2ABB5YUNEECGSFKRX18E-GO

crUiSER g u i d e INTRODUCTION 1 ENGLISH ENGLISH INDEX INTRODUCTION GARAGE FEATURES QUICK START SAFETY RIDING TIPS MAINTENANCE TROUBLESHOOTING REPLACEMENT PARTS WARRANTY TERMS AND CONDITIONS 01............................. 02............................. 03............................. 04............................. 05............................. 06............................. 07............................. 08............................. 09............................. 10............................. 11............................. 12............................. Congratulations, you have purchased an E-GO. You are now the owner of a portable, eco- friendly mode of transport that is incredibly fun to use. Integrating state of the art motor technology developed by YUNEEC for use in the aviation industry, E-GO brings to the streets an experience and convenience that was never available in the past. Setting aside dated conventions, E-GO focuses on what is essential to the design of a sus- tainable transport unit that functions in modern urban areas. Combining high performance with low consumption, E-GO CRUISER allows you to travel up to 40Km / 25M on one full charge. Its lightweight design and compact dimensions make the E-GO the perfect wingman wherever you go: just pick up your board and step into a taxi, bus, train or indoor location. Boarding is often linked to extreme sports` activities like surfing, skating or snowboarding and there are definetely similarities in the amount of freedom experienced when moving through space. However, E-GO is foremost a city transport unit and distinguishes itself as such especially by its incredible braking system, giving the rider the constant control over his / her vehicle required to ensure the safety of other people as well as his / her own. Keeping the latter in mind we would like to suggest you read through this user manual, ensuring you understand fully how to properly set-up and use your E-GO CRUISER and what general common sense to apply when riding in a public area. The general rule we personally tend to follow: Ride with consideration and style. We hope you enjoy your E-GO experience! 3 THE TRUCKS START 2 34 1 kingpin nut baseplate nut ENGLISH ENGLISH garage THE DECK UNDERNEATH THE DECK WE FIND THE E-GO`S MULTI CELLED BATTERY PACK, CONTAINING THE LATEST BATTERY TECHNOLOGY DEVELOPED AND PAT- ENTED BY YUNEEC. ITS FLEXIBLE CASING ALLOWS THE DECK TO BEND WHILE RIDING. THE BATTERY PACK charger port power button battery status indicator USB port 2.4G bluetooth 1. 2. 3. 4. 5. 12 3 4 5 2 THE E-GO CRUISER FEATURES A 20 MM SIX LAYERED MAPLE WOOD DECK. THIS MAKES IT STRONG, DURABLE AND FLEXIBLE: ALL THE QUALITIES A RIDER LOOKS FOR IN A BOARD. THE TOP IS FINISHED WITH GRIP TAPE TO MINIMIZE SLIPPING. THE motor DEVELOPED BY YUNEEC FOR USE IN THE AVIATION INDUSTRY,THE E-GO BRUSHLESS 450 WATT MOTOR PROVIDES RELIABLE AND EFFI- CIENT POWER FOR YOUR CRUISER. WITH A DIAMETER OF 90MM THE E-GO`S WHEELS ARE BIG ENOUGH TO SUSTAIN GRIP WHEN PUSHING THE THROTTLE FORWARD BUT SMALL ENOUGH TO INTEGRATE THE E-GO CRUISER INTO THE URBAN TRANS- PORT SYSTEM. THE WHEELS axle nut bearing CONNECTING THE WHEELS TO THE DECK ARE TWO ALLOW TRUCKS MADE OF THE FINEST GRADE MATERIALS AVAILABLE. THE TRUCKS CAN BE TWEAKED USING THE TRUCK TOOL. (For more on the truck tool see page 5) YUNEEC TECHNOLOGY 5 ENGLISH ENGLISH 4 7 START 7 89* 10 11 12 13 6 THE wireless CONTROLLER A KEY FEATURE OF THE E-GO IS WITHOUT A DOUBT ITS WIRELESS CONTROLLER WHICH ALLOWS YOU TO INTUITIVELY CON- TROL ITS` MOVEMENTS BY SIMPLY SLIDING THE TROTTHLE / BRAKE SLIDER UP AND DOWN. WHEN NOT RIDING ITS` SLICK AND COMPACT DESIGN SLIPS RIGHT INTO YOUR POCKET OR BAG, TAKING UP LESS SPACE THEN MOST CELL PHONES. START button throttle / brake torch light battery status indicator* direction switch gear switch torch light switch mini USB port 6. 7. 8. 9. 10. 11. 12. 13. 18 14 15 17 16 socket tool bolt tool nut tool kingpin bolt tool axle nut tool 14. 15. 16. 17. 18. TO KEEP YOUR E-GO'S PERFORMANCE UP TO MAXIMUM YOU WILL NEED TO DO REGULAR MAINTENANCE CHECKS (for more info on maintenance please check page ?), MAKING SURE THE BOARD IS NOT OBSTRUCTED BY DIRT AND ALL NUTS AND BOLTS ARE PROPERLY TIGH- TENED. TO TIGHTEN AND LOOSEN THESE NUTS AND BOLTS, YOUR E-GO CRUISER COMES WITH A SPECIFIC TOOL - THE TRUCK TOOL -THAT ALLOWS YOU TO DO THAT. IN GENERAL YOU SHOULD MAKE SURE ALL PARTS ARE SCREWED ON THERE NICE AND THIGHT, WITH THE EXCEPTION OF THE KINGPIN NUT WHICH CAN BE TWEAKED ACCORDING TO YOUR PERSONAL RIDING STYLE. THE TRUCK TOOL THE BATTERY STATUS INDICATORS` BLUE LIGHT INDICATES THE WIRELESS CONTROLLERS` BAT- TERY STATUS, ITS` GREEN LIGHT INDICATES THE BOARDS` BATTERY STATUS. WHEN ACTIVATED THESE LIGHTS WILL BLINK IN A SERIES OF 1, 2, 3 OR 4.EACH BLINK OF LIGHT STANDS FOR 25% OF TOTAL BATTERY CHARGE. THE THIRD LIGHT IS RED AND INDICATES EITHER BATTERY DEPLETION (WHEN ACTIVATED BUT NOT CHARGING) OR BATTERY CHARGE STATUS TO BE LESS THEN 100% (WHEN CHARGING). EXAMPLE: (WHEN ACTIVATED BUT NOT CHARGING) THE BOARDS`BATTERY IS COMPLETELY EMPTY AND THE CONTROLLERS` BATTERY HAS LESS THAN 75% OF ITS FULL CHARGE CAPACITY LEFT 4 RED BLINKS WILL BE FOLLOWED BY 2 BLUE BLINKS. TIGHTENING THE KINGPIN WILL GIVE A MORE STABLE, RIGID RIDE. LOOSENING THE KINGPIN BOLT WILL MAKE THE BOARD MORE MANOUVER- ABLE AND DECREASE THE DIAMETER OF YOUR TURN RADIUS, ALLOWING YOU TO TAKE SHAR- PER TURNS. 7 ENGLISH ENGLISH 6 quick start TO ENSURE A HEALTHY BATTERY LIFE, RECHARGE THE BATTERIES FOR 4 HOURS STRAIGHT BEFORE FIRST USE. THIS WILL CONDITION THE BATTERIES AND GIVE BETTER LONG TERM PERFORMANCE. charge status indicator THE E-GO CHARGER ALLOWS YOU TO FULLY RECHARGE THE E-GO AND THE CONTROLLERS` BATTERY IN 2 TO 3 HOURS, GIVING YOU A MAXIMUM RI- DING CAPACITY OF 40 KM / 24 MILES DISTANCE. THE CHARGER CONNECTS THE WIRELESS CONTROLLER TO THE BOARDS BATTERY PACK OR TO ANY COMPUTER OR OTHER USB PORT FOR RECHARGING PURPOSES. THE USB THE PIN TOOL ALSO INCLUDE…

Text truncated - open the document above for the full version.

YUNEEC International (China) Co., Ltd. Date: 2013-12-18 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2ABB5YUNEECGSFKRX18 ATTESTATION FCC ID: 2ABB5YUNEECGSFKRX18 Product: E-GO Model: Cruiser We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, __________________ Bin Zhang / Manager YUNEEC International (China) Co., Ltd.

RF_160, Issue 02 YUNEEC International (China) Co., Ltd. Declaration of Authorization We Name: YUNEEC International (China) Co., Ltd. Address: No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu City: ......... SuZhou ................................................................ Country:.........China ............................................................................ Declare that: Name Representative of agent: Gene Chang (1) Agent Company name: QuieTek Corp. Address: Fl.2, No.345, Xin-hu 2 nd City: Taipei Rd., Nei-hu District Country Taiwan is authorized to apply for Certification of the following product(s): Product description: E-GO Type designation: Cruiser on our behalf. Date: 2013-12-18 City: SuZhou Name: Bin Zhang (2) Function: Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

EUT Photograph (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo

YUNEEC International (China) Co., Ltd. No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Attestation for FCC Declaration of Conformity FCC ID: 2ABB5YUNEECGSFKRX18 Date: 2013/12/18 Please be notified that we, the undersigned, YUNEEC International (China) Co.,Ltd. declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DOC. And the DoC procedure shall be carried out prior to marketing the device in the US. The test report number supporting the DOC is 13A0238R-ITUSP01V02 Testing in regards to this report was done by QuieTek Corp., located at No.5-22, Rueishu Keng, Rueiping Tsuen, Linkou Shiang, Taipei County 244, Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, Bin Zhang/ Manager YUNEEC International (China) Co., Ltd.

YUNEEC International (China) Co., Ltd. Date: 2013-12-18 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2ABB5YUNEECGSFKRX18 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Confidentiality Request 1 Schematics 2 Block Diagram 3 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _________________________ Bin Zhang / Manager YUNEEC International (China) Co., Ltd.

(1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo

RF Exposure Evaluation Declaration Product Name : E-GO Model No. : Cruiser FCC ID : 2ABB5YUNEECGSFKRX18 IC : 11554A-Cruiser Applicant : YUNEEC International (China) Co., Ltd. Address : No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Date of Receipt : Sep. 23, 2013 Issued Date : Dec. 18, 2013 Report No. : 139S058R-RF-US-P20V01 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No: 139S058R-RF-US-P20V01 Page: 2 of 5 Test Report Certification Issued Date : Dec. 18, 2013 Report No. : 139S058R-RF-US-P20V01 Product Name : E-GO Applicant : YUNEEC International (China) Co., Ltd. Address : No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Manufacturer : YUNEEC International (China) Co., Ltd. Address : No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Model No. : Cruiser FCC ID : 2ABB5YUNEECGSFKRX18 IC : 11554A-Cruiser EUT Voltage : DC: 26.5V Brand Name : YUNEEC Applicable Standard : FCC OET 65 RSS-102: Issue 4, March, 2010 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : Reviewed By : Approved By : Report No: 139S058R-RF-US-P20V01 Page: 3 of 5 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. : BSMI, NCC, TAF Germany : TUV Rheinland Norway : Nemko, DNV USA : FCC Japan : VCCI China : CNAS Report No: 139S058R-RF-US-P20V01 Page: 4 of 5 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Report No: 139S058R-RF-US-P20V01 Page: 5 of 5 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°Cand 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : E-GO Test Item : RF Exposure Evaluation Test Site : AC-6 Antenna Gain: Antenna Gain: The maximum Gain measured in fully anechoic chamber is 5.4dBi for 2.4GHz and 3.0dBi for 5GHz in logarithm scale. Output Power into Antenna & RF Exposure Evaluation Distance: Frequency Band (MHz) Maximum Output Power to Antenna (mW) Power Density at R = 20 cm (mW/cm2) 2402- 2480 MHz 4.1305 0.002849 Note: The power density Pd (4th column) at a distance of 20 cm calculated from the Friis transmission formula is far below the limit of 1 mW/cm2. The End

Test Report FCC Part15 Subpart C Product Name : E-GO Model No. : Cruiser FCC ID : 2ABB5YUNEECGSFKRX18 IC : 11554A-Cruiser Applicant : YUNEEC International (China) Co., Ltd. Address : No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Date of Receipt : Sep. 23, 2013 Test Date : Sep. 23, 2013~Nov. 06, 2013 Issued Date : Dec. 18, 2013 Report No. : 139S058R-RF-US-P06V02 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, CNAS or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. Report No.: 139S058R-RF-US-P06V02 Page: 2 of 50 Test Report Certification Issued Date : Dec. 18, 2013 Report No. : 139S058R-RF-US-P06V02 Product Name : E-GO Applicant : YUNEEC International (China) Co., Ltd. Address : No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Manufacturer : YUNEEC International (China) Co., Ltd. Address : No.388, Zhengwei Road, Jinxi Town, Kunshan, Jiangsu Model No. : Cruiser FCC ID : 2ABB5YUNEECGSFKRX18 IC : 11554A-Cruiser EUT Voltage : DC: 26.5V Brand Name : YUNEEC Applicable Standard : FCC CFR Title 47 Part 15 Subpart C: 2012 ANSI C63.4: 2009; KDB 558074 Industry Canada RSS-Gen Issue 3/RSS-210 Issue 8 Test Result : Complied Performed Location : Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392; IC Lab Code: 4075B Documented By : Reviewed By : Approved By : Report No.: 139S058R-RF-US-P06V02 Page: 3 of 50 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site :http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : [email protected] LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : [email protected] Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., SuZhou, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : [email protected] Taiwan R.O.C. : BSMI, NCC, TAF Germany : TUV Rheinland Norway : Nemko, DNV USA : FCC Japan : VCCI China : CNAS Report No.: 139S058R-RF-US-P06V02 Page: 4 of 50 TABLE OF CONTENTS Description Page 1. General Information ...................................................................................................... 6 1.1. EUT Description ............................................................................................................ 6 1.2. Mode of Operation ........................................................................................................ 8 1.3. Tested System Details .................................................................................................. 9 1.4. Configuration of Tested System .................................................................................. 10 1.5. EUT Exercise Software ............................................................................................... 11 2. Technical Test ............................................................................................................. 12 2.1. Summary of Test Result .............................................................................................. 12 2.2. Test Environment ........................................................................................................ 13 3. Conducted Emission ................................................................................................... 14 3.1. Test Equipment ........................................................................................................... 14 3.2. Test Setup ................................................................................................................... 14 3.3. Limit ............................................................................................................................ 15 3.4. Test Procedure ............................................................................................................ 15 3.5. Uncertainty .................................................................................................................. 15 3.6. Test Result .................................................................................................................. 15 4. Radiated Emission ...................................................................................................... 16 4.1. Test Equipment ........................................................................................................... 16 4.2. Test Setup ................................................................................................................... 17 4.3. Limit ............................................................................................................................ 18 4.4. Test Procedure ................................…

Text truncated - open the document above for the full version.