2ACCJB019GSM Quad Band & UMTS Dual Band Mobile Phone

1 8 2 9 3 10 4 11 5 12 6 13 7 14 English - CJB1CB4ALAAA Quick Start Guide www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found on page 18 of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 1.0 cm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. The mobile phone is in compliance with the requirement of EN 60950-1: 2006 amendment A12: 2011. There will appear a warning box when the volume level is over 4. If the user selects left soft key in the warning box, the volume can be increased and the phone will repeat the acknowledgement more than once every 20h of cumulative listening time. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. 1 Your mobile ������������������� 1 Left soft key 2 Call logs (idle screen) Send call 3 Voice mail (long key-press) 4 Lock Key (long press key) 5 Right soft key 6 Power on/Power off End call 7 Silent mode 8 Navigation key : Music/Confirm an option Increase volume Decrease volume New SMS Alarm 8 1 2 3 4 7 6 5 1�1 Keys Navigation key Confirm an option (press the middle of the key) Send call Access to call log (idle screen) Power on/off the handset (long press) End call Return to idle Left soft key Right soft key From Idle screen - Press: input 1 - Long press: Dial the voice mail number In Edit mode: - Press: Input symbols - Long press: input numbers From Idle screen - Press: enter zero - Long press: input +, "+" are used for dialling an international call. In Edit mode: - Long Press: input 0 (add numbers) From Idle screen - Press: input * - Long press: lock keypad In Edit mode: - Press: change input methods - Long press:change writing language From Idle screen - Press: input # - Long press: activate/deactivate silent mode In Edit mode: - Press: input space - Long press: access the Symbols table 1�2 Idle screen icons Battery charge level. Silent mode: your phone neither rings, beeps nor vibrates. Flight mode. Headset connected. Alarm clock programmed. Missed calls. Level of network reception. Unread SMS / MMS. Message full. Call divert. 2 Getting started ������������ 2�1 Set up Removing and installing the back cover 2036X带摄像头单卡带T卡 Removing and installing the battery 2036X带摄像头单卡带T卡 Inserting and removing TF card 2036X带摄像头单卡带T卡 Removing and inserting the SIM 2036X带摄像头单卡带T卡 First, place the SIM card with the chip facing downwards and put it into the left housing and lock the metal cover. To remove the card, open the metal cover and get it out. Charging the battery Connect the battery charger to your phone and outlet respectively. • The charging may take about 20 minutes to start if the battery is flat. • Be careful not to force the plug into the socket. • Make sure the battery is correctly inserted before connecting the charger. • The outlet must be near to the phone and easily accessible (avoid electric extension cables). • When using your telephone for the first time, charge the battery fully (approximately 3 hours). You are advised to fully charge the battery ( ). • To reduce power consumption and energy waste, when battery is fully charged, disconnect your charger from the plug; reduce the backlight time, etc. The charge is complete when the animation stops. 2�2 Power on your phone Hold down the key until the phone powers on. 2�3 Power off your phone Hold down the key from the idle screen. 3 Calls ������������������������������� 3�1 Making a call Dial the desired number, press the key and choose SIM to place the call. If you make a mistake, you can delete the incorrect digits by pressing the key. To hang up the call, press the key. Making an emergency call If your phone is covered by the network, dial emergency number and press the key to make an emergency call. This works even without a SIM card and without typing the PIN code or unlocking the keypad. 3�2 Calling your Voice mail (1) You can see SIM voice mail in this menu. 3�3 Receiving a call When you receive an incoming call, press the key to talk and then hang up using the key. 3�4 Available functions during the call During a call, you can use your directory, your calendar, text message etc. without hanging up or dropping the call. (1) Contact your network operator to check service availability. 4 FM radio������������������ Your phone is equipped with a radio. You can use the application as a traditional radio with saved channels. In FM radio interface, press to play/pause the playing process of the current channel, press and to tune volume. 5 Call logs ������������������ You can access your SIM call history by pressing from the idle screen, or press the key and select the icon from the menu. In this menu, you will see all call history. 6 Camera ������������������� Your mobile phone is fitted with a camera for taking photos that you can use in different ways: store them in your "phone/MemoryCard". customise your main screen. Make sure that microSD card is well inserted before taking photos. 7 Tools ������������������������ 7�1 Alarm Your mobile phone has a built-in alarm clock with snooze feature. 7�2 Games This function enables you to enjoy simple games. 7�3 Call Filter You can create blacklist/whitelist through this function. 7�4 Internet This function enables you to surf the Internet using the mobile phone. Note: Consulting the local network operator for related fee and specific setup. 7�5 Calculator Press the up, down,left,right and OK key to select +, -, x, /, and = respectively. press left soft key to clear the figure. 7�6 Calendar Once you enter this meun, there is a monthly-view calendar for you to view the date; you can go to any day you want. 7�7 Torch Turn on/off th…

Text truncated - open the document above for the full version.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com 2015-08-21 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJB019 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com Date 2015-08-26 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Terminals Test Lab of China Academy of Telecommunication Research of MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

EUT photograph

DATE VERSION REMARK PDMVPMPSD 2015-06-17 V1.0 Creation 2036A-3*ALEU1 ● CU Label Size: 73*38mm A12036A15XXXXXXXX* XXXX 2036A-3*ALEU1 IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX IMEI:01440700XXXXXXX Carton Label 180*75mm ALCATEL ONETOUCH 2036A VOLCANO BLACK CU xxxxxxxxxxx 20 QUANTITY ALCATEL ONETOUCH 2036A VOLCANO BLACK 2036A-3*ALEU1 IMEI:01440700XXXXXXX Made in China GSM 850/900/1800/1900 MHz UMTS 850/1900 MHz XXXXXXXXXXXXX ● IMEI Label Size: 34*17+26.8*16.7mm 34mm 17.3mm 16.7mm 17mm 43.80mm 26.80mm 01440700XXXXXX ALCATEL ONETOUCH 2036A TCL Communication Ltd. 2036A-3*ALEU1 Made in China FCC ID:2ACCJB019

EUT Interior photograph Mobile Phone Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly

©Copyright. All rights reserved by CTTL. TEST REPORT No. I15Z41694-EMC01 for TCL Communication Ltd. GSM Quad Band & UMTS Dual Band Mobile Phone Model Name: 2036A FCC ID: 2ACCJB019 with Hardware Version: PIO Software Version: V1.1 Issued Date: 2015-07-28 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: FCC 2.948 Listed: No. 525429 CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel: +86(0)10-62304633-2512, Fax: +86(0)10-62304633-2504 Email: [email protected], website: www.chinattl.com No.I15Z41694-EMC01 Page 2 of 19 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Description Issue Date I15Z41694-EMC01 Rev.0 1st edition 2015-7-28 No.I15Z41694-EMC01 Page 3 of 19 ©Copyright. All rights reserved by CTTL. CONTENTS 1. TEST LABORATORY .............................................................................................................. 4 1.1. TESTING LOCATION .......................................................................................................... 4 1.2. TESTING ENVIRONMENT .................................................................................................. 4 1.3. PROJECT DATA .................................................................................................................. 4 1.4. SIGNATURE ........................................................................................................................ 4 2. CLIENT INFORMATION .......................................................................................................... 5 2.1. APPLICANT INFORMATION............................................................................................... 5 2.2. MANUFACTURER INFORMATION ..................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 6 3.1. ABOUT EUT ........................................................................................................................ 6 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ................................... 6 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ...................................... 6 3.4. EUT SET-UPS ..................................................................................................................... 7 4. REFERENCE DOCUMENTS .................................................................................................. 8 4.1. REFERENCE DOCUMENTS FOR TESTING ...................................................................... 8 5. LABORATORY ENVIRONMENT ............................................................................................ 9 6. SUMMARY OF TEST RESULTS ........................................................................................... 10 7. TEST EQUIPMENTS UTILIZED ............................................................................................ 11 ANNEX A: MEASUREMENT RESULTS ...................................................................................... 12 No.I15Z41694-EMC01 Page 4 of 19 ©Copyright. All rights reserved by CTTL. 1. Test Laboratory 1.1. Testing Location Location 1: CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2015-07-07 Testing End Date: 2015-07-13 1.4. Signature Wang Junqing (Prepared this test report) Qu Pengfei (Reviewed this test report) Liu Baodian Deputy Director of the laboratory (Approved this test report) No.I15Z41694-EMC01 Page 5 of 19 ©Copyright. All rights reserved by CTTL. 2. Client Information 2.1. Applicant Information Company Name: TCL Communication Ltd. Address /Post: 5F, C-Tower, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Area,Shanghai,201203,P.R.China City: Shanghai Postal Code: 201203 Country: China Contact Person: Tiffany.Tang Contact Email [email protected] Telephone: 0086- (0)21 51798260 Fax: 0086-(0)21 6146 0600 2.2. Manufacturer Information Company Name: TCL Communication Ltd. Address /Post: 5F, C-Tower, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Area,Shanghai,201203,P.R.China City: Shanghai Postal Code: 201203 Country: China Contact Person: Tiffany.Tang Contact Email [email protected] Telephone: 0086- (0)21 51798260 Fax: 0086-(0)21 6146 0600 No.I15Z41694-EMC01 Page 6 of 19 ©Copyright. All rights reserved by CTTL. 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT Description GSM Quad Band & UMTS Dual Band Mobile Phone Model Name 2036A FCC ID 2ACCJB019 Extreme vol. Limits 3.5VDC to 4.2VDC (nominal: 3.7VDC) Note: Components list, please refer to documents of the manufacturer; it is also included in the original test record of Telecommunication Metrology Center of MIIT of People’s Republic of China. 3.2. Internal Identification of EUT used during the test EUT ID* SN or IMEI HW Version SW Version EUT1 014407000001066 PIO V1.1 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description SN Remarks AE1 Battery / / AE2 Battery / 1541694BA012 AE3 Travel charger / 1541694CH004 AE4 USB cable / 1541694DC005 AE1 Model CAB22D0000C1 Manufacturer BYD Capacitance 650mAh Nominal voltage 3.7V AE2 Model CAB22B0000C1 Manufacturer BYD Capacitance 750mAh Nominal voltage 3.7V No.I15Z41694-EMC01 Page 7 of 19 ©Copyright. All rights reserved by CTTL. AE3 Model CBA0053AG0C4 Manufacturer AOHAI Length of cable 120cm AE4 Model CDA0000030C3 Manufacturer JIAYIKANG Length of cable 90cm *AE ID: is used to identify the test sample in the lab internally. 3.4…

Text truncated - open the document above for the full version.

FDD CE D ID 2ACCJJH020 RE Rad diated Spurrious Emisssion