2ABUF-LM127LM127 Rugged Phone

LM127 Shenzhen Xin Kingbrand Enterprises Co., Ltd Manual Profile Thank you for purchasing LM127 mobile phone, a Series of OINOM. This instruction manual special used to guide you to understand the functions and features of Series of OINOM phone. In addition to common call functions, LM127 also provides you Messages, MP3 player, Video player, EBook, and Camera, etc. It will bring you more convenience and pleasure for your work and life. LM127 provides including rechargeable batteries, charges and many kinds of special accessories for your choosing to use. Unauthorized charger may cause danger, and this would violate the recognition for this phone and guarantee clauses. LM127 has been through the national ministry of information industry network test. The indicators all meet the national standard requirements, and access to the "network access of telecommunications equipment permits" issued by the ministry of information industry. Such as described in this manual is incompatible with your phone, please refer to the mobile phone. The manufacturer has the final interpretation of this manual. The manufacturer reserves the right to modify technical regulations without prior notice. The manufacturer reserves the right to modify the contents of this manual without prior notice. The manufacturer reserves the right to modify the technical product specifications without prior notice. 1 Contents 一、Safety and Performance.....................................3 二、Your LM127.................................................8 三、Preparing for use.........................................10 3.1 Install SIM Card......................................10 3.2 Install Memory Card (T-FLASH Card).....................11 3.3 USB Usage............................................11 3.4 Security Password Usage...............................11 3.4 Connect to Network....................................13 3.5 Charge the battery....................................13 3.6 On/Off the phone......................................14 3.7 Headset..............................................14 四、Basic Function............................................14 4.1 Dial Call............................................14 4.2 Adjust Volume.........................................15 4.3 Answer the incoming call..............................15 4.4 Call Process..........................................16 五、Main Menu.................................................16 5.1 Call Center...........................................17 5.1．1 Call Records.......................................17 5.1．2 Call Setting.......................................17 5.2 Phonebook............................................20 5.3 File Management.......................................21 5.4 Organizer............................................22 2 5.5 Message..............................................24 5.6 Multimedia............................................27 5.7 Network Service.......................................30 5.8 Camera...............................................30 5.9 Settings.............................................32 六、Input Method..............................................36 七、Appendix..................................................36 Common problems and solutions.............................36 Explanation of terms......................................37 3 一、Safety and Performance ◆Emergency Service Dial the emergency call in any country, you can directly dial 112 (or other emergency services call). You need to confirm the mobile power supply has been opened, and in the service area. Enter the emergency services number (112 or other numbers) and press dial key to call. Any digital network has 112 emergency call services. In UK, you can also use 999 standby emergency number, but you must insert a valid SIM card. Note: Due to the nature of cellular network, it can't guarantee the emergency call be success. ◆Personal ̈ Interference might be caused by poor shielding performance of medical devices such as hearing aids and heart pacemakers in the use of radio frequency devices including mobile phones. Consult medical device manufacturer or your doctor before using mobile phone. ̈ Please turn off the phone in which place posted notice required to. These places include hospitals and rest homes and other medical establishments. Because these facilities may be using equipments sensitive to external RF signal. ̈ If you are using personal medical devices, please consult the manufacturer of these devices, to confirm that they are adequately shielded from around the RF signal. You can also ask your doctor the relevant information. ̈ For users with heart disease, you must pay special attention to phone ring volume and vibrating alert Settings. ̈ In oil storages, chemical factories and so on, which have explosive gases, or the location of explosive production process, we should pay close attention to the RP devices use restrictions. In standby state, your mobile phone sill launches the electromagnetic signal. If requested, you should turn off the phone. ̈ To pay attention to traffic safety. Do not use mobile phones while driving. And to use, you should park your car first. ̈ If your phone is lost or stolen, please immediately notify the telecommunications sector, 4 in order to disable the SIM card. It will protect you from the economic losses caused others to take the call. ̈ When you contact the telecommunications department or distributor, they need to know your phone's IMEI number. It's printed on the label on the back of the phone (or input "* # 06 #" to check the IMEI number). Please put the number down and keep, for the future needs. ̈ In order to make your mobile phone is not misused, please take preventive measures, such as: set up mobile phone SIM card PIN code or personal security code, and modify in a timely manner when others know. ̈ Do not remove the battery in standby state mode, it will result in the loss of user data. ̈ When you leave yo…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (current) 2.0 3.0 Jan-31-2012 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 Shenzhen Xin Kingbrand Enterprises Co., Ltd (February 17, 2014) To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ____ Shenzhen Xin Kingbrand Enterprises Co., Ltd ___hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description, model name，FCC ID) FCC ID: 2ABUF-LM127 Product name: LM127 Rugged Phone Model: LM127 We affirm that between SIEMIC and ___ Shenzhen Xin Kingbrand Enterprises Co., Ltd __, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, Client’s signature Name: Luo facheng Title: Project manager Telephone: +86-0755-86125434 Email: [email protected] Company: Shenzhen Xin Kingbrand Enterprises Co., Ltd Address: Kingbrand Industrial Zone, Nanpu Road, Shang liao ling pi keng, Shajing Town, Baoan District, Shenzhen City, Guangdong

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Shenzhen Xin Kingbrand Enterprises Co., Ltd (January 15, 2014) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2ABUF-LM127 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram Long-term confidential - Operation description Long-term confidential - Schematic Long-term confidential - BOM Long-term confidential - Tune up procedure Long-term confidential The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature Luo facheng / Project manager Name: Luo facheng Title: Project manager Telephone: +86-0755-86125434 Email: [email protected] Company: Shenzhen Xin Kingbrand Enterprises Co., Ltd Address: Kingbrand Industrial Zone, Nanpu Road, Shang liao ling pi keng, Shajing Town, Baoan District, Shenzhen City, Guangdong

Shenzhen Xin Kingbrand Enterprises Co., Ltd Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: SUBJECT: FCC Application for ( FCC ID: 2ABUF-LM127) To Whom It May Concern: We, the undersigned, hereby attest to the fact that we will apply the Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. We understand that devices subject to the DoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm Select the "accredited" option to search for FCC recognized accredited test firms. Test facilities located in countries, where the U.S. does not have an operational Telcom MRA are not recognized by the FCC to test for the DoC procedure. Regards, Signatory Signature Date: February 17, 2014 Name: Luo facheng Title: Project manager Telephone: +86-0755-86125434 Email: [email protected] Company: Shenzhen Xin Kingbrand Enterprises Co., Ltd Address: Kingbrand Industrial Zone, Nanpu Road, Shang liao ling pi keng, Shajing Town, Baoan District, Shenzhen City, Guangdong

Full View Top View Bottom View Right View Left View Front View Rear View Bottom View

Label Location

Label size: 40mm*25mm LM127 Rugged Phone Model：LM127 FCC ID：2ABUF-LM127 Shenzhen Xin Kingbrand Enterprises Co., Ltd This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Top View Top View GSM ANTENNA Top View Top View BT ANTENNA SIM 1 SIM 2 Bottom View Bottom View Bottom View Top View Bottom View

Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 1 of 83 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. ANSI/IEEE Std. C95.1-1992 In accordance with the requirements of FCC Report and Order: ET Docket 93-62；FCC 47 CFR Part 2 ( 2.1093) FCC SAR TEST REPORT For Product Name: LM127 Rugged Phone Brand Name: Model No.: LM127 Series Model: N/A Test Report Number: C140124S01-SF Issued for Shenzhen Xin Kingbrand Enterprises Co., Ltd Kingbrand Industrial Zone, Nanpu Road, Shang liao ling pi keng, Shajing Town, Baoan District, Shenzhen City, Guangdong Issued by Compliance Certification Services Inc. Kun shan Laboratory No.10 Weiye Rd., Innovation park, Eco&Tec, Development Zone, Kunshan City, Jiangsu, China TEL: 86-512-57355888 FAX: 86-512-57370818 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 2 of 83 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Revision REPORT NO. Date Page Revised Contents Original C140124S01-SF February 14, 2014 N/A N/A 01 C140124S01-SF February 21, 2014 27 Update Bluetooth Modulation Technique 01 C140124S01-SF February 21, 2014 21 Update section 11.1Tissue Dielectric Parameters Normative reference and relevant information Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 3 of 83 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) ........................................................... 4 2. EUT DESCRIPTION....................................................................................................................5 3. REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC................................ 6 4. TEST METHODOLOGY.............................................................................................................. 6 5. TEST CONFIGURATION ............................................................................................................ 6 6. DOSIMETRIC ASSESSMENT SETUP........................................................................................ 7 6.1 MEASUREMENT SYSTEM DIAGRAM ...........................................................................................................8 6.2 SYSTEM COMPONENTS...............................................................................................................................9 7. EVALUATION PROCEDURES ................................................................................................. 12 8. MEASUREMENT UNCERTAINTY............................................................................................ 16 9. EXPOSURE LIMIT .................................................................................................................... 17 10. EUT ARRANGEMENT .............................................................................................................. 18 10.1 ANTHROPOMORPHIC HEAD PHANTOM .................................................................................................18 10.2 DEFINITION OF THE “CHEEK/TOUCH” POSITION...................................................................................19 10.3 DEFINITION OF THE “TILTED” POSITION ................................................................................................20 11. MEASUREMENT RESULTS..................................................................................................... 21 11.1 TEST LIQUIDS CONFIRMATION ...............................................................................................................21 11.2 LIQUID MEASUREMENT RESULTS ..........................................................................................................22 11.3 SYSTEM PERFORMANCE CHECK...........................................................................................................23 11.4 EUT TUNE-UP PROCEDURES AND TEST MODE....................................................................................25 11.5 SAR TEST CONFIGURATIONS..................................................................................................................28 11.6 EUT SETUP PHOTOS ................................................................................................................................30 11.7 SAR MEASUREMENT RESULTS...............................................................................................................31 11.8 REPEATED SAR MEASUREMENT ............................................................................................................33 11.9 SAR HANDSETS MULTI XMITER ASSESSMENT.....................................................................................34 12. EUT PHOTO ............................................................................................................................. 37 13. EQUIPMENT LIST & CALIBRATION STATUS........................................................................ 41 14. FACILITIES............................................................................................................................... 42 15. REFERENCES.................................................................................…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 1 of 23 GSM 850-Right Head Cheek Low CH128........................................................................................ 2 GSM 850-Right Head Cheek Middle CH190.................................................................................... 3 GSM 850-Right Head Cheek High CH251........................................................................................ 4 GSM 850-Right Head Tilted Middle CH190..................................................................................... 6 GSM 850-Left Head Cheek Low CH128........................................................................................... 7 GSM 850-Left Head Cheek Middle CH190....................................................................................... 8 GSM 850-Left Head Cheek High CH251.......................................................................................... 9 GSM 850-Left Head Tilted Middle CH190...................................................................................... 10 GSM 850-Right Head Cheek High CH251 Repeated....................................................................11 GSM 850-Left Head Cheek High CH251 Repeated..................................................................... 12 PCS 1900-Right Head Cheek Middle CH661................................................................................ 13 PCS 1900-Right Head Tilted Middle CH661.................................................................................. 14 PCS 1900-Left Head Cheek Middle CH661................................................................................... 15 PCS 1900-Left Head Tilted Middle CH661..................................................................................... 17 GPRS 850-Body Up High CH251..................................................................................................... 18 GPRS 850-Body Down High CH251............................................................................................... 19 GSM 850-Body Down High CH251.................................................................................................. 20 GPRS 1900-Body Front Middle CH661.......................................................................................... 21 GPRS 1900-Body Rear Middle CH661........................................................................................... 22 PCS 1900-Body Rear Middle CH661............................................................................................... 23 Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 2 of 23 Test Laboratory: Compliance Certification Services Inc. Date: 1/26/2014 GSM 850-Right Head Cheek Low CH128 DUT: LM127 Rugged Phone; Type: HO600; Serial: 861187020063726 Communication System: Generic GSM; Communication System Band: GSM850; Frequency: 824.2 MHz;Duty Cycle: 1:8.30042 Medium parameters used (interpolated): f = 824.2 MHz; σ = 0.896 S/m; ε r = 41.182; ρ = 1000 kg/m 3 Room Ambient Temperature: 22°C; Liquid Temperature: 21.5°C Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration: • Probe: EX3DV4 - SN3798; ConvF(9.16, 9.16, 9.16); Calibrated: 7/26/2013; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 7/25/2013 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • DASY52 52.8.5(1059); • SEMCAD X Version 14.6.8 (7028) GSM850/Right Head Cheek Low CH128/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.04 W/kg GSM850/Right Head Cheek Low CH128/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 22.734 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 1.18 W/kg SAR(1 g) = 0.901 W/kg; SAR(10 g) = 0.647 W/kg Maximum value of SAR (measured) = 1.06 W/kg Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 3 of 23 Test Laboratory: Compliance Certification Services Inc. Date: 1/26/2014 GSM 850-Right Head Cheek Middle CH190 DUT: LM127 Rugged Phone; Type: HO600; Serial: 861187020063726 Communication System: Generic GSM; Communication System Band: GSM850; Frequency: 836.6 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 837 MHz; σ = 0.908 S/m; ε r = 41.072; ρ = 1000 kg/m 3 Room Ambient Temperature: 22°C; Liquid Temperature: 21.5°C Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration: • Probe: EX3DV4 - SN3798; ConvF(9.16, 9.16, 9.16); Calibrated: 7/26/2013; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn1245; Calibrated: 7/25/2013 • Phantom: Twin SAM Phantom; Type: QD 000 P40 CD; Serial: 1609 • DASY52 52.8.5(1059); • SEMCAD X Version 14.6.8 (7028) GSM850/Right Head Cheek Middle CH190/Area Scan (7x10x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.25 W/kg GSM850/Right Head Cheek Middle CH190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.217 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 1.28 W/kg SAR(1 g) = 0.975 W/kg; SAR(10 g) = 0.694 W/kg Maximum value of SAR (measured) = 1.15 W/kg Compliance Certification Services Inc. Report No: C140124S01-SF FCC ID: 2ABUF-LM127 Date of Issue :February 21, 2014 Page 4 of 23 Test Laboratory: Compliance Certification Services Inc. Date: 1/26/2014 GSM 850-Right Head Cheek High CH251 DUT: LM127 Rugged Phone; Type: HO600; Serial: 861187020063726 Communication System: Generic GSM; Communication System Band: GSM850; Frequency: 848.8 MHz;Duty Cycle: 1:8.30042 Medium parameters used: f = 849 MHz; σ = 0.92 S/m; ε r = 40.971; ρ = 1000 kg/m 3 Room Ambient Temperature: 22°C; Liquid Temperature: 21.5°C Phantom section: Right Section Measurement…

Text truncated - open the document above for the full version.

Shenzhen Certification Technology Service Co., Ltd. 2F, Building B, East Area of Nanchang Second Industrial Zone, Gushu 2nd Road, Bao'an District, Shenzhen 518126, P.R. China FCC ID: 2ABUF-LM127 Page 1 of 46 TEST REPORT FCC ID: 2ABUF-LM127 Applicant : Shenzhen Xin Kingbrand Enterprises Co., Ltd Address : Kingbrand Industrial Zone, Nanpu Road, Shang liao ling pi keng, Shajing Town, Baoan District, Shenzhen City, Guangdong Equipment Under Test(EUT): Name : LM127 Rugged Phone Model : LM127 In Accordance with: FCC PART 2; FCC PART 22H; FCC PART 24E Report No : CST-TCB140118001 Date of Test : February 10-16, 2014 Date of Issue : February 17, 2014 Test Result: PASS In the configuration tested, the EUT complied with the standards specified above Authorized Signature ___________________________ (Mark Zhu) General Manager The manufacture should ensure that all the products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of Shenzhen Certification Technology Service Co., Ltd. Or test done by Shenzhen Certification Technology Service Co., Ltd. Approvals in connection with, distribution or use of the product described in this report must be approved by Shenzhen Certification Technology Service Co., Ltd. Approvals in writing. Report No.: CST-TCB140118001 FCC ID: 2ABUF-LM127 Page 2 of 46 Contents 1. General Information...............................................................................................................4 1.1. Description of Device (EUT)..........................................................................................4 1.2. Test Lab information.......................................................................................................4 2. Summary of test......................................................................................................................5 2.1. Summary of test result....................................................................................................5 2.2. Assistant equipment used for test...................................................................................5 2.3. Test mode........................................................................................................................6 2.4. Test Environment Conditions.........................................................................................6 2.5. Measurement Uncertainty (95% confidence levels, k=2)...............................................6 2.6. Test Equipment...............................................................................................................7 3. Conducted Output power.......................................................................................................8 3.1. Block Diagram of Test Setup..........................................................................................8 3.2. Limit...............................................................................................................................8 3.3. Test Procedure.................................................................................................................8 3.4. Test Result.......................................................................................................................8 4. Radiated Output power..........................................................................................................9 4.1. Block Diagram of Test Setup..........................................................................................9 4.2. Limit...............................................................................................................................9 4.3. Test Procedure.................................................................................................................9 4.4. Test Result.....................................................................................................................10 5. Occupied Bandwidth............................................................................................................11 5.1. B lock Diagram of Test Setup.......................................................................................11 5.2. Limit.............................................................................................................................11 5.3. Test Procedure...............................................................................................................11 5.4. Test Result.....................................................................................................................12 5.5. Orginal test data............................................................................................................12 6. Frequency stability...............................................................................................................16 6.1. Block Diagram of Test Setup........................................................................................16 6.2. Limit.............................................................................................................................16 6.3. Test Procedure...............................................................................................................16 6.4. Test Result.....................................................................................................................17 7. Conducted spurious emissions.............................................................................................19 7.1. Block Diagram of Test Setup........................................................................................19 7.2. Limit.............................................................................................................................19 7.3. Test …

Text truncated - open the document above for the full version.

Radiated Emission Test Setup in Chamber Below 1G Above 1G Conducted Emission Test Setup