2AAPFMKWFT-RWireless Flash Receiver

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. EU Declaration of Conformity Hereby, we are Hongkong Meike Digital Technology Co., LTD, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Honggkong Meike Digital Technology Co., LTD. FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company nameHonggkong Meike Digital Technology Co., LTD. AddressRoom 902.9/F., Fu Fai Commercial Centre, 27 Hillier Street , Sheung Wan, Hongkong CityHongkong CountryChina declare that the following representative (agent): Name (person)Justin Zhang Company nameShenzhen Toby Technology Co., Ltd. Address10/F., A Block, Jiada R & D Bldg., No.5 Songpingshan Road, Science & Technology Park CityShenzhen CountryChina is hereby authorized to apply the following equipment for certification on our behalf: Product DescriptionWireless Flash Trigger Type or Model(s)MK-RC8, MK-RC7, MK-RC9, MK-RC10, MK-RC11, MK-RC12, MKRC13, MK-RC14, MK-RC15, MK-RC16, MK-RC17, MK- RC18, MK-RC19, MK-RC20 Tradename or Brand(s)Meike We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Hongkong, China07/29/2013Qinghua LiManager

Honggkong Meike Digital Technology Co., LTD. FCC Confidentiality Request Number: CF303 Version: V02 Date:17-06-2011 To: Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company nameHonggkong Meike Digital Technology Co., LTD. AddressRoom 902.9/F., Fu Fai Commercial Centre, 27 Hillier Street , Sheung Wan , Hongkong CityHongkong CountryChina request for this certification filing under: Grantee CodeProduct Number FCC ID:2AAPFMKWFT-R to maintain permanent confidentiality for the following documents submitted within this application: (please cross what is applicable, or add other documents, provide the file name and description) ExhibitFile NameDescription vOperational DescriptionCircuit Diagram vBlock DiagramsBlock Diagram vSchematics DiagramsSchematic Diagram Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. The documents indicated as confidential above, are not publicly available elsewhere. Attestation: City and Country:Date:Name: (this must be a person) Function:Signature: (or official company stamp) Hongkong, China07/29/2013Qinghua LiManager

Report No.: TB-FCC137777 Page: 3 of 7 TB-RF-075-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT Report No.: TB-FCC137777 Page: 4 of 7 TB-RF-075-1.0 Photo 3 Appearance of EUT

Report No.: TB-FCC137777 Page: 2 of 7 TB-RF-075-1.0 Appendix II ID Label Location FCC ID LOCATION

Report No.: TB-FCC137777 Page: 5 of 7 TB-RF-075-1.0 Appendix IV EUT Internal Photographs Photo 4 Internal of EUT Photo 5 Appearance of PCB Report No.: TB-FCC137777 Page: 6 of 7 TB-RF-075-1.0 Photo 6 Appearance of PCB Printed Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TB-FCC137777 Page: 1 of 25 TB-RF-074-1.0 10/F., A Block, Jiada R & D Bldg., No.5 Songpingshan Road, Science & Technology Park, Nanshan District, Shenzhen, China Tel: +86 75526509301 Fax: +86 75526509195 FCC Radio Test Report FCC ID: 2AAPFMKWFT-R Report No. : TB-FCC137777 Applicant : Honggkong Meike Digital Technology Co., LTD. Equipment Under Test (EUT) EUT Name : Wireless Flash Trigger Model No. : MK-RC8 Serial No. : MK-RC7, MK-RC9, MK-RC10, MK-RC11, MK-RC12, MKRC13, MK-RC14, MK-RC15, MK-RC16, MK-RC17, MK- RC18, MK-RC19, MK-RC20 Brand Name : Meike Receipt Date : 2013-07-08 Test Date : 2013-07-30 to 2013-08-05 Issue Date : 2013-08-07 Standards : FCC Part 15, Subpart C(15.249) Test Method : ANSI C63.4:2003 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above, The EUT technically complies with the FCC requirements Test/Witness Engineer : Approved& Authorized : This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TB-FCC137777 Page: 2 of 25 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 4 1.1 Client Information ................................................................................................................. 4 1.2 General Description of EUT (Equipment Under Test) ................................................... 4 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 5 1.4 Description of Support Units .............................................................................................. 5 1.5 Description of Test Mode .................................................................................................... 5 1.6 Description of Test Software Setting ................................................................................ 6 1.7 Test Facility ........................................................................................................................... 7 2. TEST SUMMARY ....................................................................................................................... 7 3. CONDUCTED EMISSION TEST ............................................................................................. 9 3.1 Test Standard and Limit ...................................................................................................... 9 3.2 Test Setup ............................................................................................................................. 9 3.3 Test Procedure ..................................................................................................................... 9 3.4 Test Equipment Used ........................................................................................................ 10 3.5 EUT Operating Mode ........................................................................................................ 10 3.6 Test Data ............................................................................................................................. 10 4. RADIATED EMISSION TEST ................................................................................................ 11 4.1 Test Standard and Limit .................................................................................................... 11 4.2 Test Setup ........................................................................................................................... 12 4.3 Test Procedure ................................................................................................................... 13 4.4 EUT Operating Condition ................................................................................................. 13 4.5 Test Equipment .................................................................................................................. 14 4.6 Test Data ............................................................................................................................. 14 5. RESTRICTED BANDS REQUIREMENT ............................................................................. 20 5.1 Test Standard and Limit .................................................................................................... 20 5.2 Test Setup ........................................................................................................................... 20 5.3 Test Procedure ................................................................................................................... 20 5.4 EUT Operating Condition ................................................................................................. 21 5.5 Test Equipment .................................................................................................................. 21 5.6 Test Data ............................................................................................................................. 22 6. BANDWIDTH TEST ................................................................................................................. 23 6.1 Test Setup ........................................................................................................................... 23 6.2 Test Procedure ................................................................................................................... 23 6.3 EUT Operating Condition ................................................................................................. 23 6.4 Test Equipmen…

Text truncated - open the document above for the full version.

Report No.: TB-FCC137777 Page: 7 of 7 TB-RF-075-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz)