2ACCJB221Tablet PC

021423-17 rev 4 Certification Application Attestation Statements Date: June 5, 2024 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: FCC ID: 2ACCJB221 Statement for 47 CFR section 2.911(d)(5)(i) _TCL Communication Ltd._ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) __TCL Communication Ltd.__ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☑- is not identified on the Covered List as an entity producing “covered” equipment. Thank you, By: __________________________ _Ting Wang__ (Signature 2 ) (Print name) Title: __Product Certification Manager_ Company: ____ TCL Communication Ltd._ Telephone: __+867522639091____ 1 ‐ The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead. 021423-17 rev 4

TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: TCT Mobile (US) Inc. Contact Name: Yao Dai Street Address: 189 Technology Drive City/Province/Zip: Irvine, CA 92618 Telephone No: 1-855-368-0829 Email: [email protected] FRN #: 0033429465 This letter is to confirm that we (the “Designated U.S. Agent”) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 C.F.R. § 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: May 23, 2024 Signed by (Printed Name/Title): Yao Dai / Technical Acceptance Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: TCL Communication Ltd. Grantee Code: 2ACCJ FRN: 0031833205 Contact Name: Wang Ting Street Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong City/Province/Zip: Hongkong Telephone No: +86 13502294537 Email: [email protected] Applicant Signature: Date: 2024-05-23 Signed by (Printed Name/Title): Wang Ting / Product Certification Manager DocuSign Envelope ID: 10D7245A-8E17-445F-AFFF-51B95A1D4A93

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: +86 755 3664 5759 Fax: +86 755 3661 2000-81722 http://tclcom.tcl.com 2024-06-05 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJB221 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Ting Wang Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: +86 755 3664 5759 Fax: +86 755 3661 2000-81722 http://tclcom.tcl.com 2024-06-05 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: SHORT-TERM Confidentiality request for FCC ID: 2ACCJB221 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 180 days: - External Photos - Internal Photos - Test Setup Photos - User manual The applicant also acknowledges that they will also provide appropriate notice to ACB should either of the following occur: a) if the applicant requires additional 45 days extension periods they will notify ACB with a new request letter at least 7 days prior to the short-term confidentiality expiration date – [Note: up to a maximum of 3 extensions only are allowed], or b) Immediately notify ACB in the event the information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Yours Sincerely, Ting Wang Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong Tel: 0086-755-36611722; Fax: 0086-755-36612000-81722 Statement We, TCL Communication Ltd., states that our device with FCC ID: 2ACCJB221 is a multi-band tablet which supports 2.4 GHz Wi-Fi 11b, 11g, 11n-20M/11n-40M, 5GHz Wi-Fi 11a/11n-HT20/11n-HT40, 11ac-HT20/11ac-HT40/11ac-HT80 for connectivity functions Contact Person: Ting Wang E-mail: [email protected]

字符镭雕黑色 Hera Back cover marking V2.0a Jan 17.2024 17.61 mm 3 8 . 8 2 m m 1/5 label area 50X40mm 1 4 . 5 m m 14.5 mm

9491G-FCC Label 9491G E-label

©Copyright. All rights reserved by CTTL. SAR TEST REPORT No. 24T04Z101045-002 For TCL Communication Ltd. Tablet PC Model Name: 9491G with Hardware Version: 05 Software Version: 1AS0 FCC ID: 2ACCJB221 Issued Date: 2024-06-02 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL Test Laboratory: CTTL-Telecommunication Technology Labs, CAICT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504 Email: [email protected], website: www.caict.ac.cn No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 2 of 75 REPORT HISTORY Report Number Revision Issue Date Description 24T04Z101045-002 Rev.0 2024-06-02 Initial creation of test report No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 3 of 75 TABLE OF CONTENT 1 TEST LABORATORY ................................................................................................................. 5 2 STATEMENT OF COMPLIANCE ................................................................................................ 6 3 CLIENT INFORMATION.............................................................................................................. 7 3.1 APPLICANT INFORMATION .............................................................................................................................. 7 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 7 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................ 8 4.1 ABOUT EUT ................................................................................................................................................... 8 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 8 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................ 8 5 TEST METHODOLOGY .............................................................................................................. 9 5.1 APPLICABLE LIMIT REGULATIONS .................................................................................................................. 9 5.2 APPLICABLE MEASUREMENT STANDARDS ..................................................................................................... 9 6 SPECIFIC ABSORPTION RATE (SAR) .................................................................................... 10 6.1 INTRODUCTION ............................................................................................................................................. 10 6.2 SAR DEFINITION .......................................................................................................................................... 10 7 TISSUE SIMULATING LIQUIDS ............................................................................................... 11 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 11 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 11 8 SYSTEM VERIFICATION .......................................................................................................... 12 8.1 SYSTEM SETUP ............................................................................................................................................. 12 8.2 SYSTEM VERIFICATION ................................................................................................................................. 13 9 MEASUREMENT PROCEDURES ............................................................................................ 14 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 14 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 16 9.3 BLUETOOTH & WI-FI MEASUREMENT PROCEDURES FOR SAR .................................................................... 17 9.4 POWER DRIFT ............................................................................................................................................... 17 10 CONDUCTED OUTPUT POWER ........................................................................................... 18 11 ANTENNA LOCATION ............................................................................................................ 21 11.1 TRANSMIT ANTENNA SEPARATION DISTANCES ........................................................................................... 21 11.2 SAR MEASUREMENT POSITIONS ................................................................................................................ 21 12 SAR TEST RESULT ................................................................................................................ 22 13 SAR MEASUREMENT VARIABILITY ..................................................................................... 24 14 EVALUATION OF SIMULTANEOUS ....................................................................................... 25 14.1 INTRODUCTION ........................................................................................................................................... 25 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 4 of 75 14.2 SIMULTANEOUS TRANSMISSION CAPABILITIES ........................................................................................... 26 14.3 SAR SIMULTANEOUS TRANSMISSION ANALYSIS ...............................................…

Text truncated - open the document above for the full version.

No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 39 of 75 C.4.2 Robot The SPEAG DASY system uses the high precision robots (DASY5: RX160L) type from Stäubli SA (France). For the 6-axis controller system, the robot controller version from Stäubli is used. The Stäubli robot series have many features that are important for our application: ➢ High precision (repeatability 0.02mm) ➢ High reliability (industrial design) ➢ Low maintenance costs (virtually maintenance free due to direct drive gears; no belt drives) ➢ Jerk-free straight movements (brushless synchron motors; no stepper motors) ➢ Low ELF interference (motor control fields shielded via the closed metallic construction shields) Picture C.5 DASY 5 C.4.3 Measurement Server The Measurement server is based on a PC/104 CPU broad with CPU (DASY5: 400 MHz, Intel Celeron), chipdisk (DASY5: 128MB), RAM DASY5: 128MB). The necessary circuits for communication with the DAE electronic box, as well as the 16 bit AD converter system for optical detection and digital I/O interface are contained on the DASY I/O broad, which is directly connected to the PC/104 bus of the CPU broad. The measurement server performs all real-time data evaluation of field measurements and surface detection, controls robot movements and handles safety operation. The PC operating system cannot interfere with these time critical processes. All connections are supervised by a watchdog, and disconnection of any of the cables to the measurement server will automatically disarm the robot and disable all program-controlled robot movements. Furthermore, the measurement server is equipped with an expansion port which is reserved for future applications. Please note that this expansion port does not have a standardized pinout, and therefore only devices provided by SPEAG can be connected. Devices from any other supplier could seriously damage the measurement server. Picture C.6 Server for DASY 5 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 40 of 75 C.4.4 Device Holder for Phantom The SAR in the phantom is approximately inversely proportional to the square of the distance between the source and the liquid surface. For a source at 5mm distance, a positioning uncertainty of ±0.5mm would produce a SAR uncertainty of ±20%. Accurate device positioning is therefore crucial for accurate and repeatable measurements. The positions in which the devices must be measured are defined by the standards. The DASY device holder is designed to cope with the different positions given in the standard. It has two scales for device rotation (with respect to the body axis) and device inclination (with respect to the line between the ear reference points). The rotation centers for both scales are the ear reference point (ERP). Thus the device needs no repositioning when changing the angles. The DASY device holder is constructed of low-loss POM material having the following dielectric parameters: relative permittivity  =3 and loss tangent  =0.02. The amount of dielectric material has been reduced in the closest vicinity of the device, since measurements have suggested that the influence of the clamp on the test results could thus be lowered. <Laptop Extension Kit> The extension is lightweight and made of POM, acrylic glass and foam. It fits easily on the upper part of the Mounting Device in place of the phone positioner. The extension is fully compatible with the Twin-SAM and ELI phantoms. Picture C7-1: Device Holder Picture C.7-2: Laptop Extension Kit C.4.5 Phantom The SAM Twin Phantom V4.0 is constructed of a fiberglass shell integrated in a table. The shape of the shell is based on data from an anatomical study designed to Represent the 90 th percentile of the population. The phantom enables the dissymmetric evaluation of SAR for both left and right handed handset usage, as well as body-worn usage using the flat phantom region. Reference markings on the Phantom allow the complete setup of all predefined phantom positions and measurement grids by manually teaching three points in the robot. The shell phantom has a 2mm shell thickness (except the ear region where shell thickness increases to 6 mm). Shell Thickness: 2±0. 2 mm Filling Volume: Approx. 25 liters Dimensions: 810 x l000 x 500 mm (H x L x W) Available: Special No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 41 of 75 Picture C.8: SAM Twin Phantom No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 42 of 75 ANNEX D Position of the wireless device in relation to the phantom D.1 Body-worn device A typical example of a body-worn device is a mobile phone, wireless enabled PDA or other battery operated wireless device with the ability to transmit while mounted on a person’s body using a carry accessory approved by the wireless device manufacturer. Picture D.1 Test positions for body-worn devices D.2 Desktop device A typical example of a desktop device is a wireless enabled desktop computer placed on a table or desk when used. The DUT shall be positioned at the distance and in the orientation to the phantom that corresponds to the intended use as specified by the manufacturer in the user instructions. For devices that employ an external antenna with variable positions, tests shall be performed for all antenna positions specified. Picture8.5 show positions for desktop device SAR tests. If the intended use is not specified, the device shall be tested directly against the flat phantom. No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 43 of 75 Picture D.2 Test positions for desktop devices D.3 DUT Setup Photos Picture D.3 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 44 of 75 ANNEX E Equivalent Media Recipes The liquid used for the frequency range of 800-3000 MHz consisted of water, sugar, salt, preventol, glycol monobutyl and Cellulose. The liquid has been previously proven to be suited for worst-case. The Table E.1 shows the detail solution. It’s sat…

Text truncated - open the document above for the full version.

No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 58 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 59 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 60 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 61 of 75 5 GHz Dipole Calibration Certificate No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 62 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 63 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 64 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 65 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 66 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 67 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 68 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 69 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 70 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 71 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 72 of 75 No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 73 of 75 ANNEX I Sensor Triggering Data Summary The DUT has the proximity sensors to reduce the output power. The position of the sensor and antenna are as shown in the graphic. ANT P-Sensor Detect Triggering distances WIFI5G ANT Rear 18 mm According to the above description, this device was tested to check the SAR sensor triggering distances for the left edge of the device. The measured power state within ±5mm of the triggering points (or until touching the phantom) is included for each applicable edge. To ensure all production units are compliant it is necessary to test SAR at a distance 1mm less than the smallest distance from the device and SAR phantom with the device at maximum output power without power reduction. We monitor power changes with software built in the EUT and got the different proximity sensor triggering distances for rear edge. The manufacturer has declared 18mm for Rear edge of WIFI 5G antenna. Therefore, based on the most conservative triggering distances as above, additional SAR measurements were required at 17mm for rear edge of WIFI5G antenna. WLAN5G antenna Rear of WLAN antenna Moving device toward the phantom: The power state Distance [mm] 23 22 21 20 19 18 17 16 15 14 13 Main antenna Normal Normal Normal Normal Low Low Low Low Low Low Low Moving device away from the phantom: The power state Distance [mm] 13 14 15 16 17 18 19 20 21 22 23 Main antenna Low Low Low Low Low Low Low Normal Normal Normal Normal No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 74 of 75 The influence of table tilt angles to proximity sensor triggering is determined by positioning each edge that contains a transmitting antenna, perpendicular to the flat phantom, at the smallest sensor triggering test distance by rotating the device around the edge next to the phantom in ≤ 10° increments until the tablet is ±45° or more from the vertical position at 0°. The Rear edge evaluation Based on the above evaluation, we come to the conclusion that the sensor triggering is not released and normal maximum output power is not restored within the ±45°range at the smallest sensor triggering test distance declared by manufacturer. No.24T04Z101045-002 ©Copyright. All rights reserved by CTTL. Page 75 of 75 ANNEX J Accreditation Certificate

Shenzhen Etheta Communicate Ltd. （Shenzhen R&D） Customer：TCL Communication Ltd. Project name：Hera Product name：Hera antenna Material： Wifi 5G：FPC WIFI 2.4G：Steel sheet Date：2024.6.4 Test system introduction: S11: 1、2.4G WIFI 2、WiFi 5G+GPS Effi，Gain: 1、2.4G WIFI Frequency （MHz） Efficiency （%） Efficiency （dB） Peak Gain 2410 23.5 -6.3 -0.5 2420 23.7 -6.3 -0.3 2430 24.9 -6.0 -0.1 2440 25.9 -5.9 0.1 2450 27.0 -5.7 0.2 2460 29.2 -5.4 0.2 2470 26.5 -5.8 0.1 2480 25.9 -5.9 -0.1 2490 25.6 -5.9 -0.1 2500 26.8 -5.7 0.1 2、WiFi 5G+GPS 3D Pattern: 1、2.4G WIFI Frequency=2450MHz: Frequency （MHz） Efficiency （%） Efficiency （dB） Peak Gain 1550 10.2 -9.9 ‐4.6 1560 10.5 -9.8 ‐4.4 1570 10.6 -9.8 ‐4.4 1575 10.6 -9.8 ‐4.2 1580 10.4 -9.8 ‐4.1 1590 10.0 -10.0 ‐4.4 1600 9.4 -10.3 ‐4.2 5150 20.9 -6.8 0.6 5200 20.9 -6.8 0.4 5250 21.1 -6.8 0.2 5300 19.9 -7.0 0.2 5350 20.5 -6.9 0.1 5400 17.5 -7.6 0.1 5450 17.8 -7.5 0.1 5500 17.6 -7.5 0.3 5550 17.6 -7.5 0.3 5600 17.5 -7.6 0.4 5650 17.8 -7.5 0.5 5700 16.6 -7.8 0.6 5750 20.6 -6.9 0.8 5800 21.8 -6.6 0.7 5850 22.5 -6.5 0.7 2、WiFi 5G+GPS Frequency=5500MHz

©Copyright. All rights reserved by CTTL. FCC PART 15C TEST REPORT No.24T04Z101045-008 for TCL Communication Ltd. Tablet PC Model Name: 9491G FCC ID:2ACCJB221 with Hardware Version:05 Software Version:1AS0 Issued Date: 2024-5-30 Note: The test results in this test report relate only to the devices specified in this report.This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, CAICT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected], website:www.chinattl.com No.24T04Z101045-008 ©Copyright. All rights reserved by CTTL. Page 2 of 91. REPORT HISTORY Report Number Revision Description Issue Date 24T04Z101045-008 Rev.0 1 st edition 2024-5-30 Note: the latest revision of the test report supersedes all previous version. No.24T04Z101045-008 ©Copyright. All rights reserved by CTTL. Page 3 of 91. CONTENTS 1. Test Laboratory ....................................................................................................................................... 5 1.1. Introduction &Accreditation ....................................................................................................... 5 1.2. Testing Location .......................................................................................................................... 5 1.3. Testing Environment ................................................................................................................... 6 1.4. Project data.................................................................................................................................. 6 1.5. Signature ..................................................................................................................................... 6 2. Client Information ................................................................................................................................... 7 2.1. Applicant Information ................................................................................................................. 7 2.2. Manufacturer Information ........................................................................................................... 7 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) ............................................................... 8 3.1. About EUT .................................................................................................................................. 8 3.2. Internal Identification of EUT ..................................................................................................... 8 3.3. Internal Identification of AE ....................................................................................................... 8 3.4. Normal Accessory setting ........................................................................................................... 8 3.5. General Description .................................................................................................................... 8 4. Reference Documents ............................................................................................................................. 9 4.1. Documents supplied by applicant ............................................................................................... 9 4.2. Reference Documents for testing ................................................................................................ 9 5. Test Results ........................................................................................................................................... 10 5.1. Summary of Test Results .......................................................................................................... 10 5.2. Statements ................................................................................................................................. 10 6. Test Facilities Utilized ...........................................................................................................................11 7. Measurement Uncertainty ..................................................................................................................... 12 7.1. Peak Output Power - Conducted ............................................................................................... 12 7.2. Frequency Band Edges - Conducted ......................................................................................... 12 7.3. Transmitter Spurious Emission - Conducted ............................................................................ 12 7.4. Transmitter Spurious Emission - Radiated ................................................................................ 12 7.5. Time of Occupancy (Dwell Time) ............................................................................................ 12 7.6. 20dB Bandwidth ....................................................................................................................... 12 7.7. Carrier Frequency Separation ................................................................................................... 13 7.8. AC Powerline Conducted Emission .......................................................................................... 13 ANNEX A: EUT parameters......................................................................................................................... 14 ANNEX B: Detailed Test Results ................................................................................................................. 15 B.1. Measurement Method .................................................................................................................... 15 B.2. Peak Output Power ........................................................................................................................ 16 B.3. Fr…

Text truncated - open the document above for the full version.

No.24T04Z101045-008 ©Copyright. All rights reserved by CTTL. Page 47 of 91. Fig.52. Conducted spurious emission: 8DPSK, Channel 39, 10GHz – 26GHz Fig.53. Conducted spurious emission: 8DPSK, Channel 78, 2480MHz No.24T04Z101045-008 ©Copyright. All rights reserved by CTTL. Page 48 of 91. Fig.54. Conducted spurious emission: 8DPSK, Channel 78, 30MHz - 1GHz Fig.55. Conducted spurious emission: 8DPSK, Channel 78, 1GHz - 3GHz No.24T04Z101045-008 ©Copyright. All rights reserved by CTTL. Page 49 of 91. Fig.56. Conducted spurious emission: 8DPSK, Channel 78, 3GHz - 10GHz Fig.57. Conducted spurious emission: 8DPSK, Channel 78, 10GHz - 26GHz No.24T04Z101045-008 ©Copyright. All rights reserved by CTTL. Page 50 of 91. B.5. Radiated Unwanted Emission Limits Measurement Limit Standard Limit FCC 47 CFR Part 15.247, 15.205, 15.209 20dB below peak output power In addition, radiated emissions which fall in the restricted bands, as defined in § 15.205(a), must also comply with the radiated emission limits specifie…

Text truncated - open the document above for the full version.