2AAP8G005DOMEN Frequency Wireless Headset

Color Side 1: CMYK + PMS 1505; bleeds 2 sides Flat size: 22 x 17 in Fold 1: 4-panel accordion Fold 2: In half Color Side 2: CMYK + PMS 1505; bleeds 2 sides Folded size: 5.5 x 8.5 in 20008 Champion Forest Dr., Suite #1102 Spring, TX 77379 832-717-4331 1 Power button 2 Effect light Solid white (default): The headset is on. You can use the software to customize this light. 3 Lighting button: Press to turn lighting on or off. 4 Audio-out (headphone)/Audio-in (microphone) combo jack 5 Environmental noise cancellation (ENC) microphone 6 USB Type-C charging port 7 Power/battery status light • Solid white: The headset is on. • Blinking white: There is an issue with the connection to the computer. • Solid amber: The headset is charging. • Blinking amber: The battery charge level is less than 20%. To alert you, the headset beeps twice with increasing frequency. العربية الطاقة زر 1 التأثير مصباح 2 .التشغيل قيد الرأس سماعة :(افتراضي) ثابت أبيض .المصباح هذا لتخصيص البرنامج استخدام يمكنك .التشغيل إيقاف أو للتشغيل عليه اضغط :المضيء الزر 3 داخل صوت/(رأس سماعة) خارج لصوت مشترك مأخذ 4 (ميكروفون) (ENC) البيئي التشويش إلغاء بتقنية ميكروفون 5 USB Type-C شحن منفذ 6 البطارية حالة/الطاقة مصباح 7 .التشغيل قيد الرأس سماعة :ثابت أبيض • .بالكمبيوتر التوصيل في مشكلة هناك :وامض أبيض • .الرأس سماعة شحن يجري :ثابت كهرماني • من أقل البطارية شحن مستوى :وامض كهرماني • صفير صوت الرأس سماعة تصدر لتنبيهك، .%20 .متزايد بتكرار مرتين بتوصيل قم أو USB بمنفذ الاستقبال جهاز بتوصيل قم 2 سماعه) الخارج للصوت مشترك بمأخذ الرأس سماعة .(الميكروفون) الداخل الصوت/(الرأس .فقط إضافي كبل باستخدام من إلا Xbox® لصوت دعم يتوفر ال التشغيل بنظام يعمل كمبيوتر جهاز تستخدم كنت إذا 4 Start فحدد ا، ً تلقائي البرنامج تنزيل يتم ولم Windows® 10 ابحث .(Microsoft متجر) Microsoft Store حدد ثم ،(ابدأ) .التطبيق بتنزيل قم ثم ،OMEN Command Center عن انتقل الرأس، سماعة برمجة حول المعلومات من لمزيد للعثور التعليمات واتبع ،http://www.hp.com/support إلى .(المستخدم دلائل) User Guides حدد ثم .منتجك على BAHASA INDONESIA 1 Tombol Daya 2 Lampu efek Putih solid (default): Headset sudah terpasang. Anda dapat menggunakan perangkat lunak untuk menyesuaikan lampu ini. 3 Tombol pencahayaan: Tekan untuk menyalakan atau mematikan lampu. 4 Soket combo keluaran audio (headphone)/masukan audio (mikrofon) 5 Mikrofon pembatalan derau lingkungan (ENC) 6 Port pengisian daya USB Tipe C 7 Lampu status daya/baterai • Putih solid: Headset sudah terpasang. • Putih berkedip: Ada masalah dengan koneksi pada komputer. • Kuning tua solid: Headset sedang mengisi daya. • Kuning tua berkedip: Level daya baterai kurang dari 20%. Untuk memberi tahu Anda, headset akan berbunyi bip dua kali ketika menambah frekuensi. 2 Sambungkan pemancar penerima ke port USB dan headset ke combo keluaran audio (headphone)/ masukan audio (mikrofon). Audio Xbox® hanya didukung melalui kabel tambahan. 4 Jika Anda menggunakan komputer yang menjalankan sistem operasi Windows® 10 dan perangkat lunaknya tidak diunduh secara otomatis, pilih Start (Mulai), lalu pilih Microsoft Store. Cari OMEN Command Center, lalu unduh aplikasinya. Untuk informasi lebih lanjut tentang konfigurasi headset, kunjungi http://www.hp.com/support dan ikuti petunjuk untuk menemukan produk Anda. Kemudian pilih User Guides (Panduan Pengguna). БЪЛГАРСКИ 1 Бутон на захранването 2 Индикатор за ефекти Непрекъснато бяло (по подразбиране): Слушалките са включени. Можете да използвате софтуера, за да персонализирате този индикатор. 3 Бутон за осветяването: Натиснете, за да включите или изключите осветяването. 4 Комбиниран куплунг за аудиоизход (за слушалки)/ аудиовход (за микрофон) 5 Микрофон за потискане на околния шум (ENC) 6 USB Type-C порт за зареждане 7 Индикатор за състоянието на захранването/ батерията • Непрекъснато бяло: Слушалките са включени. • Мигащо бяло: Има проблем с връзката към компютъра. • Непрекъснато кехлибарено: Слушалките се зареждат. • Мигащо кехлибарено: Нивото на заряд на батерията е под 20%. Слушалките издават предупредителен двукратен звуков сигнал с нарастваща честота. 2 Свържете приемника към USB порт или свържете слушалките към комбиниран куплунг за аудиоизход (за слушалки)/аудиовход (за микрофон). Аудиото за Xbox® се поддържа само чрез допълнителен кабел. 4 Ако използвате компютър с операционна система Windows® 10 и софтуерът не се изтегля автоматично, изберете Старт, след което изберете Microsoft Store. Потърсете OMEN Command Center, след което изтеглете приложението. За повече информация относно конфигурирането на слушалките отидете на http://www.hp.com/support, след което изпълнете инструкциите, за да намерите своя продукт. След това изберете User Guides (Ръководства за потребителя). ČESKY 1 Tlačítko napájení 2 Kontrolka efektu Svítí bíle (výchozí): Náhlavní souprava je zapnutá. Software můžete použít k přizpůsobení této kontrolky. 3 Tlačítko osvětlení: Stisknutím zapnete nebo vypnete osvětlení. 4 Kombinovaný konektor zvukového výstupu (pro sluchátka) / zvukového vstupu (pro mikrofon) 5 Mikrofon s funkcí potlačení šumu okolního prostředí (ENC) 6 Nabíjecí port USB Type-C 7 Kontrolka stavu napájení/baterie • Svítí bíle: Náhlavní souprava je zapnutá. • Bliká bíle: Došlo k problému s připojením k počítači. • Svítí oranžově: Náhlavní souprava se nabíjí. • Bliká oranžově: Úroveň nabití baterie je nižší než 20 %. Aby vás upozornila, pípne náhlavní souprava dvakrát v rostoucí frekvenci. 2 Připojte přijímač k portu USB nebo připojte náhlavní soupravu do kombinovaného konektoru zvukového výstupu (pro sluchátka) / zvukového vstupu (mikrofon). Zvuk Xbox® je podporován pouze pomocí pomocného kabelu. 4 Pokud používáte počítač s operačním systémem Windows® 10 a software se nestahuje automaticky, klikněte na tlačítko Start a poté vyberte položku Microsoft Store. Vyhledejte aplikaci OMEN Command Center a poté ji stáhněte. Pokud chcete získat další informace o programování náhlavní soupravy, přejděte na stránku http://www.hp.com/support a k nalezení svého produktu postupujte podle pokynů. Dále vyberte možnost Uživatelské příručky. DANSK 1 Tæ…

Text truncated - open the document above for the full version.

20008 CHAMPION FOREST DR. SUITE 1102 SPRING, TX 77379 832-717-4331 Color side 1: BLACK Flat size: 14 x 24 in. Fold 1: 6-panel accordion Fold 2: 4-panel accordion Color side 2: BLACK Finished size: 3.5 x 4 in. ˣˁ̷̼͂ˏ˄ˏ˼ˍ́˯ʴ Pemberitahuan produk ͥΉΏΉΊΎΌ΋ ́ΓΔΒΈΗΎΖ ́ Obavještenja o proizvodu Informace o produktu Produktbemærkninger Produkthinweise Tootemärkused Avisos sobre el producto уѐѕюђѶќюђћљњјѰѲіѝјћ Informations sur le produit Obavijesti o proizvodima Normative del prodotto ЙΑΪΐΖΗΔ ́ΏΟΉΕΎΉΔΖΗΏΉΔ 3D]LģRMXPLSDUL]VWUÜGÜMXPX ĉVSòMLPXRVHGòOSURGXNWō Termékinformációk Productaankondigingen Produktopplysninger Informacje na temat produktów Avisos do produto Avisos sobre o produto 1RWLƬFÞULGHVSUHSURGXV ͷΆΉΈΒΐΏΉΑΌΣΒΓΔΒΈΗΎΖΉ Upozornenia o produkte Obvestila o izdelku Tuoteohjeista Obaveštenja o proizvodu Produktmeddelanden ȗȟȬǽȮȤȸǽ ȱ ɀ Ȟȣǽ ȭ ȖȘȡ Ȱ ȑȜ ȭ ȏȍ Ʉ Ürün Bildirimleri ͫ ́ΗΆ ́ΊΉΑΑΣΝΒΈΒΆΌΔΒ΅Η ৪న ϳ਺߷౏ ᶘ⎲弋⌻ 䐓⎲㯙 ᵼ曶 © Copyright 2015-2019 HP Development Company, L.P. Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Java is a registered trademark of Oracle and/or LWVDƫLOLDWHV The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Eleventh Edition: September 2019 First Edition: August 2015 Product Notices Regulatory Notices 7KLVGRFXPHQWSURYLGHVFRXQWU\DQGUHJLRQVSHFLƬFQRQZLUHOHVV and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product. ঱ࠚ܁नԿМ娔ܪਹऱݡঔࠞ۾з৩߶౎ۢࠠϿ৩ధব ਛࡣ১ݩ娔঻ࢋՌՖ঱نై১ݩਢ঴ݿԿаెব৩ధन ৠॲ֢ਹࣳঠࡣ঻ࢋՌՖ Federal Communications Commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the HTXLSPHQWRƫDQGRQWKHXVHULVHQFRXUDJHGWRWU\WRFRUUHFWWKH interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. r &RQQHFWWKHHTXLSPHQWWRDQRXWOHWRQDFLUFXLWGLƫHUHQWIURP that to which the receiver is connected. • Consult the dealer or an experienced radio or television technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. For questions regarding this product, write to HP Inc. 1501 Page Mill Road Palo Alto, CA 94304 email [email protected], or call HP at 650-857-1501. To identify your product, refer to the part, series, or model number located on the product. 0RGLƬFDWLRQV 7KH)&&UHTXLUHVWKHXVHUWREHQRWLƬHGWKDWDQ\FKDQJHVRU PRGLƬFDWLRQVPDGHWRWKLVGHYLFHWKDWDUHQRWH[SUHVVO\DSSURYHG by HP may void the user’s authority to operate the equipment. Cables To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods. Products with wireless LAN devices or HP Mobile Broadband Modules This device must not be co-located or operating in conjunction with any other antenna or transmitter. WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC/ Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers. During normal operation of tablet PCs and notebook computers with displays equal to or less than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer. During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC/Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer. CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. FCC/Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device. The antennas for this device are not replaceable. Any attempt at user access will damage your computer. Brazil notice Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autoriza…

Text truncated - open the document above for the full version.

Guoguang Electric Co.,Ltd Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: Guoguang Electric Co.,Ltd Contact Name: Alan Song Address: No.8 Jinghu Road, Xinhua Street, Huadu Reg, Guangzhou 510800 China Date: 7/31/2020

Guoguang Electric Co.,Ltd Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2AAP8G005D To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Guoguang Electric Co.,Ltd Contact Name: Alan Song Address: No.8 Jinghu Road, Xinhua Street, Huadu Reg, Guangzhou 510800 China Date: 7/31/2020

External Photographs Page 2 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-1 View of EUT-2 Page 3 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. . View of EUT-3 View of EUT-4

label location

Internal Photographs Page 2 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-1 Internal View of EUT-2 Page 3 of 3 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 Antenna

FCC ID: 2AAP8G005D According to KDB 447498 D01 General RF Exposure Guidance v06, section 4.3.1 At 100 MHz to 6 GHz and for test separation distances ≤ 50mm, the SAR test exclusion threshold is determined according to the following [(max. power of channel, including tune-up tolerance, ㎽) / (min. test separation distance, ㎜)] x [√f(㎓)] ≤ 3.0 1. SAR test exclusion threshold Frequency: 2 480 MHz (min. separation distances = 5 mm) SAR test exclusion thresholds (5 ㎜) = 3 x 5 / (√ 2.480) = 9.525 ㎽ Test mode Max. Tune-up Tolerance (mW) SAR Test Exclusion Thresholds (5mm) (mW) GFSK 2.00 9.525 Calculation value: 2.00 (㎽) / 5 (㎜) x √ 2.480 = 0.630 So, Calculation value ≤ 3.0 Remark: -For Max. conducted power is 1.87 (㎽), so 2.00 (㎽) was calculated. -When the minimum test separation distance is < 5 ㎜, a distance of 5 ㎜ is applied to determine SAR test exclusion. 2. Conclusion: No SAR is required.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. CFR 47 FCC PART 15 SUBPART C ISED RSS-247 ISSUE 2 CERTIFICATION TEST REPORT For OMEN Frequency Wireless Headset MODEL NUMBER: HSA-G005D FCC ID: 2AAP8G005D IC: 9043A-G005D REPORT NUMBER: 4789394209-6 ISSUE DATE: August 14, 2020 Prepared for Guoguang Electric Company Ltd. No. 8 Jinghu Rd, Xinya Street, Huadu Region, Guangzhou P. R. China 510800 Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4789394209-6 Page 2 of 102 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0087 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 08/14/2020 Initial Issue REPORT NO.: 4789394209-6 Page 3 of 102 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0087 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Clause Test Items FCC/ISED Rules Test Results 1 6dB Bandwidth and 99% Occupied Bandwidth FCC Part 15.247 (a) (2) RSS-247 Clause 5.2 (a) ISED RSS-Gen Clause 6.7 Pass 2 Peak Conducted Output Power FCC Part 15.247 (b) (3) RSS-247 Clause 5.4 (d) Pass 3 Power Spectral Density FCC Part 15.247 (e) RSS-247 Clause 5.2 (b) Pass 4 Conducted Bandedge and Spurious Emission FCC Part 15.247 (d) RSS-247 Clause 5.5 Pass 5 Radiated Bandedge and Spurious Emission FCC Part 15.247 (d) FCC Part 15.209 FCC Part 15.205 RSS-247 Clause 5.5 RSS-GEN Clause 8.9 Pass 6 Conducted Emission Test for AC Power Port FCC Part 15.207 RSS-GEN Clause 8.8 Pass 7 Antenna Requirement FCC Part 15.203 RSS-GEN Clause 6.8 Pass Note: 1.This test report is only published to and used by the applicant, and it is not for evidence purpose in China. 2. The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C >< ISED RSS-247 > when <Accuracy Method> decision rule is applied. REPORT NO.: 4789394209-6 Page 4 of 102 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0087 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 6 2. TEST METHODOLOGY ..................................................................................................... 7 3. FACILITIES AND ACCREDITATION ................................................................................. 7 4. CALIBRATION AND UNCERTAINTY ................................................................................ 8 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................... 8 5. EQUIPMENT UNDER TEST ............................................................................................... 9 5.1. DESCRIPTION OF EUT .............................................................................................. 9 5.2. CHANNEL LIST ........................................................................................................... 9 5.3. MAXIMUM PEAK OUTPUT POWER ........................................................................... 9 5.4. TEST CHANNEL CONFIGURATION ..........................................................................10 5.5. THE WORSE CASE POWER SETTING PARAMETER ..............................................10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................10 5.7. DESCRIPTION OF TEST SETUP ...............................................................................11 6. MEASURING INSTRUMENT AND SOFTWARE USED ....................................................12 7. ANTENNA PORT TEST RESULTS ...................................................................................14 7.1. ON TIME AND DUTY CYCLE .....................................................................................14 7.2. 6 dB DTS BANDWIDTH AND 99% OCCUPIED BANDWIDTH ...................................15 7.3. CONDUCTED OUTPUT POWER ...............................................................................17 7.4. POWER SPECTRAL DENSITY ..................................................................................18 7.5. CONDUCTED BANDEDGE AND SPURIOUS EMISSIONS ........................................20 8. RADIATED TEST RESULTS .............................................................................................22 8.1. RESTRICTED BANDEDGE ........................................................................................28 8.1.1. LE MODE ............................................................................................................28 8.1.2. LE 2M MODE .......................................................................................................34 8.2. SPURIOUS EMISSIONS (1GHz ~ 3GHz) ...................................................................40 8.2.1. LE MODE ..............................................................................................…

Text truncated - open the document above for the full version.

Appendix II Setup Photographs RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) MEASUREMENT POSITION (X axis) MEASUREMENT POSITION (Y axis) MEASUREMENT POSITION (Z axis) RADIATED RF MEASUREMENT SETUP (30MHz~1GHz) RADIATED RF MEASUREMENT SETUP (Below 30MHz) POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP