2ABE2BTS22CBluetooth Speaker

1.Notice.............................................. ..................1 2.Performance characteristics.................................2 3.Operation instruction ...........................................2 4.Technical data.....................................................5 Contents 1. Notice Do not keep the voice of speaker on the maximum often, or it will hurt your hearing. We suggest you to adjust the voice to 2/3 level of the maximum, this operation can not only let you hear the perfect sound of music , but also can extend speaker's service life Avoid to storage at high temperatures such as in a hot vehicle or in direct sunlight. (Storage at high temperatures can damage performance and reduce battery life). Do not expose the speaker or any of its supplied parts to rain or other liquids. Always store the speaker with the power off and make sure it is safely protected. Please use 5V 1A charger to charge with the speaker, charging time will be about 3-4 hours If the LED indicator can not light on when turn on the speaker, please charge with the speaker 2. Performance characteristics 1.The speaker is a Double channel Bluetooth Speaker with independent output 2.The speaker adopts High fidelity design, make the sound much more natural and exquisite 3.The Bluetooth speaker has built-in Lithium battery, and can show power volume on iPhone 3. Operation instruction I. Function instruction ① Previous song/VOL-(Long press) ② Play/Pause/Answer Call(Bluetooth) / line in ③ Next song/VOL+(Long press) ④ 5V charging input port ⑤ Aux-in ⑥ Power switch III.Operation instruction Connect speaker to cell phone/ mobile phone with Bluetooth function Set your cell phone to discover the speaker by following your phone’s guide .Your phone will find the speaker (paring name of the speaker is: BTS22 and ask if you want to pair with it .Confirm this by pressing the “Yes” or “OK” key . you will hear a voice “paired”, it means your phone has been connected with the speaker. 4. Technical data Bluetooth Speaker:V4.0 Output: 3Wx2 Range: 10m Play time: 5~6H Standby time:350H Product size: 168x39x50mm Net weight: 298g IV.Pairing Your speaker uses a rechargeable battery. You must charge the battery fully before using the speaker for the first time . Turn on the speaker, led light will be on blue in 1 second ,5 seconds later, the speaker will enter pairing mode automatically. The led light will flash with red and blue. enter pairing mode . After paring ,short press“ ” to play/pause; short press “ +/ - ” to select songs; Long press “ + / - ” to adjust sound volume. Hands free function: Answering a call: short Press“ ”when you receiving an incoming call. Short press“ ” again to end the call. long press“VOL+/VOL-” to adjust sound volume Or press and hold the “ ” button for about 2 seconds to BTS22 Bluetooth Speaker User Manual 5V 1A Power adapter Connect USB port of PC, tablet or DVD player with USB cable Connect the audio output interface of PC, tablet, mobile phone, Mp3, Mp4, etc with line-in cable .Connection diagram Top Back ① ② ③ ④ ⑤ ⑥ FCC Warnings Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause h armful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and o n, the user is enc ouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Warnings: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any i nterference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with Canada radiation exposure limits set f orth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Déclaration d’IC sur l’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux radiations définies par le Canada pour des environnements non contrôlés. Cet émetteur ne doit…

Text truncated - open the document above for the full version.

FCC Confidentiality Request To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name GOLD FINGERS TECHNOLOGY CO.,LTD Addresss Room 1403, 14F, Binhai Building B, xinghua road, central of Bao’an district, Shenzhen, P, R, China City ShenZhen Country China request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: 2ABE2 BTS22C of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) x Operational Description x Block Diagrams x Schematics Diagrams Turn up produrce Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) ShenZhen, China 2014/08/27 Alex Shao Vice General Manager

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS

Bluetooth Speaker M/N: BTS22C FCC ID: 2ABE2BTS22C GOLD FINGERS TECHNOLOGY CO.,LTD

FCC RADIO TEST REPORT FCC ID: 2ABE2BTS22C IC: 12269A-BTS22C Product： Bluetooth Speaker Trade Name： N/A Model Name： BTS22C Serial Model： BTS22 Prepared for GOLD FINGERS TECHNOLOGY CO.,LTD Room 1403, 14F, Binhai Building B, xinghua road, central of Bao’an distric t Shenzhen, P, R, China Prepared by DongGuan Precise Testing Service Co.,Ltd. Room 203-204, 2F, Xinye Building, No.67 Shijing, Guanzhang Road, Dongguan, China Page 2 of 42 Report No.: PT1407288100F TEST RESULT CERTIFICATION Applicant’s name........ GOLD FINGERS TECHNOLOGY CO.,LTD Address ........................ Room 1403, 14F, Binhai Building B, xinghua road, central of Bao’an district, Shenzhen, P, R, China Manufacture's Name... GOLD FINGERS TECHNOLOGY CO.,LTD Address ........................ Room 1403, 14F, Binhai Building B, xinghua road, central of Bao’an district, Shenzhen, P, R, China Product description Product name .................Bluetooth Speaker Model and/or type reference ..................... BTS22C Serial Model .................... BTS22 Standards.................... FCC Part15.247, RSS-210 Annex 8 Test procedure ................ ANSI C63.10-2003, RSS-Gen Issue 3 This device described above has been tested by PTS, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of PTS, this document may be altered or revised by PTS, personal only, and shall be noted in the revision of the document. Date of Test...................................... Date (s) of performance of tests ....... 01, Aug. 2014 ~ 18, Aug. 2014 Date of Issue..................................... 29, Aug. 2014 Test Result......................................... Pass Testing Engineer : Assistant Technical Manager : Supervisor Authorized Signatory : Jacky Ou / Manager Page 3 of 42 Report No.: PT1407288100F Table of Contents Page 1 . SUMMARY OF TEST RESULTS 5 1.1 TEST FACILITY 6 1.2 MEASUREMENT UNCERTAINTY 6 2 . GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 DESCRIPTION OF TEST MODES 9 2.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3 . EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 3.1.2 TEST PROCEDURE 14 3.1.3 DEVIATION FROM TEST STANDARD 14 3.1.4 TEST SETUP 14 3.1.5 EUT OPERATING CONDITIONS 14 3.1.6 TEST RESULTS 15 3.2 RADIATED EMISSION MEASUREMENT 17 3.2.1 RADIATED EMISSION LIMITS 17 3.2.2 TEST PROCEDURE 18 3.2.3 DEVIATION FROM TEST STANDARD 18 3.2.4 TEST SETUP 19 3.2.5 EUT OPERATING CONDITIONS 20 3.2.6 TEST RESULTS (BETWEEN 9KHZ – 30 MHZ) 21 3.2.7 TEST RESULTS (BETWEEN 30MHZ – 1GHZ) 22 3.2.8 TEST RESULTS (ABOVE 1000 MHZ) 23 4 . POWER SPECTRAL DENSITY TEST 30 4.1 APPLIED PROCEDURES / LIMIT 30 4.1.1 TEST PROCEDURE 30 4.1.2 DEVIATION FROM STANDARD 30 4.1.3 TEST SETUP 30 4.1.4 EUT OPERATION CONDITIONS 30 4.1.5 TEST RESULTS 31 5 . BANDWIDTH TEST 32 5.1 APPLIED PROCEDURES / LIMIT 32 5.1.1 TEST PROCEDURE 32 Page 4 of 42 Report No.: PT1407288100F Table of Contents Page 5.1.2 EUT OPERATION CONDITIONS 32 5.1.3 TEST RESULTS 33 6 . PEAK OUTPUT POWER TEST 35 6.1 APPLIED PROCEDURES / LIMIT 35 6.1.1 TEST PROCEDURE 35 6.1.2 DEVIATION FROM STANDARD 35 6.1.3 TEST SETUP 35 6.1.4 EUT OPERATION CONDITIONS 35 6.1.5 TEST RESULTS 36 7 . 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE 37 7.1 DEVIATION FROM STANDARD 37 7.2 TEST SETUP 37 7.3 EUT OPERATION CONDITIONS 37 7.4 TEST RESULTS 38 8 . ANTENNA REQUIREMENT 40 8.1 STANDARD REQUIREMENT 40 8.2 EUT ANTENNA 40 9 . EUT TEST PHOTO 41 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Page 5 of 42 Report No.: PT1407288100F 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C & RSS-210 Annex 8 Standard Section Test Item Judgment Remark 15.207&7.2.4 Conducted Emission PASS 15.247 (a)(2)& A8.1 6dB Bandwidth PASS 15.247 (b)& A8.4 Peak Output Power PASS 15.247 (c) & A8.5 Radiated Spurious Emission PASS 15.247 (d) & A8.2 Power Spectral Density PASS 15.205& A8.5 Band Edge Emission PASS 15.203 Antenna Requirement PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Page 6 of 42 Report No.: PT1407288100F 1.1 TEST FACILITY NTEK Testing Technology Co., Ltd Add.:1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China. FCC Registration No.:238937; IC Registration No.:9270A-1 CNAS Registration No.:L5516 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 RF power,conducted ±0.16dB 3 Spurious emissions,conducted ±0.21dB 4 All emissions,radiated(<1G) ±4.68dB 5 All emissions,radiated(>1G) ±4.89dB 6 Temperature ±0.5°C 7 Humidity ±2% Page 7 of 42 Report No.: PT1407288100F 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Equipment Bluetooth Speaker Trade Name N/A Model Name BTS22C Serial Model BTS22 Model Difference The only difference is the model name. Product Description The EUT is a Bluetooth Speaker Operation Frequency: 2402~2480MHz Modulation Type: GFSK Bluetooth version： 4.0 Bit Rate of Transmitter 1 Mbps Number Of Channel 40CH Antenna Designation: Please see Note 3. Output Power(Conducted): -2.09dBm Antenna Gain (dBi) 0dbi Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Channel List Please refer to the Note 2. Ratings DC 3.7V from Battery or DC 5V from USB Adapter N/A Battery N/A Note: 1.1 For a more detailed features description, please refer t…

Text truncated - open the document above for the full version.

APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Radiated Emission Measurement Conducted Emission Measurement