2ACCJH016HSUPA/HSDPA/UMTS Tri-band/GSM Quad-band mobile phone

12 English - CJB2895ALAAA Quick Start Guide For more information about how to use the phone, please go to www.alcatelonetouch.us to download the complete user manual. From the website you can also consult the FAQ, upgrade software, etc. www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the RADIOWAVES section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. 1 Your mobile .................. 1.1 Keys and connectors Headset connector Micro-USB connector Back key Home key Menu key Touch screen Front Camera 28A 28E 34 Volume up Volume down Camera Flash/Flashlight Power key Menu key • Option menu. Touch to access Manage Home screen, Add widgets, Manage applications, Wallpaper and Settings. • Recent apps. Touch and hold to open a list of thumbnail images of apps you've worked with recently. Touch it to open an app. Swipe it up or down to remove a thumbnail from the list. Home key • While on any application or screen, touch to return to the Home screen. Back key • Touch to go back to the previous screen, to close a dialog box, options menu, the notification panel, etc. Power key • Press: Lock the screen/Light up the screen. • Press and hold: Power on or generate a pop up menu selecting from Power off/Restart/Airplane mode or icons of Ringer mode icons. • Press to mute the ringtone when there’s an incoming call. • Press and hold for more than 10 seconds to restart the phone if it has become unresponsive. • Press and hold the Power key and Volume down key to capture a screenshot. • Press and hold the Power key and Volume up key under power off mode to restore factory settings. Volume keys • Under call mode, adjust the earpiece or headset volume. • In Music/Video/Streaming mode, adjust the media volume. • In general mode, adjust the ringtone volume. • Mute the ringtone of an incoming call. • In Camera mode, using it as the capture key allows you to take a photo. 56 1.2 Getting started 1.2.1 Set up Removing or installing the back cover Inserting or removing the SIM card You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card. 4028A 4028E Place the SIM card with the chip facing down and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out. For dual SIM models, both SIM1 and SIM2 can support 2G and 3G networks. If both of them are 3G SIM cards, only one card can support 3G network (1) . Your phone only supports mini-SIM card. Do not attempt to insert other SIM types, such as micro and nano cards, otherwise you may damage your phone. (1) 4028E only. Installing or removing the battery Please power off your phone before removing the battery. • Insert and click the battery into place, then close the cover. • Unclip the cover, then remove the battery. Installing or removing the microSD card To install, please open the microSD card lock first, then place the external microSD card into the slot with the gold contact facing down. To remove the external microSD card, please open the microSD card lock and take it out from the slot. Charging the battery Connect the battery charger to your phone and plug it into the socket. If the battery is very low, there will be no indication that power is being received until the charge is sufficient to show the charging status bar. To reduce power consumption and energy waste, once the battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. 78 1.2.2 Power on your phone Hold down the Power key until the phone powers on. It will take a few seconds before the screen lights up. Set up your phone for the first time The first time you power on the phone, you should set the following options: language, input method, Google account, etc. If you power on your phone with no SIM card inserted, you can connect to a Wi-Fi network to sign into your Google account to use some features. For dual SIM mode, you should select a SIM card or choose Always ask for voice call, messaging, etc (1) . 1.2.3 Power off your phone Hold down the Power key until the Phone options appear, select Power off. 1.3 Home screen You can bring all of the items (applications, shortcuts, folders widgets) you love or use most frequently to your Home screen for quick access. Touch the Home key to switch to Home screen. Status bar • Status/Notification indicators • Touch and drag down the screen to open the notification panel. Application tab • Touch to open main menu. Search bar • Touch  to enter text search screen. • Touch  to enter voice search screen. Favorite applications tray • Touch to enter the application. • Touch and hold to move or change applications. Add a location to display local weather. (1) 4028E only. Home screen is provided in an extended format to allow more space for adding applications, shortcuts etc. Slide the Home screen horizontally left and right to get a complete view of the Home screen. The row of small squares at the lower part of the screen indicates which screen you are viewing. 1.3.1 Using the touchscreen Touch To access an application, touch it with your finger. Touch and Hold Touch and hold the Home screen to access the available options for setting the Home screens. Drag Place your finger on any item to drag it to another location. Slide/Swipe Slide the screen to scroll up and down the application…

Text truncated - open the document above for the full version.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com Date 2015-03-24 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Terminals Test Lab of China Academy of Telecommunication Research of MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

©Copyright. All rights reserved by CTTL. SAR TEST REPORT No. I15Z40570-SEM01 For TCL Communication Ltd HSUPA/HSDPA/UMTS Tri-band/GSM Quad-band mobile phone Model Name: 4028E,4028J With Hardware Version: PIO Software Version: v6D18 FCC ID: 2ACCJH016 Issued Date: 2015-03-26 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 51 Shouxiang Science Building, Xueyuan Road, Haidian District, Beijing, P. R. China100191 Te l:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email: [email protected], website:www.chinattl.com TESTING CNAS L0570 No. I15Z40570-SEM01 Page 2 of 135 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Issue Date Description I15Z40570-SEM01 Re v.0 2015-03-26 Initial creation of test report No. I15Z40570-SEM01 Page 3 of 135 ©Copyright. All rights reserved by CTTL. TABLE OF CONTENT 1 TEST LABORATORY .................................................................................................................... 5 1.1 TESTING LO C AT I O N ........................................................................................................................................ 5 1.2 TESTING ENVIRONMENT ................................................................................................................................. 5 1.3 PROJECT DATA ............................................................................................................................................... 5 1.4 SIGNATURE ..................................................................................................................................................... 5 2 STATEMENT OF COMPLIANCE .................................................................................................. 6 3 CLIENT INFORMATION ................................................................................................................ 8 3.1 APPLICANT INFORMATION .............................................................................................................................. 8 3.2 MANUFACTURER INFORMATION ..................................................................................................................... 8 4 EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ................................. 9 4.1 ABOUT EUT ................................................................................................................................................... 9 4.2 INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .......................................................................... 9 4.3 INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ............................................................................ 9 5 TEST METHODOLOGY .............................................................................................................. 10 5.1 APPLICABLE LIMIT REGULATIONS ................................................................................................................ 10 5.2 APPLICABLE MEASUREMENT STANDARDS .................................................................................................... 10 6 SPECIFIC ABSORPTION RATE(SAR) ....................................................................................... 11 6.1 INTRODUCTION ............................................................................................................................................. 11 6.2 SAR DEFINITION .......................................................................................................................................... 11 7 TISSUE SIMULATING LIQUIDS ................................................................................................. 12 7.1 TARGETS FOR TISSUE SIMULATING LIQUID .................................................................................................... 12 7.2 DIELECTRIC PERFORMANCE ......................................................................................................................... 12 8 SYSTEM VERIFICATION ............................................................................................................ 16 8.1 SYSTEM SETUP ............................................................................................................................................. 16 8.2 SYSTEM VERIFICATION ................................................................................................................................. 17 9 MEASUREMENT PROCEDURES .............................................................................................. 18 9.1 TESTS TO BE PERFORMED ............................................................................................................................. 18 9.2 GENERAL MEASUREMENT PROCEDURE ........................................................................................................ 19 9.3 WCDMA MEASUREMENT PROCEDURES FOR SAR ...................................................................................... 20 9.4 BLUETOOTH &WI-FI MEASUREMENT PROCEDURES FOR SAR ..................................................................... 21 9.5 POWER DRIFT ............................................................................................................................................... 21 10 AREA SCAN BASED 1-G SAR ................................................................................................. 22 10.1 REQUIREMENT OF KDB .............................................................................................................................. 22 10.2 FAST SAR ALGORITHMS ............................................................................................................................ 22 11 CONDUCTED OUTPUT P…

Text truncated - open the document above for the full version.

No. I15Z40570-SEM01 Page 46 of 13 5 ©Copyright. All rights reserved by CTTL. Fig. 1-1 Z-Scan at power reference point (850 MHz) No. I15Z40570-SEM01 Page 47 of 13 5 ©Copyright. All rights reserved by CTTL. 850 Body Rear High Date: 2015- 03-04 Electronics: DAE4 Sn777 Medium: Body 850 MHz Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.97 S/m; ε r = 54.221; ρ = 1000 kg/m 3 Ambient Temperature: 22.5 o C Liquid Temperature: 22.0 o C Communication System: GSM 850 GPRS Frequency: 848.8 MHz Duty Cycle: 1:8.3 Probe: EX3DV4 - SN3846 ConvF(9.09, 9.09, 9.09) Rear High/Area Scan (101x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.918 W/kg Rear High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.85 V/m; Power Drift = -0.04 dB Peak SAR (extrapolated) = 1.03 W/kg SAR(1 g) = 0.830 W/kg; SAR(10 g) = 0.632 W/kg Maximum value of SAR (measured) = 0.907 W/kg Fig.2 850 MHz No. I15Z40570-SEM01 Page 48 of 13 5 ©Copyright. All rights reserved by CTTL. Fig. 2-1 Z-Scan at power reference point (850 MHz) No. I15Z40570-SEM01 Page 49 of 13 5 ©Copyright. All rights reserved by CTTL. GSM1900 Left Cheek Low Date: 2015- 03-05 Electronics: DAE4 Sn777 Medium: Head 1900 MHz Medium parameters used (interpolated): f = 1850.2 MHz; σ = 1.334 S/m; ε r = 41.017; ρ = 1000 kg/m 3 Ambient Temperature: 22.5 o C Liquid Temperature: 22.0 o C Communication System: GSM 1900MHz Frequency: 1850.2 MHz Duty Cycle: 1:8.3 Probe: EX3DV4 - SN3846 ConvF(7.26, 7.26, 7.26) Cheek Low/Area Scan (61x111x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.473 W/kg Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.423 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.635 W/kg SAR(1 g) = 0.413 W/kg; SAR(10 g) = 0.253 W/kg Maximum value of SAR (measured) = 0.447 W/kg Fig.3 1900 MHz No. I15Z40570-SEM01 Page 50 of 13 5 ©Copyright. All rights reserved by CTTL. Fig. 3-1 Z-Scan at power reference point (1900 MHz) No. I15Z40570-SEM01 Page 51 of 13 5 ©Copyright. All rights reserved by CTTL. GSM1900 Body Bottom High Date: 2015- 03-05 Electronics: DAE4 Sn777 Medium: Body 1900 MHz Medium parameters used: f = 1910 MHz; σ = 1.51 S/m; ε r = 54.276; ρ = 1000 kg/m 3 Ambient Temperature: 22.5 o C Liquid Temperature: 22.0 o C Communication System: GSM 1900MHz GPRS Frequency: 1910 MHz Duty Cycle: 1:2 Probe: EX3DV4 - SN3846 ConvF(7.15, 7.15, 7.15) Bottom High/Area Scan (101x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.811 W/kg Bottom High/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.31 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 1.07 W/kg SAR(1 g) = 0.645 W/kg; SAR(10 g) = 0.352 W/kg Maximum value of SAR (measured) = 0.769 W/kg Fig.4 1900 MHz No. I15Z40570-SEM01 Page 52 of 13 5 ©Copyright. All rights reserved by CTTL. Fig.4-1 Z-Scan at power reference point (1900 MHz) No. I15Z40570-SEM01 Page 53 of 13 5 ©Copyright. All rights reserved by CTTL. WCDMA 850 Left Cheek Middle Date: 2015- 03-04 Electronics: DAE4 Sn777 Medium: Head 850 MHz Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.925 S/m; ε r = 42.657; ρ = 1000 kg/m 3 Ambient Temperature: 22.5 o C Liquid Temperature: 22.0 o C Communication System: WCDMA; Frequency: 836.4 MHz; Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(9.18, 9.18, 9.18) Cheek Middle/Area Scan (61x111x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.772 W/kg Cheek Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.27 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 0.860 W/kg SAR(1 g) = 0.691 W/kg; SAR(10 g) = 0.525 W/kg Maximum value of SAR (measured) = 0.784 W/kg Fig.5 WCDMA 850 No. I15Z40570-SEM01 Page 54 of 13 5 ©Copyright. All rights reserved by CTTL. Fig. 5-1 Z-Scan at power reference point (WCDMA 850) No. I15Z40570-SEM01 Page 55 of 13 5 ©Copyright. All rights reserved by CTTL. WCDMA 850 Body Rear Middle Date: 2015- 03-04 Electronics: DAE4 Sn777 Medium: Body 850 MHz Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.957 S/m; ε r = 54.334; ρ = 1000 kg/m 3 Ambient Temperature: 22.5 o C Liquid Temperature: 22.0 o C Communication System: WCDMA; Frequency: 836.4 MHz; Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(9.09, 9.09, 9.09) Rear Middle/Area Scan (101x61x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.865 W/kg Rear Middle/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.08 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.990 W/kg SAR(1 g) = 0.790 W/kg; SAR(10 g) = 0.596 W/kg Maximum value of SAR (measured) = 0.867 W/kg Rear Middle/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 29.08 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.749 W/kg SAR(1 g) = 0.520 W/kg; SAR(10 g) = 0.361 W/kg Maximum value of SAR (measured) = 0.645 W/kg Fig.6 WCDMA 850 No. I15Z40570-SEM01 Page 56 of 13 5 ©Copyright. All rights reserved by CTTL. Fig. 6-1 Z-Scan at power reference point (WCDMA850) No. I15Z40570-SEM01 Page 57 of 13 5 ©Copyright. All rights reserved by CTTL. WCDMA 1900 Left Cheek Low Date: 2015- 03-05 Electronics: DAE4 Sn777 Medium: Head 1900 MHz Medium parameters used (interpolated): f = 1852.4 MHz; σ = 1.336 S/m; ε r = 41.005; ρ = 1000 kg/m 3 Ambient Temperature: 22.5 o C Liquid Temperature: 22.0 o C Communication System: WCDMA 1900 Frequency: 1852.4 MHz Duty Cycle: 1:1 Probe: EX3DV4 - SN3846 ConvF(7.26, 7.26, 7.26) Cheek Low/Area Scan (61x111x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 0.827 W/kg Cheek Low/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.878 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 1.11 W/kg SAR(1 g) = 0.716 W/kg; SAR(10 g) = 0.437 W/kg Maximum…

Text truncated - open the document above for the full version.

No. I15Z40570-SEM01 Page 91 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 92 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 93 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 94 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 95 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 96 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 97 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 98 of 13 5 ©Copyright. All rights reserved by CTTL. ANNEX H Dipole Calibration Certificate 835 MHz Dipole Calibration Certificate No. I15Z40570-SEM01 Page 99 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 100 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 101 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 102 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 103 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 104 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 105 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 106 of 135 ©Copyright. All rights reserved by CTTL. 1900 MHz Dipole Calibration Certificate No. I15Z40570-SEM01 Page 107 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 108 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 109 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 110 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 111 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 112 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 113 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 114 of 13 5 ©Copyright. All rights reserved by CTTL. 2450 MHz Dipole Calibration Certificate No. I15Z40570-SEM01 Page 115 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 116 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 117 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 118 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 119 of 13 5 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 120 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 121 of 135 ©Copyright. All rights reserved by CTTL. No. I15Z40570-SEM01 Page 122 of 135 ©Copyright. All rights reserved by CTTL. ANNEX I SPOT CHECK TEST As the test lab for 4028E,4028J from TCL Communication Ltd., we, CTTL(Shouxiang), declare on our sole responsibility that, according to “Declaration of changes” provided by applicant, only the Spot check test should be performed. The test results are as below. I.1 Conducted power of selected case Table I.1: The conducted power results for GSM850/1900 GSM 850MHz Conducted Power (dBm) Channel 251(848.8MHz) Channel 190(836.6MHz) Channel 128(824.2MHz) 32.82 / / GSM 1900MHz Conducted Power(dBm) Channel 810(1909.8MHz) Channel 661(1880MHz) Channel 512(1850.2MHz) / / 29.56 Table I.2: The conducted power results for GPRS GSM 850 GPRS (GMSK) Measured Power (dBm) 251 190 128 1 Txslot 32.83 / / PCS1900 GPRS (GMSK) Measured Power (dBm) 810 661 512 4 Txslots 24.21 / / Table I.3: The conducted power results for WCDMA Item band FDD V result ARFCN 4233 (846.6MHz) 4182 (836.4MHz) 4132 (826.4MHz) WCDMA \ / 23.00 / Item band FDD II result ARFCN 9538 (1907.6MHz) 9400 (1880MHz) 9262 (1852.4MHz) WCDMA \ / 23.03 22.99 No. I15Z40570-SEM01 Page 123 of 135 ©Copyright. All rights reserved by CTTL. I.2 Spot Check test results Table I.4: SAR Values (GSM 850 MHz Band - Head) – CAB60B0000C1 Ambient Temperature: 22.4 o C Liquid Temperature: 22.0 o C Frequency Side Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g)( W/kg) Power Drift (dB) MHz Ch. 848.8 251 Left Touch Fig.I.1 32.82 33.3 0.413 0.46 0.552 0.62 -0.03 Table I.5 : SAR Values (GSM 850 MHz Band-Body) – CAB60B0000C1 Ambient Temperature: 22.4 o C Liquid Temperature: 22.0 o C Frequency Mode (number of timeslots) Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 848.8 251 GPRS (1) Rear Fig.I.2 32.83 33.3 0.447 0.50 0.591 0.66 -0.01 Note1: The distance between the EUT and the phantom bottom is 10mm. Table I.6 : SAR Values (GSM1900 MHz Band - Head) – CAB60B0000C1 Ambient Temperature: 22.4 o C Liquid Temperature: 22.0 o C Frequency Side Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g)( W/kg) Power Drift (dB) MHz Ch. 1850.2 512 Left Touch Fig.I.3 29.56 30.3 0.252 0.30 0.395 0.47 0.04 Table I.7 : SAR Values (GSM 1900 MHz Band-Body) – CAB60B0000C1 Ambient Temperature: 22.4 o C Liquid Temperature: 22.0 o C Frequency Mode (number of timeslots) Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g) (W/kg) Power Drift (dB) MHz Ch. 1909.8 810 GPRS (4) Bottom Fig.I.4 24.21 25.0 0.300 0.36 0.551 0.66 -0.14 Note1: The distance between the EUT and the phantom bottom is 10mm. Table I.8 : SAR Values (WCDMA 850 MHz Band - Head) – CAB60B0000C1 Ambient Temperature: 22.4 o C Liquid Temperature: 22.0 o C Frequency Side Te s t Position Figure No. Conducted Power (dBm) Max. tune-up Power (dBm) Measured SAR(10g) (W/kg) Reported SAR(10g) (W/kg) Measured SAR(1g) (W/kg) Reported SAR(1g)( W/kg) Power Drift (dB) MHz Ch. 836.4 4182 Left Touch Fig.I.5 23.00 24.0 0.506 0.64 0.659 0.83 0.00 No. I15Z40570-SEM01 Page 124…

Text truncated - open the document above for the full version.

©Copyright. All rights reserved by CTTL. TEST REPORT No. I15Z40570-GTE01 for TCL Communication Ltd. HSUPA/HSDPA/UMTS Tri-band/GSM Quad-band mobile phone Model Name: 4028E, 4028J FCC ID: 2ACCJH016 with Hardware Version: PIO Software Version: v6D18 Issued Date: 2015-03-27 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: FCC 2.948 Listed: No. 525429 CTTL,Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512, Fax:+86(0)10-62304633-2504 Email: [email protected] , website: www.chinattl.com No. I15Z40570-GTE01 Page2 of 73 ©Copyright. All rights reserved by CTTL. CONTENTS 1. TEST LABORATORY ......................................................................................................................... 3 1.1. TESTING LOCATION .................................................................................................................... 3 1.2. TESTING ENVIRONMENT ........................................................................................................... 3 1.3. PROJECT DATA .............................................................................................................................. 3 1.4. SIGNATURE ..................................................................................................................................... 3 2. CLIENT INFORMATION ................................................................................................................... 4 2.1. APPLICANT INFORMATION ....................................................................................................... 4 2.2. MANUFACTURER INFORMATION ............................................................................................ 4 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 5 3.1. ABOUT EUT ..................................................................................................................................... 5 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST .................................... 5 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ....................................... 5 3.4. NORMAL ACCESSORY SETTING ............................................................................................... 7 3.5. GENERAL DESCRIPTION ............................................................................................................ 7 4. REFERENCE DOCUMENTS ............................................................................................................. 8 4.1. REFERENCE DOCUMENTS FOR TESTING ............................................................................. 8 5. LABORATORY ENVIRONMENT ..................................................................................................... 9 6. SUMMARY OF TEST RESULTS ..................................................................................................... 10 7. TEST EQUIPMENTS UTILIZED ..................................................................................................... 11 ANNEX A: MEASUREMENT RESULTS ................................................................................................ 12 A.1 OUTPUT POWER ........................................................................................................................... 12 A.2 EMISSION LIMIT ........................................................................................................................... 18 A.3 FREQUENCY STABILITY ............................................................................................................ 24 A.4 OCCUPIED BANDWIDTH .............................................................................................................. 26 A.5 EMISSION BANDWIDTH ................................................................................................................ 39 A.6 BAND EDGE COMPLIANCE .......................................................................................................... 51 A.7 CONDUCTED SPURIOUS EMISSION............................................................................................ 58 No. I15Z40570-GTE01 Page3 of 73 ©Copyright. All rights reserved by CTTL. 1. Test Laboratory 1.1. Testing Location Company Name: CTTL,Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China 100191. Postal Code: 100191 Telephone: 00861062304633 Fax: 00861062304793 1.2. Testing Environment Normal Temperature: 15-35°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2015-02-13 Testing End Date: 2015-03-20 1.4. Signature Zi Xiaogang (Prepared…

Text truncated - open the document above for the full version.