2AARNRCARFMBLRF module

For a host using a certified modular with a standard fixed label, if (1) the module’s FCC ID is not visible when installed in the host, or (2) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID: 2AARNRCARFMBL ” or “Contains FCC ID: 2AARNRCARFMBL” must be used. The host OEM user manual must also contain clear instructions on how end users can find and/or access the module and the FCC ID. For a Class B digital device NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/ TV technician for help.

PHIHONG TECHNOLOGY CO., LTD No. 568, Fu Xing 3rd Rd., GuiShan, Tao Yuan Hsien 33383,Taiwan tel : +886-2-8221-3685 Subject: Module Approval Date: 10/21/2013 FCC ID: 2AARNRCARFMBL Regarding to the FCC 15.212 , PHIHONG TECHNOLOGY CO.,LTD would like to request modular approval for the submission FCC ID PHIHONG TECHNOLOGY CO.,LTD confirms that the product complies with numbered requirements identified below: 1. The modular transmitter has its own RF shielding. (Please review external photos). 2. The modular transmitter has buffered modulation(/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of e xcessive data rates or over-modulation. (This modular transmitter has buffered modulation/data inputs which is controlled by the WLAN IC “RT5370”). 3. This modular transmitter has its own power supply regulation which is controlled by the WLAN IC “RT5370”. 4. The modular transmitter complies with the antenna requirements of Section 15.203 and 15.204(c). (Please review external photos or test report). 5. The modular transmitter is tested in a stand-alone configuration. (Please review test setup photos). 6. The modular transmitter is labeled with its own FCC ID number. (Please review label sample). 7. The modular transmitter complies with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. (The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual). 8. The modular transmitter complies with any applicable RF exposure requirements. Signature: Name: Morgen Huang Title: Engineer Company Name: PHIHONG TECHNOLOGY CO LTD

PHIHONG TECHNOLOGY CO., LTD Date:2013/10/16 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We,PHIHONG TECHNOLOGY CO., LTD, hereby authorize A Test Lab Techno Corp., address: No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C., phone: +886-3-2710188 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 2014/04/15. Sincerely, _______ ______________________________ Name / Title：Morgen Huang / Engineer Tel：886-3-3277288 ext.1864 E-mail：[email protected]

PHIHONG TECHNOLOGY CO., LTD Date :2013/9/16 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: 2AARNRCARFMBL Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, PHIHONG TECHNOLOGY CO., LTD hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Bill of Materials/Parts List Block Diagrams Operational Description PHIHONG TECHNOLOGY CO., LTD also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of (up to 180 days): Internal Photos External Photos User Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Morgen Huang (signed by FCC listed Grantee contact) Telephone Number: 886-3-3277288 ext.1864 Email: [email protected]

1 of 2 External Photos Model Number: RCA-RFM(BL) FCC ID: 2AARNRCARFMBL 2 of 2 EUT Photo 1 ) EUT Photo 2 )

1 of 2 Internal Photos Model Number: RCA-RFM(BL) FCC ID: 2AARNRCARFMBL 2 of 2 EUT Photo 1 ) EUT Photo 2 ) ANT.

FCC 47 CFR PART 15 SUBPART C Product Type ： RF module Applicant ： PHIHONG TECHNOLOGY CO LTD Address ： No. 568, Fu Xing 3rd Rd., GuiShan, Tao Yuan Hsien 33383, Taiwan Trade Name ： PHIHONG Model Number ： RCA-RFM(BL) Test Specification ： FCC 47 CFR PART 15 SUBPART C: Oct., 2012 ANSI C63.4-2009 Receive Date ： Jul. 22, 2013 Test Period ： Sep. 09, 2013 Issue Date ： Oct. 09, 2013 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1308FR17-01 1 of 21 Revision History Rev. Issue Date Revisions Revised By 00 Sep. 18, 2013 Initial Issue 01 Oct. 09, 2013 Revised report information. Joyce Liao A Test Lab Techno Corp. Report Number: 1308FR17-01 2 of 21 Verification of Compliance Issued Date: 10/09/2013 Product Type : RF module Applicant : PHIHONG TECHNOLOGY CO LTD Address : No. 568, Fu Xing 3rd Rd., GuiShan, Tao Yuan Hsien 33383, Taiwan Trade Name : PHIHONG Model Number : RCA-RFM(BL) FCC ID : 2AARNRCARFMBL EUT Rated Voltage : DC 5 ~12V Test Voltage : DC 5V Applicable Standard : FCC 47 CFR PART 15 SUBPART C: Oct., 2012 ANSI C63.4-2009 Test Result : Complied Application Purpose : Original Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247 . The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Cran Yang) (Testing Engineer) (Fly Lu) A Test Lab Techno Corp. Report Number: 1308FR17-01 3 of 21 TABLE OF CONTENTS 1 General Information ....................................................................................................................................... 5 1.1. Summary of Test Result ...................................................................................................................... 5 1.2. Measurement Uncertainty ................................................................................................................... 5 2 EUT Description ............................................................................................................................................. 6 3 Test Methodology .......................................................................................................................................... 7 3.1. Mode of Operation .............................................................................................................................. 7 3.2. EUT Exercise Software....................................................................................................................... 7 3.3. Configuration of Test System Details .................................................................................................. 7 3.4. Test Site Environment ......................................................................................................................... 7 4 Radiated Interference Measurement ............................................................................................................ 8 4.1. Limit..................................................................................................................................................... 8 4.2. Test Instruments .................................................................................................................................. 9 4.3. Setup ................................................................................................................................................. 10 4.4. Test Procedure ...................................................................................................................................11 4.5. Test Result ........................................................................................................................................ 13 5 Band Edges Measurement .......................................................................................................................... 17 5.1. Limit................................................................................................................................................... 17 5.2. Test Setup ......................................................................................................................................... 17 5.3. Test Instruments ................................................................................................................................ 17 5.4. Test Procedure .................................................................................................................................. 18 5.5. Test Result ........................................................................................................................................ 19 6 Antenna Measurement................................................................................................................................. 21 6.1. Limit...............…

Text truncated - open the document above for the full version.

Part 15C Test Setup Photographs Radiated Emissions Test Configuration: Below 1GHz _ Front View Below 1GHz _ Rear View A Test Lab Techno Corp. Report Number: 1308FR17-01 1 of 3 Above 1GHz _ Front View Above 1GHz _ Rear View A Test Lab Techno Corp. Report Number: 1308FR17-01 2 of 3 Close View A Test Lab Techno Corp. Report Number: 1308FR17-01 3 of 3