2ABLB-ITV-R01TTHE PRODUCT IS RF 2.4GHz WIRELESS REMOTE

Smart Touch Solution ITV R01 USER’S Manual ITV - R01 USER’S Manual S p ecification Touch Air Remote Model name ITV-R01T Interface RF 2.4GHz p Interface(receiver) USB2.0 Dimension 136mm(L) X 45.4mm(H) X 24.2mm(W) Weight 46g (71g with battery) Temperature -10 ~ 50 Batter y DC1.5V Type AAA * 2ea Distance 20m Power consumption 6mA (MAX) Voltage 1.9V ~ 3.6V OS Windows XP,VISTA,8 / Androids S p ecification Touch Air Receiver Model name ITV-R01R Interface RF 2.4GHz(2.402~2.478GHz) p Interface(receiver) Full Speed USB2.0 compliant Dimension 18mm(L) X 6mm(H) X 13mm(W) Weight 1g Temperature -10 ~ 50 Modulation GFSK RF Channels 39 within the 2.4GHz ISM band USB D l U External Crystal 16MHz Voltage 4.5V ~ 5.5V (USB) USB D ong l e U sage 1. Plug in the USB port and wait 30 sec when installs at first time. OS Windows XP,VISTA,8 / Androids 2. Replug in the USB Po rt If fails installing. Warning y THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION Warning IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE , AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED , INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. y NOTE: THE GRANTEE IS NOT RE SPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE SUCH MODIFICA TIONS COULD VOID THE USER ’ S AUTHORITY TO COMPLIANCE . SUCH MODIFICATIONS COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT. View & Features Touch Air Remote ■ More accurate pointing than gyro products. ■ Less tiredness when doing the mouse pointing. View & Features ■ Power consumption : Lower than any other RF remotes , around 6mA(max ) against normal RF remote’s 12mA including ordinary touchpad Gyro remote trackballs etc touchpad , Gyro remote , trackballs , etc . Î Long last with the power of battery (max 1 year) ■ Design : ■ Design : Ergonomic design with nice grip by hand. More cute & pretty than Toy products. ■ Size : ■ Size : Small , portable size enables to control easily your PC, TV with one hand. ■ Can use at pc STB TV with various OS (windows pc apple pc ■ Can use at pc , STB , TV with various OS (windows pc , apple pc , Android pc) to control easily by accurate mouse pointing. Quick Reference Guide Touch Air Remote Virtual keyboard (at Windows) Home [User Manual] 1. Insert batteries (AAA *2ea)2. Put the USB receiver into the USB port of your Computer (TV, system) Touch pad: Fn key : Multimedia keys “ON” Esc [sleep mode] 3. Smart sleep mode" for saving power after 5 minutes without touching it. Î wake u p b y p ushin g mouse click buttons or , Touch pad:-mouse pointing- tap (click)Scroll wheel Mouse click buttons : Left & Right button pyp g , cursor buttons 4. Fn on : media buttons ON(Play & Pause / REW & FF / Vol up & down / Mute) Î Push the Fn key again to resume the : Left & Right button Cursor Buttons : up/down/left/right Media buttons Î Push the Fn key again to resume the mouse pointing with click buttons. Î Touch the touchpad 2times also enables the Fn Key off automatically.(media buttons off) Media buttons(by Fn “ON”) :-Play & Pause- Vol up & down - reward & forward [Pairing] 5. Basically this Smart Remote is already connected (pairing done) with USB dongle. But when pairing is disconnected by accident or -mute by any activity unintended : Î Please Keep pushing the “Esc” button for 3 seconds to pair with the USB receiver. Î kee p the distance with the USB receiver p close around 30 cm while doing this pairing Touch Air Remote [Warning]To avoid the risk of inju ry, damage to the Remocon, ● avoid long periods of repetiti ve motions or incorrect body position, poor work habits which can be associated with physical discomfort and injury to nerves, tendons, muscles. : If you feel pain, numbness, weakness, swelling, burning, cramping, stiffness in your hands , wrists , arms , shoulders , neck , back , p lease consult a q ualified health p rofessional. ,,, ,,,p q p ● Be careful to keep children away from this Remocon : Small parts of this Remocon can form a choking hazard for children(especially under 3years old). ● Do not immerse this Remocon in water or other liquid. ● Do not use this Remocon if it has sustained any kind of damage. ● Do not heat, open, puncture, mutilate , or dispose the Batteries in fire. ● Do not mix new and old batteries(this may ca use batteries to run out of power quickly) ● Do not mix new and old batteries(this may ca use batteries to run out of power quickly) or different types of batteries (ex: carbon-zinc with alkaline or rechar geable with disposal). ● Do Not Attempt to : take apart, open, service, or modify this device. Doing so could present the risk of el ectric shock or other hazard. Any evidence of any attempt to open and/or modify the device, in cluding any peeling, puncturing will void the Limited Warranty. ● T his RF device(frequency around 2.4Ghz ) can be causing interference to othe r radio-communications devices such as Radio, TV, Wireless LAN, Cordless phones, etc. : Relocate the antenna of the other devices, or move this device farther away from them. : To avoid Wireless LAN's speed issues, se t your LAN's channel around "11"~"13". [Packages]Remote Controller, USB receiver , Manual [System Requirement]● Windo s XP o Highe // Mac OS 10 0 X o Highe s ppo t USB po t ● Windo w s XP o r Highe r // Mac OS 10 . 0 X o r Highe r s u ppo r t USB po r t . ● USB 2.0 or Higher version. Touch Air Remote [Regulatory Information]This device is complied with CE, FCC, KCC Standards. This device is for only home or office use. Not intended for use in machinery, medical, industrial applications. This Class B digital apparatus complies with Part 15 of the U.S. Federal Communications Commission (FCC) rules, Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions : (1) this device may not cause interference, and (2) this device must accept any interference received, including interference th at may cause undesired ope…

Text truncated - open the document above for the full version.

ITV-R01 Block Diagram & Circuit Explanation - ITVR01 TX Remocon Block Diagram Touch Air (ITV-R01) Remote Controller has configured Touch PAD Module, Key Function and nRF24LE1 The nRF24LE1 uses the same 2.4 GHz GFSK RF transceiver with embedded protocol engine (Enhanced ShockBurst™) that is found in the nRF24L01+ single chip RF transceiver. The RF transceiver is designed for operation in the world wide ISM frequency band at 2.402 - 2.478 GHz and is very well suited for ultra low power wireless applications. Touch-PAD Module KEY Matrix Battery Power Source Transmitter BLOCK Diagram nRF24LE1 RF ANT The RF transceiver module is configured and operated through the RF transceiver map. This register map is accessed by the MCU through a dedicated on-chip Serial Peripheral interface (SPI) and is available in all power modes of the RF transceiver module. The embedded protocol engine (Enhanced ShockBurst™) enables data packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Data FIFOs in the RF transceiver module ensure a smooth data flow between the RF transceiver module and the nRF24LE1 MCU. The rest of this chapter is written in the context of the RF transceiver module as the core and the rest of the nRF24LE1 as external circuitry to this module. Touch PAD Module operates 3 step like this and communicate I2C with nRF24LE1 Main CPU ▶ ACTIVE mode Touch module stay in ACTIVE mode when it detected touch. If Touch module detect touch then data transfer to RCU. ▶IDLE mode Touch module operation translate to idle mode when it detected no touch over 5s. If Touch module detect touch then translate to Active mode immediately. ▶ SLEEP mode Touch module operation translate to sleep mode when it detected CS_IN high. If Touch module detect CS_IN low then translate to Active mode immediately. The DATA which created by Touch PAD Module is transferred by nRF24LE1 and It is received by the USB Dongle. The Key Function Button has a Android OS version and Window OS version Mac OS Keyboard Function.. - Dongle RX Block Diagram The nRF24LU1+ is a unique single chip solution enabling ultra compact USB dongles for wireless peripherals. The USB Dongle supports Full speed 2.0 compliant device controller The nRF24LU1+ uses the same 2.4GHz GFSK RF transceiver with embedded protocol engine (Enhanced ShockBurst™) that is found in the nRF24L01+ single chip RF Transceiver and the nRF24LE1 on-chip solution. The RF Transceiver is designed for operation in the world wide ISM frequency band at 2.402 - 2.478GHz and is very well suited for ultra low power wireless applications. The RF Transceiver module is configured and operated through the RF transceiver map. This register map is accessed by the MCU through a dedicated on-chip Serial Peripheral interface (SPI) and is available in all power modes of the RF Transceiver module. Receiver RF ANT The embedded protocol engine (Enhanced ShockBurst™) enables data packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Data FIFOs in the RF Transceiver module ensure a smooth data flow between the RF Transceiver module and the nRF24LU1+ MCU. Equipment Identification Code FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.

KTI13EF11006 FCC ID : 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 1 of 2 External photo (Front) KTI13EF11006 FCC ID : 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 2 of 2 External photo (Rear)

KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 1 of 1 Label location FCC ID Label Location

KTI13EF11006 FCC ID : 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 1 of 1 FCC ID Sample Label

KTI13EF11006 FCC ID : 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 1 of 2 Internal photo – Main Board KTI13EF11006 FCC ID : 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 2 of 2 Internal photo –Touch Pad

Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09 Schematic (회로도) Main Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09 Schematic (회로도) Touch PAD

KTI13EF11006 FCC ID : SOD2ABLB-ITV-RO1T Korea Technology Institute Co., Ltd. Page 1 of 1 Antenna Requirement PCB Pattern Antenna

ITV-R01 Block Diagram & Circuit Explanation - ITVR01 TX Remocon Block Diagram Touch Air (ITV-R01) Remote Controller has configured Touch PAD Module, Key Function and nRF24LE1 The nRF24LE1 uses the same 2.4 GHz GFSK RF transceiver with embedded protocol engine (Enhanced ShockBurst™) that is found in the nRF24L01+ single chip RF transceiver. The RF transceiver is designed for operation in the world wide ISM frequency band at 2.402 - 2.478 GHz and is very well suited for ultra low power wireless applications. The RF transceiver module is configured and operated through the RF transceiver map. This register map is accessed by the MCU through a dedicated on-chip Serial Peripheral interface (SPI) and is available in all power modes of the RF transceiver module. The embedded protocol engine (Enhanced ShockBurst™) enables data packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Data FIFOs in the RF transceiver module ensure a smooth data flow between the RF transceiver module and the nRF24LE1 MCU. The rest of this chapter is written in the context of the RF transceiver module as the core and the rest of the nRF24LE1 as external circuitry to this module. Touch PAD Module operates 3 step like this and communicate I2C with nRF24LE1 Main CPU ▶ ACTIVE mode Touch module stay in ACTIVE mode when it detected touch. If Touch module detect touch then data transfer to RCU. ▶IDLE mode Touch module operation translate to idle mode when it detected no touch over 5s. If Touch module detect touch then translate to Active mode immediately. ▶ SLEEP mode Touch module operation translate to sleep mode when it detected CS_IN high. If Touch module detect CS_IN low then translate to Active mode immediately. The DATA which created by Touch PAD Module is transferred by nRF24LE1 and It is received by the USB Dongle. The Key Function Button has a Android OS version and Window OS version Mac OS Keyboard Function.. - Dongle RX Block Diagram The nRF24LU1+ is a unique single chip solution enabling ultra compact USB dongles for wireless peripherals. The USB Dongle supports Full speed 2.0 compliant device controller The nRF24LU1+ uses the same 2.4GHz GFSK RF transceiver with embedded protocol engine (Enhanced ShockBurst™) that is found in the nRF24L01+ single chip RF Transceiver and the nRF24LE1 on-chip solution. The RF Transceiver is designed for operation in the world wide ISM frequency band at 2.402 - 2.478GHz and is very well suited for ultra low power wireless applications. The RF Transceiver module is configured and operated through the RF transceiver map. This register map is accessed by the MCU through a dedicated on-chip Serial Peripheral interface (SPI) and is available in all power modes of the RF Transceiver module. The embedded protocol engine (Enhanced ShockBurst™) enables data packet communication and supports various modes from manual operation to advanced autonomous protocol operation. Data FIFOs in the RF Transceiver module ensure a smooth data flow between the RF Transceiver module and the nRF24LU1+ MCU. Equipment Identification Code FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. - Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDERSIRED OPERATION.

Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09

Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09 PCB LAYOUT 1. TOP PATTERN 2. Top Solder Mask 3. DRILL DATA Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09 4. TOPSILK 5. TOP REF_NUMBER and Value Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09 6. Bottom Pattern 7. Bottom Solder Mask 8. Bottom Silk Nordic 2.4GHz TX REMOCON 생산자료 ITVERS_Version 01 2013/07/09 9. Bottom REF_NUMBER and Value

KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 1 of 29 Te s t R e p o r t Test Report No.: KTI13EF11006 Registration No.: KR0023 Applicant: ITVERS Corporation Applicant Address: 1224, Lifecombi Bldg, 61-4 Yeouido-dong, Yeongdeungpo-gu, Seoul, Korea 150-732 Product: RF 2.4GHz Wireless Remote FCC ID: 2ABLB-ITV-R01T Model No. ITV-R01T Receipt No.: 13-11006 Date of receipt: November 18, 2013 Date of Issue: November 22, 2013 Testing location Korea Technology Institute Co., Ltd. 51-19, Sanglim3-Ri, Docheok-Myeon, Gwangju-Shi, Gyeonggi-Do, Korea Test Standards: FCC/ANSI. C63.4: 2003 Rule Parts: FCC Part 15.247 Subpart C, ANSI C 63.4-2003 Method of Measurement FCC Public Notice DA 00-705 Test Result: The above-mentioned product has been tested with compliance. Tested by: M. G. Ji / Engineer Approved by: S. H. Song /Technical Manager Signature Date November 22, 2013 Signature Date November 22, 2013 Other Aspects: Abbreviations: * OK, Pass=passed * Fail=failed * N/A=not applicable ☞ - This test report is not permitted to copy partly without our permission. - This test result is dependent on only equipment to be used. - This test result is based on a single evaluation of one sample of the above mentioned. - This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S Government. - We certify this test report has been based on the measurement standards that is traceable to the national or international standards. KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 2 of 29 ≫≫ Contents ≪≪ 1. Verification of compliance 3 2. General Information 4 2.1 Product Description 4 3. EUT MODIFICATION 4 4. Information about the FHSS characteristics 4 5. Test Summary 6 5.1 Test Items and results 6 5.2 Additions, deviations, exclusions from standard 6 5.3 Related Submittal(s) / Grant(s) 6 5.4 Purpose of the test 6 5.5 Test Methodology 6 5.6 Test Facility 6 6. System Test Configuration 7 6.1 Characteristics of equipment 7 6.2 Used Peripherals list 7 6.3 Mode of operation during the test 7 6.4 Uncertainty 7 6.5 Test setup of EUT 8 7. Measurement results 9 7.1 Carrier Frequency Separation 9 7.2 Number of Hopping Frequencies 11 7.3 20dB Bandwidth 14 7.4 Time of Occupancy(Dwell Time) 18 7.5 Peak Output Power 20 7.6 Band-edge (at 20 dB below) 24 7.7 Test data for radiated emission 27 7.8 AC Conducted Emission 32 7.9 Antenna Requirement 34 KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 3 of 29 1. Verification of compliance Applicant : ITVERS Corporation Address : 1224, Lifecombi Bldg, 61-4 Yeouido-dong, Yeongdeungpo-gu, Seoul, Korea 150-732 FCC ID : 2ABLB-ITV-RO1T Model Name : ITV-R01T Brand Name : Serial Number : N/A Date : November 21, 2013 Equipment Class DSS – PART 15 SPREAD SPETRUM TRANSMITTER Kind of Equipment RF 2.4GHz Wireless Remote Measurement Procedures FCC Public Notice DA 00-705, ANSI C63.4-2003, Type of Equipment Tested Pre-Production Kind of Equipment Authorization Requested Certification Equipment Will Be Operated Under FCC Rules Part(s) FCC PART 15 SUBPART C Section 15.247 Modifications On The Equipment To Achieve Compliance None Final Test was Conducted On 10m Open area test site - The above equipment was tested by Korea Technology Institute Co., Ltd. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanation from equipment are within the compliance requirements. KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 4 of 29 2. General Information 2.1 Product Description The ITVERS Corporation Model ITV-R01T (referred to as the EUT in this report) is used to remote controller which has a function of nRF24XX. The product specification described herein was obtained from product data sheet or user’s manual. Equipment Name RF 2.4GHz Wireless Remote Operating Frequency 2402 MHz ~ 2478 MHz RF Output Power -1.33 dBm Number of Channel 39 Channels Mode of Operation Duplex Modulation Type GFSK Antenna Type / Gain PCB Pattern Antenna /1.70dBi(Max) List of Each OSC. Or Crystal. Freq. 16 MHz Crystal Oscillator Rated Supply Voltage DC 3.0 V 3. EUT MODIFICATION - NONE. 4. Information about the FHSS characteristics 4.1 Pseudorandom frequency hopping sequence Nordic has developed Gazell, an RF protocol designed for efficiency, low power consumption and minimum latency. Gazell incorporates frequency agility technology; this employs a simplified frequency hopping scheme where the transmitting and receiving pair establish communication on a particular frequency and then only hop to a different frequency should interference be experienced. The channel on which the interference was experienced is marked and not reused during that particular communication cycle ÎFrequency hopping in Gazell In Gazell, the frequency hopping as seen on the air is completely determined by the Devices. The Host will for any frequency hopping policy on a Device still listen on all channels in turn, rotating through the complete channel table. The Host is configured in the same way for all Device modes, and does not even know a Device's synchronization mode or hopping policy. A Device can select which channels to use and how often to use them. Different Devices can choose different channel hopping policies if wanted. The available channel selection policies are different for the asynchronous and semi-synchronous modes: Channel selection policies in asynchronous mode A Gazell Device in asynchronous mode can be set up with two channel selection policies: -Frequency agility (FA) -Frequency hopping spread spectrum (FHSS) For the "frequency agility" policy, we first try the previous successful channel, assuming that this channel is still good. This is the channel that was used by the last acknowledged packet. We will stay on this channel as long as it is good. In a qu…

Text truncated - open the document above for the full version.

KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 1 of 3 6. Photograph of the Test Set-Up Photograph 1 : Setup for radiated Emissions (below 30 MHz) KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 2 of 3 Photograph 2 : Setup for radiated Emissions (above 30 MHz) KTI13EF11006 FCC ID: 2ABLB-ITV-R01T Korea Technology Institute Co., Ltd. Page 3 of 3 Photograph 3 : Setup for radiated Emissions (above 1 GHz)