2ABPFWSAP500CWifi Smart Air Purifier

4 Replace a filter 6 a a a b a c d Remove the cover at the top of the unit. 7 Cleaning and maintenance of your device Wipe your Air purifier with a soft and dry clothe. a Air Purifier Wi-Fi Quick user guide Smart up your life IOS Android CMYK:40,0,100,0 120*160mm CMYK:0,100,100,0 1 Start your Air purifier 2 Download and launch the Air purifier app Remove the cover at the top of the Air purifier. Remove the protective foam. a a b a d e c 4 Select the operating mode from the mobile app In the mobile app, go to the dedicated interface operating modes. a a Choose the mode you want: smart / manual / automatic. a b Click “Apply” to save your settings. a c 5 Power control on the device Press the power button to turn on/off of the unit and adjust the fan power. (Pic. 1) a a Pic. 1 * * Note: smart mode only available on Deluxe version a a Set the Wi-Fi b The device connects to the smartphone (or tablet) when the Wi-Fi light is switched on. Select the Wi-Fi feature in the settings of your smartphone (or tablet). c Follow the app instructions. 3 Cellular Airplane mode Bluetooth Wi-Fi Personal Hotspot Phone Replace the cover on top of the unit. Press the button “ ” on the device. The Wi-Fi light blinking when the unit is ready to be connected. or a a b Launch the app. c Follow the instructions on your mobile app. Remove the old filter, removing the vertical. Replace it with the new filter. Push the tube inside. Put the lid on top of the unit. Setting Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ●Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this device not expressly approved by INNOVATIVE PRECISION INSTRUMENTS LIMITED may void the FCC authorization to operate this device. Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

INNOVATIVE PRECISION INSTRUMENTS LIMITED LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HK TEL: 00852-97938698 FAX: 86-755-86290013 Rev 11/20/07 Confidentiality Letter Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2ABPFWSAP500C. Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operation Description Operation Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Richard Binier / Director

INNOVATIVE PRECISION INSTRUMENTS LIMITED LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HK TEL: 00852-97938698 FAX: 86-755-86290013 AGENCY AUTHORIZATION LETTER FCC ID: 2ABPFWSAP500C Date: June 09, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: We, the undersigned, hereby authorize Shenzhen CTL Testing Technology Co., Ltd.(MR. Tracy Qi) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen CTL Testing Technology Co., Ltd. (MR. Tracy Qi) on our behalf shall have the same effect as acts of our own. This authorization expires on June 08, 2015. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, INNOVATIVE PRECISION INSTRUMENTS LIMITED are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Richard Binier / Director

INNOVATIVE PRECISION INSTRUMENTS LIMITED LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HK TEL: 00852-97938698 FAX: 86-755-86290013 Series Models Description FCC ID: 2ABPFWSAP500C Date: June 09, 2014 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: To whom concern: The device (Product Name: Wifi Smart Air Purifier) Models Name: Model: WSAP500C, WSAP500D, WSAP800C, WSAP800D have same electrical, PCB and BOM, only the model’s name and color are different for marketing requirements. Sincerely, Richard Binier / Director

FCC ID Label Information 1. Label location: 2. FCC ID Label: INNOVATIVE PRECISION INSTRUMENTS LIMITED Wifi Smart Air Purifier Model: WSAP500C FCC ID: 2ABPFWSAP500C This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Shenzhen CTL Testing Technology Co., Ltd. Tel: +86-755-89486194 Fax: +86-755-26636041 FCC PART 15 SUBPART C TEST REPORT FCC Part 15.247 Report Reference No......................: CTL1405191107-WF Compiled by ( position+printed name+signature) .: File administrators Jacky Chen Name of the organization performing the tests ( position+printed name+signature) .: Test Engineer Tracy Qi Approved by ( position+printed name+signature) .: Manager Tracy Qi Date of issue.....................................: June 09, 2014 Test Laboratory Name...................: Shenzhen CTL Testing Technology Co., Ltd. Address ............................................: Floor 1-A, Baisha Technology Park, No.3011, Shahexi Road, Nanshan District, Shenzhen, China 518055 Applicant’s name............................: INNOVATIVE PRECISION INSTRUMENTS LIMITED Address ............................................: LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HK Test specification: Standard ...........................................: FCC Part 15.247: Operation within the bands 902–928 MHz, 2400– 2483.5 MHz, and 5725–5850 MHz. TRF Originator..................................: Shenzhen CTL Testing Technology Co., Ltd. Master TRF.......................................: Dated 2011-01 Shenzhen CTL Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTL Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTL Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Wifi Smart Air Purifier FCC ID.......................................: 2ABPFWSAP500C Trade Mark .......................................: Vigilant Model/Type reference ......................: WSAP500C, WSAP500D, WSAP800C, WSAP800D Work frequency ................................: 802.11b/g/n(20MHz): 2412~2462MHz 802.11n(40MHz): 2422~2452 Type of modulation ...........................: 802.11b DSSS, 802.11g/n: OFDM Data Rate ......................................... : 802.11b: 1/2/5.5/11 Mbps 802.11g: 6/9/12/18/24/36/48/54 Mbps 802.11n: up to 150 Mbps Antenna Gain ...................................: -0.5dBi Antenna type ....................................: Internal Result ............................................... : Positive V1.0 Page 2 of 101 Report No.: CTL140591107-WF T E S T R E P O R T Test Report No. : CTL1405191107-WF June 09, 2014 ______________________________________________________________________________________________ Date of issue Equipment under Test : Wifi Smart Air Purifier Model /Type : WSAP500C Listed Modes : WSAP500D, WSAP800C, WSAP800D Applicant : INNOVATIVE PRECISION INSTRUMENTS LIMITED Address : LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HK Manufacturer : INNOVATIVE PRECISION INSTRUMENTS LIMITED Address : LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HK Test Result according to the standards on page 4: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. V1.0 Page 3 of 101 Report No.: CTL140591107-WF Contents 1. TEST STANDARDS................................................................. 4 2. SUMMARY............................................................................ 5 2.1. General Remarks 5 2.2. Equipment Under Test 5 2.3. Short description of the Equipment under Test (EUT) 5 2.4. EUT operation mode 5 2.5. EUT configuration 6 2.6. NOTE 6 2.7. Related Submittal(s) / Grant (s) 6 2.8. Modifications 6 3. TEST ENVIRONMENT ............................................................. 7 3.1. Address of the test laboratory 7 3.2. Test Facility 7 3.3. Environmental conditions 7 3.4. Configuration of Tested System 7 3.5. Statement of the measurement uncertainty 8 3.6. Equipments Used during the Test 8 3.7. Summary of Test Result 9 4. TEST CONDITIONS AND RESULTS.......................................... 10 4.1. Conducted Emissions Test 10 4.2. Radiated Emission Test 13 4.3. 6dB Bandwidth Measurement 19 4.4. Maximum Peak Output Power 28 4.5. Band Edge Measurement 30 4.6. Power Spectral Density Measurement 63 4.7. Spurious RF Conducted Emission 72 4.8. Operation Frequency Range of 20dB Bandwidth 85 4.9. Antenna Requirement 90 4.10. RF Exposure 91 5. TEST SETUP PHOTOS OF THE EUT ........................................ 92 6. EXTERNAL AND INTERNAL PHOTOS OF THE EUT ..................... 94 V1.0 Page 4 of 101 Report No.: CTL140591107-WF 1. TEST STANDARDS The tests were performed according to following standards: FCC Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2009: American National Standard for Testing Unlicensed Wireless Devices. ANSI C63.4-2009 KDB Publication No. 558074 D01 v03r01 Guidance on Measurements for Digital Transmission Systems V1.0 Page 5 of 101 Report No.: CTL140591107-WF 2. SUMMARY 2.1. General Remarks Date of receipt of test sample : May 24, 2014 Testing commenced on : May 24, 2014 Testing concluded on : June 06, 2014 2.2. Equipment Under Test Power supply system utilised Power supply voltage : ● 120V / 60 Hz ○ 115V / 60Hz ○ 12 V DC ○ 24 V DC ○ Other (specified in blank below) Description of the test mode IEEE 802.11b/g/n: Thirteen channels are provided to the EUT,but only eleventh channels used for USA. Channel Frequency(MHz)ChannelFrequency(MHz) 1 241282447 2 241792452 3 2422102457 4 2427112462 5 2432 6 2437 7 2442 2.3. Short description of the Equipment under Test (EUT) A Wifi Smart Air Purifier support Wi-Fi 802.11b/g/n. For more details, refer to the user’s manual of the EUT. Serial number: Prototype 2.4. EUT operation mode…

Text truncated - open the document above for the full version.

Test Setup Photos of the EUT