2ABHA0123wireless charger power bank

1. 5V Input Port (Micro USB) 2. 5V Output Port (USB A-type) 4. ON/OFF Button 3. 5V Output Port (USB B-type) 5. LED indicator (Wireless) 6. LED indicator (advise of remaining charge – number of illuminated lights decreases as power supply dwindles.) 7. Wireless charging area 8.LOGO light (It will light up during charging and discharging) How to use 1. Charging the portable Power bank a. Using your mobile phone’s USB adapter. Connect a USB cable to your phone’s USB adapter. Using the micro USB connector, connect the other end of the USB cable to the IN port on the portable Power bank. Plug the USB adapter into the outlet to begin charging. b. Using your computer. Connect a USB cable to a USB outlet on your computer. Using the micro USB connector, connect the other end of the USB cable to an IN port on the portable Power bank. Make sure the computer is on to begin charging the portable Power bank. 2. Charging mobile phones and other electronic devices with USB output. a. The portable power device has a USB output port which has the maximum output current of 2100 mA. b. Connect to USB cable to your mobile phone/device using the appropriate connector. Connect the other end of the USB cable to the OUT port of the portable Power bank. Your mobile phone/device should display the status of charging. c. Remove the USB cable from your mobile device when it is fully charged. 3. Charging mobile phones and other electronic devices with wireless output. To use the wireless charging mode the mobile device needs to be a Qi-enabled device. If necessary, enable wireless charging in the settings of your mobile device. Next simply stick your device to the charging area and the wireless charging will start. Note: In order to charge device use only accessory cable (provided with power bank) or the cable included with your own device by the manufacturer. 1. Read all the instructions before using the product. 2. Power bank main unit contains an internal lithium ion battery. Upon initial use or after a prolonged storage period, fully charge it once. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles. 3. Power banks are not allowed in checked luggage on commercial airline flights. Handle with care and dispose of in accordance to local regulations. Carry-on only. 4.To reduce the risk of injury, close supervision is necessary - when the product is used near children. 5. Do not putfingers or hands into the product. 6. Do not expose power bank to rain or snow. WARNING – When using thisproduct,basicprecautions shouldalways be followed, including the following: FCC STATEMENT 7. Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of fire or injury to persons. 8. Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons. 9. Do not use the power bank that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. 10.Do not disassemble the power bank. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons. 11.Do not expose a power pack to fire or excessive temperature. Never store or use this product in temperatures below 32°F (0°C) or above 115°F (45°C). 12.Have servicing performed by a qualified repair person using only identical replacement parts.This will ensure that the safety of the product is maintained. 13.Do not charge the power bank while using the power bank to charge a device. Do not charge the power bank for more than 10 hours and do not leave unattended. 14.Disconnect the power bank when not in use. SAVE THESE INSTRUCTIONS ITE: Accessories Lithium ion battery UL 2056 certified Model: SP0381 Item No.: 7121-43 Input: DC 5V/1800mA Maximum input: DC 5V/ 2400mA Output: DC 5V/2100mA Wireless output: DC5V/ 1000mA Wireless charging distance: Max.6mm Battery/Cell capacity: 37Wh , 3.7V / 10000mAh Product capacity (USB): 28Wh , 5V / 5600mAh Product capacity (Wireless): 23Wh , 5V / 4600mAh Operating temperature: 0~45°C tor Charging 0~45°C for Discharging The product has no magnetic absorption function. Do not use it as vehicle mounted equipment. EN CAUTION: Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only. Don’t heat above 45 °C or Incinerate. Follow Manufacturer’s Instructions FR DANGER: risque d’incendie et de brûlures, ne pas ouvrir, démonter, écraser ni jeter au feu. Ne pas toucher ou tenir les surfaces accessibles sur une longue durée. MADE IN CHINA Button and Indicator Status LED Indicator Charging flash(Blue) lit(Blue) lit(Blue) lit(Green) Fully charged Charging (Wireless) lit(Red) Standby (Wireless) Working Power Off Power OnPress once Double press 4 5 1 2 3 6 78 The ‘Qi’ symbol is a trademark of the Wireless Power Consortium This device complies with Part 18 of the FCC Rules The interference potential of the device or system. Maintenance of the system. Simple measures that can be taken by the user to correct interference. For RF lighting devices, provide an advisory statement, either on the product packaging or with other user documentation, similar to the following: This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz. • • • • • for wireless charger power bank FCC Warning To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the user’s authority to operate this equipment. FCC Statement This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and…

Text truncated - open the document above for the full version.

NingboCstarImp&ExpCO.,LTD 2023.03.13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor2ABHA0123 NingboCstarImp&ExpCO.,LTDcertifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Sincerely, FosterLi NingboCstarImp&ExpCO.,LTD 2023.03.13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor2ABHA0123 NingboCstarImp&ExpCO.,LTDcertifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, FosterLi

Rev1/26/2023 NingboCstarImp&ExpCO.,LTD FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:02-28-2023 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCID:2ABHA0123 [ NingboCstarImp&ExpCO.,LTD ](“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,PROSTOCKLLCisourdesignatedU.S.agentforserviceofprocessfortheabovereferenced FCCID.[PROSTOCKLLC]acceptstomaintainanagentfornolessthanoneyearafterthegranteehas terminatedallmarketingandimportationortheconclusionofanyCommission-relatedproceeding involvingtheequipment. PROSTOCKLLC accepts,asofthedateofthefilingoftheapplication,theobligationofthedesignated U.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:PROSTOCKLLC FRN:0033411935 Address: 10PinesLakeDriveEastWayne,NJ.07470,USA ContactPerson:MarcPuglisi Tel.:973-865-8262 Email:[email protected] Sincerely, NingboCstarImp&ExpCO.,LTD PROSTOCKLLC FosterLi MarcPuglisi

NingboCstarImp&ExpCO.,LTD Declarationonmodeldifference Wetheundersignedherebyconfirmthatthesemodelsareidentical,andallmodelshavethe sameRFmoduleandantenna,PCBlayout,schematicsandcomponent.Onlydifferentonmodel number. ProductionnameTrademarkFCCModelno. wirelesschargerpower bank N/A2ABHA0123SP0381,7121-43 Confirmedby: FosterLi 2023.03.13

2023.03.13 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR ( ProductName ： wirelesschargerpowerbank ModelNumber ： SP0381,7121-43 FCCID ： 2ABHA0123 Preparedfor:NingboCstarImp&ExpCO.,LTD Address:Floor4,BuildingE,No.655-90,QimingRoad, YinzhouInvestment&InnovationCenter, Ningbo,China ) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(BlockDiagram,Schematics,Operational Description)requiredtobesubmittedwiththisapplicationbepermanentlywithheld frompublicreview. SPECIFYREASONFORREQUEST(Theabovematerialscontaintradesecrets andproprietaryinformationnotcustomarilyreleasedtothepublic.Thepublic disclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors.) Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, FosterLi

2023.03.13 NingboCstarImp&ExpCO.,LTD Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment&InnovationCenter,Ningbo, China RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeSamLvatEMTEK(DONGGUAN)CO.,LTD.toacton ourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthesigning ofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, FosterLi

Report No. EDG2302280053E006Page 1 of 4Ver.1.0 FCC ID: 2ABHA0123 Report No. EDG2302280053E006Page 2 of 4Ver.1.0 Report No. EDG2302280053E006Page 3 of 4Ver.1.0 Report No. EDG2302280053E006Page 4 of 4Ver.1.0

USB Model: SP0381 Item No.: 7121- 43 Input: DC 5V/ Max. input: DC 5V/2400mA 1800mA Output: DC 5V/2100mA Wireless output: 5V/1000mA Battery/Cell capacity: 37Wh , 3.7V / 10000mAh Product capacity (USB): 28Wh , 5V / 5600mAh Product capacity (Wireless): 23Wh , 5V / 4600mAh S/N: YY-MM-XXXX CAUTION: Risk of Fire and Burns ITE: AccessoriesLithium ion Battery UL 2056 certified MADE IN CHINA Wireless charger power bank 18.4mm 56mm FCC ID: 2ABHA0123 IC: 25712-00002 HVIN: 001

USB Model: 7121-43 Input: DC 5V/ Max. input: DC 5V/2400mA 1800mA Output: DC 5V/2100mA Wireless output: 5V/1000mA Battery/Cell capacity: 37Wh , 3.7V / 10000mAh Product capacity (USB): 28Wh , 5V / 5600mAh Product capacity (Wireless): 23Wh , 5V / 4600mAh S/N: YY-MM-XXXX CAUTION: Risk of Fire and Burns ITE: AccessoriesLithium ion Battery UL 2056 certified MADE IN CHINA Wireless charger power bank 18.4mm 56mm FCC ID: 2ABHA0123 IC: 25712-00002 HVIN: 001

USB Model: SP0381 Input: DC 5V/ Max. input: DC 5V/2400mA 1800mA Output: DC 5V/2100mA Wireless output: 5V/1000mA Battery/Cell capacity: 37Wh , 3.7V / 10000mAh Product capacity (USB): 28Wh , 5V / 5600mAh Product capacity (Wireless): 23Wh , 5V / 4600mAh S/N: YY-MM-XXXX CAUTION: Risk of Fire and Burns ITE: AccessoriesLithium ion Battery UL 2056 certified MADE IN CHINA Wireless charger power bank 18.4mm 56mm FCC ID: 2ABHA0123 IC: 25712-00002 HVIN: 001

Report No. EDG2302280053E006Page 1 of 4Ver.1.0 FCC ID: 2ABHA0123 Report No. EDG2302280053E006Page 2 of 4Ver.1.0 Report No. EDG2302280053E006Page 3 of 4Ver.1.0 ANT Report No. EDG2302280053E006Page 4 of 4Ver.1.0

ReportNo.EDG2302280053E00602RPage 1 of 18 Ver.1.0 AccesstotheWorld TESTREPORT ProductName ： wirelesschargerpowerbank ModelNumber ： SP0381,7121-43 FCCID ： 2ABHA0123 Preparedfor:NingboCstarImp&ExpCO.,LTD Address:Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment &InnovationCenter,Ningbo,China Preparedby:EMTEK(DONGGUAN)CO.,LTD. Address:-1&2/F.,Building2,ZoneA,ZhongdaMarineBiotechnology ResearchandDevelopmentBase,No.9,XinchengAvenue, SongshanhuHigh-technologyIndustrialDevelopmentZone, Dongguan,Guangdong,China TEL:+86-0769-22807078 FAX:+86-0769-22807079 ReportNumber:EDG2302280053E00602R Date(s)ofTests:February28,2023toMarch10,2023 Dateofissue:March10,2023 $二维码$ ReportNo.EDG2302280053E00602RPage 2 of 18 Ver.1.0 AccesstotheWorld TABLEOFCONTENT TestReportDescriptionPage 1.EUTSpecification...........................................................................................................................5 2.SUMMARYOFTESTRESULT.....................................................................................................6 3.DescriptionofTestFacility..........................................................................................................7 4.MEASURINGDEVICEANDTESTEQUIPMENT......................................................................8 4.1.FORMPEMEASUREMENT..........................................................................................................................................8 5.RFEXPOSURE................................................................................................................................9 5.1.MEASURINGSTANDARD...............................................................................................................................................9 5.2.REQUIMENTS................................................................................................................................................................9 5.3.TESTCONFIGURATION................................................................................................................................................10 5.4.BLOCKDIAGRAMOFEUTSYSTEM............................................................................................................................11 5.5.LIMITS.........................................................................................................................................................................12 5.6.MEASURINGRESULTS................................................................................................................................................13 6.PHOTOGRAPHSOFTESTSETUP...........................................................................................18 ReportNo.EDG2302280053E00602RPage 3 of 18 Ver.1.0 AccesstotheWorld TESTREPORTDESCRIPTION Applicant:NingboCstarImp&ExpCO.,LTD Address: Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment &InnovationCenter,Ningbo,China Manufacturer:NingboCstarImp&ExpCO.,LTD Address: Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment &InnovationCenter,Ningbo,China EUT:wirelesschargerpowerbank ModelName:SP0381,7121-43 Trademark:N/A MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTESTRESULT FCCPart1(1.1310)andPart2(2.1091) 680106D01RFExposureWirelessChargingAppv03 PASS TheaboveequipmentwastestedbyDONGGUANEMTEKCO.,LTD.Thetestdata,dataevaluation, testprocedures,andequipmentconfigurationsshowninthisreportweremadeinaccordancewiththe proceduresgiveninFCCPart1(1.1310)andPart2(2.1091) 680106D01RFExposureWirelessChargingAppv03bythesampleEUTtestedasdescribedinthis reportisincompliancewithofFCCRules Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedinthisreport. DateofTest:February28,2023toMarch10,2023 Preparedby: XiaYang/Editor Reviewer: TimDong/Supervisor Approved&AuthorizedSigner: SamLv/Manager ReportNo.EDG2302280053E00602RPage 4 of 18 Ver.1.0 AccesstotheWorld ModifiedInformation VersionReportNo.RevisionDataSummary EDG2302280053E00602R / OriginalVersion ReportNo.EDG2302280053E00602RPage 5 of 18 Ver.1.0 AccesstotheWorld 1.EUTSPECIFICATION CharacteristicsDescription EUTwirelesschargerpowerbank Modelnumber SP0381,7121-43 Allproductsarethesame,onlythemodelnumberaredifferent HereweselectedSP0381forallthetest Samplenumber2# PowerSupplyDC5V/1.8-2.4AfromUSB Output DC5V/2.1A Wireless5V/1A OperatingFrequencyRange111KHz-205KHz TheMAXleakage(Electric)2.85v/m TheMAXleakage(Magnetic)0.0257a/m ModulationTechniqueInduction AntennaTypeInductionCoilantenna DevicecategoryPortable(<20cmseparation) Mobile(>20cmseparation) Others___ ExposureclassificationOccupational/Controlledexposure(S=5mW/cm2) GeneralPopulation/Uncontrolledexposure(S=1mW/cm2) AntennadiversitySingleantenna Multipleantennas Txdiversity Rxdiversity Tx/Rxdiversity EvaluationappliedMPEEvaluation SAREvaluation Note:TheWPTdeviceisonlycapableofwirelesspowertransferbetweenonesourceandoneclient atatime. ReportNo.EDG2302280053E00602RPage 6 of 18 Ver.1.0 AccesstotheWorld 2.SUMMARYOFTESTRESULT EMISSION DescriptionofTestItemStandard&LimitsResults MPE FCCPart1(1.1310)andPart2(2.1091) KDB680106D01RFExposureWireless ChargingAppv03 Pass Note:N/AisanabbreviationforNotApplicable. ReportNo.EDG2302280053E00602RPage 7 of 18 Ver.1.0 AccesstotheWorld 3.DESCRIPTIONOFTESTFACILITY SiteDescription EMCLab.:AccreditedbyCNAS,2020.08.27 Thecertificateisvaliduntil2024.07.05 TheLaboratoryhasbeenassessedandprovedtobeincompliancewith CNAS/CL01:2018 TheCertificateRegistrationNumberisL3150 AccreditedbyFCC DesignationNumber:CN1300 TestFirmRegistrationNumber:945551 AccreditedbyA2LA,April05,2021 TheCertificateRegistrationNumberis4321.02 AccreditedbyIndustryCanada TheCertificateRegistrationNumberisCN0113 NameofFirm:EMTEK(DONGGUAN)CO.,LTD. SiteLocation:-1&2/F.,Buiding2,ZoneA,ZhongdaMarineBiotechnologyResearchand DevelopmentBase,N.9,XinchengAvenue,SongshanhuHigh-technology IndustrialDevelopmentZone,Dongguan,Guangdong,China ReportNo.EDG2302280053E00602RPage 8 of 18 Ver.1.0 AccesstotheWorld 4.MEASURINGDEVICEANDTESTEQUIPM…

Text truncated - open the document above for the full version.

CUSTOMER: CUSTOMER P/N: DATE: 2021/8/25 HRSW MODLE ：G50开槽+胶 20长 REV.NO.:A0 PLEASE RETURN TO US COPY OF "SPECIFICATION FOR APPROVAL "WITH YOUR APPROVED APPROVED CUSTOMER’S SIGNATURE REVDATEDRAWNCHECKEDAPPROVED A0 2021/8/25何伟华谢超韦立红 ADD：深圳市龙华新区观澜镇环观中路48号B栋2楼 ADD： 2nd Floor, Building B, 48 Huanguan Middle Road, Guanlan Town, Longhua New District, Shenzhen City SPECIFICATION FOR APPROVAL TITLE: REJECTED “ ” CHANGED CONTENTENTS &CHANGED REASONS NEW RELEASE 鸿 日 升 威 科 技 有 限 公 司 HRSW ELECTRONICS CO.,LTD TEL：15112254520 FAX：+86-0755-28015170 ROHS 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: ABC D1D2EFGHI 50±0.520.5±0.530±0.242±0.240±0.23-4MM 50±0.22.3±0.5 5±0.5 3.WINDING： 1.1底部印字100 ST EP TAPE REMAR K N1 4.ELECTRICAL SPECIFICATION: ITEM SPEC 5.BILF OF MATERIAL： NO.SGS NO. 1 2 3 4 5 SPECIFICATION FOR APPROVAL START-FINISHWIRE TYPETURNS S-F⌀0.08*105mm 2UEW10TS (Ref) LDCRIDCQ值HI-POT S-F S-F 100KHz,0.25V AT 25°C 6.5uH±10% 60mΩ Max ITEMMATERIAL SPECIFICATIONMANUFACTURER COREG45LNANJINGJINNINGCO,LTD 9999CUDAK CO.,LTD COREL33H PRQ3/2.5/0.9NANJINGJINNINGCO,LTD WIRE⌀0.08mm*105 2UEWTAIYI CO.,LTD 何伟华谢超韦立红 TES T CON HRSW ELECTRONICS CO.,LTD PART NO TITLE G50开槽 DRAWN BYCHECKED BY APPROVED BY TUBE10mmLIANCHENG CO.,LTD EPOXY

ReportNo.EDG2302280053E00601RPage 1 of 22 Ver.1.0 TESTREPORT ProductName ： wirelesschargerpowerbank ModelNumber ： SP0381,7121-43 FCCID ： 2ABHA0123 Preparedfor:NingboCstarImp&ExpCO.,LTD Address:Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment &InnovationCenter,Ningbo,China Preparedby:EMTEK(DONGGUAN)CO.,LTD. Address:-1&2/F.,Building2,ZoneA,ZhongdaMarineBiotechnology ResearchandDevelopmentBase,No.9,XinchengAvenue, SongshanhuHigh-technologyIndustrialDevelopmentZone, Dongguan,Guangdong,China TEL:+86-0769-22807078 FAX:+86-0769-22807079 ReportNumber:EDG2302280053E00601R Date(s)ofTests:February28,2023toMarch10,2023 Dateofissue:March10,2023 $二维码$ ReportNo.EDG2302280053E00601RPage 2 of 22 Ver.1.0 TABLEOFCONTENT TestReportDescriptionPage 1.SUMMARYOFTESTRESULTS..........................................................................................................................5 2.GENERALINFORMATION..................................................................................................................................6 2.1.DescriptionofDevice(EUT)...........................................................................................................................6 2.2.Input/OutputPorts........................................................................................................................................6 2.3.IndependentOperationModes......................................................................................................................7 2.4.TestManner....................................................................................................................................................7 2.5.DescriptionofTestFacility.............................................................................................................................7 2.6.TestSoftware..................................................................................................................................................7 2.7.DescriptionofSupportDevice.......................................................................................................................8 2.8.MeasurementUncertainty..............................................................................................................................8 3.MEASURINGDEVICEANDTESTEQUIPMENT................................................................................................9 3.1.ConductedEmissionTestEquipment............................................................................................................9 3.2.For3mRadiatedEmissionMeasurement9K-30M(3mchamber1#)...........................................................9 3.3.For3mRadiatedEmissionMeasurement30M-1G(3mchamber1#)........................................................9 4.20DBBANDWIDTH............................................................................................................................................10 4.1.TestProcedure.............................................................................................................................................10 4.2.TestResults..................................................................................................................................................10 5.POWERLINECONDUCTEDEMISSIONMEASUREMENT.............................................................................11 5.1.BlockDiagramofTestSetup........................................................................................................................11 5.2.Limits............................................................................................................................................................11 5.3.TestProcedure.............................................................................................................................................11 5.4.MeasuringResults.......................................................................................................................................12 6.RADIATEDEMISSIONTEST.............................................................................................................................15 6.1.MeasurementProcedure..............................................................................................................................15 6.2.TestSET-UP(BlockDiagramofConfiguration)...........................................................................................15 6.3.MeasurementEquipmentUsed...................................................................................................................16 6.4.RadiatedEmissionLimit...............................................................................................................................16 6.5.MeasurementResult....................................................................................................................................18 7.ANTENNAREQUIREMENT...............................................................................................................................21 ReportNo.EDG2302280053E00601RPage 3 of 22 Ver.1.0 TESTREPORTDESCRIPTION Applicant:NingboCstarImp&ExpCO.,LTD Address: Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment &InnovationCenter,Ningbo,China Manufacturer:NingboCstarImp&ExpCO.,LTD Address: Floor4,BuildingE,No.655-90,QimingRoad,YinzhouInvestment &InnovationCenter,Ningbo,China EUT:wirelesschargerpowerbank ModelName:SP0381,7121-43 Trademark:N/A MeasurementProcedureUsed: APPLICABLESTANDARDS STANDARDTESTRESULT FCC47CFRPart2,SubpartJ FCC47CFRPart15,SubpartC PASS TheaboveequipmentwastestedbyDONGGUANEMTEKCO.,LTD.Thetestdata,dataevaluation,test procedures,andequipmentconfigurationsshowninthisreportweremadeinaccordancewiththe proceduresgiveninANSIC63.10(2013)andtheenergyemittedbythesampleEUTtestedasdescribed inthisreportisincompliancewithconductedandradiatedemissionlimitsofFCCRulesPart15C Thetestresultsofthisreportrelateonlytothetestedsampleidentifiedi…

Text truncated - open the document above for the full version.

Report No. EDG2302280053E006Page 1 of 3Ver.1.0 FCC ID: 2ABHA0123 Report No. EDG2302280053E006Page 2 of 3Ver.1.0 Report No. EDG2302280053E006Page 3 of 3Ver.1.0