2AB3E-IPA154BLUETOOTH SPEAKER

IONAUDIO.COM 4 Pour obtenir toutes les informations relatives à la garantie. Important Safety Instructions ( English ) v1.6 1. Read and keep these instructions. Heed all warnings and follow all Instructions. 2. Warning (if applicable): Please refer to any important info rmation (e.g., electrical, safety, etc.) printed on the exterior bottom enclosure or rear panel before installing or operating the product. 3. Clean only with dry cloth. 4. Water and Moisture (if applicable): Do not use this apparatus near water. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Electrical equipment should NEVER be kept or stored in damp environments. 5. (If applicable) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install this equipment in a confin ed or “boxed-in” space such as a bookcase or similar unit, and maintain good ventilation conditions. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains, etc. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not place expose d flame sources such as lighted candles on the apparatus. 7. (If applicable) This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. 8. (If applicable) Be careful not to damage the power cord. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Before using it again, make sure the power cord has not been damaged. If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Only use attachment/accessories specified by the manufacturer. 11. (If applicable) Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12. Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself. 13. Caution (if applicable): Danger of explosion if battery is incorr ectly replaced. Replace only with the same or equivalent type. Batteries (a battery pack or an in stalled battery) shall not be exposed to excessive heat such as sunshine, fire, etc. 14. (If applicable) Do not defeat the safety purpose of the polarized or grounding-type plug. 15. Protective earthing terminal (if applicable): The ap paratus should be connected to a mains socket outlet with a protective earthing connection. • Denmark ( Danmark ): Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver forbindelse til stikproppens jord. • Finland ( Suomi ): Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan. • Norway ( Norge ): Apparatet må tilkoples jordet stikkontakt. • Sweden ( Sverige ): Apparaten skall anslutas till jordat uttag. 16. For Class II apparatus only : This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. When servicing use only identi cal replacement parts installed by an instructed person or with the use of ready-made leads or cords. 17. Warning (if applicable): Provide an earthing connection be fore the mains plug is connected to the mains. When disconnecting the earthing connection, be sure to disconnect it after pulling the mains plug out from the mains. 18. (If applicable) Where the mains plug or an applian ce coupler is used as the disconnect device, the disconnect device shall remain readily operable . 19. Warning (if applicable): To prevent possible hearing damage, do not listen at high volume levels for long periods. 20. This apparatus is for professional use only . Intended operational climate: moderate. Safety Notices CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIE D SERVICE PERSONNEL ONLY. DANGEROUS VOLTAGE : The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. INSTRUCTIONS : The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instru ctions in the literature acco mpanying this appliance. CAUTION ( for U.S.A. & CANADIAN models only ): TO PREVENT ELECTRIC SH OCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTICE CONCERNING LASER PRODUCTS : DANGER : INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOS URE TO BEAM. USE OF CONTROLS OR ADJUSTMENTS OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. NOTICE CONCERNING FCC REGULATIONS : You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation. This equipment generates…

Text truncated - open the document above for the full version.

ION Audio, LLC 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. DATE : 2023/01/03 ION Audio, LLC 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint below company and person: Name Damon Hu Position Manager Company Name Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-38826678-850 E-Mail [email protected] to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. Applicant name ION Audio, LLC Address 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Yours sincerely, Signatory Name Hill Lien Position Director of Compliance Company Name ION Audio, LLC Address 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Tel 886-2-2717-2389 E-Mail [email protected]

1/1 Declaration of difference Date: 2023-01-03 To Whom It May Concern: The Product: BLUETOOTH SPEAKER Model No.: PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** All models are identical except the appearance color and model number. There is no influence on the test results. “*” can be “0-9”, “a-z”, “A-Z”, “blank” or “-” for marketing purpose. Yours sincerely, Signatory Name Hill Lien Position Director of Compliance Company Name ION Audio, LLC Address 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Tel 886-2-2717-2389 E-Mail [email protected]

C5266091_X8_Ed.1 1/1 Letter of Authorization ION Audio, LLC Company: ION Audio, LLC Address: 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Product Name: BLUETOOTH SPEAKER Model Number: PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** FCC Identifier: 2AB3E-IPA154 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Hill Lie n Date: 2023/01/03 Title: Director of Compliance Signature of applicant:

C5266091_X10_Ed.1 1/1 ION Audio, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023/01/03 Subject: Request for Confidentiality FCC ID: 2AB3E-IPA154 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential do cuments and those information will be available for public review once the grant of equipment authorization is issued. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180__ days from the date of the Grant of Equipment Authorization and prior to marketing. Sincerely, Signature: Name: Hill Lien Title: Director of Compliance

Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 1 of 5 AppendixI: Photos of the EUT Product Name : BLUETOOTH SPEAKER Model Number : PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 2 of 5 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 3 of 5 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 4 of 5 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 5 of 5 END

FUSE: T3.15AL AC250V This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)]. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation of the device.

Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 5 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 6 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 7 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 8 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 9 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 10 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 11 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 12 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 13 of 18 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 14 of 18 Magnetic ring: T22*14*8mm Magnetic ring: T22*14*8mm Magnetic ring: V18004 Magnetic ring: V18004 Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 15 of 18 Light control board 1: Guangzhou Yongchen Technology Co., Ltd Light control board 1: Guangzhou Yongchen Technology Co., Ltd Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 16 of 18 Light control board 1: Guangzhou Yongchen Technology Co., Ltd Light control board 1: Guangzhou Yongchen Technology Co., Ltd Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 17 of 18 Light control board 2: Guangzhou huihuang electronic co., ltd Light control board 2: Guangzhou huihuang electronic co., ltd Dongguan Dongdian Testing Service Co., Ltd. Case No.: DDT-Q22052601-1E Page 18 of 18 Light control board 2: Guangzhou huihuang electronic co., ltd Light control board 2: Guangzhou huihuang electronic co., ltd END

Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 1 of 7 RF EXPOSURE REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : BLUETOOTH SPEAKER Model No. : PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** Project Code : iPA154 Trade Mark : FCC ID : 2AB3E-IPA154 IC : 10541A-IPA154 Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Report No.: DDT-R22052601-2E03 Issued Date: Dec. 29, 2022 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 2 of 7 Table of Contents Test report declares.......................................................................................................3 1. General Information ....................................................................................................... 5 1.1. Description of equipment ............................................................................................... 5 1.2. Assess laboratory ........................................................................................................... 5 2. RF Exposure Evaluation ................................................................................................ 6 2.1. Requirement ................................................................................................................... 6 2.2. Calculation method ........................................................................................................ 6 2.3. Estimation result ............................................................................................................. 7 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 3 of 7 Test Report Declare Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Dongguan Dongdian Testing Service Co., Ltd and in the configuration assessed the equipment complied with the standards specified above. The assessed results are contained in this report and Dongguan Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above standard. Report No.: DDT-R22052601-2E03 Date of Receipt: Oct. 15, 2022 Date of Test: Oct. 31, 2022 ~ Dec. 27, 2022 Prepared By: Approved By: ____________________ ______________________ Jacky Huang/Engineer Damon Hu/EMC Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan Dongdian Testing Service Co., Ltd. Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : BLUETOOTH SPEAKER Model No. : PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** Trade mark : Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. E S T T I N N A I G D S G E N R O V D I C E N A C U O G . , G L N T O D D . Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 4 of 7 Revision History Rev. Revisions Issue Date Revised By --- Initial issue Dec. 29, 2022 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 5 of 7 1. General Information 1.1. Description of equipment 1.2. Assess laboratory Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808. Tel.: +86-0769-38826678, http://www.dgddt.com, Email: [email protected]. CNAS Accreditation No. L6451; A2LA Accreditation Number: 3870.01 FCC Designation Number: CN1182, Test Firm Registration Number: 540522 Innovation, Science and Economic Development Canada Site Registration Number: 10288A Conformity Assessment Body identifier: CN0048 VCCI facility registration number: C-20087, T-20088, R-20123, R-20155, G-20118 EUT* Name : BLUETOOTH SPEAKER Model Number : PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** Model Differences : PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** (“*” can be “0-9”, “a-z”, “A-Z”, “blank” or “-” for marketing purpose) All models are identical except the appearance color and model number, therefore the test performed on the model iPA154. EUT function description : Please reference user manual of this device Power Supply : 100-240V~, 50/60Hz Radio Specification : Bluetooth V5.0 Operation Frequency : 2402 MHz - 2480 MHz Modulation : GFSK, /4-DQPSK, 8DPSK Data rate : 1 Mbps, 2 Mbps, 3 Mbps Antenna Gain : 2.81 dBi Sample Number : S22052601-03 for conductive, S22052601-04 for radiation Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 6 of 7 2. RF Exposure Evaluation 2.1. Requirement Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. Limits for General Population/Uncontrolled Exposure 2.2. Calculation method From the peak EUT RF output power, the minimum mobile separation distance, d= 0.2 m, as well as the gain of the used antenna, the RF power density can be obtained. Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R22052601-2E03 Page 7 of 7 2.3. Estimation result Mode PK Output power (dBm) Output power (mW) Antenna Gain (dBi) Antenna Gain (linear) MPE Values (mW/cm 2 ) MPE …

Text truncated - open the document above for the full version.

R PORT No.：SZ19080340E01 TEST REPORT Applicant : SHANGHAI MOUNTAIN VIEW SILICON CO,. LTD PRODUCT NAME : MV_BP10xx PCB Antenna MODEL NAME : TRADE NAME : MV_BP10 MVSILICON BRAND NAME : MVSILICON STANDARD(S) : ANSI/IEEE Std 149-2008 RECEIPT DATE : 2019-08-30 TEST DATE ISSUE DATE : 2019-09-02 : 2019-10-15 Edited by: Chi Shide(Rapporteur) Approved by: Andy Yeh(Technical Director) NOTE: This document is issued by MORLAB, the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 1 of 12 REPORT No.：SZ19080340E01 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China MORLAB Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 12 DIRECTORY 1. Technical Information∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1. Manufacturer and Factory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2. Equipment Under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 2. Test Results ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.1. Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.2. Test Conditions ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2.3. Test Results lists∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 Annex A Photographs ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 Annex B Figures ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 1. 2D Radiation Pattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 2. 3D Radiation Pattern ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 9 3. Return Loss ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 10 4. VSWR∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 5. Input Impedance ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 11 Annex D General Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.1 Identification of the Responsible Testing Laboratory ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.2 Identification of the Responsible Testing Location ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 1.3 Test Equipments Utilized ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 14 Change History Version Date Reason for change 1.0 2019-10-15 First edition REPORT No.：SZ19080340E01 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China MORLAB Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 12 1. Technical Information Note: Provide by manufacturer. 1.1. Manufacturer and Factory Information Applicant: SHANGHAI MOUNTAIN VIEW SILICON CO,. LTD Applicant Address: Suite 4C, Building 3, 1238 District, Shanghai, China Zhangjiang Road, Pudong New Manufacturer: SHANGHAI MOUNTAIN VIEW SILICON CO,. LTD Manufacturer Address: Suite 4C, Building 3, 1238 District, Shanghai, China Zhangjiang Road, Pudong New 1.2. Equipment Under Test (EUT) Description Wireless Type N/A Frequency N/A REPORT No.：SZ19080340E01 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China MORLAB Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 12 2. Test Results 2.1. Applied Reference Documents Leading reference documents for testing: No. Identity Document Title 1 ANSI/IEEE Std 149-2008 IEEE Standard Test Procedures for Antennas 2.2. Test Conditions Test Environment Conditions： Relative Humidity: 25 ... 75 % Temperature: +10 °C to +30 °C 2.3. Test Results lists 2.3.1. Gain Frequency Gain(dBi) 2400MHz 2.10 2410MHz 2.74 2420MHz 2.81 2430MHz 2.73 2440MHz 1.01 2450MHz 1.26 2460MHz 1.50 2470MHz 1.49 2480MHz 1.42 2490MHz 0.36 2500MHz 0.33 REPORT No.：SZ19080340E01 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China MORLAB Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 5 of 12 2.3.2. Return Loss/VSWR/Input Impedance Frequency Return Loss (dB) VSWR Input Impedance(Ω) 2400MHz -7.23 2.53 25.37 2440MHz -6.47 2.80 17.99 2450MHz -6.22 2.90 17.18 2480MHz -5.18 3.44 15.55 2500MHz -4.56 3.89 15.48 REPORT No.：SZ19080340E01 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn Distri…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R22052601-2E01 Page 1 of 89 FCC AND ISED CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : BLUETOOTH SPEAKER Model No. : PRO GLOW™ ULTRA, iPA154, PRO***************, iPA154****** HVIN : PRO GLOW™ ULTRA Project Code : iPA154 Trade Mark : FCC ID : 2AB3E-IPA154 IC : 10541A-IPA154 Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Report No.: DDT-R22052601-2E01 Issued Date: Dec. 29, 2022 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R22052601-2E01 Page 2 of 89 Table of Contents Test report declares.......................................................................................................4 1. Summary of Test Results ............................................................................................... 6 2. General Test Information ............................................................................................... 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 8 2.3. Assistant equipment used for test .................................................................................. 8 2.4. Block diagram of EUT configuration for test .................................................................. 8 2.5. Deviations of test standard............................................................................................. 8 2.6. Test environment conditions .......................................................................................... 9 2.7. Test laboratory ............................................................................................................... 9 2.8. Measurement uncertainty ............................................................................................... 9 3. Equipment Used During Test ....................................................................................... 10 4. Maximum Peak Output Power ..................................................................................... 12 4.1. Block diagram of test setup .......................................................................................... 12 4.2. Limits ............................................................................................................................ 12 4.3. Test procedure ............................................................................................................. 12 4.4. Test result ..................................................................................................................... 12 4.5. Original test data .......................................................................................................... 13 5. 20 dB Bandwidth and 99% Bandwidth ......................................................................... 16 5.1. Block diagram of test setup .......................................................................................... 16 5.2. Limits ............................................................................................................................ 16 5.3. Test procedure ............................................................................................................. 16 5.4. Test result ..................................................................................................................... 16 5.5. Original test data .......................................................................................................... 17 6. Carrier Frequency Separation ...................................................................................... 23 6.1. Block diagram of test setup .......................................................................................... 23 6.2. Limits ............................................................................................................................ 23 6.3. Test procedure ............................................................................................................. 23 6.4. Test result ....................................................…

Text truncated - open the document above for the full version.