2AAVF-41174Walkie Talkie

Position Magnifying Lens to zoom in on objects. Size: 5.875” x 8” Color: Black Press button to flash LED Signal Light. (See Morse Code key on Spy Ninjas ID Card.) After installing batteries, turn Power Switch from OFF to ON. Carry small items in the Secret Message Compartment. Store Ninja Discs in Firing Slot and Reserve Slot. PRESS and HOLD button to talk. RELEASE to listen. (NOTE: PRESS and HOLD, then WAIT for 1 second, and THEN begin speaking.) COVERT COMMUNICATORS © 2021 DAVCHY IP HOLDINGS, LLC ©2021 Playmates. Playmates International Company Ltd. 23/F, The Toy House, 100 Canton Road, TST, Kowloon, Hong Kong. PRINTED IN CHINA. Please keep all relative information for further reference. Ages 6 and up Item #41174 / Item #41192 SN-23 Distributor - US Market Only Playmates Toys Inc. 909 N. Pacific Coast Highway, Ste 800 El Segundo, CA 90245 Email: [email protected] OFF ON MIC Press button to fire Ninja Disc. WARNING: Do not aim at eyes or face. Do not use projectiles other than those provided with this toy. Each Communicator requires 1 9V battery. (Batteries not included) Magnifying Lens and Compass will function best when removed from the Communicator. Fasten velcro strap around wrist. Adjust to fit securely without discomfort. Hold steady and Compass will indicate North (when removed from Communicator and away from magnets or metal). If Compass freezes, shake slightly to unstick the needle. If Covert Communicators are not working, try replacing the batteries. To change batteries: • Unscrew battery cap. • Take out old batteries and replace with 1new 9V battery. • Replace battery cap. Size: 11.75” x 8” Color: Black Battery Instructions: • Non-rechargeable batteries are not to be recharged. • Different types of batteries or new and used batteries are not to be mixed. • Only batteries of the same or equivalent type as recommended are to be used. • Batteries are to be inserted with the correct + and - polarity. • Exhausted batteries are to be removed from the toy. • The supply terminals are not to be short-circuited. • Batteries are to be removed from the toys when not in use. • Do not dispose of batteries in fire. • Do not use rechargeable batteries. • For electric toys using rechargeable batteries, the batteries should be charged under adult supervision. • Batteries are only to be charged by persons of at least 8 years old. Adult supervision is required to replace batteries. Batteries Regulation: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Under the environment with severe electrostatic discharge, the product may malfunction and requires user reset. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio TV technician for help. This radio should transmit no more than 50% duty cycle of the time. This radio should be held 25 mm from the user’s face. For wrist worn operation, this radio has been tested and meet the FCC RF exposure requirements when used with the accessories supplied for this radio. Use of other accessories may not ensure compliance with FCC RF exposure requirements. OFF ON

41174 walkie talkie Y342 1 of 1LUNG CHEONG SHEET:APPROVED BY:DRAWING BY:DESIGN BY: DWG NO: FUNCTION: TITLE: longdanyu 2021-06-01V1.0 Y342 BLOCK DIAGRAM 462.5625MHZ Y1 21.25M ANTA MIC1 SPK D2 1 2 3 4 6 5 78910 H130 RF 1 3 45 2 LDO LN1173 3V 1 2 9V BAT 1 2 3 H132 MCU K3 TALK

Playmates Toys Inc. ___________________________________________________________ Letter of Agency I, an officer of Playmates Toys Inc. do hereby authorize Intertek Testing Services (Mr. Tim Lee/ Herbert Wong / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 95 of the FCC Rules until further notice. I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. Date: June 17, 2021 By _________________ Signature Alex Yau _ Printed Name QA Director _ Title

Page 1 of 3 FCC ID: 2AAVF-41174 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 3 FCC ID: 2AAVF-41174 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 3 FCC ID: 2AAVF-41174 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

© DAVCHY 2021 Playmates 100 Canton Rd TST HK Item 41174/41192 China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition s: (1) this device may not cause harmful interference, and (2) this device must accept any interference receiv ed, including interference that may cause undesired ope ration. 9V BATTERY © DAVCHY 2021 Playmates 100 Canton Rd TST HK Item 41174/41192 China This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condition s: (1) this device may not cause harmful interference, and (2) this device must accept any interference receiv ed, including interference that may cause undesired ope ration. 9V BATTERY © DAVCHY 2021 Playmates 100 Canton Rd TST HK Item 41174/41192 China This device complies with Part 15 of the FCC Rules.Operation is subject to the following two condition s: (1) this device may not cause harmful interference, and (2) this device must accept any interference receiv ed, including interference that may cause undesired ope ration. ON OFF FCC ID:2AAVF-41174 FCC ID:2AAVF-41174 ON OFF FCC ID:2AAVF-41174

Page 1 of 2 FCC ID: 2AAVF-41174 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 2 FCC ID: 2AAVF-41174 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Antenna

COVERT COMMUNICATORS COVERT COMMUNICATORSCOVERT COMMUNICATORS COVERT COMMUNICATORS ( (( (462.5625M 462.5625M462.5625M 462.5625MHz HzHz Hz) )) ) OPERATION PRINCIRLE OPERATION PRINCIRLEOPERATION PRINCIRLE OPERATION PRINCIRLE COVERT COMMUNICATORS uses 462.5625MHz to communicate. The product has transmitting and receiving functions. Press the intercom button to transmit sound to another intercom via the microphone, and press the LED button to emit white LED light. Circuits’composition: Power circuit, microphone circuit, control circuit, 462.5625MHz module, LED circuit. Power circuit: SW1,C3,C7，C52,C52，PTC,R4，U7 1. control circuit : K3，MCU2 ，Q1，R3，R58，R59，C6 2. 462.5625MHz module: IC1，Y1，C5，C32，C33，C28，C8，C11，C10，C31，R2，R36，R32，L2，L13 3. microphone circuit: MIC1 ，R10,R5，C2，C4，C17，C30 4. LED circuit: SW2,R7,D2 5.Antennas meet the following requirements of FCC Part 95 Section 95.587(b) : A. The gain of the antenna does not exceed that of the half-wave dipole antenna. B. The antenna is designed so that the electric field of the transmitted wave is vertically polarized when the unit is operating in the normal direction.

Tune-up procedure Each device is individually calibrated during manufacturing. Measurement is performed in a full calibrated setup. Measurement procedure is outlined below: 1. Set the device to operational voltage and on a predefined band class and channel. 2. The maximum output power is measured when the power control bit is set as all UP bits. The RF output power will be adjusted equal or lower than tested power shown in the test report. The user has no possibility to change these settings. Tune up procedure shall be over the power range or at specific operating power levels. 1. It must provide an operational voltage to turn on the device and on one certain channel in service mode by means of company proprietary software. 2. The Base station simulator measures the device specific RF characteristics. 3. The maximum gains of each individual device are adjusted until the target value met. Conducted Power Table Channel Mode Target Power (dBm) Tolerance (dBm) 462.5625 FRS 8.5 (-0.5,+0.5)

Page 1 of 23 Report No.: 210512004SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 FCC SAR Test Report Product : SPY NINJAS COVERT COMMUNICATORS Trade mark : Spy Ninja Model/Type reference : 41174 Report Number : 210512004SAR-1 Date of Issue : Jun. 30, 2021 FCC ID : 2AAVF-41174 Test Standards : FCC 47 CFR Part 2 §2.1093 ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Test result : PASS Prepared for: Playmates Toys Inc. 22/F., The Toy House, 100 Canton Road, Tsimshatsui, Kowloon, Hong Kong Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: Charley Wu Project Engineer Henry Lu Team Leader Approved by: Date: Jun. 30, 2021 Kevin Liang Assistant Manager Page 2 of 23 Report No.: 210512004SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 Version Version No. Date Description V1.0 Jun. 30, 2021 Original Page 3 of 23 Report No.: 210512004SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com UTTR-SAR-IEEE Std 1528-2013-V1.1 Contents Page 1 GENERAL INFORMATION ............................................................................................................................. 4 1.1 STATEMENT OF COMPLIANCE .......................................................................................................... 4 1.2 EUT DESCRIPTION .............................................................................................................................. 4 1.2.1 General Description ...................................................................................................................... 4 1.3 MAXIMUM CONDUCTED POWER ...................................................................................................... 4 1.4 OTHER INFORMATION ........................................................................................................................ 5 1.5 TESTING LOCATION ........................................................................................................................... 5 1.6 TEST FACILITY .................................................................................................................................... 5 1.7 GUIDANCE STANDARD ...................................................................................................................... 6 2 SPECIFIC ABSORPTION RATE (SAR) .......................................................................................................... 7 2.1 INTRODUCTION ................................................................................................................................... 7 2.2 SAR DEFINITION .................................................................................................................................. 7 2.3 SAR LIMITS .......................................................................................................................................... 7 3 SAR MEASUREMENT SYSTEM .................................................................................................................... 8 3.1 SPEAG DASY SYSTEM ....................................................................................................................... 8 3.1.1 Robot ............................................................................................................................................ 8 3.1.2 Probe ............................................................................................................................................ 9 3.1.3 Data Acquisition Electronics (DAE) .............................................................................................. 9 3.1.4 Phantom ..................................................................................................................................... 10 3.1.5 Device Holder ..............................................................................................................................11 3.2 SAR SCAN PROCEDURE .................................................................................................................. 12 3.2.1 SAR Reference Measurement (drift) .......................................................................................... 12 3.2.2 Area Scan ................................................................................................................................... 12 3.2.3 Zoom Scan ................................................................................................................................. 12 3.2.4 SAR Drift Measurement.............................................................................................................. 13 3.3 TEST EQUIPMENT ............................................................................................................................. 14 3.4 MEASUREMENT UNCERTAINTY ...................................................................................................... 15 3.5 TISSUE DIELECTRIC PARAMETER MEASUREMENT & SYSTEM VERIFICATION ...................... 16 3.5.1 Tissue Simulating Liquids ..........................................................…

Text truncated - open the document above for the full version.

System Performance Check-Head 450MHz DUT: D450V3; Type: D450V3; Serial: 1102 Date: 2021-06-07 Communication System: UID 0, A-CW (0); Frequency: 450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 450 MHz; σ = 0.827 S/m; ε r = 41.891; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.5°C;Liquid Temperature:22.3°C; DASY Configuration:  Probe: EX3DV4 - SN3842; ConvF(10.09, 10.09, 10.09) @ 450 MHz; Calibrated: 1/25/2021  Sensor-Surface: 1.4mm (Mechanical Surface Detection)  Electronics: DAE4 Sn1549; Calibrated: 3/23/2021  Phantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078  DASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Head/d=15mm, Pin=250mW, dist=1.4mm/Area Scan (51x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.73 W/kg Head/d=15mm, Pin=250mW, dist=1.4mm /Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 44.97 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 2.07 W/kg SAR(1 g) = 1.26 W/kg; SAR(10 g) = 0.844 W/kg Maximum value of SAR (measured) = 1.76 W/kg 0 dB = 1.76 W/kg = 2.46 dBW/kg

Date: 6/7/2021 Front of face Communication System: UID 0, Analog (0); Frequency: 462.563 MHz;Duty Cycle: 1:1 Medium parameters used: f = 463 MHz; σ = 0.832 S/m; ε r = 41.711; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.6°C;Liquid Temperature:22.4°C; DASY Configuration: lProbe: EX3DV4 - SN3842; ConvF(10.09, 10.09, 10.09) @ 462.563 MHz; Calibrated: 1/25/2021 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/23/2021 lPhantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Front of face/CH 4/Area Scan (71x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.00478 W/kg Front of face/CH 4/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 1.916 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.00456 W/kg SAR(1 g) = 0.00259 W/kg; SAR(10 g) = 0.0017 W/kg Maximum value of SAR (measured) = 0.00368 W/kg 0 dB = 0.00368 W/kg = -24.34 dBW/kg Date: 6/7/2021 Body worn Communication System: UID 0, Analog (0); Frequency: 462.563 MHz;Duty Cycle: 1:1 Medium parameters used: f = 463 MHz; σ = 0.832 S/m; ε r = 41.711; ρ = 1000 kg/m 3 Phantom section: Flat Section Ambient Temperature:22.5°C;Liquid Temperature:22.3°C; DASY Configuration: lProbe: EX3DV4 -SN3842; ConvF(10.09, 10.09, 10.09) @ 462.563 MHz; Calibrated: 1/25/2021 lSensor-Surface: 1.4mm (Mechanical Surface Detection) lElectronics: DAE4 Sn1549; Calibrated: 3/23/2021 lPhantom: ELI V8.0 ; Type: QD OVA 004 AA ; Serial: 2078 lDASY52 52.10.2(1495); SEMCAD X 14.6.12(7450) Body worn/CH 4/Area Scan (71x101x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.0483 W/kg Body worn/CH 4/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 7.458 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.0620 W/kg SAR(1 g) = 0.034 W/kg; SAR(10 g) = 0.023 W/kg Maximum value of SAR (measured) = 0.0484 W/kg 0 dB = 0.0484 W/kg = -13.15 dBW/kg

Appendix C: Dipole Calibration Certificate 1 of 6 1.1. D450V3 Dipole Calibration Certificate Appendix C: Dipole Calibration Certificate 2 of 6 Appendix C: Dipole Calibration Certificate 3 of 6 Appendix C: Dipole Calibration Certificate 4 of 6 Appendix C: Dipole Calibration Certificate 5 of 6 Appendix C: Dipole Calibration Certificate 6 of 6 Appendix B: DAE and Probe Calibration Certificate 1 of 12 1.1. DAE4 Calibration Certificate Appendix B: DAE and Probe Calibration Certificate 2 of 12 Appendix B: DAE and Probe Calibration Certificate 3 of 12 Appendix B: DAE and Probe Calibration Certificate 4 of 12 1.2. Probe Calibration Certificate Appendix B: DAE and Probe Calibration Certificate 5 of 12 Appendix B: DAE and Probe Calibration Certificate 6 of 12 Appendix B: DAE and Probe Calibration Certificate 7 of 12 Appendix B: DAE and Probe Calibration Certificate 8 of 12 Appendix B: DAE and Probe Calibration Certificate 9 of 12 Appendix B: DAE and Probe Calibration Certificate 10 of 12 Appendix B: DAE and Probe Calibration Certificate 11 of 12 Appendix B: DAE and Probe Calibration Certificate 12 of 12

Report No.: 210512004SAR-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6, Baoneng Science and Technology Park, Qingxiang Road No.1, Longhua New District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com Photographs of SAR Setup Front Face of EUT with 2.5 cm Gap Rear Face of EUT with 0 cm Gap

41174 walkie talkie Y342 1 of 1LUNG CHEONG SHEET:APPROVED BY:DRAWING BY:DESIGN BY: DWG NO: FUNCTION: TITLE: longdanyu 2021-06-01V1.0 美国版，频率：462.5625M 1 XI 2 VCCRF 3 ANT 4 VCCPA 5 VSS 6 MIC 7 AUDC 8 VCCAUD 9 EAROP 10 EARON 11 SCK 12 SDA 13 RSSI 14 CDVDD 15 SQ 16 XO U1 H130 Y1 21.25M C32 100nF C10 100nF C17100nF C11 100nF C1 15pF C2 100nF C28 15pF C33 12pF C304.7nF L13 27nH L2 15nH ANTA MIC1 C4 1nF R5 100K R102.2K SPK R20R C64 15pF C5 15pF C18 1uF R3210K R36 15K R3100K R58 2K R59 47K Q1 8550 R7 10 C6 104 D2 K3 PTT 1 GND 2 IN 3 OUT U7 3V-LDO C7 4.7uf C3 10nF C52 100nF C12 4.7uF BAT 9V R4 100R D1NC SW2 SW1 ON-OFF PTC 1 VCC 2 PA2 3 PA1 4 PA3 5 PA0 6 PA5 7 PA4 8 VSS H132 VDD VDD 3V BATT VDD 3V 3V CLK TP6

Operation Mode Channel Frequency (MHz) ERP (dBm) ERP (W) Limits (W) Margin (W) Pass/Fail FRS 1462.5625 -1.7 0.0007 2.00-1.9993Pass Report No.:210512003RFC-1 APPENDIX A MAXIMUM TRANSMITTER POWER TEST DATA Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Page 1 of 6 Report No.: 210512003RFC-1 Limit (kHz)Pass / Fail 300Hz1000Hz2500Hz3125Hz 0.120.130.130.082.50Pass 0.130.220.410.322.50Pass 0.190.340.670.472.50Pass 0.350.971.791.402.50Pass 0.501.521.961.752.50Pass 0.871.862.001.802.50Pass 1.151.992.001.982.50Pass 1.932.062.011.892.50Pass 2.092.062.011.892.50Pass The test plot as follows: 10 15 20 -15 -10 -5 0 5 Peak frequency deviation (kHz) FRS: Channel 1 Modulation Level (dB) -20 APPENDIX B MODULATION LIMIT TEST DATA 0.00 0.50 1.00 1.50 2.00 2.50 3.00 -20-15-10-505101520 Peak Deviation (KHz) Modulation Level (dB) Modulation Limit for 12.5KHz 300Hz1000Hz2500Hz3125HzLimit (kHz) Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Page 2 of 6 Report No.: 210512003RFC-1 Channel 1 N/AN/A Channel1 N/AN/A 100 0.06//-19.85// 200 0.08//-17.36// 300 0.15//-11.90//-9.40-17.80 400 0.23//-8.18//-6.90-12.90 500 0.31//-5.62//-5.00-9.00 600 0.36//-4.32//-3.40-7.40 700 0.41//-3.16//-2.10-6.10 800 0.48//-1.79//-0.90-4.90 900 0.46//-2.24//0.10-3.90 1000 0.59//0.00//1.00-3.00 1200 0.62//0.37//2.60-1.40 1400 0.73//1.85//3.90-0.10 1600 0.77//2.31//5.101.10 1800 0.88//3.51//6.102.10 2000 0.95//4.09//7.003.00 2100 0.98//4.41//7.403.40 2200 1.23//6.38//7.803.80 2300 1.07//5.16//8.204.20 2400 1.11//5.51//8.604.60 2500 1.13//5.65//8.904.90 2600 1.13//5.64//9.304.60 2700 1.18//6.01//9.604.30 2800 1.24//6.45//9.904.00 2900 1.22//6.30//10.203.60 3000 1.10//5.43//10.503.40 3500 0.87//3.37// 4000 0.72//1.73// 4500 0.21//-8.97// 5000 0.09//-16.33// Pass/Fail Pass APPENDIX C AUDIO FREQUENCY RESPONSE TEST DATA Audio Frequency (Hz) Audio Frequency Response (dB)Frequency Deviation Limit-1Limit-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Page 3 of 6 Report No.:210512003RFC-1 The test plot as follows: APPENDIX C AUDIO FREQUENCY RESPONSE TEST DATA -25.00 -20.00 -15.00 -10.00 -5.00 0.00 5.00 10.00 15.00 1001000 Response Attenuation (dB) Audio Frequency (Hz) Audio Frequency Response (dB) Channel1Limit-1Limit-2 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Page 4 of 6 Report No.:210512003RFC-1 Channel 1 N/AN/A Channel 1 Channel 11Channel 19 1000 -0.16//0.00//0.00Pass 3000 -10.58//-10.42//0.00Pass 4000 -22.38//-22.22//-7.50Pass 5000 -35.80//-35.64//-13.30Pass 6000 -45.96//-45.80//-18.10Pass 8000 -56.43//-56.27//-25.60Pass 10000 -62.87//-62.71//-31.40Pass 15000 -62.56//-62.40//-41.90Pass 20000 -60.88//-60.72//-50.00Pass 30000 -61.49//-61.33//-50.00Pass 40000 -61.99//-61.83//-50.00Pass 50000 -62.56//-62.40//-50.00Pass 60000 -64.32//-64.16//-50.00Pass 70000 -62.49//-62.34//-50.00Pass 80000 -61.54//-61.38//-50.00Pass 90000 -62.46//-62.31//-50.00Pass 100000 -61.90//-61.74//-50.00Pass The test plot as follows: APPENDIX D AUDIO LOW PASS FILTER RESPONSE TEST DATA Audio Frequency (Hz) Measured value (dB)Response Attenuation (dB) Limit Pass/Fail -70.00 -60.00 -50.00 -40.00 -30.00 -20.00 -10.00 0.00 1000100000 Response Attenuation (dB) Audio Frequency (Hz) Audio Low Pass Filter Response LimitChannel 1Channel 11Channel 19 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Page 5 of 6 Report No.:210512003RFC-1 Temp. Frequency Drift Limit (°C)(ppm)(ppm) 50-1.36852.5 Pass 40-1.39442.5 Pass 30-1.46122.5 Pass 20-1.46362.5 Pass 10-1.36822.5 Pass 0-1.27332.5 Pass -10-1.35122.5 Pass -20-1.32312.5 Pass -30-1.40712.5 Pass VL-1.38792.5 Pass VH-1.30362.5 Pass 462.561867 462.561911 462.561875 462.561888 462.561849 462.561858 462.561897 Pass/Fail FRS_ Channel 1 (462.562500 MHz) Measured Frequency (MHz) APPENDIX E FREQUENCY STABILITY TEST DATA TN 462.561855 462.561824 462.561823 462.561867 Voltage VN Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Page 6 of 6

Page 2 of 29 Report No.: 210512003RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART95B-V1.1 Version Version No. Date Description V1.0 July 12, 2021 Original Page 3 of 29 Report No.: 210512003RFC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-FCCPART95B-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES ............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 4 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.6 TEST LOCATION ................................................................................................................................................. 5 1.7 TEST FACILITY................................................................................................................................................... 5 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 6 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION ...............................................................................................................................…

Text truncated - open the document above for the full version.