2AC6P-SOUNDPOP2Bluetooth Speaker Phone

Sound pOp 2 Owner’s Manual 8100.SOUNDPOP2 Congratulations on your purchase of the AudioSource® Sound pOp 2™ Bluetooth Speaker – the latest in mobile audio technology. Please retain this document for further reference and take a few moments to read this entire manual. Please read and observe all instruction. NOTE: if any part of this product is damaged or missing, please call your dealer or AudioSource® directly at 1.877.715.5439 Please read your warranty and retain your receipt and original carton for possible future use. For more information about AudioSource® electronics, speakers, and accessories, please visit www.audiosource.net Specifications Bluetooth version 4.0, Class 2 HFP v1.6, HD Voice, A2DP, AVRCP mSBC codec for High Quality Audio IPX4 rated water resistance Noise Cancellation/Echo Reduction for clear calls 1.5” High definition/High efficiency driver 500mAH UL listed battery (up to 8 hours play time) Charge using any USB port Silicone rubber case TPR (Thermoplastic Rubber) suction cup Dimensions: 2.87”H, 2.65”D English PackageContents: • Sound pOp 2™ Bluetooth Wireless Speaker • USB Charging Cable •Instruction Manual Features 1. 2. 3. 4. 5. 6. 7. USBChargingSources GettingStarted Charging Sound pOp 2™ 1. Plug included USB cable into the micro USB port on the back of Sound pOp 2™. 2. Connect USB cable to a USB port on a computer or USB power adaptor. Status Indicator LED will light solid once Sound pOp 2™ is connected to a power source. 3. Charge Sound pOp 2™ fully. This will take approximately 3-4 hours. Status Indicator LED will not appear once Sound pOp 2™ is fully charged. 4. Once Sound pOp 2™ is fully charged, Sound pOp 2™ is ready to pair with your Bluetooth device. Pairing Sound pOp 2™ 1. Press Power On Button for 5 seconds, Status Indicator LED will flash quickly. 2. Turn on the Bluetooth feature on your mobile device or Computer. Enable device discovery if not automatically enabled. 3. Search and select “ Sound pOp 2” in the list on your device. Note: Some devices may require a pass code. Please use 0000 if prompted. 4.Status Indicator LED will flash slowly once paired and connected. 5. Sound pOp 2™ is now ready to play music from your Bluetooth device. 6. To turn off Sound pOp 2™, press the Power On/Off button for 5 seconds. InCase of Trouble 1. Ensure Sound pOp 2™ is fully charged, Sound pOp 2™ will not be able to pair if Sound pOp 2™ is not charged. 2. Turn Sound pOp 2™ off and retry “Pairing Sound pOp 2™.” 3. Ensure Bluetooth is enabled on your device and retry “Pairing Sound pOp 2™.” 4. Move Sound pOp closer to your Bluetooth device and retry “Pairing Sound pOp 2™.” 5. Try pairing Sound pOp 2™ with a different Bluetooth device. 6. Sound pOp 2™ will not be able to pair if currently paired to a device (Status Indicator LED will flash slowly). Try unpairing with other devices and retry “Pairing Sound pOp 2™.” For FurtherAssistance Please visit our website at www.audiosource.net or contact our customer service department at [email protected] or call us at 1.877.715.5439 Limited Warranty AudioSource, a division of Peak Audio Group, warrants this product against defects in materials and workmanship for a limited period of time. For a period of 90 days from date of original purchase, we will repair or replace the product, at our option, without charge for parts. The limited warranty period for factory refurbished products expires after ninety (90) days from date of original purchase. This limited warranty applies only to purchases from authorized AudioSource Retailers or Distributors. This limited warranty is extended only to the original purchaser and is valid only to consumers in the United States. Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource Retailer or Distributor when making a claim against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures resulting from accident, fire, flood, misuse, abuse, neglect, mishandling, missapplication, alteration, faulty installation, modification, service by anyone other than AudioSource, or damage that is attributable to Acts of God. It does not cover costs of transportation to AudioSource or damage in transit. The customer should return their defective product, freight prepaid and insured, to AudioSource only after receiving a Return Authorization. Repair or replacement under the terms of this warranty does not extend the term of this warranty. Should a product prove to be defective in workmanship or material, the consumer’s sole remedies will be repair or replacement as provided under the terms of this warranty. If the defective product is discontinued AudioSource may replace the product with an equivalent or superior product at its option. Under no circumstances shall AudioSource be liable for loss or damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express warranties other than described above. AudioSource ©2014 13970 SW 72nd Ave, Portland, OR 97223 www.audiosource.net BluetoothWireless Sources 1. Status Indicator LED: solid – charging quick flash– pairing mode slow flash – paired to a device 2. Power On/Off Button 3. Plus Button: short push/tap – volume up long push/hold – track forward 4. Microphone 5. Phone Button: short push/tap – play/pause and accept/end call long push/hold – dial most recent in call log 6.Minus Button: short push/tap – volume down long push/hold – track backward 7. Micro USB Charging Port (reverse of displayed side) FN:80-MD101-97-2126-01 2014-9-9 www.audiosource.net FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or…

Text truncated - open the document above for the full version.

2AC6P-SOUNDPOP2

External Photos

FCC ID:2AC6P-SOUNDPOP2 10mm 26mm

internal photos

INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is a bluetooth® speaker phone with Bluetooth function. The EUT was powered by DC 3.7V lithium battery and charged by DC 5V USB port. For more detail information pls. refer to the user manual. Modulation Type: GFSK for BT 4.0 and GFSK, π/4 DQPSK, 8DPSK for BT 3.0+EDR. Bluetooth Version: 4.0 and 3.0 with EDR. Antenna Type: Integral antenna. Antenna Gain: 0dBi. The nominal conducted output power specified: 5dBm +/-3dB. The nominal radiated output power (e.i.r.p) specified: 5dBm (+/- 3dB) According to the KDB 447498: Th e maximun peak radiated emission for the EUT is 102.4dBμV/m at 3m in the frequency 2441MHz of BT 3.0+EDR The EIRP = [(FS*D) ^2 / 30] mW = 7.17dBm which is within the production variation. The minimum peak radiated emission for the EUT is 98.0 dBμV/m at 3m in the frequency 2480MHz of BT 4.0 The EIRP = [(FS*D) ^2 / 30] mW = 2.77dBm which is within the production variation. The maximun conducted output power specified is 8dBm = 6.3mW The source- based time-averaging conducted output power = 6.3 * Duty Cycle mW (where Duty Cycle≤1) ≤ 6.3 mW Th e SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.5 mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. FCC ID: 2AC6P-SOUNDPOP2

BT 3.0+EDR BT 4.0

BT 3.0+EDR BT 4.0

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_TX_b Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China T el: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com Peak Audio Group, LLC Application For Certification FCC ID: 2AC6P-SOUNDPOP2 bluetooth® speaker phone M odel: sound pOp2 Brand name: AudioSource 2.4GHz Transceiver Report No.: 140904007SZN-001 W e hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-13] Prepared and Checked by: Approved by: Sign on file Vincent Chen Engineer Andy Yan Senior Project Engineer Date: October 16, 2014 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AC6P-SOUNDPOP2 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Confidentiality Request EXHIBIT 10: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AC6P-SOUNDPOP2 ii M EASUREMENT/TECHNICAL REPORT Peak Audio Group, LLC - MODEL: sound pOp2 Brand name: AudioSource FCC ID: 2AC6P-SOUNDPOP2 This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-13 Edition] provision. Report prepared by: Vincent Chen Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8601 0684 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AC6P-SOUNDPOP2 iii T able of Contents 1.0 General Description............................................................................................................................................ 2 1.1 Product Description........................................................................................................................................... 2 1.2 Related Submittal(s) Grants............................................................................................................................. 2 1.3 Test Methodology.............................................................................................................................................. 2 1.4 Test Facility....................................................................................................................................................... 2 2. 0 System Test Configuration................................................................................................................................ 4 2.1 Justification. ........................................................................................................................................................ 4 2.2 EUT Exercising Software.................................................................................................................................. 4 2.3 Special Accessories.......................................................................................................................................... 4 2.4 Equipment Modification..................................................................................................................................... 4 2.5 Measurement Uncertainty................................................................................................................................. 5 2.6 Support Equipment List and Description......................................................................................................... 5 3. 0 Emission Results................................................................................................................................................ 7 3.1 Radiated Test Results....................................................................................................................................... 8 3.1.1 Field Strength Calculation.............................................................................................................................. 8 3.1.2 Radiated Emission Configuration Photograph.............................…

Text truncated - open the document above for the full version.

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_TX_b Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com Peak A u d io Group, LLC Application For Certification FCC ID: 2AC6P-SOUNDPOP2 bluetooth® speaker phone Model: sound pOp2 Bran d name: AudioSource 2.4GHz Transceiver Report No.: 140904007SZN-002 We h ereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-13] Prepared and Checked by: Approved by: Sign on file Vincent Chen Engineer Andy Yan Senior Project Engineer Date: October 16, 2014 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AC6P-SOUNDPOP2 i LIST OF EXHIBITS I NTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Confidentiality Request EXHIBIT 10: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AC6P-SOUNDPOP2 ii M EA S U REMENT/TECHNICAL REPORT Peak Audio Group, LLC - MODEL: sound pOp2 Brand name: AudioSource FCC ID: 2AC6P-SOUNDPOP2 This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-13 Edition] provision. Report prepared by: Vincent Chen Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8601 0684 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AC6P-SOUNDPOP2 iii T a b l e of Contents 1.0 General Description............................................................................................................................................ 2 1.1 Product Description........................................................................................................................................... 2 1.2 Related Submittal(s) Grants............................................................................................................................. 2 1.3 Test Methodology.............................................................................................................................................. 2 1.4 Test Facility....................................................................................................................................................... 2 2.0 Sy stem Test Configuration................................................................................................................................ 4 2.1 Justification.... ..................................................................................................................................................... 4 2.2 EUT Exercising Software.................................................................................................................................. 4 2.3 Special Accessories.......................................................................................................................................... 4 2.4 Equipment Modification..................................................................................................................................... 4 2.5 Measurement Uncertainty................................................................................................................................. 5 2.6 Support Equipment List and Description......................................................................................................... 5 3.0 Em ission Results................................................................................................................................................ 7 3.1 Radiated Test Results....................................................................................................................................... 8 3.1.1 Field Strength Calculation.............................................................................................................................. 8 3.1.2 Radiated Emission Configuration Photograph....................…

Text truncated - open the document above for the full version.

Radiated Photos

Conducted photos