2AAV8QS-17ABWLaser & LED Combo Light (with Bluetooth)

User’s Guide Model: Sky® Lite 2.0 Sky® Lite 2.0 Laser Projector Please ONLY use manufacturer-provided USB cord and adapter. LASER RADIATION DO NOT STARE INTO THE BEAM CLASS 2 LASER PRODUCT Diode Laser - Max. Output < 1 mW Wavelength 400-700 nm EC 62472 Risk Group 1 Classified per IEC 60825-1 Ed. 3.0.2014 TABLE OF CONTENTS Notice ..............................................................................................................................1 Introduction ..................................................................................................................2 Before You Begin ..........................................................................................................2 Parts List ..........................................................................................................................2 Setting up the Laser Projector ................................................................................3 Default Settings ...........................................................................................................3 Installation Tips ............................................................................................................4 Product Specifications ...............................................................................................4 Limited Warranty .........................................................................................................5 Caution ............................................................................................................................5 Cleaning Instructions .................................................................................................5 Disposal...........................................................................................................................5 1 NOTICE CAUTION—Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product is classified as a Class 2 laser product and complies with the applicable parts of IEC/EN 60825-1 Ed. 2.0:2007 and Ed. 3.0:2014. The manufacturer additionally certifies it complies with the US FDA Federal Laser Product Performance Standard (FLPPS) provided in 21 CFR Subchapter J, 1040.10 and 1040.11 except for allowable deviations specified in FDA Guidance documents. Do not stare into the beams emitted from the product. Intentional long term viewing of CLASS 2 levels of laser light can be hazardous. This product uses diffractive optics to scatter the beam energy. This scattering effect causes the energy concentration to drop below the exposure limits for momentary or accidental viewing at a relatively short distance from the laser aperture. As with all bright light-sources, when you operate this device in unsupervised general public areas, it is recommended that up-close access to the light be restricted or prevented and the beams be directed into locations were persons are not expected. This laser display device incorporates a CLASS 3B laser system which, by itself, may be hazardous. However, this laser display product incorporates a protective housing and diffractive optics in its design so that there is no exposure or human access to laser radiation during operation above the CLASS 2 limits. Each individual laser beamlet’s power is below the Class 2 limit of 1 mW. UNDER NO CIRCUMSTANCES shall attempts be made to open the protective housing or operate the device if the aperture window is damaged. All service to this laser display device requiring the protective housing to be opened and/ or removed shall be performed by service personnel or their authorized agents. Opening the protective housing voids the warranty. NO LASERS SHOULD BE POINTED INTO THE SSKY WITHIN 10 NAUTICAL MILES (18.5 km) OF AN AIRPORT. IF YOU ARE LOCATED WITHIN THIS SPECIFIC PERIMETER, WE RECOMMEND THE LASERS BE POINTED DOWN AT THE GROUND SO NO STRAY BEAMS ARE PROJECTED INTO THE AIR. CHECK WITH YOUR LOCAL AIRPORT OR PROVINCIAL GUIDELINES FOR FURTHER INFORMATION. 2 IMPORTANT NOTE: Use only manufacturer-provided adapter. Use of 3rd party adapters may damage the unit and void the warranty. INTRODUCTION Thank you for purchasing the BlissLights Sky® Lite 2.0 Laser Galaxy Projector. This product is a unique indoor light fixture that uses patented laser and holographic technology to project thousands of moving pin-points of light against a transforming nebula cloud. Sleep under the stars, create a romantic starlit dinner, or take your home entertainment center to the next level. We hope you enjoy this incredibly unique lighting experience. Each unit provides up to 30 x 30 ft of coverage. It has maximum electrical usage of less than 5 Watts and operates in temperatures between 14°F to 95°F (-10°C to 40°C). BEFORE YOU BEGIN Immediately upon receiving the fixture, carefully unpack and check the carton contents to ensure that all parts are present and in good condition. Notify the retailer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture must be returned, it is important that the fixture be returned in the original factory box. Please see parts list below for box contents. PARTS LIST: 1) Laser Projector 2) USB C Power Cord 3) USB Wall Adapter 1 2 3 3 Before operating your laser projector, please read the “Before you Begin” section and “Notice” section of this user’s guide. SETTING UP THE LASER PROJECTOR 1. Remove protective film sticker from laser aperture. 2. Insert the USB power cord into a powered USB port or us…

Text truncated - open the document above for the full version.

SHENZHEN QIAOHUA INDUSTRIES LIMITED

SHENZHENQIAOHUAINDUSTRIESLIMITED Manager 2021-1-5 To: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD Subject:PermanentConfidentialityRequestforFCCID:2AAV8QS-17ABW Pursuanttosections0.457and0.459ofCFR47,werespectfullyrequestpermanent confidentialtreatmentofthefollowingExhibitsaccompanyingthisapplicationas: BlockDiagram Schematics OperationalDescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleased tothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantand provideunjustifiedbenefitstoitscompetitors. Theapplicantunderstandsthatdisclosureofthisapplicationandallaccompanying documentationwillnotbemadebeforethedateoftheGrantforthisapplication. Sincerely, Signature: Name&title: Tel:0755-33210502 E-mail:[email protected]

External photo of EUT External photo of EUT External photo of EUT External photo of EUT External photo of EUT

55mm 24mm 日期码及对应数量根据附件表格 Laser&LED Combo Light (with Bluetooth APP) Model: 900-00057_A Rating: DC 5V,1A,5W CONFORMS TO UL CERTIFIED TO CSA STD.C22.2 NO.250.4 FCC ID: 2AAV8QS-17ABW 131DA SCAN TO DOWNLOAD APP Laser&LED Combo Light (with Bluetooth APP) Model: 900-00057_A Rating: DC 5V,1A,5W CONFORMS TO UL CERTIFIED TO CSA STD.C22.2 NO.250.4 131DA FCC ID: 2AAV8QS-17ABW SCAN TO DOWNLOAD APP FCC ID: 2AAV8QS-17ABW 22mm 3mm STD.962 STD.962 位置： Laser&LED Combo Light (with Bluetooth APP) Model: 900-00057_A Rating: DC 5 V , 1A ,5W C O N F O R M S TO UL CERTIFIED TO CSA STD .C22.2 NO .250.4 FC C ID: 2 A A V 8 Q S - 1 7 A B W 131DA SCAN TO DOWNL OAD APP STD . 962

Internal photo of EUT Internal photo of EUT Internal photo of EUT

SHENZHEN QIAOHUA INDUSTRIES LIMITED TEST REPORT SCOPE OF WORK: FCC 1.1310 – Maximum Permissible Exposure report Model: QS-17ABW, 900-00059_A, QS-17AGW, 900-00060_A QS-27LW, 900-00061_A, QS-17ABG, 900-00057_A QS-17AGG, 900-00058_A, QS-27LG, 900-00062_A REPORT NUMBER 201200433TWN-001 ISSUE DATE Feb. 19, 2021 PAGES 12 DOCUMENT CONTROL NUMBER GFT-OP-10h (28-Nov-2018) © 2020 Intertek Report No.: 201200433TWN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. GFT-OP-10h (28-Nov-2018) Page 1 of 12 Test Report Maximum Permissible Exposure (MPE) Evaluation Report Applicant: SHENZHEN QIAOHUA INDUSTRIES LIMITED Room 301, No. 1building, Qiaohua Industrial Park, Luotian forestry center, Yanchuan, Yanluo town, Bao An Shenzhen, China 518127 Product: Laser & LED Combo Light (with Bluetooth) Model No.: QS-17ABW, 900-00059_A, QS-17AGW, 900-00060_A QS-27LW, 900-00061_A, QS-17ABG, 900-00057_A QS-17AGG, 900-00058_A, QS-27LG, 900-00062_A FCC ID: 2AAV8QS-17ABW Test Method/ Standard: FCC 1.1310 KDB 447498 Test By: Intertek Testing Services Taiwan Ltd., Hsinchu Laboratory No. 11, Lane 275, Ko-Nan 1 Street, Chia-Tung Li, Shiang-Shan District, Hsinchu City, Taiwan Zero Chen Engineer Durant Wei Reviewer Report No.: 201200433TWN-001 GFT-OP-10h (28-Nov-2018) Page 2 of 12 TEST REPORT Revision History Report No. Issue Date Revision Summary 201200433TWN-001 Feb. 19, 2021 Original report Report No.: 201200433TWN-001 GFT-OP-10h (28-Nov-2018) Page 3 of 12 TEST REPORT Table of Contents Summary of Tests ....................................................................................................................... 4 1. General Information ............................................................................................................... 5 1.1 Identification of the EUT .................................................................................................. 5 1.2 Adapter information ......................................................................................................... 5 1.3 Additional information about the EUT ............................................................................. 5 1.4 Antenna description ......................................................................................................... 6 1.5 Peripherals equipment ..................................................................................................... 6 2. Test specifications ................................................................................................................... 7 2.1 Introduction ...................................................................................................................... 7 2.2 RF Exposure Limit ............................................................................................................. 8 2.3 RF Exposure calculations ................................................................................................ 10 2.4 Operation mode ............................................................................................................. 10 2.5 Test equipment ............................................................................................................... 11 2.6 Test Set-up ...................................................................................................................... 11 3. Test results ............................................................................................................................ 12 Report No.: 201200433TWN-001 GFT-OP-10h (28-Nov-2018) Page 4 of 12 TEST REPORT Summary of Tests MPE Evaluation meet FCC OET No. 65: 1997, IEEE C95.1-2005 Test Reference Results MPE Evaluation FCC Guidelines for Human Exposure IEEE C95.1 Complies Note: Please note that the test results with statement of conformity, the decision rules which are based on: Safety Testing: the specification, standard or IEC Guide 115. Other Testing: the specification, standard and not taking into account the measurement uncertainty. Report No.: 201200433TWN-001 GFT-OP-10h (28-Nov-2018) Page 5 of 12 TEST REPORT 1. General Information 1.1 Identification of the EUT Product: Laser & LED Combo Light (with Bluetooth) Model No.: QS-17AGW Operating Frequency: 2402 MHz ~ 2480 MHz Channel Number: 40 channels Rated Power: DC 5V from adapter Power Cord: N/A Sample receiving date: 2020/09/21 Sample condition: Workable Test Date(s): 2021/02/05 1.2 Adapter information The EUT will be supplied with a power supply from below list: No. Model no. Specification Adapter YB052-0501000U1-2A2 I/P: 100-240Vac, 50/60Hz, 0.2A O/P: 5Vdc, 1A 1.3 Additional information about the EUT The customer confirmed the models listed as below were series model to model QS-17AGW (EUT), the difference between main model and series model are listed as below. No. Model for Quhwa Model for BlissLights LLC Color of Housing Color of Laser 1 QS-17ABG 900-00057_A Grey Blue 2 QS-17ABW 900-00059_A White 3 QS-17AGG 900-00058_A Grey Green 4 QS-17AGW 900-00060_A White 5 QS-27LG 900-00062_A Grey No laser module 6 QS-27LW 900-00061_A White For more detail features, please refer to user's Manual. Report…

Text truncated - open the document above for the full version.

SHENZHEN QIAOHUA INDUSTRIES LIMITED TEST REPORT SCOPE OF WORK: 47 CFR FCC Part 15.247 – Radio Spectrum report Model: QS-17ABW, 900-00059_A, QS-17AGW, 900-00060_A QS-27LW, 900-00061_A, QS-17ABG, 900-00057_A QS-17AGG, 900-00058_A, QS-27LG, 900-00062_A REPORT NUMBER 201200432TWN-001 ISSUE DATE Feb. 19, 2021 PAGES 46 DOCUMENT CONTROL NUMBER GFT-OP-10h (28-Nov-2018) © 2020 Intertek Report No.: 201200432TWN-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. GFT-OP-10h (28-Nov-2018) Page 1 of 46 Test Report 0597 Radio Spectrum TEST REPORT Applicant: SHENZHEN QIAOHUA INDUSTRIES LIMITED Room 301, No. 1building, Qiaohua Industrial Park, Luotian forestry center, Yanchuan, Yanluo town, Bao An Shenzhen, China 518127 Product: Laser & LED Combo Light (with Bluetooth) Model No.: QS-17ABW, 900-00059_A, QS-17AGW, 900-00060_A QS-27LW, 900-00061_A, QS-17ABG, 900-00057_A QS-17AGG, 900-00058_A, QS-27LG, 900-00062_A FCC ID: 2AAV8QS-17ABW Test Method/ Standard: 47 CFR FCC Part 15.247 & ANSI C63.10 2013 KDB 558074 D01 v05r02 Test By: Intertek Testing Services Taiwan Ltd., Hsinchu Laboratory No. 11, Lane 275, Ko-Nan 1 Street, Chia-Tung Li, Shiang-Shan District, Hsinchu City, Taiwan Zero Chen Engineer Durant Wei Reviewer Report No.: 201200432TWN-001 GFT-OP-10h (28-Nov-2018) Page 2 of 46 TEST REPORT Revision History Report No. Issue Date Revision Summary 201200432TWN-001 Feb. 19, 2021 Original report Report No.: 201200432TWN-001 GFT-OP-10h (28-Nov-2018) Page 3 of 46 TEST REPORT Table of Contents 1. General Information ............................................................................................................... 6 1.1 Identification of the EUT .................................................................................................. 6 1.2 Adapter information ......................................................................................................... 6 1.3 Additional information about the EUT ............................................................................. 6 1.4 Antenna description ......................................................................................................... 7 1.5 Operation mode ............................................................................................................... 7 1.6 Peripherals equipment ..................................................................................................... 7 2. Minimum 6 dB Bandwidth ..................................................................................................... 8 2.1 Instrument Setting ............................................................................................................ 8 2.2 Test Procedure .................................................................................................................. 8 2.3 Test Diagram ..................................................................................................................... 8 2.4 Limit .................................................................................................................................. 8 2.5 Operating Environment Condition ................................................................................... 8 2.6 Test Results ....................................................................................................................... 9 3. Maximum Peak Conducted Output Power ........................................................................... 12 3.1 Instrument Setting .......................................................................................................... 12 3.2Test Procedure ................................................................................................................. 12 3.3 Test Diagram ................................................................................................................... 12 3.4 Limit ................................................................................................................................ 12 3.5 Operating Environment Condition ................................................................................. 12 3.6 Test Results ..................................................................................................................... 13 4. Power Spectral Density ......................................................................................................... 14 4.1 Instrument Setting .......................................................................................................... 14 4.2 Test Procedure ................................................................................................................ 14 4.3 Test Diagram ................................................................................................................... 14 4.4 Limit ................................................................................................................................ 14 4.5 Operating Environment Condition ................................................................................. 14 4.6 Test Results ..............................................…

Text truncated - open the document above for the full version.

Conducted Emission Test set-up photo

Radiated Emission Test set-up photo 9kHz~30MHz Radiated Emission Test set-up photo 30MHz~1GHz Radiated Emission Test set-up photo Above 1GHz