2AB96RF-01RF Remote Control (8 Key)

Manual ON/OFF: Power control key LIGHT: Select the colot key.red or green F: Flashing function key T: Cancel the timing function key 2H: Time 2 hours 4H: Time 4 hours 6H: Time 6 hours 8H: Time 8 hours Size: 85x37x16.5mm 1. Technical parameter of the remote control: 1.1 Working frequency: 433.92Mhz; 1.2 Transmit power: 1.3 Working voltage: 12V23A 1.4 Distance: 15m(free open area); 1.5 Standby current of the sender: 3uA; 3. Learning method: 3.1 Keep pressing the remote button(any of 1~8) want to learn, at the mean time, press the learn button of the receiver, the led on the receiver will flash one time, means the code has been learnt successfully. Now release the remote button to finish the learning. 2.2 One receiver will learn one button(any of 1~8) only, if learn more than one time, the last learning is the valid one. 2.3 Remote button 1~8 can learn individually with 8 different receivers, they will not affect each other. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for comp liance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferen ce to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/ TV technician for help.

Max-plus CO.,LTD FCC Authorization Letter Number: CF304 Version: V03 Date: 01-08-2011 We, (the approval holder) Company name Max-plus CO.,LTD Address PingNan industry zone,SanXiang town, City ZhongShan city,GuangDong Country China declare that the following representative (agent): Name (person) Tony Wu Company name Bontek Compliance Laboratory Co., Ltd. Address 1/F, Block East H-3,OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, City Shenzhen,Guangdong Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description RF remote control (8 key) Type or Model(s) RF-01 Tradename or Brand(s) N/ A We also authorize Teleconformity (Mr. M. Koop, Manager Certification, Address: Rietven 31, 7534NH Enschede, the Netherlands) to apply and sign this application for certification, registration or filing on our behalf (as representative agent or certifier). Attestation: City and Country: Date: Name: (this must be a person) Function:Signature: (or official company stamp) ZhongShan 2014-04-20 Xiongligao Manager

External Photographs EUT –Front View EUT – Rear View EUT – Side View EUT – Battery Cover Open View

FCC ID Location FCC ID Location

FCC ID Label Sample for FCC ID: 2AB96RF-01 Max-plus CO.,LTD Model: RF-01 FCC ID: 2AB96RF-01

Internal Photographs EUT - Open View EUT - PCB Top View Antenna Location

Test Report of FCC Part 15 C for FCC Certificate On Behalf of Max-plus CO.,LTD Product description: RF remote control (8 key) Model No.: RF-01 FCC ID: 2AB96RF-01 Prepared for: Max-plus CO.,LTD PingNan industry zone,SanXiang town,ZhongShan city, GuangDong province,China Prepared by: Bontek Compliance Testing Laboratory Ltd 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen, China Tel: 86-755-86337020 Fax: 86-755-86337028 Report No.: BCT14DR097E Issue Date: April 18, 2014 Test Date: April 17~ 18, 2014 Test by: Reviewed By: Lion Cai Owen Yang Report No.: BCT14DR097E Page 2 of 21 FCC ID: 2AB96RF-01 TABLE OF CONTENTS 1．GENERAL INFORMATION ........................................................................................................................................ 4 1.1 Product Description for Equipment Under Test (EUT) .............................................................. 4 1.2 Test Standards........................................................................................................................... 4 1.3 Test Facility ................................................................................................................................ 4 2. SYSTEM TEST CONFIGURATION .............................................................................................................................. 6 2.1 EUT Configuration ..................................................................................................................... 6 2.2 EUT Exercise ............................................................................................................................. 6 2.3 General Test Procedures .......................................................................................................... 6 2.4 Measurement Uncertainty ......................................................................................................... 6 2.5 Test Equipment List and Details ................................................................................................ 7 3. SUMMARY OF TEST RESULTS.................................................................................................................................. 8 4．DISTURBANCE VOLTAGE AT THE MAINS TERMINALS ........................................................................................ 9 4.1 Measurement Uncertainty ......................................................................................................... 9 4.2 Applicable Standard ................................................................................................................... 9 4.3 Test Description ......................................................................................................................... 9 5. RADIATED DISTURBANCES .................................................................................................................................... 10 5.1 Measurement Uncertainty ....................................................................................................... 10 5.2 Limit of Radiated Disturbances ............................................................................................... 10 5.3 EUT Setup ............................................................................................................................... 10 5.4 Test Receiver Setup ................................................................................................................ 11 5.5 Test Procedure ........................................................................................................................ 11 5.6 Corrected Amplitude & Margin Calculation ............................................................................. 12 5.7 Field Strength Calculation ....................................................................................................... 12 5.8 Radiated Emissions Test Result ............................................................................................. 12 6. 20DB BANDWIDTH .................................................................................................................................................... 15 6.1 Measurement Uncertainty ....................................................................................................... 15 6.2 Limit of 20dB Bandwidth .......................................................................................................... 15 6.3 EUT Setup ............................................................................................................................... 15 6.4 Test Procedure ........................................................................................................................ 15 6.5 Emissions within Band Edges Test Result .............................................................................. 16 7. DUTY CYCLE ............................................................................................................................................................. 17 7.1 Measurement Uncertainty ....................................................................................................... 17 7.2 EUT Setup ............................................................................................................................... 17 7.3 Test Procedure ........................................................................................................................ 17 7.4 Measurement Result ................................................................................................................ 17 8. TRANSMISSION TIME ............................................................................................................................................... 20 8.1 Measurement Uncertainty ....................................................................................................... 20 Report No.: BCT14DR097E Page 3 of 21 FCC ID: 2AB96RF…

Text truncated - open the document above for the full version.

Radiated emission