
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
MOBILE ODYSSEY ERIS CLIP SPEAKER - USER MANUAL ART FILE 07.11.14 UM-X-MH16 Revision : Page 1 OF 1 © 2014 LEEDSWORLD Proprietary information contained in this drawing is the sole property of Leedsworld. Any reproduction in part or as a whole without the written permission of Leedsworld is prohibited. AUG14 75mm A 0102 0304 B 55mm This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
E-POWER LIMITED FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name E-POWER LIMITED Addresss 2nd Floor, NO.2 Building, Mingxin Industrial Area, Nanhuan Road, Shajing Bao'an District City Shenzhen Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: 2AB2N ERIS of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) x Operational Description x Block Diagrams x Schematics Diagrams Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Shenzhen 2014.11.13 Leo liu Sales manager
APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6
FCC ID LABELING AND LOCATION FCC ID Label FCC ID: 2AB2NERIS FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)
Photo 7 Photo 8 Photo 9 Photo 10
Report No. ATT-2014SZ1115003F - Page 1 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn FCC RADIO TEST REPORT FCC ID: 2AB2NERIS Product: Bluetooth speaker Trade Name: N/A Model Name: ERIS Serial Model: BT-198, BT-208, BT-308, BT-408, BT-508 BT-608, SP-30 Prepared for E-POWER LIMITED 2nd Floor, NO.2 Building, Mingxin Industrial Area, Nanhuan Road, Shajing Bao'an District, Shenzhen, Guangdong, China Prepared by Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 Http: www.att-lab.net Report No. ATT-2014SZ1115003F - Page 2 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn TEST RESULT CERTIFICATION Applicant’s name............. E-POWER LIMITED Address ............................. 2nd Floor, NO.2 Building, Mingxin Industrial Area, Nanhuan Road, Shajing Bao'an District, Shenzhen, Guangdong, China Manufacture's Name........ E-POWER LIMITED Address ............................. 2nd Floor, NO.2 Building, Mingxin Industrial Area, Nanhuan Road, Shajing Bao'an District, Shenzhen, Guangdong, China Product description Product name ......................Bluetooth speaker Model and/or type reference .......................... ERIS Additional Model ................ BT-208, BT-308, BT-408, BT-508, BT-608, SP-30 Standards......................... FCC Part15.247 Test procedure ..................... ANSI C63.4-2003 This device described above has been tested by ATT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ATT, this document may be altered or revised by ATT, personal only, and shall be noted in the revision of the document. Date of Test........................................ Date (s) of performance of tests ......... Nov 09. 2014 ~Nov 18. 2014 Date of Issue....................................... Nov 18. 2014 Test Result........................................... Pass Testing Engineer : (Eric Wang) Technical Manager : (Jerry You) Authorized Signatory : (Jack yu) Report No. ATT-2014SZ1115003F - Page 3 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn Table of Contents Page 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACILITY 7 1.2 MEASUREMENT UNCERTAINTY 7 2 . GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF EUT 8 2.2 DESCRIPTION OF TEST MODES 10 2.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 2.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 12 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 13 3 . EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 3.1.2 TEST PROCEDURE 15 3.1.3 DEVIATION FROM TEST STANDARD 15 3.1.4 TEST SETUP 15 3.1.5 EUT OPERATING CONDITIONS 15 3.1.6 TEST RESULTS 16 3.2 RADIATED EMISSION MEASUREMENT 18 3.2.1 RADIATED EMISSION LIMITS 18 3.2.2 TEST PROCEDURE 19 3.2.3 DEVIATION FROM TEST STANDARD 19 3.2.4 TEST SETUP 20 3.2.5 EUT OPERATING CONDITIONS 21 3.2.6 TEST RESULTS (BELOW 30 MHZ) 22 3.2.7 TEST RESULTS (BETWEEN 30M – 1000 MHZ) 23 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 24 4 . NUMBER OF HOPPING CHANNEL 52 4.1 APPLIED PROCEDURES / LIMIT 52 4.1.1 TEST PROCEDURE 52 4.1.2 DEVIATION FROM STANDARD 52 4.1.3 TEST SETUP 52 4.1.4 EUT OPERATION CONDITIONS 52 4.1.5 TEST RESULTS 53 Report No. ATT-2014SZ1115003F - Page 4 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn Table of Contents Page 5 . AVERAGE TIME OF OCCUPANCY 54 5.1 APPLIED PROCEDURES / LIMIT 54 5.1.1 TEST PROCEDURE 54 5.1.2 DEVIATION FROM STANDARD 54 5.1.3 TEST SETUP 55 5.1.4 EUT OPERATION CONDITIONS 55 5.1.5 TEST RESULTS 56 6 . HOPPING CHANNEL SEPARATION MEASUREMENT 62 6.1 APPLIED PROCEDURES / LIMIT 62 6.1.1 TEST PROCEDURE 62 6.1.2 DEVIATION FROM STANDARD 62 6.1.3 TEST SETUP 62 6.1.4 EUT OPERATION CONDITIONS 62 6.1.5 TEST RESULTS 63 7 . BANDWIDTH TEST 69 7.1 APPLIED PROCEDURES / LIMIT 69 7.1.1 TEST PROCEDURE 69 7.1.2 DEVIATION FROM STANDARD 69 7.1.3 TEST SETUP 69 7.1.4 EUT OPERATION CONDITIONS 69 7.1.5 TEST RESULTS 70 8 . PEAK OUTPUT POWER TEST 76 8.1 APPLIED PROCEDURES / LIMIT 76 8.1.1 TEST PROCEDURE 76 8.1.2 DEVIATION FROM STANDARD 76 8.1.3 TEST SETUP 76 8.1.4 EUT OPERATION CONDITIONS 76 8.1.5 TEST RESULTS 77 9 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 83 9.1 DEVIATION FROM STANDARD 83 9.2 TEST SETUP 83 9.3 EUT OPERATION CONDITIONS 83 9.4 TEST RESULTS 84 10 . ANTENNA REQUIREMENT 92 10.1 STANDARD REQUIREMENT 92 Report No. ATT-2014SZ1115003F - Page 5 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn Table of Contents Page 10.2 EUT ANTENNA 92 11 . EUT TEST PHOTO 93 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Report No. ATT-2014SZ1115003F - Page 6 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.2…
Text truncated - open the document above for the full version.
Report No. ATT-2014SZ1115003F - Page 93 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn 11. EUT TEST PHOTO Radiated Measurement Photos Report No. ATT-2014SZ1115003F - Page 94 of 94 - Shenzhen Asia Test Technology Co.,Ltd. 1/6, Bldg.8, Zhonghua Industrial City, Chuangye Rd., Nanshan District, Shenzhen, Guangdong, China Tel: +(86)-0755-23284990 Fax: +(86)-0755-23284990 http:// www.att-lab.cn Conducted Measurement Photos
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 2.00 mW |

Bluetooth Speaker
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Bluetooth Headphones
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter