72 von 138 Page 72 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 73 von 138 Page 73 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 74 von 138 Page 74 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 75 von 138 Page 75 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 76 von 138 Page 76 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 77 von 138 Page 77 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 78 von 138 Page 78 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 79 von 138 Page 79 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 80 von 138 Page 80 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 81 von 138 Page 81 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 82 von 138 Page 82 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 83 von 138 Page 83 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 84 von 138 Page 84 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 85 von 138 Page 85 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 86 von 138 Page 86 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 87 von 138 Page 87 of 138 Test Plot of Band Edge of BDR & EDR Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 88 von 138 Page 88 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 89 von 138 Page 89 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 90 von 138 Page 90 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 91 von 138 Page 91 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 92 von 138 Page 92 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 93 von 138 Page 93 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 94 von 138 Page 94 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 95 von 138 Page 95 of 138 Test Plot of 2402MHz-X of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 96 von 138 Page 96 of 138 Test Plot of 2402MHz-Y of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 97 von 138 Page 97 of 138 Test Plot of 2402MHz-Z of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 98 von 138 Page 98 of 138 Test Plot of 2440MHz-X of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 99 von 138 Page 99 of 138 Test Plot of 2440MHz-Y of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 100 von 138 Page 100 of 138 Test Plot of 2440MHz-Z of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 101 von 138 Page 101 of 138 Test Plot of 2480MHz-X of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 102 von 138 Page 102 of 138 Test Plot of 2480MHz-Y of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 103 von 138 Page 103 of 138 Test Plot of 2480MHz-Z of Low Energy mode Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 104 von 138 Page 104 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 105 von 138 Page 105 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 106 von 138 Page 106 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 107 von 138 Page 107 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 108 von 138 Page 108 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 109 von 138 Page 109 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 110 von 138 Page 110 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 111 von 138 Page 111 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 112 von 138 Page 112 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 113 von 138 Page 113 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 114 von 138 Page 114 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 115 von 138 Page 115 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 116 von 138 Page 116 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 117 von 138 Page 117 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 118 von 138 Page 118 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 119 von 138 Page 119 of 138 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 001 Seite 120 von 138 Page 120 of 138

Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 002 Seite 2 von 154 Page 2 of 154 TEST SUMMARY 5.1.1 ANTENNA REQUIREMENT RESULT: Pass 5.1.2 PEAK OUTPUT POWER RESULT: Pass 5.1.3 6DB BANDWIDTH AND 99% BANDWIDTH RESULT: Pass 5.1.4 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100KHZ BANDWIDTH RESULT: Pass 5.1.5 POWER SPECTRAL DENSITY RESULT: Pass 5.1.6 SPURIOUS EMISSION RESULT: Pass 5.1.7 CONDUCTED EMISSIONS RESULT: Pass Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 002 Seite 3 von 154 Page 3 of 154 CONTENTS 1. GENERAL REMARKS ......................................................................................................... 4 1.1 COMPLEMENTARY MATERIALS .......................................................................................... 4 2. TEST SITES ...................................................................................................................... 4 2.1 TEST FACILITIES ............................................................................................................... 4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ............................................................... 5 2.3 TRACEABILITY .................................................................................................................. 6 2.4 CALIBRATION ................................................................................................................... 6 2.5 MEASUREMENT UNCERTAINTY........................................................................................... 6 2.6 LOCATION OF ORIGINAL DATA ........................................................................................... 6 2.7 STATUS OF FACILITY USED FOR TESTING ........................................................................... 7 3. GENERAL PRODUCT INFORMATION .................................................................................... 8 3.1 PRODUCT FUNCTION AND INTENDED USE ........................................................................... 8 3.2 RATINGS AND SYSTEM DETAILS ........................................................................................ 8 3.3 INDEPENDENT OPERATION MODES .................................................................................... 9 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS ....................................................... 9 3.5 SUBMITTED DOCUMENTS .................................................................................................. 9 4. TEST SET-UP AN D OPERATION MODES ............................................................................ 10 4.1 PRINCIPLE OF CONFIGURATION SELECTION ...................................................................... 10 4.2 TEST OPERATION AND TEST SOFTWARE .......................................................................... 10 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ........................................................ 10 4.4 COUNTERMEASURES TO ACHIEVE ERM COMPLIANCE ...................................................... 10 4.5 TEST SETUP DIAGRAM .................................................................................................... 11 5. TEST RESULTS ............................................................................................................... 13 5.1 TRANSMITTER REQUIREMENT & TEST SUITES .................................................................. 13 5.1.1 Antenna Requirement ................................................................................................................ 13 5.1.2 Peak Output Power .................................................................................................................... 14 5.1.3 6dB Bandwidth and 99% Bandwidth .......................................................................................... 16 5.1.4 Conducted Spurious Emissions measured in 100kHz Bandwidth ............................................. 17 5.1.5 Power spectral density ............................................................................................................... 34 5.1.6 Spurious Emission ..................................................................................................................... 35 5.1.7 Conducted emissions ............................................................................................................... 149 6. PHOTOGRAPHS OF THE TEST SET-UP ............................................................................ 152 7. LIST OF TABLES ........................................................................................................... 154 8. LIST OF PHOTOGRAPHS ................................................................................................ 154 Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 002 Seite 4 von 154 Page 4 of 154 1. General Remarks 1.1 Complementary Materials None. 2. Test Sites 2.1 Test Facilities Shenzhen EMTEK Co., Ltd. (FCC Registration No.: 709623) (Test site Industry Canada No.: 4480A-4) Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, P.R. China The tests at the test site have been conducted under the supervision of a TÜV engineer. Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 002 Seite 5 von 154 Page 5 of 154 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment Kind of Equipment Manufacturer Type S/N Calibrated until Transmitter spurious emissions EMI Test Receiver Rohde & Schwarz ESU 1302.6005.26 2016-05-16 Loop Antenna Schwarzbeck FMZB 1519 1519-012 2016-05-16 Cable H+B 3M SF104-26.5 295838/4 2016-05-28 Cable H+B 6M SF104-26.5 295840/4 2016-05-28 Pre-Amplifier HP 8447F 2944A07999 2016-05-16 Bilog Antenna Schwarzbeck VULB9163 142 2016-05-28 Cable Schwarzbeck AK9513 ACRX1 2016-05-16 Cable Rosenberger N/A FP2RX2 2016-05-16 Cable Schwarzbeck AK9513 CRPX1 2016-05-28 Cable Schwarzbeck AK9513 CRRX2 2016-05-28 Pre-Amplifier A.H. PAM-0126 1415261 2016-05-…

Text truncated - open the document above for the full version.

Produkte Products Prüfbericht - Nr.: Test Report No. 17052521 003 Seite 223 von 226 Page 223 of 226 6. Photographs of the Test Set-Up Photograph 1: Set-up for Conducted Emissions Photograph 2: Set-up for Spurious Emissions for below 30MHz Produkte Products Prüfber…

Text truncated - open the document above for the full version.