2ACCJH025HSUPA/HSDPA/UMTS Quad-band/GSM Quad-band mobile phone

12 www.sar-tick.com This product meets applicable national SAR limits of 1.6 W/kg. The specific maximum SAR values can be found in the RADIOWAVES section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 10 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call. English - CJB28D5ALAAA Quick Start Guide For more information about how to use your phone, please visit www.alcatelonetouch.com to download the complete user manual. From the website, you can consult the FAQ, perform software upgrades, etc.


 PROTECT YOUR HEARING To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use. 1 Your mobile ������������������ 1�1 Keys and connectors Headset connector Micro-USB connector Back key Home key Recents key Touch screen Front Camera Pop 35_5016A_5016J US QG_Eng_EN_04_150717.indd 1-22015/7/17 16:50:08 34 Power key • Press: Lock the screen/Light up the screen. • Press and hold: Show the popup menu to select from Restart/ Power off/Aeroplane mode� • Press and hold the Power key and Volume down key to capture a screenshot. • Press and hold the power key for at least 10 seconds to force reboot or hold it longer to power off. Volume Keys • In call mode, adjusts the earpiece or headset volume. • In Music/Video/Streaming mode, adjusts the media volume. • In general mode, adjusts the ringtone volume. • Mutes the ringtone of an incoming call. Volume up Volume down Camera Flash/Torch Power key Recents key • Recent apps� Touch to open a list of thumbnail images of apps you've worked with recently. Touch it to open an app. Swipe it left or right to remove a thumbnail from the list. Home key • From any application or screen, touch to return to the Home screen. • Long press to open Google search. Back key • Touch to go back to the previous screen, or to close a dialog box, options menu, the notification panel, etc. Pop 35_5016A_5016J US QG_Eng_EN_04_150717.indd 3-42015/7/17 16:50:09 56 Installing or removing the battery Power off your phone before removing the battery. • Insert and click the battery into place, then close the cover. • Unclip the cover, then remove the battery. Installing or removing the microSD card To install, insert the microSD card first, and then place it into the slot with the gold contact facing down. To remove the external microSD card, slide and take it out from the slot. Charging the battery Connect battery charger to your phone and plug into the socket. If the battery is very low, there will be no indication that power is being received until the charge is sufficient to show the charging status bar. To reduce power consumption and energy waste, once the battery is fully charged, disconnect your charger from the plug; switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the backlight time, etc. 1�2 Getting started 1�2�1 Set up Removing or installing the back cover Inserting or removing the SIM card You must insert your SIM card to make phone calls. Power off your phone before inserting or removing the SIM card. SIM1 Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted. To remove the card, press and slide it out. SIM2 (1) Release the SIM card holder by sliding it in the direction of the arrow and lift it. Insert the SIM card with the gold contacts facing down and make sure the SIM card is put flatly. Lower the SIM card holder and slide it in the opposite direction to lock it. For dual SIM models, both SIM1 and SIM2 can support 2G and 3G networks. If both of them are 3G SIM cards, only one card can support 3G network (1) . Your phone only supports micro-SIM card. Do not attempt to insert other SIM types like mini and nano cards, otherwise you may damage your phone. (1) 5016J only. Pop 35_5016A_5016J US QG_Eng_EN_04_150717.indd 5-62015/7/17 16:50:13 78 1�3�1 Using the touchscreen Touch To access an application, touch it with your finger. Long press Long press the item to enter the available options. Drag Place your finger on the screen to drag an object to another location. Slide/Swipe Slide the screen up and down to scroll through the applications, images, web pages, etc. Flick Similar to swiping, but flicking makes it move quicker. Pinch/Spread Place your fingers of one hand on the screen surface and draw them apart or together to scale an element on the screen. Rotate Automatically change the screen orientation from portrait to landscape by turning the phone sideways to have a better view. 1�3�2 Status bar From the status bar, you can see both phone status (to the right side) and notification information (to the left side). 1�2�2 Power on your phone Hold down the Power key until the phone powers on. It will take a few seconds before the screen lights up. Set up your phone for the first time The first time you power on the phone, you should set the following options: Language, Google account, etc. Even if no SIM card is installed, your phone will still power on and you will be able to connect to a Wi-Fi network, sign into your Google account and use some of the phone's features. 1�2�3 Power off your phone Hold down the Power key from the Home screen until the phone options appear, select Power off. 1�3 Home screen You can move all of the items (applications, shortcuts, folders and widgets) you use most frequently to your Home screen for quick access. Touch the Home key to switch to the Home screen. Touch to enter application list. Status bar • Status/Notification indicators • Touch and drag down to open the notification panel. Touch an icon to open an application, folder, etc. Favourite tray applications • Touch to enter the application. •…

Text truncated - open the document above for the full version.

5 Z S TCL Communic 5F, C building, N ZhangJiang Hig Shanghai, P.R. Tel: +86 21 61 4 201 Fe d Offi Equ 734 Colu Sub To W Purs con - Bl - Sc - Op - BO The rele app Yo u Zhiz Prod TCL cation Ltd. No. 232, Liang J gh-Tech Park, P China. 201203 46 0666 Fax: + 5-07-01 deral Comm fice of Engin uipment Aut 45 Oakland M umbia, Mar bject: Perma Whom It M suant to sec fidential tre lock Diagra chematics perational D OM list/Tun e above mat eased to the licant and p urs Sincerel zhou GONG duct Certifi L Commun Jing Road, udong +86 21 6146 06 munications C neering and thorization Mills Road ryland 2104 anent Confid May Concern ctions 0.457 eatment of th am Description ne-Up-Proce erials conta public. The provide unju ly, G cation Ma n nication Lt 02 Commission d Technolog Division 46 dentiality re n, 7 and 0.459 he followin edure ain trade sec e public disc ustified ben nager td. n gy equest for F of CFR 47, ng informati crets and pro closure of th efits to its c FCC ID: 2AC the applica ion accompa oprietary in hese matter competitors CCJH025 ant requests anying this nformation n s might be h . htt permanent applicatio n not customa harmful to t p://tclcom.tcl.co n: arily the om

TCL Communication Ltd. 5F, C building, No. 232, Liang Jing Road, ZhangJiang High-Tech Park, Pudong Shanghai, P.R. China. 201203 Tel: +86 21 6146 0666 Fax: +86 21 6146 0602 http://tclcom.tcl.com Date 2015-07-01 To: Federal Communications Commission, Authorization & Evaluation Division, 7345 Oakland Mills Road Columbia, MD 21046 And American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: CTTL-Terminals Test Lab of China Academy of Telecommunication Research of MIIT is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, which includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Regards, Zhizhou GONG Product Certification Manager TCL Communication Ltd.

EUT photograph Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile Phone Mobile phone Charger AE1 Label of Charger AE1 Charger AE2 Label of Charger AE2 USB Cable AE3 USB Cable AE4 USB Cable AE5 USB Cable AE6 Headset AE7 Headset AE8 Headset AE9 Headset AE10 Headset AE11 Headset AE12 Headset AE13 Headset AE14 Battery AE15 Battery AE15-1 Battery AE16 Battery AE16-1

EUT Interior photograph Mobile Phone Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly Mobile Phone Disassembly

©Copyright. All rights reserved by CTTL. FCC PART 15C TEST REPORT No. I15Z41315-SRD02 for TCL Communication Ltd. HSUPA/HSDPA/UMTS Quad-band/GSM Quad-band mobile phone MODEL NAME: 5016A with FCC ID: 2ACCJH025 Hardware Version: PIO Software Version: v1A1D Issued Date: 2015-07-03 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of CTTL. Test Laboratory: CTTL, Telecommunication Technology Labs, Academy of Telecommunication Research, MIIT No.52, HuayuanNorth Road, Haidian District, Beijing, P. R. China 100191. Tel:+86(0)10-62304633-2512,Fax:+86(0)10-62304633-2504 Email:[email protected], website:www.chinattl.com TESTING CNAS L0570 No. I15Z41315-SRD02 Page2 of 90 ©Copyright. All rights reserved by CTTL. REPORT HISTORY Report Number Revision Description Issue Date I15Z41315-SRD02 Rev.0 1st edition 2015-07-03 No. I15Z41315-SRD02 Page3 of 90 ©Copyright. All rights reserved by CTTL. CONTENTS 1. TEST LABORATORY ............................................................................................................. 4 1.1. TESTING LOCATION .......................................................................................................... 4 1.1. TESTING ENVIRONMENT .................................................................................................. 4 1.2. PROJECT DATA.................................................................................................................. 4 1.3. SIGNATURE ........................................................................................................................ 4 2. CLIENT INFORMATION .......................................................................................................... 5 2.1. APPLICANT INFORMATION .............................................................................................. 5 2.2. MANUFACTURER INFORMATION ..................................................................................... 5 3. EQUIPMENT UNDERTEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 6 3.1. ABOUT EUT ........................................................................................................................ 6 3.2. INTERNAL IDENTIFICATION OF EUT ............................................................................... 6 3.3. INTERNAL IDENTIFICATION OF AE .................................................................................. 6 3.4. N ORMAL ACCESSORY SETTING ............................................................................................ 6 3.5. G ENERAL DESCRIPTION ...................................................................................................... 7 4. REFERENCE DOCUMENTS .................................................................................................. 7 4.1. DOCUMENTS SUPPLIED BY APPLICANT ........................................................................ 7 4.2. REFERENCE DOCUMENTS FOR TESTING ...................................................................... 7 5. TEST RESULTS ...................................................................................................................... 8 5.1. S UMMARY OF TEST RESULTS .............................................................................................. 8 5.2. S TATEMENTS ...................................................................................................................... 8 6. TEST FACILITIES UTILIZED .................................................................................................. 9 ANNEX A: DETAILED TEST RESULTS ...................................................................................... 10 A.1. MEASUREMENT METHOD ...................................................................................................... 10 A.2. PEAK OUTPUT POWER – CONDUCTED ................................................................................... 11 A.3. FREQUENCY BAND EDGES – CONDUCTED ............................................................................. 12 A.4. CONDUCTED EMISSION......................................................................................................... 20 A.5. RADIATED EMISSION ............................................................................................................. 45 A.6. TIME OF OCCUPANCY (DWELL TIME) ...................................................................................... 64 A.7. 20DB BANDWIDTH ................................................................................................................ 74 A.8. CARRIER FREQUENCY SEPARATION ....................................................................................... 80 A.9. NUMBER OF HOPPING CHANNELS ......................................................................................... 83 A.10. AC POWERLINE CONDUCTED EMISSION .............................................................................. 87 ANNEX B: ACCREDITATION CERTIFICATE .............................................................................. 90 No. I15Z41315-SRD02 Page4 of 90 ©Copyright. All rights reserved by CTTL. 1. Test Laboratory 1.1. Testing Location Location 1:CTTL(huayuan North Road) Address: No. 52, Huayuan North Road, Haidian District, Beijing, P. R. China100191 Location 2:CTTL(Shouxiang) Address: No. 51 Shouxiang Science Building, Xueyuan Road, Haidian District, Beijing, P. R. China100191 1.2. Testing Environment Normal Temperature: 15-35°C Extreme Temperature: -10/+55Ԩ Relative Humidity: 20-75% 1.3. Project data Testing Start Date: 2015-06-11 Testing End Date: 2015-06-30 1.4. Signature Xu Zhongfei (Prepared this test report) Li Zhibin (Reviewed this test report) Lv Songdong (Approvedthis test report) No. I15Z41315-SRD02 Page5 of 90 ©Copyright. All rights reserved by CTTL. 2. Client Information 2.1. Applicant Information Company Name: TCL Communicat…

Text truncated - open the document above for the full version.

FDD Con D ID 2ACCJ nducted em JH025 mission RE Rad diated Spurrious Emisssion