2AASMZB-7Wireless Headphones

VEP-024-ZB7-B Wireless Headphones ZB-7 Veho Global Group, PO Box 436, Southampton, SO30 9DH, UK Veho Europe, 25 Place de la Madeleine, 75008 Paris FCC ID: 2AASMZB-7 This symbol, affixed to the product or its packaging, indicates that the product must not be processed as household waste. This product should be correctly disposed of according to your local guidelines for electrical and battery operated products. Correct disposal of the battery will avoid potential harm to the environment and human health. For further information regarding the recycling of this product, please contact your local waste recycling centre. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by VEHO GLOBAL GROUP LIMITED is under license. Other trademarks and trade names are those of their respective owners. VEP-024-ZB7-B_Manual (80 x 80).indd 1,3VEP-024-ZB7-B_Manual (80 x 80).indd 1,314/02/2023 16:0214/02/2023 16:02 5 English 6 Français 20 Español 34 Italiano 48 Deutsche 62 Dansk 76 Português 90 中文 104 日本語 118 Contents VEP-024-ZB7-B_Manual (80 x 80).indd 4-5VEP-024-ZB7-B_Manual (80 x 80).indd 4-514/02/2023 16:0214/02/2023 16:02 67 1. Power button 2. Power status LED 3. Microphone 4. 2.5mm audio port 5. Active noise cancelling 6. Active noise cancelling LED 7. Volume + / Next track 8. Volume - / Previous track 9. USB-C charging port 10. Charging status LED Guide to the headphones EN 4 9 10 2 3 5 6 7 1 8 VEP-024-ZB7-B_Manual (80 x 80).indd 6-7VEP-024-ZB7-B_Manual (80 x 80).indd 6-714/02/2023 16:0214/02/2023 16:02 89 EN Charging the headphones Connect the supplied USB-C cable to the headphones and then into a compatible 5V⎓1A power source. The status LED will show solid red when charging, turning blue when fully charged. When the battery is low, a warning tone will sound every 3 minutes. Charging VEP-024-ZB7-B_Manual (80 x 80).indd 8-9VEP-024-ZB7-B_Manual (80 x 80).indd 8-914/02/2023 16:0214/02/2023 16:02 1011 5 secs EN Pairing with a device Ensure the headphones are off. Press and hold the power button for 5 seconds, and wait until a ‘Pairing’ tone sounds and the power status LED flashes red/blue. Select ‘Veho ZB-7’ from the Bluetooth ® menu on your device. Pairing ‘Veho ZB-7’ VEP-024-ZB7-B_Manual (80 x 80).indd 10-11VEP-024-ZB7-B_Manual (80 x 80).indd 10-1114/02/2023 16:0214/02/2023 16:02 1213 EN Using the Line-in cable Connect the supplied 2.5mm audio cable from the headphone audio port to your device. The headphones will default to line-in mode whilst the audio cable is connected. Line-in cable VEP-024-ZB7-B_Manual (80 x 80).indd 12-13VEP-024-ZB7-B_Manual (80 x 80).indd 12-1314/02/2023 16:0214/02/2023 16:02 1415 Power on/off Press and hold the power button for 3 seconds to turn on, the power status LED will flash blue. Press and hold the power button for another 3 seconds to turn off, the power status LED will flash red. Play/pause Press the power button once to play and once again to pause. Volume up/Next track Press the (+) button for 2 seconds to skip to the next track. Press once to increase the volume. Volume down/Previous track Press and hold the (-) button for 2 seconds to skip to the previous track. Press once to reduce the volume. Voice assistant Simultaneously press and hold the volume + and volume - buttons for 2 seconds. Active Noise Cancelling (ANC) Press the ANC button once to change modes between on/off/ambient mode. Active Noise Cancellation uses the microphone and speakers to reduce background and surrounding noises. Bass control Press and hold the ANC button for 2 seconds to change modes between bass up/normal. Multipoint connection Pair the headphones to a Bluetooth ® device, disable Bluetooth ® on this device and repeat pairing instructions with a second device. Multipoint connection allows the headphones to maintain simultaneous connections with two source devices. Functions EN VEP-024-ZB7-B_Manual (80 x 80).indd 14-15VEP-024-ZB7-B_Manual (80 x 80).indd 14-1514/02/2023 16:0214/02/2023 16:02 1617 EN Reset Ensure the headphones are disconnected from devices. Simultaneously press and hold the power and volume - buttons for 5 seconds. Answering/ending calls Press the power button once to answer an incoming call. Press once again to end the call. Rejecting calls Press and hold the power button for 2 seconds to reject an incoming call. Call mute/unmute Press and hold the volume + button for 3 seconds. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Call switch Simultaneously press and hold the volume + and volume - buttons for 2 seconds during a call to switch between the headphones and mobile device. Number redial Double click the power button to redial the most recent contact on your call log. VEP-024-ZB7-B_Manual (80 x 80).indd 16-17VEP-024-ZB7-B_Manual (80 x 80).indd 16-1714/02/20…

Text truncated - open the document above for the full version.

Veho Global Group Agent Authorization Company: Veho Global Group Address: Building 3, Flanders Business Park, Flanders Road, Hedge End, Southampton SO30 2FZ, Southampton, United Kingdom Product Name: Wireless Headphones Model Number(s): ZB-7, VEP-024-ZB7-B, VEP-025-ZB7-W, VEP-465-NEB-A Product Description: Wireless Headphones We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-01-14 Name: Sarah Farquharson Company: Veho Global Group

Veho Global Group Building 3, Flanders Business Park, Flanders Road, Hedge End, Southampton SO30 2FZ, Southampton, United Kingdom Mar.02, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AASMZB-7 Model Number: ZB-7, VEP-024-ZB7-B, VEP-025-ZB7-W, VEP-465-NEB-A To Whom It May Concern: We, The Veho Global Group hereby declare that the models are identical except the model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Sarah Farquharson

Report No.: AGC07240221201AP02 Page 1 of 3 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC07240221201AP02 Page 2 of 3 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC07240221201AP02 Page 3 of 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 3mm&15mm FCC ID: 2AASMZB-7

Report No.: AGC07240221201AP02 Page 1 of 6 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) VIEW OF BATTERY Report No.: AGC07240221201AP02 Page 2 of 6 ANTENNA CLOSE-UP PHOTO-1 INTERNAL VIEW OF EUT (FIGURE 1) BT Antenna Report No.: AGC07240221201AP02 Page 3 of 6 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC07240221201AP02 Page 4 of 6 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC07240221201AP02 Page 5 of 6 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC07240221201AP02 Page 6 of 6 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) ****************************************End of Report****************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Wireless Headphones Test Model ZB-7 Series Model VEP-024-ZB7-B, VEP-025-ZB7-W, VEP-465-NEB-A FCC ID 2AASMZB-7 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BR/EDR P t =0.533dBm=1.13mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(1.13mW /5mm) .[√2.480GHz)]=0.35<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. .5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

ManufacturerCN :DongguanWeCXW Co.,Ltd. Model No. SM-BT736-MAIN_PCBA Antenna type ：PCB Antenna Antenna size ： 5.5*14.8mm Passive Test For WIFI2.4 FreqEffiEffiGainGainMaxMinAttenutAttenut (MHz)(%%)(dB)(dBi)(dBd)(dB)(dB)HorVer 240022.47-6.48-1.88-4.03-1.88-23.9753.2852.56 241021.62-6.65-2.03-4.18-2.03-25.4253.3452.58 242021.12-6.75-1.92-4.07-1.92-26.253.4552.63 243020.53-6.88-1.94-4.09-1.94-27.5253.3352.73 244019.94-7-1.79-3.94-1.79-26.0753.3752.78 245020.67-6.85-1.28-3.43-1.28-26.5253.4653.02 246019.91-7.01-1.41-3.56-1.41-27.6353.4752.9 247020.26-6.93-1.09-3.24-1.09-27.5153.5452.93 248019.98-6.99-1.14-3.29-1.14-27.9153.5452.79 249019.91-7.01-1.04-3.19-1.04-25.3153.5452.88 250020.52-6.88-0.9-3.05-0.9-21.653.5252.85

Page 1 of 67 FCC Test Report Report No.: AGC07240221201FE03 FCC ID : 2AASMZB-7 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Headphones BRAND NAME : Veho MODEL NAME : ZB-7, VEP-024-ZB7-B, VEP-025-ZB7-W, VEP-465-NEB-A APPLICANT : Veho Global Group DATE OF ISSUE : Dec. 14, 2022 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC07240221201FE03 Page 2 of 67 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 14, 2022 Valid Initial Release Report No.: AGC07240221201FE03 Page 3 of 67 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. RECEIVER INPUT BANDWIDTH .............................................................................................................. 7 2.4. EXAMPLE OF A HOPPING SEQUENCY IN DATA MODE ......................................................................... 7 2.5. EQUALLY AVERAGE USE OF FREQUENCIES AND BEHAVIOUR ......................................................... 7 2.6. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.7. TEST METHODOLOGY ............................................................................................................................. 8 2.8. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.9. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.10. ANTENNA REQUIREMENT..................................................................................................................... 8 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 9 4. DESCRIPTION OF TEST MODES ................................................................................................................. 10 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 11 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 11 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 11 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 11 6. TEST FACILITY .............................................................................................................................................. 12 7. PEAK OUTPUT POWER ................................................................................................................................ 13 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 13 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 13 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 14 8. 20DB BANDWIDTH ........................................................................................................................................ 19 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 19 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 19 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 20 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 25 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 25 Report No.: AGC07240221201FE03 Page 4 of 67 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 25 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 25 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 25 10. RADIATED EMISSION ................................................................................................................................. 46 10.1. MEASUREMENT PROCEDURE ........................................................................................................... 46 10.2. TEST SETUP ......................................................................................................................................... 48 10.3. LIMITS AND MEASUREMENT RESULT ............................................................................................... 49 10.4. TEST RESULT........................................................................................................................................ 49 11. NUMBER OF HOPPING FREQUENCY ...............................................…

Text truncated - open the document above for the full version.

Report No.: AGC07240221201AP01 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC07240221201AP01 Page 2 of 2 RF CONDUCTED TEST SETUP ****************************************End of Report*************************************