2ACCJH017HSUPA/HSDPA/UMTS Triple band/GSM Quad band mobile phone

12 English - CJB2867ALAAA Quick Start Guide For more information about how to use the phone, please go to www.alcatelonetouch.com to download the complete user manual. Also on our website you can find helpful FAQs, perform software upgrades, etc. www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the RADIOWAVES section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. 1 Your mobile .................. 1.1 Keys and connectors Headset connector micro-USB connector Back key Home key Menu key Touch screen Front camera 34 Volume up Volume down Camera Flash/Torch Power key Menu key • Option menu. Touch to access Manage Home- screen, Add widgets, Manage applications, Wallpaper and Settings. • Recent apps. Touch and hold to open a list of thumbnail images of apps you've worked with recently. Touch it to open an app. Swipe it up or down to remove a thumbnail from the list. Home key • While on any application or screen, touch to return to the Home screen. • While on lock screen (the screen is lighted up), touch and hold the Home key to turn on the torch. Back key • Touch to go back to the previous screen, or to close a dialog box, options menu, the notification panel, etc. Power key • Press: Lock the screen/Light up the screen. • Press and hold: Power on or generate a pop up menu selecting from Power off/Restart/Airplane mode or icons of Ringer mode. • Press to mute the ringtone when there’s an incoming call. • Press and hold for more than 7 seconds to restart the phone when the system halted. • Press and hold Power key and Volume down key to capture a screenshot. • Press and hold Power key and Volume up key under power off mode to restore factory set. Volume keys • Under call mode, adjust the earpiece or headset volume. • In Music/Video/Streaming mode, adjust the media volume. • In general mode, adjust the ring tone volume. • Mute the ringtone of an incoming call. 56 1.2 Getting started 1.2.1 Set-up Removing or installing the back cover Inserting or removing the SIM card You must insert your SIM card to make phone calls. Please power off your phone before inserting or removing the SIM card. 4009A 4009E SIM1 SIM2 Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out. For dual SIM models, both SIM1 and SIM2 can support 2G and 3G networks. If both of them are 3G SIM cards, only one card can support 3G network (1) . Your phone only supports mini-SIM card. Do not attempt to insert other SIM types like micro and nano cards, otherwise you may damage your phone. (1) 4009E only. Installing or removing the battery Please power off your phone before removing the battery. • Insert and click the battery into place, then close the cover. • Unclip the cover, then remove the battery. Installing the microSD card To install, please open microSD card lock first, and then place the external microSD card into the slot with the gold contact facing down. To remove the external microSD card, please open microSD card lock and take it out from the slot. Charging the battery Connect the battery charger to your phone and outlet respectively. If the battery is very low, there will be no indication that power is being received until the charge is sufficient enough to show the charging status bar. To reduce power consumption and energy waste, once the battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or applications running in the background when not in use; reduce the backlight time, etc. 78 1.2.2 Power on your phone Hold down the Power key until the phone powers on. It will take a few seconds before the screen lights up. Set up your phone for the first time The first time you power on the phone, you should set the following options: language, input method, date & time, Google account, etc. If you power on your phone with no SIM card inserted, you can connect to a Wi-Fi network to sign into your Google account and to use some features. For dual SIM mode, you should select a SIM card or choose Always ask for voice call, messaging, etc. (1) 1.2.3 Power off your phone Hold down the Power key until the Phone options appear, select Power off. 1.3 Home screen You can bring all the items (applications, shortcuts, folders and widgets) you love or use most frequently to your Home screen for quick access. Touch the Home key to switch to Home screen. Status bar • Status/Notification indicators • Touch and drag down to open the notification panel. Application tab • Touch to open main menu. Search bar (2) • Touch  to enter text search screen. • Touch  to enter voice search screen. Favorite applications tray • Touch to enter the application. • Touch and hold to move or change applications. Add a location to display local weather. Home screen is provided in an extended format to allow more space for adding applications, shortcuts etc. Slide the Home screen horizontally left and right to get a complete view of the Home screen. The row of small circles at the lower part of the screen indicates which screen you are viewing. (1) 4009E only. (2) Depends on software version. 1.3.1 Using the touchscreen Touch To access an application, touch it with your finger. Touch and Hold Touch and hold the home screen to access the available options for setting the home screens. Drag Place your finger on any item to drag it to another location. Slide/Swipe Slid…

Text truncated - open the document above for the full version.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Te l : +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com 2015-02-09 Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Permanent Confidentiality request for FCC ID: 2ACCJH017 To Whom It May Concern, Pursuant to sections 0.457 and 0.459 of CFR 47, the applicant requests permanent confidential treatment of the following information accompanying this application: - Block Diagram - Schematics - Operational Description - BOM list/Tune-Up-Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. Yours Sincerely, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com Date 2014-07-27 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL, Telecommunication Technology labs, Academy of Telecommunication Research, MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc.(ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

Date: February 10, 2015 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request permission to use Wi-Fi / Bluetooth/ GSM/ WCDMA test results from model 4009F in our applications for model 4009A FCC ID: 2ACCJH017 To whom it may concern: We request permission to use Wi-Fi / Bluetooth/ GSM/ WCDMA test results from model 4009F(FCC ID: 2ACCJH012) in our applications for model 4009A(FCC ID: 2ACCJH017). Models 4009F and 4009A share the same enclosure, main logic board, display, battery and I/O design. All three models use the same Wi-Fi / Bluetooth chipset/module and antennas, and operate using the same transmit power levels. Also, all two models run the same iOS software. Model 4009A is a mobile phone device that difference of camera, detail information as below. 4009F rear camera 4009A rear camera 2M 5M 24 pin Soldering type 24 pin BTB type Sincerely, Project Manager: 黄正仙 Signature : Date: 2015-02-12

EUT photograph Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone

Internal Photo Mobile phone Disassembly Mobile phone Disassembly Mobile phone Disassembly Mobile phone Disassembly

©Copyright. All rights reserved by CTTL. FCC PART 15C TEST REPORT No. I15Z40216-SRD01 for TCL Communication Ltd. HSUPA/HSDPA/UMTS Triple band/GSM Quad band mobile phone Model Name: 4009A FCC ID: 2ACCJH017 with Hardware Version: PIO Software Version: v4B2A Issued Date: 2015-02-09 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected], website:www.chinattl.com TESTING CNAS L0570 No. I15Z40216-SRD01 Page2 of 91 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Description Issue Date I15Z40216-SRD01 Rev.0 1st edition 2015-02-09 No. I15Z40216-SRD01 Page3 of 91 ©Copyright. All rights reserved by CTTL. CONTENTS 1. TEST LABORATORY ............................................................................................................... 4 1.1. TESTING LOCATION ........................................................................................................... 4 1.2. TESTING ENVIRONMENT ................................................................................................... 5 1.3. PROJECT DATA ................................................................................................................... 5 1.4. SIGNATURE .......................................................................................................................... 5 2. CLIENT INFORMATION ........................................................................................................... 6 2.1. APPLICANT INFORMATION ................................................................................................ 6 2.2. MANUFACTURER INFORMATION ...................................................................................... 6 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................ 7 3.1. ABOUT EUT .......................................................................................................................... 7 3.2. INTERNAL IDENTIFICATION OF EUT ................................................................................ 7 3.3. INTERNAL IDENTIFICATION OF AE ................................................................................... 7 3.4. NORMAL ACCESSORY SETTING ............................................................................................. 7 3.5. GENERAL DESCRIPTION ....................................................................................................... 7 4. REFERENCE DOCUMENTS .................................................................................................... 8 4.1. DOCUMENTS SUPPLIED BY APPLICANT ........................................................................ 8 4.2. REFERENCE DOCUMENTS FOR TESTING ...................................................................... 8 5. TEST RESULTS........................................................................................................................ 9 5.1. SUMMARY OF TEST RESULTS ................................................................................................ 9 5.2. STATEMENTS........................................................................................................................ 9 6. TEST FACILITIES UTILIZED ................................................................................................. 10 ANNEX A: DETAILED TEST RESULTS ........................................................................................ 11 A.1. MEASUREMENT METHOD ........................................................................................................ 11 A.2. PEAK OUTPUT POWER – CONDUCTED .................................................................................... 12 A.3. FREQUENCY BAND EDGES – CONDUCTED .............................................................................. 13 A.4. CONDUCTED EMISSION .......................................................................................................... 20 A.5. RADIATED EMISSION .............................................................................................................. 45 A.6. TIME OF OCCUPANCY (DWELL TIME) ....................................................................................... 65 A.7. 20DB BANDWIDTH ................................................................................................................. 75 A.8. CARRIER FREQUENCY SEPARATION ........................................................................................ 81 A.9. NUMBER OF HOPPING CHANNELS .......................................................................................... 84 A.10. AC POWERLINE CONDUCTED EMISSION ............................................................................... 88 ANNEX B: ACCREDITATION CERTIFICATE ............................................................................... 91 No. I15Z40216-SRD01 Page4 of 91 ©Copyright. All rights reserved by CTTL. 1. Test Laboratory 1.1. Testing Location Location 1:CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China100191 Location 2:CTTL(Shouxiang) Address: No. 51 Shouxiang Science Building, Xueyuan Road, Haidian District, Beijing, P. R. China100191 No. I15Z40216-SRD01 Page5 of 91 ©Copyright. All rights reserved by CTTL. 1.2. Testing Environment Normal Temperature: 15-35°C Extreme Temperature: -10/+55°C Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2014-12-21 Testing End Date: 2014-12-18 1.4. Signature Xu Zhongfei (Prepared this test report) Li Zhibin (Reviewed this test report) Lv Songdong (Approvedthis test report) No. I15Z40216-SRD01 Page6 of 91 ©Copyri…

Text truncated - open the document above for the full version.

Mobilephone Mobilephone Mobilephone Mobilephone Mobilephone Mobilephone Mobilephone Mobilephone Mobilephone