2ACCJA011GSM Quad-band/UMTS Quad-band/LTE Penta-band mobile phone

1 English - CJB35H1ALAAA Quick Start Guide Thank you for buying ALCATEL ONETOUCH 5054A. We hope you will enjoy your high-quality mobile communication experience. For more information about how to use your cellphone, please visit www.alcatelonetouch.com to download the complete user manual. From the website, you can consult the FAQ, perform software upgrades, etc.




TM 5054A 23 PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on page 30 of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. 1 Your mobile ������������������ 1�1 Keys and connectors Micro-USB Connector Front camera Headset connector Proximity & Light Sensor Home key Touch screen Back key Menu key Table of Contents 1 Your mobile ���������������������������������������������������������������������3 2 Text input ����������������������������������������������������������������������14 3 Phone call ����������������������������������������������������������������������15 4 Contacts ������������������������������������������������������������������������17 5 Messaging�����������������������������������������������������������������������18 6 Email ������������������������������������������������������������������������������19 7 Getting connected ��������������������������������������������������������20 8 Find my location using GPS satellites ������������������������22 9 Data backup ������������������������������������������������������������������22 10 Factory data reset ��������������������������������������������������������23 11 Applications & Internal storage ����������������������������������23 12 Making the most of your phone ����������������������������������24 Safety and use �������������������������������������������������������������������������26 General information ��������������������������������������������������������������35 Warranty ���������������������������������������������������������������������������������36 Troubleshooting����������������������������������������������������������������������38 LED indicator 45 Camera Camera Flash/ Flashlight Power key Volume key Back key • Touch to go back to the previous screen, or to close a dialog box, options menu, the notification panel, etc. Home key • From any application or screen, touch to return to the Home screen. • Long press to pop up Google search icon. Slide your finger to the icon to open Google search. Menu key • Touch to view recently used applications. • Touch to close any application. • Touch the brush icon on the bottom of the screen to close all applications. Power key • Press: Lock the screen/Light up the screen. • Press and hold: Show the popup menu to select from Power off/Restart/Airplane mode. • Press and hold the Power key and Volume down key to capture a screenshot. • Press and hold the power key for 8 seconds to power off or hold it for 10 seconds or more to force reboot. Volume Keys • In call mode, adjusts the earpiece or headset volume. • In Music/Video/Streaming mode, adjusts the media volume. • In general mode, adjusts the ringtone volume. • Mutes the ringtone of an incoming call. 67 1�2 Getting started 1�2�1 Set up Removing or installing the back cover Inserting or removing the SIM card You must insert your SIM card to make phone calls. Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the SIM card, press and slide it out. Your phone only supports micro-SIM card. Do not attempt to insert other SIM types like mini and nano cards, otherwise you may damage your phone. Installing the microSD card Place the microSD card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the microSD card, press and slide it out. Charging the battery To charge the battery, connect the charger to your phone and mains socket. You can also charge your phone via a USB cable. To reduce power consumption and energy waste, when the battery is fully charged, disconnect your charger; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. 1�2�2 Power on your phone Hold down the Power key until the phone powers on. It will take a few seconds before the screen lights up. Set up your phone for the first time The first time you power on the phone, you should set the following options: Language, Date and time, etc. Even if no SIM card is installed, your phone will still power on and you will be able to connect to a Wi-Fi network, set up screen lock and use some of the phone's features. 1�2�3 Power off your phone Hold down the Power key from the Home screen until the phone options appear, select Power off. 89 1�3 Home screen You can move all of the items (applications, shortcuts, folders and widgets) you use most frequently to your Home screen for quick access. Touch the Home key to switch to the Home screen. Touch to enter application list. Status bar • Status/Notification indicators • Touch and drag down to open the notification panel. Touch an icon to open an application, folder, etc. Favorite tray applications • Touch to enter the application. • Long press to move or change applications. Search bar • Touch  to enter text search screen. • Touch  to enter voice search screen. The Home screen is provided in an extended format to allow more space for adding applications, shortcuts etc. Slide the Home screen horizontally left and rig…

Text truncated - open the document above for the full version.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com Date 2015-09-08 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Terminals Test Lab of China Academy of Telecommunication Research of MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

2015-09-11 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJA011 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd. TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Te l : +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com

EUT photograph

EUT Label and Label Location photograph

EUT Interior photograph

©Copyright. All rights reserved by CTTL. FCC PART 15C TEST REPORT No. I15Z41941-SRD02 for TCL Communication Ltd. GSM Quad-band / UMTS Quad-band / LTE Penta-band mobile phone Model Name: 5054A FCC ID: 2ACCJA011 with Hardware Version: LOT1 Software Version: 010 01 Issued Date: 2015-09-15 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected] , website:www.chinattl.com TESTING CNAS L0570 No. I15Z41941-SRD02 Page2 of 89 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Description Issue Date I15Z41941-SRD02 Rev.0 1st edition 2015-09-15 No. I15Z41941-SRD02 Page3 of 89 ©Copyright. All rights reserved by CTTL. CONTENTS 1. TEST LABORATORY ............................................................................................................. 4 1.1. TESTING LOCATION .......................................................................................................... 4 1.1. TESTING ENVIRONMENT .................................................................................................. 4 1.2. PROJECT DATA.................................................................................................................. 4 1.3. SIGNATURE ........................................................................................................................ 4 2. CLIENT INFORMATION .......................................................................................................... 5 2.1. APPLICANT INFORMATION .............................................................................................. 5 2.2. MANUFACTURER INFORMATION ..................................................................................... 5 3. EQUIPMENT UNDERTEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 6 3.1. ABOUT EUT ........................................................................................................................ 6 3.2. INTERNAL IDENTIFICATION OF EUT ............................................................................... 6 3.3. INTERNAL IDENTIFICATION OF AE .................................................................................. 6 3.4. N ORMAL ACCESSORY SETTING ............................................................................................ 7 3.5. G ENERAL DESCRIPTION ...................................................................................................... 7 4. REFERENCE DOCUMENTS .................................................................................................. 7 4.1. DOCUMENTS SUPPLIED BY APPLICANT ........................................................................ 7 4.2. REFERENCE DOCUMENTS FOR TESTING ...................................................................... 7 5. TEST RESULTS ...................................................................................................................... 8 5.1. S UMMARY OF TEST RESULTS .............................................................................................. 8 5.2. S TATEMENTS ...................................................................................................................... 8 6. TEST FACILITIES UTILIZED .................................................................................................. 9 ANNEX A: DETAILED TEST RESULTS ...................................................................................... 10 A.1. MEASUREMENT METHOD ...................................................................................................... 10 A.2. PEAK OUTPUT POWER – CONDUCTED ................................................................................... 11 A.3. FREQUENCY BAND EDGES – CONDUCTED ............................................................................. 12 A.4. CONDUCTED EMISSION......................................................................................................... 19 A.5. RADIATED EMISSION ............................................................................................................. 44 A.6. TIME OF OCCUPANCY (DWELL TIME) ...................................................................................... 63 A.7. 20DB BANDWIDTH ................................................................................................................ 73 A.8. CARRIER FREQUENCY SEPARATION ....................................................................................... 79 A.9. NUMBER OF HOPPING CHANNELS ......................................................................................... 82 A.10. AC POWERLINE CONDUCTED EMISSION .............................................................................. 86 ANNEX B: ACCREDITATION CERTIFICATE .............................................................................. 89 No. I15Z41941-SRD02 Page4 of 89 ©Copyright. All rights reserved by CTTL. 1. Test Laboratory 1.1. Testing Location Location 1:CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China100191 Location 2:CTTL(Shouxiang) Address: No. 51 Shouxiang Science Building, Xueyuan Road, Haidian District, Beijing, P. R. China100191 1.2. Testing Environment Normal Temperature: 15-35°C Extreme Temperature: -10/+55Ԩ Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2015-08-14 Testing End Date: 2015-08-28 1.4. Signature Xu Zhongfei (Prepared this test report) Li Zhibin (Reviewed this test report) Lv Songdong (Approvedthis test report) No. I15Z41941-SRD02 Page5 of 89 ©Copyright. All rights reserved by CTTL. 2. Client Information 2.1. Applicant Information Company Name: TCL …

Text truncated - open the document above for the full version.

FDD ID 2ACCJA011 CE RE Radiated Spurious Emission