2ABOFAA2-235Absolute Air 2

AbsoluteAir ™ 2 Manual May 2015 Revision X ©2015 Tarana Wireless, Inc. All rights reserved 2953 Bunker Hill Lane, Suite 100 Santa Clara, CA 95054 USA www.taranawireless.com [email protected] Tarana Wireless AbsoluteAir User Guide This user guide incorporates features and functions provided with Tarana's AbsoluteAir 2 products. Rocket science inside. Unrivaled performance outside. Tarana Wireless — AbsoluteAir 2 Manual Page 2 of 61 Copyright © 2015 by Tarana Wireless All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Tarana Wireless. To request permission, contact [email protected]. Warranty Tarana Wireless makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties or merchantability or fitness for any particular purpose. Further, Tarana Wireless reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Tarana Wireless to notify any pers on of such revision or changes. Trademarks All trademarks are the property of their respective owners. Contact Information Sales and Sales Support: Contact Tarana Wireless headquarters, or find your regional sales office at http://www.taranawireless.com/contact. Tarana Wireless 2953 Bunker Hill Lane, Suite 100 Santa Clara, CA 95054 USA +1. 408.351.4085 Tarana Wireless — AbsoluteAir 2 Manual Page 3 of 61 Table of Contents About This Document ....................................................................................................................................... 5 1 Warnings, Regulatory Information, and Safety Information ................................................................... 6 1.1 General Warnings ............................................................................................................................ 6 1.2 FCC Information ............................................................................................................................... 6 1.3 Health and Safety Warning .............................................................................................................. 7 1.4 Warning Labels ............................................................................................................................... 10 2 Package Contents ................................................................................................................................... 12 3 Product Overview ................................................................................................................................... 13 3.1 Deployment Configuration ............................................................................................................ 13 3.2 Non -­‐Line -­‐of-­‐Sight , Point-­‐to-­‐Multipoint Backhaul .......................................................................... 14 3.3 Frequency Bands and Frequency Reuse ........................................................................................ 14 3.4 Key Applications ............................................................................................................................. 14 4 Deployment Overview ........................................................................................................................... 15 4.1 Electrical Power .............................................................................................................................. 15 4.2 Power and Data Options ................................................................................................................ 17 5 Pre-­‐ Provisioning ..................................................................................................................................... 19 5.1 Required Information for Pre-­‐Provisioning ................................................................................... 19 5.2 Pre-­‐ Provision Using the Command Line Interface ........................................................................ 20 6 Quick Install ............................................................................................................................................ 22 6.1 Verify That Tools are Available ...................................................................................................... 22 6.2 Check Package Contents ................................................................................................................ 23 6.3 Mount the Unit .............................................................................................................................. 23 6.4 Connect Data Cables and Power Up .............................................................................................. 27 6.5 Link Alignment ................................................................................................................................ 29 7 CLI and Management Basics .................................................................................................................. 31 8 Radio Link Management ........................................................................................................................ 32 8.1 Logging in to the CLI ....................................................................................................................... 32 8.2 Commands for Configuration ........................................................................................................ 33 8.3 Commands for Monitoring ............................................................................................................ 42 8.4 Upgrading the System Software ............................................................…

Text truncated - open the document above for the full version.

1 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 May 31st, 2015 Request for Confidentiality Company Name: Tarana Wireless FCC ID: 2ABOFAA2-235 Re: AbsoluteAir2 Family Gentlemen, In accordance with 0.457 and 0.459 of CFR 47, and KDB 726920, Tarana Wireless, Inc. hereby requests permanent confidentiality of the following document for the subject application.  Internal Photos The document above contain detailed system and equipment information about the product which Tarana Wireless considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since our product will not be marketed and will not be accessible to the general public, Tarana Wireless considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. In addition our products are installed by professional installers and at areas not accessible to the public. NDA will be in place for each purchase/ deployment with the owner of the equipment and license holder, and the technical staff responsible for initial installation and maintenance. Sincerely, _____________________________ Signature Ivaylo Tankov Sr. Compliance Manager Tarana Wireless, Inc. 2953 Bunker Hill Line Santa Clara CA 95054 Email [email protected]; Ph: 408 351 4085

1 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 May 31st, 2015 Request for Confidentiality Company Name: Tarana Wireless FCC ID: 2ABOFAA2-235 Re: AbsoluteAir2 Family Gentlemen, In accordance with 0.457 and 0.459 of CFR 47, Tarana Wireless, Inc. hereby requests Sort term confidentiality of 180 days for the following documents for the subject application.  External Photos  User Manual These documents contain detailed system and equipment description and related information about the product which Tarana Wireless considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since our product will not be marketed and will not be accessible to the general public, Tarana Wireless considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Sincerely, _____________________________ Signature Ivaylo Tankov Sr. Compliance Manager Tarana Wireless, Inc. 2953 Bunker Hill Line Santa Clara CA 95054 Email [email protected]; Ph: 408 351 4085x.156

1 Letter of Authorization May 1st, 2015 To Whom It My Concern Re: AbsoluteAir2 Family Models We undersigned Tarana Wireless Inc, 2953 Bunker Hill Line Santa Clara CA 95054 USA, authorize MiCOM Labs, 575 Boulder Court, Pleasanton CA 94566 USA, to act on our behalf on all matters concerning the above named equipment. This shall include the following: - Testing - Approval applications and procedures - Payment of approval fees We declare that MiCOM Labs, 575 Boulder Court, Pleasanton, CA 94566, USA, is allowed to forward all information related to the approval process for this project to engaged Regulatory Authorities, Notified Bodies, Notification Entities and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. This Letter of Authorization is valid for 180 days since the date above. Sincerely, _____________________________ Signature Ivaylo Tankov Sr. Compliance Manager Tarana Wireless, Inc. 2953 Bunker Hill Line Santa Clara CA 95054 Email [email protected]; Ph: 408 351 4085x.156

1 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 May 31st, 2015 Request for SDR Certification Company Name: Tarana Wireless FCC ID: 2ABOFAA2-235 Re: AbsoluteAir2 Family In accordance with 2.944 of CFR 47, Tarana Wireless, Inc. hereby requests SDR Certification of above specified Products under FCC ID: 2ABOFAA2-235. Product employ restricted contention based protocol and Concentrator Node units use GPS clock to synchronize the links. Sincerely, _____________________________ Signature Ivaylo Tankov Sr. Compliance Manager Tarana Wireless, Inc. 2953 Bunker Hill Line Santa Clara CA 95054 Email [email protected]; Ph: 408 351 4085x.156

1 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 May 31st, 2015 Request for Confidentiality Company Name: Tarana Wireless FCC ID: 2ABOFAA2-235 Re: AbsoluteAir2 Family Gentlemen, In accordance with 0.457 and 0.459 of CFR 47, and KDB 726920, Tarana Wireless, Inc. hereby requests permanent confidentiality of the following document for the subject application.  Internal Photos  Schematics  Block Diagram  Theory of Operation  Bill of Materials The document above contain detailed system and equipment information about the product which Tarana Wireless considers to be proprietary, confidential and a custom design and otherwise would not release to the general public. Since our product will not be marketed and will not be accessible to the general public, Tarana Wireless considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. In addition our products are installed by professional installers and at areas not accessible to the public. NDA will be in place for each purchase with the owner of the equipment and license holder, and the technical staff responsible for initial installation and maintenance. Internal Photos are only provided to FCC as part of Certification process. Each unit is mounted at location not accessible to the general public serviceable only by designated professional technical personal. Disassembly of the product is restricted by being secured with special tamperproof screws. Sincerely, _____________________________ Ivaylo Tankov Sr. Compliance Manager Tarana Wireless, Inc. 2953 Bunker Hill Line Santa Clara CA 95054 Email [email protected]; Ph: 408 351 4085

1 External Photos for AbsoluteAir2 Family Photo 1‐ Bottom View with Connectors Photo 2‐ Back View Side Antenna Panels mounted over the enclosure Side Antenna Panels mounted over the enclosure 2 Photo 3‐ Top View with GPS Antenna (mounted on ALL Models) Photo 4‐ Side View – Antennas on both sides are identical

D C B A A B C D CAD GENERATED DRAWING, DO NOT MANUALLY UPDATE SCALE: SIZE B SHEET: 1 of 1 RE V. DRAWING, OUTLINE, GEN 2 EN LABEL DRAWN BYDRAWN DATE UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: FRACTIONS DECIMALS ANGLES MATERIAL FINISH DO NOT SCALE DRAWING 123 456 7 8 8 7 6 5 4 32 1 REVISIONS RE V. DESCRIPTION DAT EAPPROVED ± 1/32 .XX ± .01 ± 1/2 ° .XXX ± .005 .XXXX ± .0005 1.0 1:1 FILE NAME: SKTW-1025-001-REV-1.0 (Drawing,Outline,GEN 2 EN Label) ZONE PART DESCRIPTION: PART NUMBER: MAY NOT BE REPRODUCED OUTSIDE OF TARANA WIRELESS WITHOUT WRITTEN PERMISSION THIRD ANGLE PROJECTION CONFIDENTIAL: DESIGN DATEDESIGNED BY APPROVED DATEAPPROVED BY T A R A N A W I R E L E S S 6/24/2013 F. LARSEN 1.0INITIAL RELEASE 6/24/14 F. LARSEN 6/24/2013 F. LARSEN SKTW-1025-001 3.92 .43 .69 1.76 2.81 5.65 7.15 .04 7.83 .87 4XR .10 .31 4XR.08 AbsoluteAir 2 Concentrator Node 48-60VDC 1.5AETH1ETH2MGMTETH3USB FCC ID: 2ABOFAA2-235 IC: 14675-AA2-235 The device complies with Part 15 of the FCC Rules and IC Regulations. Operation is subject to the following conditions: This device (1) may not cause harmful interference; (2) must accept any interference received, including interference that may cause undesired operation; and (3) must be professionally installed. Made in U.S.A. AbsoluteAir 2 Edge Node ETH148-60 VDC 1.5AETH 2ETH3MGMT The device complies with Part 15 of the FCC Rules and IC: RSS-210. Operation is subject to the following conditions: This device (1) may not cause harmful interference; (2) must accept any interference received, including interference that may cause undesired operation; and (3) must be professionally installed. Made in U.S.A. FCC ID: 2ABOFAA2-235 IC: 14675-AA2-235

Tracker: TARA05-4 Maximum Permissible Exposure FCC, Part 90 Subpart C §90.1217 Calculations for Maximum Permissible Exposure Levels Power Density = Pd (mW/cm2) = EIRP/(4d 2 ) EIRP = P * G P = Peak output power (mW) G = Antenna numeric gain (numeric) d = Separation distance (cm) Numeric Gain = 10 ^ (G (dBi)/10) The Tarana Wireless AbsoluteAir2 has 16 antenna ports which are split into the following cross polarized offering; 8 horizontally polarized 8 vertically polarized The AbsoluteAir2 operates on two continuous data streams and per KDB 662911 section F(2)e(i) permits the reduction of antennas used for power calculations to 4 directional antennas. For all antennas to be considered, 6 dB will be added to the effective gain of the antenna. Antenna Gain = 12.0 dBi (Numeric 15.85) Effective Antenna Gain = 12.0 + 6.0 = 18.0 (Numeric 63.1) Maximum Power Measured (4 Chains BW 20 MHz, Channel 3660 MHz) = +29.13 dBm EIRP (4 Chains) dBm = 29.13 + 12.0 = 41.13 dBm The EUT belongs to the Controlled Exposure the limit of power density is 5.0 mW/cm 2 Distance (cm) Freq. Band (MHz) Antenna Gain (dBi) Effective Numeric Gain (numeric) Max Peak Output Power (dBm) Peak Output Power (mW/EIRP) Calculated Power Density @ 20cm Calculated Safe Distance @ 5mW/cm 2 Limit(cm) Minimum Separation Distance (cm) 3,660.0 12 63.1 818.5 51,647.4 2.05 28.7 28.7 Note: for mobile or fixed location transmitters the minimum separation distance is 20cm, even if calculations indicate the MPE distance to be less. Specification Maximum Permissible Exposure Limits §90.1217 Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency levels in excess of the Commission’s guidelines. See §1.1307 (b)(1) of this chapter. Limit = 1 mW / cm 2 from 1.310 Table 1 Laboratory Measurement Uncertainty for Power Measurements Measurement uncertainty 1.33dB

COVER PAGE Test of: Tarana Wireless - AbsoluteAir2 To: FCC Part 90 Subpart Z & IC RSS-197 Test Report Serial No.: TARA05-U4 Rev A MiCOM Labs is an ISO 17025 Accredited Testing Laboratory TEST REPORT FROM Test of: Tarana Wireless - AbsoluteAir2 To: FCC Part 90 Subpart Z & IC RSS-197 Test Report Serial No.: TARA05-U4 Rev A This report supersedes NONE Manufacturer: Tarana Wireless 2953 Bunker Hill Lane, Suite #100 Santa Clara, California 95054 USA Product Function: Point-to-Point and Multiple Point to Point Wireless Backhaul Copy No: pdf Issue Date: 3rd June 2015 This Test Report is Issued Under the Authority of; MiCOM Labs, Inc. 575 Boulder Court Pleasanton, CA 94566 USA Phone: +1 (925) 462-0304 Fax: +1 (925) 462-0306 www.micomlabs.com TESTING CERT #2381.01 Title: To: Serial #: Issue Date: Page: Tarana Wireless - AbsoluteAir2 FCC Part 90 Subpart Z & IC RSS-197 TARA05-U4 Rev A 3rd June 2015 3 of 208 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. Any changes will be noted in the Document History section of the report. MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: 925.462.0304, Fax: 925.462.0306, www.micomlabs.com This page has been left intentionally blank Title: To: Serial #: Issue Date: Page: Tarana Wireless - AbsoluteAir2 FCC Part 90 Subpart Z & IC RSS-197 TARA05-U4 Rev A 3rd June 2015 4 of 208 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. Any changes will be noted in the Document History section of the report. MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: 925.462.0304, Fax: 925.462.0306, www.micomlabs.com TABLE OF CONTENTS ACCREDITATION, LISTINGS and RECOGNITION ...................................................... 6 TESTING ACCREDITATION ......................................................................................... 6 RECOGNITION .............................................................................................................. 7 PRODUCT CERTIFICATION ......................................................................................... 8 1. TEST RESULT CERTIFICATE .............................................................................. 10 2. REFERENCES AND MEASUREMENT UNCERTAINTY ..................................... 11 2.1. Normative References ........................................................................................ 11 2.2. Test and Uncertainty Procedures ........................................................................ 11 3. PRODUCT DETAILS AND TEST CONFIGURATIONS ........................................ 12 3.1. Technical Details ................................................................................................. 12 3.2. Scope of Test Program ....................................................................................... 13 3.3. Equipment Model(s) and Serial Number(s).......................................................... 17 3.4. Antenna Details ................................................................................................... 17 3.5. Cabling and I/O Ports .......................................................................................... 17 3.6. Test Configurations ............................................................................................. 18 3.7. Equipment Modifications ..................................................................................... 18 3.8. Deviations from the Test Standard ...................................................................... 18 4. TEST EQUIPMENT CONFIGURATIONS ............................................................. 19 4.1. Conducted Testing .............................................................................................. 19 4.2. Radiated Testing ................................................................................................. 21 4.3. ac Wireline ......................................................................................................... 23 5. MEASUREMENT AND PRESENTATION OF TEST DATA ................................. 24 6. TEST SUMMARY .................................................................................................. 25 7. TEST RESULTS .................................................................................................... 26 7.1. D evice Characteristics ........................................................................................ 26 7.1.1. Occupied Bandwidth ............................................................................ 26 7.1.2. Peak Output Power .............................................................................. 29 7.1.3. Spectrum Mask .................................................................................... 32 7.1.4. Power Spectral Density ........................................................................ 35 7.1.5. Frequency Stability; Temperature Variations, and Voltage Variations .. 38 7.1.6. Spurious Emissions at Antenna Terminals ........................................... 40 7.1.7. Radiated Spurious Emissions .............................................................. 44 7.1.8. AC Wireline Conducted Emissions (150 kHz – 30 MHz) ...................... 55 Title: To: Serial #: Issue Date: Page: Tarana Wireless - AbsoluteAir2 FCC Part 90 Subpart Z & IC RSS-197 TARA05-U4 Rev A 3rd June 2015 5 of 208 This test report may be reproduced in full only. The document may only be updated by MiCOM Labs personnel. Any changes will be noted in the Document History section of the report. MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566 USA, Phone: 925.462.0304, Fax: 925.462.0306, www.micomlabs.com 8. TEST SET-UP PHOTOGRAPHS .......................................................................... 58 8.1. Conducted Measurement Test Set-Up ................................................................ 58 8.2.…

Text truncated - open the document above for the full version.