2AB9G-GP2012CBCall Button

FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Shen Zhen Gofine Electric Co., LTD PHOENIX TEST-LAB GmbH Product Certification Königswinkel 10 D 32825 Blomberg Date: 28.04.2014 Authority to Act as an Agent We declare that the following representative (agent) Name Mark Wen Position General Manager Company Name Most Technology Service Co., Ltd. Address No.5, 2 nd Langshan Road, North District, Hi-Tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel / Fax 86-755-86170306/86-755-86170310 E-Mail [email protected] to act on our behalf on all matters concerning the application and documents submitted to PHOENIX TEST-LAB for product certification below Product Name Call button Model Name GP2012CB Brand Name N/A Yours sincerely, Signatory Name Lawrence Position Company Name Shen Zhen Gofine Electric Co., LTD Address Block B, 3/F, JingFu Building Aircity industrial Park, GuShu, BaoAn Tel / Fax +86-13392185199 E-Mail [email protected] In case of FCC, we certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance.

Shen Zhen Gofine Electric Co., LTD Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Request for Confidentiality Company name: Shen Zhen Gofine Electric Co., LTD FCC ID: 2AB9G-GP2012CB FCC Part 15 Certification Gentlemen, Pursuant to 47 CFR 0.457(d)(1)(ii) and 0.459 we hereby requests permanent confidentiality of the following documents for the subject application: Exhibit Type Description ☒ Schematics All circuitry of devices and component values ☒ Block Diagrams Details of device showing the frequency of all oscillators ☐ Bill Of Materials Parts list of the product for the radio device ☒ Operational Description Description of the circuit functions Note: Exhibit types that are commonly held confidential are: (1) Schematics, (2) Block Diagrams, (3) Bill Of Materials, (4) Operational Descriptions. Any exhibit NOT granted confidentiality is viewable on the FCC website as soon as a grant is issued. These documents contain detailed system and equipment description and related information about the product which we considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evolve, we consider that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours sincerely, Signatory Name Lawrence Position Company Name Shen Zhen Gofine Electric Co., LTD Address Block B, 3/F, JingFu Building Aircity industrial Park, GuShu, BaoAn Tel / Fax +86-13392185199 E-Mail [email protected]

Model No.: GP2012CB Page 1 of 4 FRONT VIEW OF SAMPLE BACK VIEW OF SAMPLE Model No.: GP2012CB Page 2 of 4 LEFT VIEW OF SAMPLE RIGHT VIEW OF SAMPLE Model No.: GP2012CB Page 3 of 4 UP VIEW OF SAMPLE DOWN VIEW OF SAMPLE Model No.: GP2012CB Page 4 of 4 PHOTO OF THE ENTIRE SAMPLE-1

FCC ID Label Location

Model No.: GP2012CB Page 1 of 2 INTERNAL PHOTO OF SAMPLE – 1 INTERNAL PHOTO OF SAMPLE – 2 Model No.: GP2012CB Page 2 of 2 INTERNAL PHOTO OF SAMPLE –3

FCC 47 CFR PART 15 SUBPART C TEST REPORT For Applicant : Shen Zhen Gofine Electric Co., LTD Address : B Block, 3/F, JingFu Building, Aircity industrial Park, GuShu, BaoAn , ShenZhen Product Name : Call button Model Name : GP2012CB Brand Name : N/A FCC ID : 2AB9F-GP2012CB Report No. : MTE/SAL/F14040361 Date of Issue : Apr. 28, 2014 Issued by :Most Technology Service Co., Ltd. Address : No.5, Langshan 2nd Road, North District, Hi-tech Industrial Park, Nanshan, Shenzhen, Guangdong, China Tel : 86-755-8617 0306 Fax : 86-755-8617 0310 The report consists 21 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by MOST. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. FCC ID: 2AB9F-GP2012CB Report No.: MTE/SAL/F14040361 Page 2 of 21 TABLE OF CONTENTS 1．VERIFICATION OF CONFORMITY ........................................................................................ 3 2. GENERAL INFORMATION....................................................................................................... 4 2.1 Product Information ................................................................................................................ 4 2.2 Objective ................................................................................................................................ 5 2.3 Test Standards and Results .................................................................................................... 5 2.4 Environmental Conditions....................................................................................................... 5 3. TEST METHODOLOGY ........................................................................................................... 6 3.1 TEST FACILITY...................................................................................................................... 6 3.2 GENERAL TEST PROCEDURES .......................................................................................... 6 4 SETUP OF EQUIPMENT UNDER TEST .................................................................................. 8 4.1 SETUP CONFIGURATION OF EUT....................................................................................... 8 4.2 SUPPORT EQUIPMENT ........................................................................................................ 8 4.3 TEST EQUIPMENT LIST........................................................................................................9 5. 47 CFR Part 15 C Requirements............................................................................................ 10 5.1 Radiated Emission ............................................................................................................... 10 5.1.1 Definition ........................................................................................................................... 10 5.1.2 Test Configuration...............................................................................................................11 5.1.3 Test Description ................................................................................................................. 12 5.1.4 Test Result......................................................................................................................... 12 5.2 20dB Bandwidth ................................................................................................................... 16 5.2.1 Requirement...................................................................................................................... 16 5.2.2 Test Description ................................................................................................................. 16 5.2.3 Test Result .....................................................................................................................16 5.3 Transmission Cease Time ....................................................................................................17 5.3.1 Requirement...................................................................................................................... 17 5.3.2 Test Description ................................................................................................................. 17 5.3.3 Test Result......................................................................................................................... 17 5.4 Antenna Requirement........................................................................................................... 19 5.4.1 Definition ........................................................................................................................... 19 5.4.2 Evaluation Criteria ............................................................................................................. 19 5.4.3 Evaluation Results............................................................................................................. 19 APPENDIX 1 .............................................................................................................................. 20 PHOTOGRAPHS OF TEST SETUP........................................................................................... 20 FCC ID: 2AB9F-GP2012CB Report No.: MTE/SAL/F14040361 Page 3 of 21 1．VERIFICATION OF CONFORMITY Equipment Under Test: Call button Brand Name: N/A Model Number: GP2012CB FCC ID： 2AB9F-GP2012CB Shen Zhen Gofine Electric Co., LTD Applicant: B Block, 3/F, JingFu Building, Aircity industrial Park, GuShu, BaoAn , ShenZhen Shen Zhen Gofine Electric Co., LTD Manufacturer: B Block, 3/F, JingFu Building, Aircity industrial Park, GuShu, BaoAn , ShenZhen Technical Standards: 47 CFR Part 15 Subpart C File…

Text truncated - open the document above for the full version.

Model No.: GP2012CB SPURIOUS EMISSION TEST SETUP