2ABU6-DS035Electronic Shelf Label

Shenzhen Minew Technologies Co., Ltd.

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: May 30, 2023
Application Purpose: Original Equipment
Date of Application: May 30, 2023
Equipment Note: Electronic Shelf Label
Frequency Range: 2402.00000000 - 2480.00000000
Company: Shenzhen Minew Technologies Co., Ltd.
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

¡ 0°C-40°C -20°C-60°C IPX5 Address：Building I, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen, 518109, China Phone：+86(755)2103 8160 Email: [email protected] Website： https://www.minewtag.com FCC warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn- ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Attestation Statements

Sh enzhen Minew Technologies Co., Ltd . The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Federa l Communications Commission Authori zation and Evaluation Division Equipment Authori zation Bra nch 7435 Oakland Mills Road Columbia, MD 21046 5/ 25/23 U.S . Agent Designati on [Shenzhen Min ew Technolo gie s Co., Ltd.]acknowledges th eir consent fo r th e following conta ct located in th e Unite d Sta te s to act as th eir agent for service of process for th e equipment for which auth orizati on is sought (FCC ID :2ABU6-DS035): Name and company of U.S . agent: Sijie Zhang / THREE STONES MEDIA LLC Physical U.S . address of agent: 1200 Broadway St. APT 329, Los Angeles, CA90015 FRN of U.S . agent: 0033401761 Email address of U.S . agent: [email protected] o m [THREE STONES MEDIA LLC]acknowledges th eir obligati on to accept service of process on behalf of[Shenzhen Min ew Technolo gie s Co., Ltd.]. [Shenzhen Min ew Technolo gie s Co., Ltd.]with th e FRN[0023364128]accepts its obligati on to mainta in an agent fo r service of process in th e Unite d Sta te s fo r no less th an one year afte r either th e grante e has permanentl y te rminated all marketi ng and importa tion of th e applicable equipment with in th e U.S ., or th e conclusion of any Co mmission-relate d administr ati ve or judicial proceeding involving th e equipment, whichever is later. By signing th is fo rm, we confirm th e above and th at we are aware of th e applicati on requirements liste d under § 2.9 11(d)(7). Sincerely, Signature [Name] yanyan Zhang [Title] Quality Superv isor [Company] Shenzhen Minew Technologies Co., Ltd. Signature [Name of U.S. agent] Sijie Zhang [Title of U.S. agent] [Company of U.S. agent] THREE STONES MEDIA LLC 48_[model] US_Agent_2.911(d)(7)-U, V04

Attestation Statements

ShenzhenMinewTechnologiesCo.,Ltd. TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 5/25/23 Towhomitmayconcern: We,[ShenzhenMinewTechnologiesCo.,Ltd.],herebycertifythattheequipmentforwhich authorizationissought(FCCID:2ABU6-DS035)isnot“covered”equipmentprohibitedfromreceiving anequipmentauthorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). Sincerely, Signature [Name]yanyanZhang [Title]QualitySupervisor [Company]ShenzhenMinewTechnologiesCo.,Ltd. 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 2

External Photos

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

ID Label/Location Info

-R/N- Model: DS035 FCC ID: 2ABU6-DS035 MAC: AC233FXXXXXX SHENZHEN MINEW TECHNOLOGIES CO LTD Made in China

Internal Photos

Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 ANT Photo 7 Photo 8

RF Exposure Info

FCC ID: 2ABU6-DS035 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d GP**30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Measurement Result Operation Frequency: BLE: 2402-2480MHz Power density limited: 1mW/ cm 2 Antenna Type: PCB Antenna Antenna gain: -0.01dBi, R=20cm conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 2402 2.593±14 2.512-0.011.000.00051 2440 3.223±14 2.512-0.011.000.00051 2480 3.083±14 2.512-0.011.000.00051 2402 2.733±14 2.512-0.011.000.00051 2440 3.193±14 2.512-0.011.000.00051 2480 2.963±14 2.512-0.011.000.00051 (mW/cm2 )(mW/cm2) Antenna Gain BLE(1M) Max tune-up power Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) BLE(2M) Conclusion: For the max result : 0.0005≤ 1.0 for Max Power Density, compliance RF exposure.. Signature: Date: 5/26/2023 NAME AND TITLE (Please print or type): Alex Li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Test Report

Report No.: S23050803302001 Version.1.3 Page 1 of 59 RADIO TEST REPORT FCC ID: 2ABU6-DS035 Product: Electronic Shelf Label Trade Mark: Model No.: DS035 Family Model: N/A Report No.: S23050803302001 Issue Date: May 16, 2023 Prepared for Shenzhen Minew Technologies Co., Ltd. 3rd Floor, I Building, Gangzhilong Science Park, Qinglong Road, Longhua District, Shenzhen City, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S23050803302001 Version.1.3 Page 2 of 59 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard .................................................................................................................................. 14 7.1.2 Conformance Limit ................................................................................................................................... 14 7.1.3 Measuring Instruments ............................................................................................................................ 14 7.1.4 Test Configuration .................................................................................................................................... 14 7.1.5 Test Procedure ........................................................................................................................................... 14 7.1.6 Test Results ................................................................................................................................................ 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.2.1 Applicable Standard .................................................................................................................................. 16 7.2.2 Conformance Limit ................................................................................................................................... 16 7.2.3 Measuring Instruments ............................................................................................................................ 17 7.2.4 Test Configuration .................................................................................................................................... 17 7.2.5 Test Procedure ........................................................................................................................................... 18 7.2.6 Test Results ................................................................................................................................................ 19 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.3.1 Applicable Standard .................................................................................................................................. 25 7.3.2 Conformance Limit ................................................................................................................................... 25 7.3.3 Measuring Instruments ............................................................................................................................ 25 7.3.4 Test Setup .................................................................................................................................................. 25 7.3.5 Test Procedure ........................................................................................................................................... 25 7.3.6 Test Results ................................................................................................................................................ 25 7.4 DUTY CYCLE .........................................................…

Text truncated - open the document above for the full version.

Test Report

version01 ShenzhenMinewTechnologiesCo.,Ltd. DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:DS035 FCCID:2ABU6-DS035 fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsforPCBAntennaantennatype(s) describedbelow: ModelNo.ofantenna:ANT-BBNCNC21019 Typeofantenna: PCBAntenna Gainoftheantenna:-0.01dBi Frequencyrange:2400-2480MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:ShenzhenMinewTechnologiesCo.,Ltd. Address:3rdFloor,IBuilding,GangzhilongSciencePark,QinglongRoad,LonghuaDistrict, ShenzhenCity,China City:ShenzhenCity ZIP/Postalcode: Country: China Name:yanyanZhangDate: 25/05/2023 Signature:

Test Report

深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第1页共8页天线型号（AntennaVersion）：ANT-BBNCNC21019 产品型号（ ModeloftheDUT ）： DS035 PCB 编号及版本（ PCBnumberandversion ）： MS164F6_V1.0 责任硬件工程师（ HardwareEngineer ）：窦淼全测试日期（ TestData ）： 2023.4.6 1 、技术指标 (TechnicalSpecification) 电性能指标 ElectricalSpecifications 频率范围 FrequencyRange （ MHz ） 2400-2480 频带宽度 Bandwidth(-10dB) （ MHz ） 150MHZ 输入阻抗InputImpedance（Ω） 50 回波损耗ReturnLoss（dB）＜-13 电压驻波比VSWR＜1.48 增益 Gain(@2.44GHz) （ dBi ） -0.12 峰值增益（ PeakGain ）（ dBi ） -0.01 极化形式PolarizationType 线极化 Linearpolarization 雷电保护 LightningProtection 直流接地（DCgrounding）功率容量PowerCapacity（mW） 1000 机械指标MechanicalSpecifications 天线尺寸 AntennaSize(mm) 19.1mm*2.97mm 辐射体 Radiator 铜 Cuprum 连接器型号 ConnectType 无工作温度WorkingTemperature（°C） -20~50 存储温度StorageTemperature（°C） -40~65 2 、天线外形和尺寸（ theshapeandsizeoftheantenna ）深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第2页共8页 3、测试结果（ Theresultofthetest ）深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第3页共8页 3.1增益和效率 (GainandEfficiency) 深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第4页共8页深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第5页共8页 3.2辐射方向图(R adiationPattern) 深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第6页共8页 3D 方向图 2402MHz2440MHz2480MHz （1）E1，XZ面，phi=0°;（E1，XZplane，phi=0°）深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第7页共8页（ 2 ） E2 ， YZ 面， phi=90 ° ; （ E2 ， YZ 面， phi=90 °）（ 3 ） H ， XY 面， theta=90 ° ; （ H ， XYplane ， theta=90 °）深圳云里物里科技股份有限公司产品天线测试报告（TheAntennaTestReport） Y-YB-CR-089V003密级：绝密/confidentiality 第8页共8页

Test Setup Photos

Radiated Measurement Photos