2ACCJB004CDMA mobile phone

! ! ! ! ! 1 ! ! HOME F101P ! Quick Start Guide For more information about how to use the device, please go to www.alcatelonetouch.com to download complete user manual English version only).Moreover, from the website you can also consult FAQ, realize software upgrade, etc (English version only). ! ! This product meets applicable national SAR limits of 1.6 W/kg averaged over 1 gram of body tissue. The specific maximum SAR values can be found on page 16 of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 15 mm from the body to ensure compliance with RF exposure requirements. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. ! 2 ! ! 1 Your Device ! ! ! ! ! ! ! ! Left soft key Power on/off key Pick up/Send call End call Call log Navigation key Voice Mail Menu/Confirm an option Right soft key You can access “Settings/Phone settings/Dedicated keys” to customizing the navigation keys. ! ! 3 !    Battery Charger Base (CAB0850009C1) (CBA30Y0AA0C1) (ALCATEL ONE TOUCH CD10) 1.1 Keys Confirm an option (press the middle of the key) Pick up Send a call In idle screen: Access call log (Redial) (press) Switch on/Switch off the telephone (press and hold) End call Return to idle screen Left soft key Right soft key Access your voicemail (press and hold) In Edit mode: - Press once to enter space; Press twice to enter zero In idle screen: - Press to enter zero In Edit mode: - Press: caps lock - Press and hold to access the symbols table In idle screen: - Press and hold to lock the keypad - Press to enter * ! 4 ! In idle screen: - Press: # - Press and hold: activate/deactivate silent mode In Edit mode: - Press to change input method 1.2 Main screen icons (1) Battery ! Call forwarding activated: your calls are forwarded ! Alarm or appointments programmed ! Level of network reception ! Voicemail message received ! Missed calls ! Roaming ! Silence mode: your phone does not ring, beep or vibrate with the exception of the alarm ! SMS unread ! ! ! 5 ! The icons and illustrations in this guide are provided for information (1) purposes only. 2 Getting start.................. 2.1 Set-up Removing and installing the back cover ! Removing and installing the battery ! Inserting and removing the SIM card ! Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press it and slide it out. ! Charging the battery ! 6 ! ! ! ! Connect the battery charger to your phone cradle(or phone) and mains socket respectively. • Charging may take about 20 minutes to start if the battery is flat. • Be careful not to force the plug into the socket. • Make sure the battery is correctly inserted before connecting the charger. • The mains socket must be near to the phone and easily accessible (avoid electric extension cables). • When using your telephone for the first time, charge the battery fully (approximately 3 hours). You are advised to fully charge the battery. • To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; reduce the backlight time, etc. The charge is complete when the animation stops. ! 2.2 Power on your phone Hold down the key until the phone powers on. If the device ask for the lock code, enter the lock code, and select OK. The factory setting for the lock code is 0000. 2.3 Power off your phone Hold down the key until the phone powers off. ! 3 Calls............................... 3.1 Making a call ! 7 ! Dial the desired number then press the key to place the call. If you make a mistake, you can delete the incorrect digits by pressing the right soft key. To hang up the call, press the key. Making an emergency call If your phone is covered by the network, dial emergency number and press the key to make an emergency call. This works even without a SIM card and without typing the PIN code. 3.2 Calling your voicemail (1) To access your voicemail, hold down the key. 3.3 Receiving a call When you receive an incoming call, press the key to talk, and then hang up using the key ! 4 Contacts....................! Your phone features two phonebooks, the SIM phonebook and the smart phonebook which is integrated into the phone memory. 4.1 Consulting your contacts To access the Contacts from the main screen, press the key and select the contact from the list. 4.2 Adding a contact You can add a new contact to phone or SIM card by selecting “Add New”, enter the contact information and then press “save”. 4.3 Searching a contact You can press key to access Contacts list, then enter the first few letters or numbers of the contact name to search. 4.4 Speed Dial Speed Dail allows you to make a call by pressing and holding a number key in the idle screen. To assign a number key for a phone number, select “menu”-> ! 8 ! Contact your network operator to check service availability. (1) ”Contact”->”Speed Dial”. Scroll to the number key(2-9) on the display, and select Add, then select the desire number from the contact list. ! 5 Messages................. !.. 5.1 Create message From the main menu select “Messages” to create text. You can type a message and you can also modify a predefined message in Templates. While writing a message, select “Options” to access all of the messaging options. You can save your messages that you send often to Drafts. Specific letters (accent) will increase the size of the SMS, this may cause multiple SMS to be sent to your recipient. ! 6 Call log................... ! .......... 6.1 Access You can access the function to view up to 20 numbers that you last called or attempted to call or the call you missed by using the following options: • Select “Recent Calls” from main men • Press the send key from Home scree…

Text truncated - open the document above for the full version.

TCL COMMUNICATION Ltd ! Date: 22 December, 2014 ! To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 ! Re: TCL Communication Ltd FCC ID: 2ACCJB004 FCC Part 15&24 Certification Confidentiality Request ! Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. TCL Communication Ltd requests that the following documents regarding this submission for FCC ID: 2ACCJB004 be kept confidential: ! Those documents contain detailed system and equipment description and related information about the product which TCL Communication Ltd considers to be confiden- tial proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, TCL Communication Ltd considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an un- fair advantage in the market. ! ! name/ title Zhizhou Gong company name: TCL Communication Ltd Tel: +86 21 51798260 E-mail: [email protected] Exhibit TypeFile Name Block DiagramBlock Diagram.pdf SchematicsCircuit Diagram.pdf Operational DescriptionOperational description for fcc.pdf Part listBOM.pdf Tune-Up-ProcedureTune up procedure.pdf

            ! " #" $ % & ' ()**& + ,! " #" ! " #" &-.%!   /01   2 ##3 4$5 & & -6$.'77'8-7&'69.:; <.&-.=>?@A BC 0D" EF     G" #### # HHH1 I JKG30L M F  N  I J O E  " P QRSQ TURVWXYVZ [\ =?]>^B<?@>^BC 0 P B_^@>]` abbbb G % ' c '  &  _.]<deCfghhijklmnoip gkqlmrlsq t %'c'u $` ` B@?v6 w %'c'x & -.%c- y c "# %'c'x & -.%8B@_ "t PPz$$.%ayyy 0D"O {J|      J}I J !"#" ~:.c85 y7' 8 - 7&'69.:; <$~=>?@A BC GD"J }IJO€ }IJ | /t#  0#  J }IJ   / !0" 1####

SAR TEST REPORT For LOFT Model Number: F101P FCC ID: 2ACCJB004 Report Number : WT148003750 Test Laboratory : Shenzhen Academy of Metrology and Quality Inspection National Testing Center for Digital Electronic Products Site Location : Bldg. Metrology and Quality Inspection, Longzhu Road, Shenzhen, Guangdong, China Tel : 0086-755-26941599 Fax : 0086-755-26941545 Web : www.smq.com.cn Report No.: WT148003750 Page 2 of 75 Test report declaration Applicant : TCL Communication Ltd. Address : 5F, C-Tower, No. 232, Liang Jing Road,ZhangJiang High-Tech Park, Pudong,Shanghai, China Manufacturer : TCL COMMUNICATION TECHNOLOGY HOLDINGS LIMITED Address : 70 Huifeng 4rd,ZhongKai Hi-tech Development District ,Huizhou,Guangdong 516006 P.R.China（TCL Mobile Communication Co.,LTD.Huizhou） EUT Description : LOFT Model No : F101P Trade mark : : ALCATEL ONETOUCH Marketing name : ALCATEL ONETOUCH HOME F101 FCC ID : : 2ACCJB004 Test Standards: IEEE 1528-2003 FCC KDB 865664 D01 v01r3 The EUT described above is tested by Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory to determine the compliance of the applicable standards stated above. Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory is assumed full responsibility for the accuracy of the test results. The results documented in this report only apply to the tested sample, under the conditions and modes of operation as described herein. The test report shall not be reproduced in part without written approval of the laboratory. Project Engineer: Date: Dec.19.2014 (Liu Zheng) Checked by: Date: Dec.19.2014 (Yang Dongping) Approved by: Date: Dec.19.2014 (Lin Bin) Report No.: WT148003750 Page 3 of 75 Revision History No Date Reason -- 2014-12-19 Initial issue Report No.: WT148003750 Page 4 of 75 TABLE OF CONTENTS TEST REPORT DECLARATION ......................................................................................................... 2 1. REPORTED SAR SUMMARY ................................................................................................. 6 2. GENERAL INFORMATION ...................................................................................................... 7 2.1. Report information .......................................................................................................... 7 2.2. Laboratory Accreditation and Relationship to Customer ......................................... 7 3. DESCRIPTION OF THE DEVICE UNDER TEST（DUT） ............................................... 9 3.1. DUT Description ............................................................................................................. 9 3.2. RF output power Tune up limit ................................................................................... 10 3.3. Applied Standards ........................................................................................................ 11 3.4. SAR Limit ....................................................................................................................... 11 4. TEST CONDITIONS ................................................................................................................ 12 4.1. Temperature and Humidity ......................................................................................... 12 4.2. Introduction of SAR ...................................................................................................... 12 4.3. Test Configuration ........................................................................................................ 12 5. DESCRIPTION OF THE TEST EQUIPMENTS ................................................................. 14 5.1. Measurement System and Components .................................................................. 14 5.2. Isotropic E-field Probe Type EX3DV4 ....................................................................... 15 5.3. Phantoms....................................................................................................................... 15 5.4. Tissue-equivalent Liquids ........................................................................................... 16 5.5. Device Holder ............................................................................................................... 21 5.6. Test Position ................................................................................................................. 21 5.7. Scan Procedures .......................................................................................................... 23 5.8. SAR Averaging Methods ............................................................................................. 23 6. MEASUREMENT UNCERTAINTY ....................................................................................... 24 6.1. Uncertainty for SAR Test ............................................................................................ 24 6.2. Uncertainty for System Validation ............................................................................. 25 7. CONDUCTED TEST RESULTS ........................................................................................... 26 8. SAR TEST RESULTS ............................................................................................................. 27 8.1. CDMA BC1 SAR results .............................................................................................. 27 Report No.: WT148003750 Page 5 of 75 8.2. Repeated SAR results ................................................................................................. 28 9. SIMULTANEOUS TRANSMISSION SAR ANALYSIS ...................................................... 29 APPENDIX A: SYSTEM CHECKING SCANS ............................................................................ 30 APPENDIX B: SYSTEM VALIDATION ........................................................................................ 35 APPENDIX C: MEASUREMENT SCANS .................................................…

Text truncated - open the document above for the full version.

FCC TEST REPORT For LOFT Model Number: F101P FCC ID: 2ACCJB004 Report Number : WT148003752 Test Laboratory : Shenzhen Academy of Metrology and Quality Inspection National Digital Electronic Product Testing Center Site Location : NETC Building, No.4 Tongfa Rd., Xili, Nanshan, Shenzhen, China Tel : 0086-755-86928965 Fax : 0086-755-86009898-31396 Web : www.smq.com.cn E-mail [email protected] Report No.:WT148003752 Page 2 of 31 Test report declaration Applicant : TCT Mobile Limited Address : 5F, C building, No. 232, Liang Jing Road ZhangJiang High-Tech Park, Pudong Area Shanghai, P.R. China. 201203 Manufacturer : TCL COMMUNICATION TECHNOLOGY HOLDINGS LIMITED Address : 70 Huifeng 4rd,ZhongKai Hi-tech Development District , Huizhou,Guangdong 516006 P.R.China （TCL Mobile Communication Co.,LTD.Huizhou） EUT Description : LOFT Model No : F101P Trade mark : ALCATEL ONETOUCH Marketing Name ALCATEL ONETOUCH HOME F101 Serial Number : -- FCC ID : 2ACCJB004 Test Standards: FCC PART 22H AND 24E (2012) The EUT described above is tested by Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory to determine the maximum emissions from the EUT. Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory is assumed full responsibility for the accuracy of the test results. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2003) and the energy emitted by the sample EUT tested as described in this report is in compliance with FCC Rules Part 22H AND 24E. The test report is valid for above tested sample only and shall not be reproduced in part without written approval of the laboratory. Project Engineer: Date: Dec.19 ,2014 (Chen Silin) Checked by: Date: Dec.19 ,2014 (Yang Dongping) Approved by: Date: Dec.19 ,2014 (Peter Lin) Report No.:WT148003752 Page 3 of 31 TABLE OF CONTENTS TEST REPORT DECLARATION........................................................................................................2 1. TEST RESULTS SUMMARY...................................................................................................4 2. GENERAL INFORMATION......................................................................................................5 2.1. Report information..........................................................................................................5 2.2. Laboratory Accreditation and Relationship to Customer.........................................5 2.3. Measurement Uncertainty.............................................................................................6 3. PRODUCT DESCRIPTION.......................................................................................................7 3.1. EUT Description..............................................................................................................7 3.2. Related Submittal(s) / Grant (s)...................................................................................7 3.3. Block Diagram of EUT Configuration..........................................................................8 3.4. Operating Condition of EUT..........................................................................................8 3.5. Support Equipment List.................................................................................................9 3.6. Test Conditions...............................................................................................................9 3.7. Special Accessories.......................................................................................................9 3.8. Equipment Modifications...............................................................................................9 4. TEST EQUIPMENT USED......................................................................................................10 5. TEST RESULTS.......................................................................................................................11 5.1. RF Power Output..........................................................................................................11 5.2. Peak to Average Radio................................................................................................13 5.3. Modulation Characteristics..........................................................................................14 5.4. Occupied Bandwidth/Emission Bandwidth...............................................................15 5.5. Spurious Emission at Antenna Terminal..................................................................18 5.6. Spurious Emissions Radiated....................................................................................27 5.7. Frequency Stability.......................................................................................................30 Report No.:WT148003752 Page 4 of 31 TEST Results SUmmary Table 1 Test Results Summary FCC Measuremen t Specification FCC Limits Part(s) Description Result 2.1046 22.913 24.232 Effective Radiated Power of Transmitter PASS 24.232(d) Peak to Average Ratio PASS 2.1047 / Modulation Characteristics PASS 2.1049 22.917(b) 24.238(b) Occupied Bandwidth PASS 2.1051 22.917 24.238 Spurious Emission at Antenna Terminal PASS 2.1053 22.917 24.238 Radiated Spurious Emissions PASS 2.1055 22.355 24.235 Frequency Stability PASS Remark: “N/A” means “Not applicable.” The tests documented in this report were performed in accordance with TIA-603-C, FCC CFR 47 Part 2, FCC CFR 47 Part 22 Part 24. Report No.:WT148003752 Page 5 of 31 1. GENERAL INFORMATION 1.1. Report information 1.1.1.This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that SMQ approves recommends or endorse…

Text truncated - open the document above for the full version.

EIRP Test Setup FCC Part 22H/24E Radiated Emission below 1GHz ‐ Front ‐Rear FCC Part 22H/24E Radiated Emission above 1GHz ‐Front ‐Rear

Left Cheek position Left Tilted position Right Cheek position Right Cheek position Faceup position 15mm Facedown position 15mm