2ACCJB029BigPad

Thank you for buying TCL Xess BigPad（hereinafter referred to as Xess）. We hope you will enjoy your high-quality BigPad experience. For more information about how to use your BigPad, please visit www.tcl-xess.com to download the complete user manual. From the website, you can consult the FAQ, perform software upgrades, etc. English Version CJB1234567789AAA 1.Cognize your Xess Power key Press: Lock the screen/Light up the screen. Press and hold: Power on /Show the pop-up menu to select from Power off/Reboot/Airplane mode. Press the Power key for more than 10s to restart. Press the Power key and Volume up key to enter recovery mode. Volume key Press Volume key for adjusts volume. Press the Power key and Volume down key for 1s to capture a screenshot. 1.1Handle &Stand Stand can pull out along the arrow direction，support 30 degree to 75 degrees. Handle can pull up along with thec For carrying the BigPad, and support Hanging onto the wall. If you use Bigpad at 30 degrees, Do not use your body to bend down, or your BigPad will be damaged. Do not flip out handle, otherwise your BigPad will be damaged. Reminder： 1.2 IO port Press inward along with the arrow direction, you can see IO port , including USB*2,earphone*1;IO port will hide if you press again. 2.Getting started 2.1Charging the battery Connect adaptor to power line. Connect adaptor MagTouch port to BigPad charging port. Connect the MagTouch port to your BigPad and wall socket respectively; the LED indicator will light while charging. To reduce power consumption and energy waste, when the battery is fully charged, disconnect your charger; switch off Wi-Fi, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. Reminder： 2.2 Power on your BigPad Hold down the Power key until the BigPad powers on. It will take a few seconds before the screen lights up. Set up your BigPad for the first time: The first time you power on the BigPad, you should set the following options: Input method, Google account, Location, etc. Power off your BigPad： Hold down the Power key from the Home screen until the BigPad options appear, select Power off. 2.3 Installing or removing the microSD card 1) To install microSD card, start by takeout niddle pin from user manual box. 2) Use niddle pin to open card tray. 3) Place the microSD card into the slot. To avoid data loss and SD card damage, before removing the SD card, please ensure that the SD card is unmounted (Settings\Storage\Unmount SD card). Reminder： 3.Personalize your Xess 3.1 Home screen The Home screen is provide in an extended format to allow more space for adding all of items(applications, shortcuts and widgets) you use most frequently in for quick access. Slide the Home screen horizontally left and right to get a complete view. 3.2 Use the touchscreen Touch【icon】 To access an application, touch it with your finger. Touch and hold【icon】 Touch and hold the item to enter the available options. Drag【icon】 Place your finger on the screen to drag an object to another location. Swipe/Slide【icon】 Swipe the screen at desktop to view more objects in your Xess. Silde the screen up and down to scroll through the applications, images, web pages, etc. Pinch/Spread【icon】 Place your fingers of one hand on the screen surface and zoom in/out the pictures or pages. 3.3 Status bar and Quick setting panel From the status bar, you can view both Xess status (on the right side of the home screen) and do quick settings by Quick setting bar(on the middle-top of the home screen). Status icons Quick setting panel Slide from the middle-top of home screen to open quick setting panel. Left part of the panel is quick setting area, by touching the icons you can enable or disable according functions or adjust volume/backlight. Middle part of the panel is an clock (or other dedicated) widgets. Right part of the panel is system notification bar. 3.4 Lock/Unlock your screen To protect your Xess and privacy, you can lock and power off the screen by short press the power key at back side of Xess, a variety of unlock methods such as Swipe/Patten/PIN/Password also can be find in path setting->security->screen lock. 3.5 Volume adjustment You can set the media, ringtone, notification volumes by press the volume up/down key at back side of Xess. 4.Making the most of your Xess 4.1 Text input Touch Settings\Language & input, touch the keyboard you want to setup and a series of settings will become available for your selection. Onscreen Keyboard settings Turn the phone sideways or upright to adjust the Onscreen Keyboard orientation. You can also adjust it by changing the settings (Touch Settings\Display\Auto-rotate screen). 4.2 E-mail Besides your Gmail account, you can also set-up external POP3 or IMAP email accounts in your phone. To access this feature, touch the Application tab from the Home screen, then select Email. An email setup wizard will guide you through the steps to set-up an email account.  Enter the email address and password of the account you want to set-up.  Touch[icon] ,If the account you entered is not provided by your service provider in the phone, you will be prompted to go to the email account settings screen to enter settings manually. Alternatively, you can touch MANUAL SETUP to directly enter the incoming and outgoing settings for the email account you are setting up.  Enter the account name and display name in outgoing emails.  To add another email account, you can touch the icon and Settings. Touch Add account to create.  Touch the icon from the Inbox screen.  Enter recipient(s) email address (es) in the To field. To create and send emails 4.3 Getting connected 4.3.1 Wi-Fi Touch Settings\Wi-Fi. Touch the switch to turn on/off Wi-Fi. The detailed information of detected Wi-Fi networks is displayed in the Wi-Fi networks section. Touch a Wi-Fi network to connect. If the network you selected is secured, you are required to enter a password or other credentials (you can contact the…

Text truncated - open the document above for the full version.

Date: November 17, 2015 We, TCL Communication Ltd. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2ACCJB029 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ----------------------------------- Zhizhou GONG Product Certification Manager TCL Communication Ltd.


  











        


 

 





 


 
!    !"#$%#" " & #"' "( )*)+#), - .(%& -+$ / 




"#

""
 
"

0
$$"
#
%$ 
!
"

#
""
 
"


 &

'

""




       !"# $ % & -


"#
""
(

 
##


#

 &




#

(

%


!
$"
)



&



*"








+!
, - .,

/
#
0 

1
  
1&

      


         
      
 !"# $"# %& & '()**! +,-!& & !!& *,. **!+/           ! "    "



+& !!**,&  !& ,*+!"*+!!& & . +& **!*0+!& *"
**!*("# $)! **!!!& *,.!& / +& + 1 **!"
!,,)     21 3 41   !!5 .  6& & !6" 

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14

Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 30 Report No. : SA150910D02 Issued Date : Oct. 26, 2015 FCC SAR Test Report Report No. : SA150910D02 Applicant : TCL communication Ltd Address : 5F, C-Tower, No.232, Liangjing Road, Zhangjiang High-tech Park, Pudong Shanghai China Product : BigPad FCC ID : 2ACCJB029 Brand : ALCATEL onetouch Model No. : P17AA Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE Std 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r01 KDB 248227 D01 v02r01 / KDB 447498 D01 v05r02 / KDB 616217 D04 v01r01 Sample Received Date : Sep. 10, 2015 Date of Testing : Sep. 24, 2015 ~ Sep. 30, 2015 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Assistant Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 30 Report No. : SA150910D02 Issued Date : Oct. 26, 2015 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure ................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation .........................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150910D02-3 Page No. 1 / 47 Report Format Version: 6.1.1 FCC Test Report (BT EDR) Report No.: RF150910D02-3 FCC ID: 2ACCJB029 Test Model: P17AA Received Date: Sep. 10, 2015 Test Date: Sep. 24 ~ Oct. 15, 2015 Issued Date: Oct. 20, 2015 Applicant: TCL communication Ltd Address: 5F, C-Tower, No.232, Liangjing Road, Zhangjiang High-tech Park, Pudong Shanghai China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150910D02-3 Page No. 2 / 47 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 8 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 Description of Support Units ..........................................................................................................11 3.3.1 Configuration of System under Test .............................................................................................. 12 3.4 General Description of Applied Standards ..................................................................................... 14 4 Test Types and Results.................................................................................................................. 15 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 15 4.1.2 Test Instruments ........................................................................................................................... 16 4.1.3 Test Procedures ........................................................................................................................... 17 4.1.4 Deviation from Test Standard ........................................................................................................ 17 4.1.5 Test Set Up................................................................................................................................... 18 4.1.6 EUT Operating Conditions ............................................................................................................ 18 4.1.7 Test Results .................................................................................................................................. 19 4.2 Conducted Emission Measurement .............................................................................................. 26 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 26 4.2.2 Test Instruments ........................................................................................................................... 26 4.2.3 Test Procedures ........................................................................................................................... 27 4.2.4 Deviation from Test Standard ........................................................................................................ 27 4.2.5 Test Setup .................................................................................................................................... 27 4.2.6 EUT Operating Conditions ...................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150910D02-4 Page No. 1 / 36 Report Format Version: 6.1.1 FCC Test Report (BT LE) Report No.: RF150910D02-4 FCC ID: 2ACCJB029 Test Model: P17AA Received Date: Sep. 10, 2015 Test Date: Sep. 24 ~ Oct. 15, 2015 Issued Date: Oct. 20, 2015 Applicant: TCL communication Ltd Address: 5F, C-Tower, No.232, Liangjing Road, Zhangjiang High-tech Park, Pudong Shanghai China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150910D02-4 Page No. 2 / 36 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 4 1 Certificate of Conformity ................................................................................................................. 5 2 Summary of Test Results ................................................................................................................ 6 2.1 Measurement Uncertainty............................................................................................................... 6 2.2 Modification Record........................................................................................................................ 6 3 General Information ......................................................................................................................... 7 3.1 General Description of EUT ............................................................................................................ 7 3.2 Description of Test Modes .............................................................................................................. 8 3.2.1 Test Mode Applicability and Tested Channel Detail .......................................................................... 9 3.3 Duty cycle of test signal ................................................................................................................ 10 3.4 Description of Support Units ..........................................................................................................11 3.4.1 Configuration of System under Test .............................................................................................. 12 3.5 General Description of Applied Standards ..................................................................................... 14 4 Test Types and Results.................................................................................................................. 15 4.1 Radiated Emission and Bandedge Measurement.......................................................................... 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement ............................................................ 15 4.1.2 Test Instruments ........................................................................................................................... 16 4.1.3 Test Procedures ........................................................................................................................... 17 4.1.4 Deviation from Test Standard ........................................................................................................ 17 4.1.5 Test Set Up................................................................................................................................... 18 4.1.6 EUT Operating Conditions ............................................................................................................ 18 4.1.7 Test Results .................................................................................................................................. 19 4.2 Conducted Emission Measurement .............................................................................................. 23 4.2.1 Limits of Conducted Emission Measurement ................................................................................. 23 4.2.2 Test Instruments ........................................................................................................................... 23 4.2.3 Test Procedures ........................................................................................................................... 24 4.2.4 Deviation from Test Standard ........................................................................................................ 24 4.2.5 TEST SETUP .........................................................................................................…

Text truncated - open the document above for the full version.

Report No.: RF150910D02-2 Page No. 1 / 25 Report Format Version: 6.1.1 DFS Test Report Report No.: RF150910D02-2 FCC ID: 2ACCJB029 Test Model: P17AA Received Date: Sep. 10, 2015 Test Date: Oct. 22, 2015 Issued Date: Oct. 22, 2015 Applicant: TCL communication Ltd Address: 5F, C-Tower, No.232, Liangjing Road, Zhangjiang High-tech Park, Pudong Shanghai China Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF150910D02-2 Page No. 2 / 25 Report Format Version: 6.1.1 Table of Contents Release Control Record ............................................................................................................................. 3 1 Certificate of Conformity ................................................................................................................. 4 2 EUT Information ............................................................................................................................... 5 2.1 Operating Frequency Bands and Mode of EUT ............................................................................... 5 2.2 EUT Software and Firmware Version .............................................................................................. 5 2.3 Description Of Available Antennas to The EUT ............................................................................... 5 2.4 EUT Maximum Conducted Power ................................................................................................... 6 2.5 EUT Maximum E.I.R.P. Power ........................................................................................................ 7 2.6 Transmit Power Control (TPc) ........................................................................................................ 8 2.7 Statement of Maunfacturer ............................................................................................................. 8 3. U-NII DFS Rule Requirements .................…

Text truncated - open the document above for the full version.