2ABAMSNSESense

Handling Information: Sense is intended for indoor use at reasonable temperatures. Use a soft, clean, lint­free cloth to clean Sense. Do not clean Sense or its components while they are connected to a power source. Do not use liquids or abrasive solutions. Sense is not waterproof. Battery disposal: Please recycle or dispose of your battery according to your local laws and regulations. Underwriters Laboratories (UL) The Sense power adapter has been tested to comply with safety standards in the United States set out by Underwriters Laboratories Inc. (UL). The Sense power adapter complies with the following UL standards: UL 60950­1 and CAN/CSA C22.2 No. 60950­1­07 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Important: Changes or modifications not expressly approved by Hello, Inc. could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co­located or operated in conjunction with any other antenna or transmitter. ​Sense should be installed and operated with a minimum distance of 20 centimeters between the transmitter and your body. Canadian Regulatory Statement This device complies with Industry Canada licence­exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Sense and Sleep Pill meet the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS­102 RF exposure. Users can obtain Canadian information on RF exposure and compliance at ​http://www.ic.gc.ca The Sense transmitter must not be co­located or operating in conjunction with any other antenna or transmitter. Sense should be installed and operated with a minimum distance of 20 centimeters between the transmitter and your body. This Class B digital apparatus complies with Canadian ICES­003. Cet appareil est conforme à la/aux norme(s) RSS sur l’exemption de licence d’Industrie Canada. Son utilisation est subordonnée aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences et (2) il doit accepter toute interférence, y compris les interférences pouvant perturber son fonctionnement. Sense and Sleep Pill est conforme à l’exemption des limites d’évaluation de routine figurant à la section 2.5 de la norme RSS 102 et à la norme RSS­102 sur l’exposition aux RF. Les utilisateurs peuvent s’informer sur les règles canadiennes en matière d’exposition aux RF et de conformité sur​ ​http://www.ic.gc.ca L’émetteur Sense ne doit être co­implanté ou utilisé en conjonction avec aucune autre antenne ou aucun autre émetteur. Sense doit être installé et utilisé en ménageant une distance d’au moins 20 centimètres entre l’émetteur et vous. Cet appareil numérique de Classe B est conforme à la norme ICES­003 du Canada. CE Certification Hello, Inc. is authorized to apply the CE Mark to its Sense and Sleep Pill products, thereby declaring conformity to the relevant provisions of the following directives: EMC Directive 2004/108/EC Low Voltage Directive 2006/95/EC R&TTE Directive 1999/5/EC Ecodesign requirements for Energy Related Products Directive 2009/125/EC RoHS Recast Directive 2011/65/EU The CE mark for the Sleep Pill is located inside the battery compartment on its bottom panel. European Union Disposal and Recycling – Information for Users [Insert symbol of rubbish bin​] This symbol means your product should not be disposed of with your normal household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information about how to dispose of your Sense waste equipment, please contact your household waste disposal service. Élimination et recyclage de l’Union européenne – Informations aux usagers Ce symbole signifie que votre produit ne doit pas être éliminé avec vos ordures ménagères habituelles. Vous devez plutôt confier la mise au rebut de votre dispositif à un point de collecte désigné pour le recyclage des déchets d’équipements électriques et électroniques, de manière à protéger la santé humaine et l’environnement. Pour obtenir d’autres informations sur la façon d’éliminer votre dispositif Sense usagé, veuillez contacter votre service d’élimination des ordures ménagères. Australia/New Zealand Regulatory Compliance Mark (RCM) Hello, Inc. is authorized to apply the RCM mark to its Sense and Sleep Pill products, thereby de…

Text truncated - open the document above for the full version.

Sense System Sense Overview Outline: The first system for understanding your sleep and bedroom. Sense is a simple system that tracks your sleep, monitors the environment in your bedroom and reinvents the alarm, so you can sleep better. Sense sits on your bedside table and combines the insight of your sleep patterns with the data of the environment in your bedroom, including noise, light, temperature, humidity and particles in the air. When you know what helps or hinders your sleep, you can fix it. [Sense] Final Content: Sense is a simple system that tracks your sleep, monitors the environment in your bedroom and reinvents the alarm, so you can sleep better. Sense sits on your bedside table and tracks the data of the environment in your bedroom, including noise, light, temperature, humidity and particles in the air. While the Sleep Pill clips onto your pillow and monitors how you sleep. If you truly want to understand your sleep and improve it, you need to know about the room you sleep in and how that impacts your sleep. Tracking just your sleep cycles does not suffice. Sense from Hello has been built to change that. Sleep Pill Overview Outline: Sense comes with a little device called a Sleep Pill. It simply attaches to your pillow and invisibly tracks your sleep at night. Sense knows when you're falling asleep, soundly asleep, thrashing about, or waking up. All this is possible with the highly sensitive accelerometer and gyroscope inside the Sleep Pill, which clips discretely, and securely, onto your pillow. Final Content: Sense comes with a little device called a Sleep Pill. It simply attaches to your pillow and invisibly tracks your sleep at night. Sense knows when you're falling asleep, soundly asleep, thrashing about, or waking up. All this is possible with the highly sensitive accelerometer and gyroscope inside the Sleep Pill, which clips discretely, and securely, onto your pillow. Smart Alarm Overview Outline: Waking up every morning should feel great every morning. With Sense's Smart Alarm, you are awakened by one of ten sounds composed just for Sense to help you wake up. Each one of these awakening sounds is designed to wake you up in the most natural way possible, not like the alarm clock you're used to. Sense will wake you when you are in the lightest part of your sleep cycle within 30 minutes prior to the time you set. That way, you wake up at the right time for you. Final Content: Waking up should feel great. Sense's Smart Alarm is designed to wake you up in the most natural way possible, not like the alarm clock you're used to. Sense will wake you when you are in the lightest part of your sleep cycle within 30 minutes prior to the time you set. That way, you wake up at the right time for you. You’ll be able to choose from ten custom alarm tones. Sense App Overview Outline: The Sense iOS and Android applications tell you everything you need to know about your night. Sense interprets the data from your sleep and your bedroom and gives you a detailed timeline of the events that occurred during that time. You’ll be able to see everything, from tossing and turning, to car alarms going off. If you enable enhanced audio, Sense will detect noise disturbances such as snoring and sleep talking, tell you at what time it happened and playback an audio clip. You will also see your unique Sleep Score, insights to help you sleep better and be able to set your smart alarm. Final Content: The Sense iOS and Android applications tell you everything you need to know about your night. Sense interprets the data from your sleep and your bedroom and gives you a detailed timeline of the events that occurred during that time. You’ll be able to see everything, from tossing and turning, to car alarms going off. If you enable enhanced audio, Sense will detect noise disturbances such as snoring and sleep talking, tell you at what time it happened and playback an audio clip. You will also see your unique Sleep Score, insights to help you sleep better and be able to set your smart alarm. Accessories Overview Outline: Sense Sleep Pill Micro USB Cable USB Power Adapter Documentation [show the intro to ‘setting up Sense’ video] Final Content: What you’ll find inside Your Sense A Sleep Pill Power adaptor Cable Instructions on how to get started Getting Started Where to get the App Outline: Intro to why you need the app. Get the app: senseapp.com Play Store [link] App Store [link] Final Content: To set-up Sense, you will first need to download the Sense app which you can find at: senseapp.com Play store link App Store link The app will guide you through the set-up process. The app is where all your sleep data is stored - you’ll be able to see your Timeline, Trends and Sleep Insights. You’ll also be able to set your Smart Alarm. Setup Sense Overview Outline: [Video] Step by Step instructions Final Content: 1. Place your Sense on a nightstand next to your bed. 2. Attach the cable to the USB port on the adaptor and plug it in. The micro USB end inserts at the base of Sense. 3. Sense will glow purple indicating that it’s ready to be paired. 4. You’ll first need to download the Sense app from our website at https://senseapp. com. 5. The app will prompt you to set up an account and give us a few details about yourself. These details will help ensure the accuracy of your sleep insights. Now, you can pair your phone with Sense. Make sure you have your phone’s Bluetooth turned on. 6. Next, choose your WiFi network and enter your password. 7. Now, you’ll need to pair your Sleep Pill to Sense. 8. Your Sleep Pill stays on your pillow so it can track your sleep. 9. Then you’ll shake your Sleep Pill for three seconds. Sense will glow white when your Sleep Pill is connected. 10.To attach your Sleep Pill hold the edge of your pillowcase taut and slide on your Sleep Pill. It’s a snug fit to make sure it doesn’t fall off. 11.Last but not least, you can set your first Smart Alarm. Now you’re all set up, and ready for a good night…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: Hello Inc Address: 1660 17th Street City: San Francisco State: California Country: United States Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan City: Taipei Country: Taiwan is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s): Product description: Sense Type designation: MA14214 Trademark: Hello on our behalf. Date: 2015-01-29 City: San Francisco Name: Scott Bartlett Function: Director of Hardware Signature: ............................... Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 Company Name: Hello Inc Address : 1660 17th Street City: San Francisco Country: United States To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentialit y FCC ID: 2ABAMSNSE Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0. 459(a) & (b) , we hereby requests non-disclosure and confidential tr eatment of the follo wing material s submitted in support of FCC cer tificat ion applicat ion: Bill(s) of Material Bl ock Diagrams Operational Description Schematic Diagrams Tune-up Pr ocedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of thi s company confidential mat er ial to ot her parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the follo wing materials (note 1): Int er nal Photos User’s Manual Test Set-up Photos External Photos Justification: This document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor unfair advantage in the market. Pl anned Release Date STC: 45 days from date of grant (notes 2, 3, 4, 5) Date: 2015-01-29 Name and signature of applicant: Scott Bartlett Notes: 1) A document or type of document can only have ONE type of confidentialit y! 2) Short-Term confidentialit y is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlie r. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue 5 Page 1 of 1 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Project No.: 1501068 Page 2 of 27 Project No.: 1501068 Page 3 of 27 Project No.: 1501068 Page 4 of 27 Project No.: 1501068 Page 5 of 27 Project No.: 1501068 Page 6 of 27 Project No.: 1501068 Page 7 of 27 AMIGO Project No.: 1501068 Page 8 of 27 JQH

Project No.: 1501068 Page 9 of 27 Project No.: 1501068 Page 10 of 27 Project No.: 1501068 Page 11 of 27 Project No.: 1501068 Page 12 of 27 Project No.: 1501068 Page 13 of 27 Project No.: 1501068 Page 14 of 27 Project No.: 1501068 Page 15 of 27 Project No.: 1501068 Page 16 of 27 Project No.: 1501068 Page 17 of 27 Project No.: 1501068 Page 18 of 27 Project No.: 1501068 Page 19 of 27 Project No.: 1501068 Page 20 of 27 Project No.: 1501068 Page 21 of 27 Project No.: 1501068 Page 22 of 27 Project No.: 1501068 Page 23 of 27 Project No.: 1501068 Page 24 of 27 Project No.: 1501068 Page 25 of 27 Project No.: 1501068 Page 26 of 27 Project No.: 1501068 Page 27 of 27

FCC RF EXPOSURE REPORT FCC ID: 2ABAMSNSE Project No. : 1501068 Equipment : Sense Model : MA14214 Applicant : Hello Inc. Address : 1660, 17th St., San Francisco, CA 94107, United States According: : FCC Guidelines for Human Exposure IEEE C95.1 BTL Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Table for Filed Antenna Ant. Brand Model NameAntenna TypeConnector Gain(dBi) 1 N/A N/A Internal N/A -0.84 GENERAL CONCULUSION: Maximum measured transmitter power: OutputPower (dBm) Output Power (mW) Limit (mW) 3.11 2.05 10 According to FCC KDB447498 V05, Appendix A, SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm The maximum measured output peak power of this EUT is 2.05mW, less than 10mW at 5mm distance. Conclusion: No SAR evaluation required since transmitter power is below FCC threshold

Report No.: BTL-FCCP-2-1501115 Page 1 of 54 FCC Radio Test Report FCC ID:2ABAMPILL This report concerns (check one): Original Grant Class II Change Project No. : 1501115 Equipment : PILL Model Name : PA1436 Applicant : Hello Inc. Address : 1660, 17th St., San Francisco, CA 94107, United States Date of Receipt : Jan. 14, 2015 Date of Test : Jan. 14, 2015 ~ Jan. 28, 2015 Issued Date : Jan. 29, 2015 Tested by : BTL Inc. Testing Engineer : (Rush Kao) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) BTL INC. B1, No.37, Lane 365, Yang Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX: +886-2- 2657-3331 Report No.: BTL-FCCP-2-1501115 Page 2 of 54 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCCP-2-1501115 Page 3 of 54 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 TEST PROCEDURE 13 4.1.3 DEVIATION FROM TEST STANDARD 13 4.1.4 TEST SETUP 14 4.1.5 EUT OPERATING CONDITIONS 14 4.1.6 EUT TEST CONDITIONS 14 4.1.7 TEST RESULTS 14 4.2 RADIATED EMISSION MEASUREMENT 15 4.2.1 RADIATED EMISSION LIMITS 15 4.2.2 TEST PROCEDURE 16 4.2.3 DEVIATION FROM TEST STANDARD 16 4.2.4 TEST SETUP 17 4.2.5 EUT OPERATING CONDITIONS 18 4.2.6 EUT TEST CONDITIONS 18 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 18 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 19 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 19 5 . BANDWIDTH TEST 20 5.1 APPLIED PROCEDURES / LIMIT 20 5.1.1 TEST PROCEDURE 20 5.1.2 DEVIATION FROM STANDARD 20 5.1.3 TEST SETUP 20 5.1.4 EUT OPERATION CONDITIONS 20 5.1.5 EUT TEST CONDITIONS 20 5.1.6 TEST RESULTS 20 Report No.: BTL-FCCP-2-1501115 Page 4 of 54 Table of Contents Page 6 . MAXIMUM OUTPUT POWER TEST 21 6.1 APPLIED PROCEDURES / LIMIT 21 6.1.1 TEST PROCEDURE 21 6.1.2 DEVIATION FROM STANDARD 21 6.1.3 TEST SETUP 21 6.1.4 EUT OPERATION CONDITIONS 21 6.1.5 EUT TEST CONDITIONS 21 6.1.6 TEST RESULTS 21 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 22 7.1 APPLIED PROCEDURES / LIMIT 22 7.1.1 TEST PROCEDURE 22 7.1.2 DEVIATION FROM STANDARD 22 7.1.3 TEST SETUP 22 7.1.4 EUT OPERATION CONDITIONS 22 7.1.5 EUT OPERATION CONDITIONS 22 7.1.6 TEST RESULTS 22 8 . POWER SPECTRAL DENSITY TEST 23 8.1 APPLIED PROCEDURES / LIMIT 23 8.1.1 TEST PROCEDURE 23 8.1.2 DEVIATION FROM STANDARD 23 8.1.3 TEST SETUP 23 8.1.4 EUT OPERATION CONDITIONS 23 8.1.5 EUT TEST CONDITIONS 23 8.1.6 TEST RESULTS 23 9 . MEASUREMENT INSTRUMENTS LIST 24 ATTACHMENT A - CONDUCTED EMISSION 25 ATTACHMENT B - RADIATED EMISSION (9KHZ-30MHZ) 26 ATTACHMENT C - RADIATED EMISSION BETWEEN 30MHZ AND 1000MHZ) 28 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 31 ATTACHMENT E - BANDWIDTH 44 ATTACHMENT F - MAXIMUM OUTPUT POWER TEST 47 ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION 48 ATTACHMENT H - POWER SPECTRAL DENSITY TEST 52 Report No.: BTL-FCCP-2-1501115 Page 5 of 54 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FCCP-2-1501115 Original Issue. Jan. 29, 2015 Report No.: BTL-FCCP-2-1501115 Page 6 of 54 1. CERTIFICATION Equipment : PILL Brand Name : Hello Model Name : PA1436 Applicant : Hello Inc. Manufacturer : Jabil Circuit Address : 10560, Dr. Martin Luther King Jr. St. N., St. Petersburg, FL 33716, United States Factory : Jabil Circuit (GuangZhou) LTD. Address : 128, JunCheng Road, Eastern Zone, Guangzhou Economic and Technological Development District, 510530 Guangdong ProvInce, PRC Date of Test : Jan. 14, 2015 ~ Jan. 28, 2015 Test Sample : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C :2013 (15.247) / ANSI C63.4-2009 / FCC KDB Publication No. 558074 D01 DTS Meas Guidance v03r02 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1501115) were obtained utiliz ing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-2-1501115 Page 7 of 54 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): Applied Standard(s): FCC Part15 (15.247) , Subpart C Standard(s) Sectio…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-1501068 Page 1 of 144 FCC Radio Test Report FCC ID: 2ABAMSNSE This report concerns (check one): Original Grant Class II Change Project No. : 1501068 Equipment : Sense Model Name : MA14214 Applicant : Hello Inc. Address : 1660, 17th St., San Francisco, CA 94107, United States Date of Receipt : Jan. 14, 2015 Date of Test : Jan. 14, 2015~Jan. 28, 2015 Issued Date : Jan. 29, 2015 Tested by : BTL Inc. Testing Engineer : (Gary Chou) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) BTL INC. B1, No.37, Lane 365, Yang Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 Report No.: BTL-FCCP-2-1501068 Page 2 of 144 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C, or National Institute of Standards and Technology (NIST) of U.S.A. BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. BTL’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and BTL-self, extracts from the test report shall not be reproduced except in full with BTL’s authorized written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Report No.: BTL-FCCP-2-1501068 Page 3 of 144 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 12 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 TEST PROCEDURE 14 4.1.3 DEVIATION FROM TEST STANDARD 14 4.1.4 TEST SETUP 15 4.1.5 EUT OPERATING CONDITIONS 15 4.1.6 EUT TEST CONDITIONS 15 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 16 4.2.1 RADIATED EMISSION LIMITS 16 4.2.2 TEST PROCEDURE 17 4.2.3 DEVIATION FROM TEST STANDARD 17 4.2.4 TEST SETUP 17 4.2.5 EUT OPERATING CONDITIONS 18 4.2.6 EUT TEST CONDITIONS 18 4.2.7 TEST RESULTS (9KHZ TO 30MHZ) 19 4.2.8 TEST RESULTS (BETWEEN 30MHZ TO 1000 MHZ) 19 4.2.9 TEST RESULTS (ABOVE 1000 MHZ) 19 5 . BANDWIDTH TEST 20 5.1 APPLIED PROCEDURES 20 5.1.1 TEST PROCEDURE 20 5.1.2 DEVIATION FROM STANDARD 20 5.1.3 TEST SETUP 20 5.1.4 EUT OPERATION CONDITIONS 20 5.1.5 EUT TEST CONDITIONS 20 5.1.6 TEST RESULTS 20 Report No.: BTL-FCCP-2-1501068 Page 4 of 144 Table of Contents Page 6 . MAXIMUM PEAK CONDUCTED OUTPUT POWER TEST 21 6.1 APPLIED PROCEDURES / LIMIT 21 6.1.1 TEST PROCEDURE 21 6.1.2 DEVIATION FROM STANDARD 21 6.1.3 TEST SETUP 21 6.1.4 EUT OPERATION CONDITIONS 21 6.1.5 EUT TEST CONDITIONS 21 6.1.6 TEST RESULTS 21 7 . ANTENNA CONDUCTED SPURIOUS EMISSION 22 7.1 APPLIED PROCEDURES / LIMIT 22 7.1.1 TEST PROCEDURE 22 7.1.2 DEVIATION FROM STANDARD 22 7.1.3 TEST SETUP 22 7.1.4 EUT OPERATION CONDITIONS 22 7.1.5 EUT TEST CONDITIONS 22 7.1.6 TEST RESULTS 22 8 . POWER SPECTRAL DENSITY TEST 23 8.1 APPLIED PROCEDURES / LIMIT 23 8.1.1 TEST PROCEDURE 23 8.1.2 DEVIATION FROM STANDARD 23 8.1.3 TEST SETUP 23 8.1.4 EUT OPERATION CONDITIONS 23 8.1.5 EUT TEST CONDITIONS 23 8.1.6 TEST RESULTS 23 9 . MEASUREMENT INSTRUMENTS LIST 24 10 . EUT TEST PHOTO 26 ATTACHMENT A - CONDUCTED EMISSION 30 ATTACHMENT B - RADIATED EMISSION (9KHZ TO 30MHZ) 35 ATTACHMENT C - RADIATED EMISSION (30MHZ TO 1000MHZ) 38 ATTACHMENT D - RADIATED EMISSION (ABOVE 1000MHZ) 43 ATTACHMENT E - BANDWIDTH 116 ATTACHMENT F – MAXIMUM PEAK CONDUCTED OUTPUT POWER 123 ATTACHMENT G - ANTENNA CONDUCTED SPURIOUS EMISSION 125 ATTACHMENT H - POWER SPECTRAL DENSITY 138 Report No.: BTL-FCCP-2-1501068 Page 5 of 144 REPORT ISSUED HISTORY Issued No. Description Issued Date BTL-FCCP-2-1501068 Original Issue. Jan. 29, 2015 Report No.: BTL-FCCP-2-1501068 Page 6 of 144 1. CERTIFICATION Equipment : Sense Brand Name : Hello Model Name : MA14214 Applicant : Hello Inc. Manufacturer : Jabil Circuit Address : 10560, Dr. Martin Luther King Jr. St. N., St. Petersburg, FL 33716, United States Factory : Jabil Circuit (GuangZhou) LTD. Address : 128, JunCheng Road, Eastern Zone, Guangzhou Economic and Technological Development District, 510530 Guangdong Province, PRC Date of Test : Jan. 14, 2015~Jan. 28, 2015 Test Sample : ENGINEERING SAMPLE Standard(s) : FCC Part15, Subpart C: 2013 (15.247) / ANSI C63.4-2009 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. BTL-FCCP-2-1501068 ) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). Report No.: BTL-FCCP-2-1501068 Page 7 of 144 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): Applied Standard(s): FCC Part15 (15.247) , Subpart C: 2013 Standard(s) Section Test Item Judgme…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-1501068 Page 26 of 61 10. EUT TEST PHOTO Conducted Measurement Photos JQH Report No.: BTL-FCCP-1-1501068 Page 27 of 61 Radiated Measurement Photos 9KHz to 30MHz- JQH Report No.: BTL-FCCP-1-1501068 Page 28 of 61 Radiated Measurement Photos 30M to 1000MHz- JQH Report No.: BTL-FCCP-1-1501068 Page 29 of 61 Radiated Measurement Photos Above 1000MHz- JQH