2AB3E-ISP132Wireless Speaker with BUILT-IN Microphone For Home and Office

Meeting Mate TM Quickstart Guide (English) Guía de inicio rápido (Español) Guide d’utilisation rapide (Français) v1.0 Meeting Mate TM Quickstart Guide (English) For the full User Guide and the latest information about this product, visit ionaudio.com . For additional product support, visit ionaudio.com/support . For complete warranty information: visit ionaudio.com/warranty . Box Contents Meeting Mate TM Stand Micro-USB Cable (3 ft. / 100 cm) Quickstart Guide Note: Before you first use the product, please fully charge the battery. Your unit was purposely shipped with a reduced battery char ge to ensure safe transit. For optimal charging, power off the speaker while charging. Features Top Panel A . Mic Mute Button: Press to mute or unmute the built-in microphone (located below the Power button). When muted, the Mic Mute LED below this button will be lit red. B. EQ Button: Press to cycle between EQ modes, indicated by the voice prompts – (1) "Music" and (2) "Voice." C. Bluetooth Button: Press and hold to disconnect a Bluetooth device. When connected to a Bluetooth device, the Bluetooth LED below this button will be lit blue. D. Power Button: Press and hold to turn Meeting Mate on or off. Press and release this button to change between USB Audio Mode and Auxiliary Mode. E. Play/Pause Button: Press to play or pause music on a Bluetooth connected device. F. -/+ Buttons: Press these buttons to decrease or increase the volume. Press and hold to move to the previous or next Bluetooth track. Rear Panel G. Micro-USB Port: Use the included micro-USB cable to connect this to a USB port on your computer or a phone charger to recharge Meeting Mate's battery. See Setup for more information on connecting to a computer. H. Aux Input: This stereo 1/8" (3.5 mm) input can be used to co nnect a CD player, MP3 player, or other audio source. I. Lights Button: Press to cycle between five light modes. In color phase mode, press and hold this button to freeze the lights on one color. Setup Meeting Mate TM can be set up horizontally, or vertically with the included stand. To use Meeting Mate TM with the stand, place the stand on a flat, stab le surface and position Meeting Mate TM vertically so that the Micro-USB and Aux ports are at the bottom. Align the ports with the cutout of the stand (as shown, left) and carefully insert the speaker into the stand. Connecting Meeting Mate TM to Your Computer In addition to using Meeting Mate TM as a Bluetooth device, you can also connect it to your computer and use it as an audio input and output device. First, Power on Meeting Mate TM and use the included micro-USB cable to connect the micro-USB port on Meeting Mate TM to an available USB port on your computer. When connected, you will hear "USB Mode" for confirmation. Then, select Meeting Mate TM as your audio device: • Windows: Go to Start Menu > Control Panel > Sound and select Meeting Mate under the Recording and Sound Playback tabs. • macOS: Go to Audio MIDI Setup and select Meeting Mate under the Input and Output tabs. You can now use Meeting Mate TM to listen to audio from your computer, receive video calls, and more. To switch from USB Audio Mode to Auxiliary Mode, press and release the power button. Conexión Bluetooth ® con Meeting Mate TM Conexión con un altavoz Meeting Mate TM : 1. Encienda el Meeting Mate Speaker manteniendo pulsado el botón Power durante 2 segundos. El Meeting Mate Speaker entrará automáticamente al modo de apareamiento de Bluetooth indicado medi ante un parpadeo intermitente de color azul del LED Bluetooth . 2. Navegue a la pantalla de configuración Bluetooth de su dispositivo, busque Meeting Mate Speaker , y conéctelo. Una vez establecida la conexión, el LED Bluetooth se quedará permanentemente encen dido de color azul y escuchará el mensaje "Connected". Nota: Si tiene problemas para conectarse, seleccione "Forget this Devi ce" (Olvidar este dispositivo) en su dispositivo Bluetooth e i ntente conectarse nuevamente. 3. Para desconectarse, desactive Bluetooth de la co nfiguración de Bluetooth de su dispositivo. Una vez apareado mediante Bluetooth, pulse y suelte el botón de reproducción/pausa para atender una llamada. Se escuchará el tono de llamada del teléfono a través del altavoz del Meeting Mate TM hasta que se atienda la llamada. Cuando la llamada haya finalizado, el Meeting Mate TM continuará reproduciendo música. Para rechazar una llamada entrante, mantenga pulsado el botón de reproducción/pausa . Para silenciar el micrófono durante una llamada, pulse el botón de silenciamiento del micrófono. Guide d’utilisation rapide de Meeting Mate MD (Français) Pour obtenir le guide d'utilisation complet, les dernières informations sur ce produit et son enregistrement, veuillez visiter ionaudio.com . Pour de l’assistance supplémentaire, veuillez visiter ionaudio.com/support . Pour obtenir toutes les informations relatives à la garantie, visitez ionaudio.com/warranty . Contenu de la boîte Meeting Mate MD Support Câble micro-USB (100 cm) Guide d’utilisation rapide Remarque : Veuillez vous assurer d'avoir complètement chargé la batteri e du produit avant sa première utilisation. L’appareil a été expressément expédié avec une charge de batterie réduite afin d’assurer un transport sécuritaire. Caractéristiques Panneau supérieur A . Touche de mise en sourdine du microphone : Cette touche permet de mettre le microphone intégré en sourdine et de le réactiver (située sous la touche d'alimentation). Lorsque le microphone est en sourdine, la DEL de mise en sourdine sous cette touche de vient rouge. B. Touche d’égalisation : Cette touche permet de parcourir les modes d’égalis ation, indiqués par les me ssages vocaux — (1) "Music" (musique) et (2) "Voice" (voix). C. Touche Bluetooth ® : Maintenir cette touche enfoncée permet de déjumeler un appareil Bluetooth. Lorsqu'elle est connectée à un appareil Bluetooth, la DEL Bl uetooth sous cette touche devient bleue. D. Touche d’alimentation : Maintenir cette touche enf…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 1/1 Letter of Authorization ION Audio, LLC Company: ION Audio, LLC Address: 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Product Name: Wireless Speaker with BUILT-IN Microphone For Home and Office Model Number: MEETING MATE FCC Identifier: 2AB3E-ISP132 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jacky Liao Date: 2021/02/03 Title: Senior Compliance Manager Signature of applicant:

C5266091_X10_Ed.1 1/1 ION Audio, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2021/02/03 Subject: Request for Confidentiality FCC ID: 2AB3E-ISP132 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jacky Liao Title: Senior Compliance Manager

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 63 of 76 16. Photos of the EUT Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 64 of 76 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 65 of 76 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 66 of 76 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 67 of 76

Revision v1.0 版本 Date: 2020-12-11 日期 Model No: ISP132 型号 Sheet of Drawn By Liu Fei Feng File 文件: Size 尺寸 1 AA BB CC DD 1 2 2 3 3 4 4 5 5 6 6 MEETING MATE iSP132 ISP132 CAN ICES-003(B)/NMB-003(B) ISP132

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 68 of 76 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 69 of 76 PCB Mainboard 1: Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 70 of 76 PCB Mainboard 2: Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT -R20092327-1E2 Page 71 of 76 BT Antenna 2 AC6926A AC6926A Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 72 of 76 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 73 of 76 BT Antenna 1 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 74 of 76 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 75 of 76 Magnetic ring: V180147T (K8 T17.5*15*9.5) Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 76 of 76 END OF REPORT

Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20092327-1E6 Page 1 of 6 RF EXPOSURE REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : Wireless Speaker with BUILT-IN Microphone For Home and Office Model No. : MEETING MATE Trade Mark : FCC ID : 2AB3E-ISP132 Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. ■Report No.: DDT-R20092327-1E6 ■Issued Date: Feb. 01, 2021 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20092327-1E6 Page 2 of 6 Table of Contents Test report declares........................................................................................................3 1. General Information ....................................................................................................... 5 1.1. Description of equipment ............................................................................................... 5 1.2. Assess laboratory ........................................................................................................... 5 2. RF Exposure Evaluation ................................................................................................ 5 2.1. Requirement ................................................................................................................... 5 2.2. Calculation method......................................................................................................... 6 2.3. Estimation result ............................................................................................................. 6 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT -R20092327-1E6 Page 3 of 6 Test Report Declare Standard Used: KDB447498 D01 General RF Exposure Guidance v06 We Declare: The equipment described above is assessed by Dongguan Dongdian Testing Service Co., Ltd and i n the configuration assessed the equipment complied with the standards specified above. The asse ssed res ults are contained in this report and Dongguan Dongdian Testing Service Co., Ltd is assumed of full responsibility for the accuracy and completeness of these assess. After evaluation, our opinion is that the equipment In Accordance with above stand ard. Report No: DDT -R20092327-1E6 Date of Receipt: Nov . 08 , 2020 Date of Test: Nov . 08 , 2020 ~ Feb . 01 , 2021 Prepared By: Approved By: ______ _________ _____ ________________ Sam Li/ Engineer Damon Hu/EMC Manager Note: This report applies to above tested sample only. This report shall not be reproduced in parts without written approval of Dongguan Dongdian Testing Service Co., Ltd. Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : Wireless Speaker with BUILT-IN Microphone For Home and Office Model No. : MEETING MATE Trade mark : Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20092327-1E6 Page 4 of 6 Revision History Rev. Revisions Issue Date Revised By --- Initial issue Feb. 01, 2021 Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20092327-1E6 Page 5 of 6 1. General Information 1.1. Description of equipment 1.2. Assess laboratory Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, http://www.dgddt.com, Email: [email protected] CNAS Registration No. CNAS L6451; A2LA Certificate Number: 3870.01; FCC Designation Number: CN1182; FCC Test Firm Registration Number: 540522 Industry Canada Site Registration Number: 10288A-1 2. RF Exposure Evaluation 2.1. Requirement Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. Limits for General Population/Uncontrolled Exposure EUT* Name : Wireless Speaker with BUILT-IN Microphone For Home and Office Model Number : MEETING MATE EUT function description : Please reference user manual of this device Power Supply : DC 5V by external AC Adapter or Laptop DC 7.4V Polymer Li-ion built-in battery Radio Specification : Bluetooth V5.0 Operation Frequency : 2402 MHz - 2480 MHz Modulation : GFSK, /4-DQPSK, 8DPSK Data Rate : 1 Mbps, 2 Mbps, 3 Mbps Antenna Type : Antenna 1: Dedicated FPC antenna, maximum PK gain: 3.99 dBi Antenna 2: Integral PCB antenna, maximum PK gain: -0.58 dBi Serial Number : N/A Dongguan Dongdian Testing Service Co., Ltd Report No.:DDT-R20092327-1E6 Page 6 of 6 2.2. Calculation method From the peak EUT RF output power, the minimum mobile separation distance, d= 0.2 m, as well as the gain of the used antenna, the RF power density can be obtained. 2.3. Estimation result Mode PK Output power (dBm) Output power (mW) Antenna Gain (dBi) Antenna Gain (linear) MPE Values (mW/cm 2 ) MPE Limit (mW/cm 2 ) Bluetooth Max power -2.94 0.51 3.99 2.51 0.0025 1 Note: The estimation distance is 20 cm Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. END OF REPORT

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 1 of 60 FCC AND ISED CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : Wireless Speaker with BUILT-IN Microphone For Home and Office Model No. : MEETING MATE Project Code iSP132 Trade Mark : FCC ID : 2AB3E-ISP132 IC : 10541A-ISP132 Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. ■Report No.: DDT-R20092327-1E2 ■Issued Date: Feb. 01, 2021 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 2 of 60 Table of Contents Test report declares........................................................................................................4 1. Summary of Test Results ............................................................................................... 6 2. General Test Information ............................................................................................... 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 8 2.3. Assistant equipment used for test .................................................................................. 8 2.4. Block diagram of EUT configuration for test .................................................................. 8 2.5. Deviations of test standard ............................................................................................. 8 2.6. Test environment conditions .......................................................................................... 9 2.7. Test laboratory................................................................................................................ 9 2.8. Measurement uncertainty ............................................................................................... 9 3. Equipment Used During Test ....................................................................................... 10 4. Maximum Peak Output Power ..................................................................................... 12 4.1. Block diagram of test setup .......................................................................................... 12 4.2. Limits ............................................................................................................................ 12 4.3. Test procedure ............................................................................................................. 12 4.4. Test result ..................................................................................................................... 12 4.5. Original test data .......................................................................................................... 13 5. 20 dB Bandwidth and 99% Bandwidth ......................................................................... 15 5.1. Block diagram of test setup .......................................................................................... 15 5.2. Limits ............................................................................................................................ 15 5.3. Test procedure ............................................................................................................. 15 5.4. Test result ..................................................................................................................... 15 5.5. Original test data .......................................................................................................... 16 6. Carrier Frequency Separation ...................................................................................... 18 6.1. Block diagram of test setup .......................................................................................... 18 6.2. Limits ............................................................................................................................ 18 6.3. Test procedure ............................................................................................................. 18 6.4. Test result ..................................................................................................................... 18 6.5. Original test data .......................................................................................................... 19 7. Number of Hopping Channel ....................................................................................... 20 7.1. Block diagram of test setup .......................................................................................... 20 7.2. Limits ............................................................................................................................ 20 7.3. Test procedure ............................................................................................................. 20 7.4. Test result ..................................................................................................................... 20 7.5. Original test data .......................................................................................................... 20 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 3 of 60 8. Dwell Time ................................................................................................................... 22 8.1. Block diagram of test setup .......................................................................................... 22 8.2. Limits .............................................................…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E4 Page 1 of 60 FCC AND ISED CERTIFICATION TEST REPORT FOR Issued By: Dongguan Dongdian Testing Service Co., Ltd. Add.: No. 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel.: +86-0769-38826678, E-mail: [email protected], http://www.dgddt.com Applicant : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. Equipment under Test : Wireless Speaker with BUILT-IN Microphone For Home and Office Model No. : MEETING MATE Project Code iSP132 Trade Mark : FCC ID : 2AB3E-ISP132 IC : 10541A-ISP132 Manufacturer : ION Audio, LLC Address : 200 Scenic View Drive, Cumberland, RI 02864 U.S.A. ■Report No.: DDT-R20092327-1E4 ■Issued Date: Feb. 01, 2021 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E4 Page 2 of 60 Table of Contents Test report declares........................................................................................................4 1. Summary of Test Results ............................................................................................... 6 2. General Test Information ............................................................................................... 7 2.1. Description of EUT ......................................................................................................... 7 2.2. Accessories of EUT ........................................................................................................ 8 2.3. Assistant equipment used for test .................................................................................. 8 2.4. Block diagram of EUT configuration for test .................................................................. 8 2.5. Deviations of test standard ............................................................................................. 8 2.6. Test environment conditions .......................................................................................... 9 2.7. Test laboratory................................................................................................................ 9 2.8. Measurement uncertainty ............................................................................................... 9 3. Equipment Used During Test ....................................................................................... 10 4. Maximum Peak Output Power ..................................................................................... 12 4.1. Block diagram of test setup .......................................................................................... 12 4.2. Limits ............................................................................................................................ 12 4.3. Test procedure ............................................................................................................. 12 4.4. Test result ..................................................................................................................... 12 4.5. Original test data .......................................................................................................... 13 5. 20 dB Bandwidth and 99% Bandwidth ......................................................................... 15 5.1. Block diagram of test setup .......................................................................................... 15 5.2. Limits ............................................................................................................................ 15 5.3. Test procedure ............................................................................................................. 15 5.4. Test result ..................................................................................................................... 15 5.5. Original test data .......................................................................................................... 16 6. Carrier Frequency Separation ...................................................................................... 18 6.1. Block diagram of test setup .......................................................................................... 18 6.2. Limits ............................................................................................................................ 18 6.3. Test procedure ............................................................................................................. 18 6.4. Test result ..................................................................................................................... 18 6.5. Original test data .......................................................................................................... 19 7. Number of Hopping Channel ....................................................................................... 20 7.1. Block diagram of test setup .......................................................................................... 20 7.2. Limits ............................................................................................................................ 20 7.3. Test procedure ............................................................................................................. 20 7.4. Test result ..................................................................................................................... 20 7.5. Original test data .......................................................................................................... 20 Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E4 Page 3 of 60 8. Dwell Time ................................................................................................................... 22 8.1. Block diagram of test setup .......................................................................................... 22 8.2. Limits .............................................................…

Text truncated - open the document above for the full version.

Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 61 of 76 15. Test Setup Photograph Dongguan Dongdian Testing Service Co., Ltd. Report No.: DDT-R20092327-1E2 Page 62 of 76