2AB22-EBS-151Etekcity High Capacity 550 Pound Digital Body Weight Scale

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warranty Customer Support *Please have your invoice and order ID ready before contacting Customer Support. Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806, USA Support Hours Monday – Friday 9:00 am – 5:00 pm PST/PDT Email: [email protected] Toll-Free: (855) 686-3835 A0-01.00_S_22H04_us retail High Capacity 550 Pound Digital Body Weight Scale Model Line: EBS-151 Scan Here to Receive Exclusive News Your product comes with 2 years of warranty, starting from the date of purchase. 1. Scan the QR code or visit etekcity.com/warranty. 2. Enter your purchase info to receive exclusive news. 3. Learn about our quality customer support and gain easy access to warranty information. Quick Start Guide Ta p + in the VeSync app. 4 Note: •You can change the scale’s in-app name and icon at any time in the smart weight scale settings. •When the scale display turns off, the scale’s Bluetooth will disconnect and go into auto- off mode. However, when the scale display lights up and the app is opened to the device page, the scale will reconnect to Bluetooth. Note: You can tap on the product categories to jump to different sections of the device list. To download the free VeSync app, scan the QR code or search “VeSync” in the Apple App Store ® or Google Play Store. Note: •This scale does not use the VeSyncFit app. •Please make sure your firmware and software are up to date. •The VeSync app is continually being improved and may change over time. If there are any differences, follow the in-app instructions. Select your smart scale from the device list. Follow the in-app instructions to complete setup. Make sure your phone has Bluetooth ® turned on. 3 1 Open the VeSync app. Log In or Sign Up. 2 Log In Sign Up 6 In-app Instructions 5 Select Smart Scale Select Federal Communication Commission Interference Statement FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Etekcity Corporation hereby declares that this equipment is in compliance with the FCC rules. The declaration of conformity may be consulted in the support section of our website, accessible from www.etekcity.com FCC SDOC SUPPLIER’S DECLARATION OF CONFORMITY Display Messages Specifications Weight Capacity550 lb / 250 kg / 39 st Increments 0.1 lb / 0.05 kg (<200 kg) 0.2 lb / 0.1 kg (≥200 kg) Weight Unitslb / kg / st PlatformTempered Glass Battery3 x 1.5V AAA Batteries Auto-Off30 seconds Dimensions 14.4 x 12.4 x 1.2 in / 365 x 315 x 30.5 mm Operating SystemiOS ® 10.0+ or Android™ 5.0+ Low battery. Replace batteries. Scale needs to be cleared. Please place the scale on a hard, flat surface and wait for it to be cleared before use. Weight exceeds 550 lb / 250 kg / 39 st. Use a scale with a higher weight capacity. Using Your Scale Tips 1. Place the scale on a hard, flat surface (not a carpet or mat). •To switch between pounds (lb), kilograms (kg), and stone(st), press the unit switching button on the underside of the scale. -You can also download the VeSync app and select the desired weight unit in the Device Settings menu. •If the scale has been moved or flipped upside down, it needs to be cleared. 1. Step on the scale until digits appear on the display, then step off. 2. The scale will show “ ” when cleared. •If your scale won’t connect to the VeSync app: -Make sure your phone has Bluetooth ® turned on and the scale is not currently connected to another Bluetooth ® device. For Android users, make sure your Location is turned on as well. -Download and open the newest version of the VeSync app. -Make sure your phone’s operating system is iOS ® 10.0+ or Android™ 5.0+. •If you have other scale problems, try removing the batteries for 45 seconds, then replacing them. If the problem is not resolved, replace the batteries with new ones. Note: Before first use, remove the plastic insulator strip from the battery…

Text truncated - open the document above for the full version.

EtekcityCorporation I,theundersigned,Chrishuang: Thefollowingmodelshavethesametechnicalconstructionincludingcircuitdiagram,PCB Layout,componentsandcomponentlayout,allelectricalconstructionandmechanical construction,exceptthedifferentmodelnumber. 1)ModelNo.:EBS-151-WUSR 2)ModelNo.:EBS-151-XXXX(Xcanbe0-9orA-Zortheircombinationsorblank) FCCID:2AB22-EBS-151 Sincerely, Client’ssignature: Client’sname/title:ChrisHuang/SrManager,ProductCompliance Contactinformation/address:1202NMillerStSuiteA,ANAHEIM,California92806, UnitedStates Telephone:86-755-23215504 FaxNo.:N/A

DATE:9/28/2022 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID:2AB22-EBS-151 ProductName:EtekcityHighCapacity550PoundDigitalBodyWeightScale RequestforConfidentiality PursuanttoSections0.457and0.459ofthecommissionsrules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: Schematics  Blockdiagram Operationdescription Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. <Signature> Name：ChrisHuang Title：SrManager,ProductCompliance Company：EtekcityCorporation

DATE:9/28/2022 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointESTTechnologyCo.,Ltd.Address:Chilingxiang,Qishantou, Santun,Houjie,Dongguan,Guangdong,Chinatoactasouragentinthepreparationof thisapplicationforequipmentcertification.Icertifythatsubmitteddocumentsproperly describethedeviceorsystemforwhichequipmentcertificationissought.Ialsocertifythat eachunitmanufactured,importedormarketed,asdefinedintheFederalCommunications Commission’sregulationswillhaveaffixedtoitalabelidenticaltothatsubmittedfor approvalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditions forcertification,stillresideswithEtekcityCorporationAddress:1202NMillerStSuite A,ANAHEIM,California92806,UnitedStates <Signature> Name：ChrisHuang Title：SrManager,ProductCompliance ApplicantCompany：EtekcityCorporation

External Photos M/N: EBS-151-WUSR External Photos M/N: EBS-151-WUSR External Photos M/N: EBS-151-WUSR

名称: Etekcity High Capacity 550 Pound Digital Body Weight Scale(US Retail) 型号: EBS-151-WUSR 材质: 消银龙, 背胶, 亮膜, 50番 尺寸: 42.5x23.5mm 23.5mm 42.5mm High Capacity 550 Pound Digital Body Weight Scale This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Model: EBS-151-WUSR Capacity: 550 lb / 250 kg / 39 st Increments: 0.1 lb / 0.05 kg (<200 kg) 0.2 lb / 0.1 kg (≥200 kg) Battery: 3 x 1.5 V AAA Batteries (Pre-Installed) FCC ID: 2AB22-EBS-151 Made in China B/N码请根据实际生产订单号、日期等更新， 编码规则请查看我司最新版《产品铭牌B/N码编码规范》 B/N: Etekcity Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 Email: [email protected] Toll-Free: (855) 686-3835

Label Location

Internal Photos M/N: EBS-151-WUSR Internal Photos M/N: EBS-151-WUSR Internal Photos M/N: EBS-151-WUSR Bluetooth Antenna

FCC ID: 2AB22-EBS-151 EST Technology Co., Ltd Report No. ESTE-R2209142 Page 1 of 3 FCC RF EXPOSURE REPORT Etekcity Corporation Etekcity High Capacity 550 Pound Digital Body Weight Scale Model Number: EBS-151-WUSR Additional Model: EBS-151-XXXX (X can be 0-9 or A-Z or their combinations or blank) FCC ID: 2AB22-EBS-151 Applicant: Etekcity Corporation Address: 1202 N Miller St Suite A, ANAHEIM, California 92806, United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2209142 Date of Test: Sep. 03~23, 2022 Date of Report: Sep. 26, 2022 FCC ID: 2AB22-EBS-151 EST Technology Co., Ltd Report No. ESTE-R2209142 Page 2 of 3 1. Applicable Standards FCC Part 2(Section 2.1093) FCC KDB 447498 D04 Interim General RF Exposure Guidance v01 2. Exposure Evaluation of Portable or Mobile Devices Human exposure to RF emissions from portable devices (47 CFR §2.1093), as defined by the FCC, must be evaluated with respect to the FCC-adopted limits for SAR. Evaluation of mobile devices, as defined by the FCC, may also be performed with respect to SAR limits, but in such cases it is usually simpler and more cost-effective to evaluate compliance with respect to field strength or power density limits. For certain devices that are designed to be used in both mobile and portable configurations similar to those described in 47 CFR §2.1091(d)(4), such as certain desktop phones and wireless modem modules, compliance for mobile configurations is also satisfied when the same device is evaluated for SAR compliance in portable configurations. The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 300 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. FCC ID: 2AB22-EBS-151 EST Technology Co., Ltd Report No. ESTE-R2209142 Page 3 of 3 3. Evaluation Results Mode CH Peak output Power (dBm) Antenna Gain (dBi) Target power (dBm) Max. Target power (mW) SAR Test Exemption Limit (mW) BLE 2402 -1.91 -5 -1±1 1.000 2.72 2440 -3.63 -5 -3±1 0.631 2.72 2480 -4.26 -5 -4±1 0.501 2.72 Note: 1. We choose f=2.48GHz (Highest frequency operate at bluetooth) to calculate MPE limit as higher frequency will have lower MPE limits. 2. SAR Test Exclusion Thresholds is 2.72mW for separation distance 5mm. Therefore, SAR test is not required. End of Test Report

FCC ID: 2AB22-EBS-151 EST Technology Co., Ltd Report No.ESTE-R2209141 Page 1 of 55 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Etekcity Corporation Etekcity High Capacity 550 Pound Digital Body Weight Scale Model Number: EBS-151-WUSR Additional Model: EBS-151-XXXX (X can be 0-9 or A-Z or their combinations or blank) FCC ID: 2AB22-EBS-151 Applicant : Etekcity Corporation Address: 1202 N Miller St Suite A, ANAHEIM, California 92806, United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2209141 Date of Test: Sep. 03~23, 2022 Date of Report: Sep. 26, 2022 FCC ID: 2AB22-EBS-151 EST Technology Co., Ltd Report No.ESTE-R2209141 Page 2 of 55 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 5 1.1. Description of Device (EUT) ........................................................................................................... 5 1.2. Antenna Information ........................................................................................................................ 5 1.3. Information of RF Cable .................................................................................................................. 5 2. SUMMARY OF TEST ......................................................................................................................... 6 2.1. Summary of test result ...................................................................................................................... 6 2.2. Test Facilities ................................................................................................................................... 7 2.3. Measurement uncertainty ................................................................................................................. 8 2.4. Assistant equipment used for test ..................................................................................................... 8 2.5. Block Diagram ................................................................................................................................. 8 2.6. Test Mode ......................................................................................................................................... 9 2.7. Power Setting of Test Software ........................................................................................................ 9 2.8. Duty Cycle ...................................................................................................................................... 10 2.9. Channel List ................................................................................................................................... 11 2.10. Test Equipment List ....................................................................................................................... 12 3. 6DB BANDWIDTH .......................................................................................................................... 13 3.1. Limit ............................................................................................................................................... 13 3.2. Test Setup ....................................................................................................................................... 13 3.3. Spectrum Analyzer Setting ............................................................................................................. 13 3.4. Test Procedure ................................................................................................................................ 13 3.5. Test Result ...................................................................................................................................... 13 4. MAXIMUM PEAK OUTPUT POWER ................................................................................................. 14 4.1. Limit ............................................................................................................................................... 14 4.2. Test Setup ....................................................................................................................................... 14 4.3. Spectrum Analyzer Setting ............................................................................................................. 14 4.4. Test Procedure ................................................................................................................................ 14 4.5. Test Result ...................................................................................................................................... 14 5. POWER SPECTRAL DENSITY .......................................................................................................... 15 5.1. Limit ............................................................................................................................................... 15 5.2. Test Setup ....................................................................................................................................... 15 5.3. Spectrum Analyzer Setting ............................................................................................................. 15 5.4. Test Procedure ................................................................................................................................ 15 5.5. Test Result ...................................................................................................................................... 15 6. CONDUCTED BAND EDGE ............................................................................................................. 16…

Text truncated - open the document above for the full version.

Radiated Test (30-1000 MHz) Radiated Test (Above 1GHz)