2ABZWGUSBT-350KPart 18 Consumer Device

I .Specification 1). Item No.: BT-350K 2). Power Rate: 1800W 3). Voltage: 120V~ 60 Hz 4). Operating Temperature: 60 °C -240 °C 1 Metal enclosure 2 Glass-ceramic plate 3 LED display 4 ON/OFF button II .Cautions 1). Do not plug with wet hands. 2). Do not plug into a socket where several other appliances are plugged in. 3). Do not use if the plug cord is damaged or the power plug does not fit the socket safely. 4). Do not modify the parts, or repair the unit by yourself. 5). Do not use the unit near flame or wet places. 6). Do not use where children can easily touch the unit, or allow children to use the unit by themselves. 7). Do not place on unstable surfaces. 8). Do not move the unit when the pot or the pan is on it. 9). Do not heat the pot empty or overheat the pot. 10). Do not place metallic objects such as knives, fo rks, spoons, lids, cans, and aluminum foils on the top plate since they can get hot. 11). Use the unit with sufficient space around it. Keep t he front side and either right or left side of the unit clear. 12). Do not use the unit on carpet or tablecloth (vinyl) or any other low-heat-resistant article. 13). Do not place a sheet of paper between the pot or the pan and the unit. The paper may get burnt. 14). If the surface is cracked, switch off to avoid the possibility of electric shock and then take to the service center immediately. 15). Do not block air intake or exhaust vent. 16). Do not touch the top plate right after removing the pot or the pan, as the top plate will still be very hot. 17). Do not place the unite near to the objects which ar e affected by magnet, such as: radios, televisions, automatic-banking cards and cassette tapes. 18). The power cord must be replaced by qualified technicians. 19 ） CAUTION: Hot surface. 20) The temperature of accessible surfaces may be high when the appliance is operating. 21) Aluminium foil and plastic vesse ls not placed on hot surfaces. 22) the glass-ceramic surfaces are not to be used for storage. 23) metallic objects such as kitchen utensils, cutlery et c. shall not be placed on the hob surface within the cooking zones since they could get hot; 24) take care when operating the appliance, as rings, wa tches and similar objects worn by the user could get hot when in close proximity to the hob surface 25) only use vessels of the type and size recommended. 26) After use, switch the hob element off by means of its control. Do not rely on the pan detector. 27) appliance not to be cleaned with water jet; 28) any repairs shall be carried out only by persons trained or recommended by the manufacturer. 29) care be taken to ensure that the splashback and surrounding area free of metallic surfaces 30) non-ionizing electromagnetic radiation 31) Appliance is not intended to be operated by means of an external timer or separate remote-control system. 32) Users with heart pacemakers should consult wi th the manufacturer, unless specific details are given. 33) Additional protective device of residual current device of 30 mA s hall be installed on the fixed wiring before connected to the fixed wiring III .How to Use 1). Place suitable cooking utensils in the center of the top plate and plug in, the power light will shine 2). Pressing ON/OFF button, power light will shut off, and the light of Function will flash 3). Pressing Function button, the cooker will heat at 5- level. Set the cooker at desired power by directly pressing to adjust the power from 1 to 10or 10 to 1. 4). Function: Press the Function pad and to select POWER, TEMP and TIMER. The appliance is equipped with an overheat protecti on. If the pot or pan is getting too hot, the appliance will switch off power, a buzzer sounds and on the display occurs “ E02”. Should this happen, wait for some minutes and cool the appliance down. After that, the appliance works without problems. If meat or vegetables should the r oasted, please use the temperatur e function to avoid any over 1 2 3 4 heating . POWER: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 TEMP: 60 °C , 80 °C , 100 °C , 120 °C , 140 °C , 160 °C , 180 °C , 200 °C , 220 °C , 240 °C TIMER: 0, 5, 10, 15, ...180; 5 minutes per interval. 5). The preset temperature and timer are 180and 00 respectively. 6). When pressing TIMER, the light of TIMER and one of the light of Heating or TEMP will shine correspondently, the cooker will enter the state of Setting Time. Timer can be adjusted by " ” or “ ” from 0 – 180 minutes. Five seconds later, the window will atomically shift to the state display of correspondent function. If users need know the count down time, press Timer again. The display window will show the countdown time. 7). This induction cooker is equipped with memory f unction. The power level, temperature level and timer level interval will be stored even you change from POWER to TEMP and then back to POWER. 8). If you want to cancel TIMER function, simp ly press ON/OFF. Press ON/OFF to start again. 9). This appliance is liabl e to get hot during use. 10).The temperature of accessible surfaces may be high when the appliance is operating IV .Usable and Non-usable Utensils 1). Usable Pans Steel or cast iron, enameled iron, stainless steel, flat -bottom pans / pots with diameter from 12 to 26cm. Enameled Iron Iron or Enameled Castiron Pan Iron Pot Deep-Fry Pan Stainless Steel Pot Iron Plate Pot Iron Pot 2). Non-usable Pans Heat-resistant glass, ceramic container, copper , aluminum pans/pots. Rounded-bottom pans/pots with bottom measuring less than 12cm. Rounded Bottom Aluminum Bottom Measuring Pot with Stands Ceramic Pot Heat-Resistant Pot Copper Pot Less than 12cm Glass Pot V .How to Clean 1). Disconnect plug and wait until the unit is cooled down completely. Clean after using every time. 2). If the pots/pans are used without being cleaned, discoloration or cooked on stains may be caused. 3). Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker. 4). Wipe using dish washing agent and damp cloth. 5). Use vacu…

Text truncated - open the document above for the full version.

Ace Mart Restaurant Supply. 2653 Austin Highway San Antonio, Texas, USA DATE :2014-03-17 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint ATC Lab Co., Ltd ( Guangdong, China) (Name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with Ace Mart Restaurant Supply. 2653 Austin Highway San Antonio, Texas, USA ( applicant name and address) Dated this / Day of 03/17/2014 / Agency agreement expiration date: 03/17/2015 B y: AnthonySalemi Signature Printed Title: Director of Purchasing On behalf of : Ace Mart Restaurant Supply Telephone: 210-683-7819

Ace Mart Restaurant Supply. 2653 Austin Highway San Antonio, Texas, USA Request for Confidentiality: MUST BE ON COMPANY LETTERHEAD AND SIGNED BY OFFICIAL OF APPLICANT COMPANY DATE 2014-03-17 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2ABZWGUSBT-350K Product Name: Induction Cooker Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Part list • Operational description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this / Day of 03/17/2014 / By: Anthony Salemi Signature Printed Title: Director of Purchasing On behalf of : Ace Mart Restaurant Supply Telephone: 210-683-7819

External Photos of EUT Sample

Label of BT-350K Label Location for B T -350K Rating label Back board

Internal Photos of EUT Sample

ATC Lab Co., Ltd (Guangdong, China). 205#, Yingfeng Building, Ronggu Rd, Ronggui,Shunde,Foshan,Guandong,China. Tel:+86 757-28375537 Fax: +86 757-28375535 FCC ID: 2ABZWGUSBT-350K Report No.: FCC140314005I Page: 1 of 20 Authorized Signature: Louis Lu Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of ATC Technology Approvals or testing done by ATC Technology Approvals in connection with, distribution or use of the product described in this report must be approved by ATC Technology Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. FCC REPORT Application No.: FCC140303005IA Applicant: Ace Mart Restaurant Supply Address of Applicant: 2653 Austin Highway San Antonio, Texas, USA FCC ID: 2ABZWGUSBT-350K Equipment Under Test (EUT): EUT Name: Induction Cooker Item No.: BT-350K Serial No.: Not supplied by client Standards: FCC Part 18:2009 Date of Receipt: 03 March,2014 Date of Test: 05 March,2014 to 07 March,2014 Date of Issue: 14 March,2014 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. ATC Lab Co., Ltd (Guangdong, China). Report No.: FCC140314005I Page: 2 of 20 FCC ID: 2ABZWGUSBT-350K Test Summary Test Test Requirement Test Method Standard Paragraph Result Conducted Emission FCC PART 18:2009 FCC MP-5:1986 Section 18.307(a) PASS Radiated Emission FCC PAR 18:2009 FCC MP-5:1986 Section 18.305(b) PASS The model BT-350K was chosen to be tested in the report. ATC Lab Co., Ltd (Guangdong, China). Report No.: FCC140314005I Page: 3 of 20 FCC ID: 2ABZWGUSBT-350K 1 Contents Page TEST SUMMARY .............................................................................................................................................................. 2 1 CONTENTS .............................................................................................................................................................. 3 2 GENERAL INFORMATION ................................................................................................................................... 4 2.1 CLIENT INFORMATION ....................................................................................................................................... 4 2.2 GENERAL DESCRIPTION OF E.U.T. .................................................................................................................. 4 2.3 TEST LOCATION ................................................................................................................................................ 4 2.4 TEST SUPPORTING SYSTEM DETAILS .............................................................................................................. 4 2.5 TEST FACILITY ................................................................................................................................................... 5 2.6 MEASUREMENT UNCERTAINTY ......................................................................................................................... 5 2.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................. 5 3 EQUIPMENT USED DURING TEST .................................................................................................................... 6 4 TEST RESULTS ...................................................................................................................................................... 7 4.1 CONDUCTED EMISSIONS ................................................................................................................................... 7 4.1.1 Test Setup .................................................................................................................................................. 8 4.1.2 Test Procesure ........................................................................................................................................... 8 4.1.3 Measurement Data .................................................................................................................................... 8 4.2 RADIATED EMISSIONS ..................................................................................................................................... 10 4.2.1 Test Setup ................................................................................................................................................ 11 4.2.2 Test Prosesure ......................................................................................................................................... 12 4.2.3 Measurement Data .................................................................................................................................. 12 5 PHOTOGRAPHS ................................................................................................................................................... 14 5.1 CONDUCTED EMISSION TEST SETUP ............................................................................................................. 14 5.2 RADIATED EMISSION TEST SETUP ................................................................................................................. 14 5.3 EUT CONSTRUCTIONAL DETAILS ................................................................................................................... 15 ATC Lab Co., Ltd (Guangdong, China). Report No.: FCC140314005I Page: 4 of 20 FCC ID: 2ABZWGUSBT-350K 2 General Information 2.1 Client Information Applican…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS 1. Conducted Emission Test Setup 2. Radiated Emission Test Setup